This Government Contract opportunity from Ohio was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Confined Space Entry Permitting & Pre-Entry Evaluation

Closed

State & Local

Submission Closed08/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Warehouse, Warehouse Storage Area, and Gymnasium. Specifically, the project estimates the removal of approximately 3,600 square feet of floor tile in the warehouse areas and 600 square feet in the gymnasium if ACM is confirmed. All work must be performed by licensed contractors using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. This solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, acceptance of terms and conditions, proof of insurance, and three professional references by October 21, 2026, at 3:00 PM CT. Award selection will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination SCA 2015-5019 Rev 31, and requires strict adherence to Department of Labor records management, training, and privacy breach notification requirements. Final acceptance of work is contingent upon the submission of all laboratory reports, waste manifests, and a final project completion report.

POSTED

DEADLINE

Potable Water Testing and Biological AnalysisThis subcontract involves providing specialized laboratory testing services to ensure drinking water safety for prime contractors on CalVet projects at the Veterans Home of California in Redding. The scope of work requires the performance of semi-annual biological drinking water and coliform analysis to identify potential contaminants. To qualify, the service provider must utilize certified laboratory facilities and maintain current state or EPA certification for drinking water analysis. The project is managed under the California Department of Veterans Affairs and falls under NAICS code 541380. The selected contractor is responsible for delivering formal certified laboratory analysis reports documenting the results of the coliform and biological testing. The solicitation was posted on October 16, 2026, with a response deadline of October 30, 2026.

California Department of Veterans Affairs

POSTED

DEADLINE

26RS0012 - Water Testing and Analysis Services

Solicitation # 26RS0012

Solicitation 26RS0012 is a Small Business set-aside for the California Department of Veterans Affairs to obtain water testing and analysis services for the Veterans Home of California Redding. The contractor must provide all labor, equipment, and materials for the complete water analysis and preventative maintenance of potable drinking water, chilled and hot water systems, and condenser/cooling tower systems. Key responsibilities include quarterly assessments, semi-annual biological drinking water and Legionella control programs, annual cooling tower treatments, and necessary repairs to the Dolphin Transformer Panel, Coil Pipe assembly, and Webmaster One controller. The contractor is responsible for all sampling supplies, including bottles and coolers, and must provide safety data sheets for all chemicals delivered. To be eligible, the contractor must be a DGS-certified Small Business, Micro Business, or Disabled Veteran Business Enterprise and an authorized service provider for Evapco Cooling Towers and the Dolphin Water Treatment system series 3000. Personnel must hold a California Department of Pesticide Regulation Qualified Applicators License in Aquatic and Microbial Pest Control categories, and the contractor must provide at least two factory-trained certified technicians. Insurance requirements include Commercial General Liability of 1 million dollars per occurrence, Professional Liability of 1 million dollars per claim and 3 million dollars aggregate, and mandatory Workers Compensation. The contract will be awarded to the lowest responsive responsible quote, and the state maintains the right to terminate the agreement with thirty days written notice.

California Department of Veterans Affairs

POSTED

DEADLINE

Scientific Instrument Performance TestingThis subcontract opportunity involves providing scientific instrument performance testing for prime contractors working on projects for the Government of Ontario Ministry of Environment, Conservation and Parks. The selected provider will be responsible for verifying the measurement accuracy of handheld photosynthesis meters, specifically focusing on water vapour loss and CO2 uptake. These evaluations are to be conducted in either field or laboratory settings using reference plant materials or calibration gases, culminating in the delivery of a detailed performance testing report. Qualified candidates must possess technical certification in instrument calibration or plant physiology to ensure the precision of the testing. Interested parties should note that the response deadline is November 6, 2026, with the project falling under NAICS code 541380.

Environment, Conservation and Parks

POSTED

DEADLINE

CalEPA-Certified Laboratory Analysis ServicesThis subcontract opportunity with the California Department of Transportation involves providing specialized chemical analysis and testing services for waste streams on maintenance projects. The selected provider will be responsible for sampling and testing contaminated soil, liquids, and lab-packed materials to develop accurate waste profiles, ensuring full compliance for disposal processes. A critical requirement for this engagement is that the service provider must hold a CalEPA-certified Environmental Laboratory Accreditation Program certification. The primary deliverables include certified laboratory test reports and comprehensive waste stream profiles, with performance centered in Del Norte. Interested parties must respond by November 3, 2026.

California Department of Transportation

POSTED

DEADLINE

Specialized Structural Inspection & TestingThe Specialized Structural Inspection and Testing subcontract for OC Public Works involves providing technical specifications and oversight for structural material inspection and testing. The selected contractor will be responsible for defining testing requirements, preparing special inspection specifications, and conducting final structural punch-lists to ensure project compliance. Key deliverables include special inspection requirements documents, detailed inspection reports, and completed final punch-lists. Qualified candidates must hold ICC Certification or an equivalent professional credential. This opportunity is categorized under NAICS code 541380 and is open for responses until December 4, 2026. Interested parties can find further details through the OC Public Works procurement portal.

POSTED

DEADLINE

Post-Operation Wetted Materials AnalysisThis subcontract, titled Post-Operation Wetted Materials Analysis, involves providing technical examination services for prime contractors working on UK Atomic Energy Authority projects. The primary objective is to analyze materials that have been exposed to tritium during rig operations, with a particular emphasis on evaluating the performance and degradation of polytetrafluoroethylene (PTFE). The selected provider will be responsible for delivering a comprehensive material analysis report that details the condition and compatibility of the examined materials. This opportunity was posted on October 16, 2026, with a response deadline of November 16, 2026, and falls under NAICS code 541380.

UK Atomic Energy Authority

POSTED

DEADLINE

Vacuum Pump Tritium Testing

Solicitation # T044MN26

The UK Atomic Energy Authority has issued solicitation T044MN26 to commission an organization to design, manufacture, commission, and operate a tritium-compatible test rig. This rig must replicate the operating conditions of the Vacuum and Impurity Treatment System (VAC-ITS) and be hosted at the contractor's own licensed facility. A critical component of the project involves performing a post-operation examination of wetted materials, with a specific emphasis on polytetrafluoroethylene (PTFE). The estimated contract value is 400,000 GBP excluding VAT, with a performance period running from December 21, 2026, to April 30, 2027. The procurement process is open to small and medium-sized enterprises, with a tender submission deadline of November 16, 2026. Award decisions will be based on a weighted evaluation consisting of 60 percent quality and 40 percent price. Administration of the contract is managed by Maili Nugent at the Culham Science Centre. All proposals must be submitted in English via the designated electronic portal.

UK Atomic Energy Authority

POSTED

DEADLINE

Third-Party Quality Inspection and SamplingThis subcontract for Third-Party Quality Inspection and Sampling supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform independent sampling and inspection for prime contractors specifically for the 4820-01-223-8097 valve. Work involves executing sampling plans according to MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes using zero-based sampling plans, precision measurement, and pressure testing equipment. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in Jacksonville, Florida. The contractor is responsible for delivering comprehensive inspection reports and certifications of conformance. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace NDT and Heat TreatmentThis subcontract for the Defense Logistics Agency involves providing specialized material validation, heat treatment, and non-destructive testing services for aircraft trainer pod projects. The scope of work focuses on ensuring structural integrity through critical processes including X-ray and penetrant inspections, with a requirement for the delivery of certified test reports and detailed heat-treatment logs. Qualified providers must maintain aerospace testing certifications and strictly adhere to ITAR and EAR compliance standards. The project falls under NAICS code 541380 and is managed through the Department of Defense to support prime contractors in meeting rigorous aerospace safety and quality specifications.

Defense Logistics Agency

POSTED

DEADLINE

Critical Application Testing and InspectionThe Critical Application Testing and Inspection subcontract involves providing specialized pressure testing and non-destructive inspection services for prime contractors supporting DLA Land and Maritime fluid handling projects. Based in Mechanicsburg, Pennsylvania, the scope of work includes conducting hydrostatic pressure testing, dye penetrant inspection, and X-ray or ultrasonic testing to ensure the internal integrity of galleries. The successful provider must deliver detailed inspection reports and formal pressure test certifications. To qualify for this engagement, the contractor must employ NDT technicians holding Level II or III certifications. This opportunity is managed under the Department of Defense Fluid Handling Division with a NAICS code of 541380. Interested parties should note the response deadline of October 21, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Third-Party Aerospace Quality Testing and CertificationThis subcontract for Third-Party Aerospace Quality Testing and Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent quality testing and verification, utilizing sampling methods per MIL-STD-1916 or ASQ H1331 and executing tests defined in QAP I3873 QAP-020. All work must be conducted using calibrated M&TE per RT001, with final deliverables consisting of detailed test reports and certifications of compliance. To be eligible, the contractor must hold ISO/IEC 17025 accreditation and maintain CMMC Level 2 certification for the secure handling of technical data. This opportunity falls under NAICS code 541380 and is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 2 days

AI Contract Overview

This subcontract for Confined Space Entry Permitting and Pre-Entry Evaluation is issued by the Operations and Maintenance agency in Ohio. The primary objective is to manage pre-entry evaluations and the issuance of permits through standardized forms to ensure strict compliance with atmospheric testing, lockout-tagout procedures, and rescue readiness requirements. The opportunity is categorized under NAICS code 541380 and was posted on August 11, 2026. Interested parties must submit their responses by the deadline of August 28, 2026.

General Info

Ohio O&M agency subcontract for confined space entry permitting and pre-entry evaluations.

Agency

Ohio → Operations and Maintenance

NAICS

541380 - Testing Laboratories and Services

Place of Performance

OH, USA

Set-Aside

NONE

Documents

This scope was carved out of RFQ-88024.

The full solicitation package (11 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

2026-2027 Liquid Emulsion Polymer Solution at the Southerly and Westerly Wastewater Treatment Centers

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 11

subcontract

Response DeadlineAug 28

Deadline has passed

Submission Closed

08/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyOhio → Operations and Maintenance

ContactsNo contacts available

OfficeN/A

Organization / AgencyOhio → Operations and Maintenance

Office AddressN/A

ContactsNo contact information available

Full Description

Manage pre-entry evaluations and issue permits using standardized forms, ensuring compliance with atmospheric testing, LOTO, and rescue readiness requirements.