Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Quality Inspection and Sampling

Active

Federal

Response Deadline10/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Third-Party Quality Inspection and Sampling supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform independent sampling and inspection for prime contractors specifically for the 4820-01-223-8097 valve. Work involves executing sampling plans according to MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes using zero-based sampling plans, precision measurement, and pressure testing equipment. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in Jacksonville, Florida. The contractor is responsible for delivering comprehensive inspection reports and certifications of conformance. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M4-27-Q-0060.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE, REGULATING, FLUID

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineOct 22

Submission deadline

Response Deadline

10/22/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent sampling and inspection for prime contractors on DLA Weapons Support Fluid Handling Division projects. Executes sampling plans per MIL-STD-1916 or ASQ H1331 for the 4820-01-223-8097 valve, verifying Critical, Major, and Minor attributes using zero-based sampling plans. Utilizes precision measurement and pressure testing equipment. Delivers inspection reports and certifications of conformance.

Similar Contracts

Same NAICS industry code

Aerospace NDT and Heat TreatmentThis subcontract for the Defense Logistics Agency involves providing specialized material validation, heat treatment, and non-destructive testing services for aircraft trainer pod projects. The scope of work focuses on ensuring structural integrity through critical processes including X-ray and penetrant inspections, with a requirement for the delivery of certified test reports and detailed heat-treatment logs. Qualified providers must maintain aerospace testing certifications and strictly adhere to ITAR and EAR compliance standards. The project falls under NAICS code 541380 and is managed through the Department of Defense to support prime contractors in meeting rigorous aerospace safety and quality specifications.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Third-Party Aerospace Quality Testing and CertificationThis subcontract for Third-Party Aerospace Quality Testing and Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent quality testing and verification, utilizing sampling methods per MIL-STD-1916 or ASQ H1331 and executing tests defined in QAP I3873 QAP-020. All work must be conducted using calibrated M&TE per RT001, with final deliverables consisting of detailed test reports and certifications of compliance. To be eligible, the contractor must hold ISO/IEC 17025 accreditation and maintain CMMC Level 2 certification for the secure handling of technical data. This opportunity falls under NAICS code 541380 and is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Third-Party Testing and Certification for Critical Application SeatsThis subcontract involves providing independent testing and validation services for critical application seats supporting the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The scope of work requires the performance of First Article Testing and production lot sampling in strict accordance with MIL-STD-1916 or ASQ H1331 standards. To ensure rigorous safety compliance, the contractor must utilize stress analysis and load testing rigs, ultimately delivering certified inspection certificates and detailed test reports. The opportunity is categorized under NAICS code 541380 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of October 23, 2026. This effort focuses on ensuring that critical components meet all necessary safety and performance specifications through third-party certification.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities, under NAICS code 541380. Bidders must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification, proof of insurance, and three professional references by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and incorporates various FAR clauses regarding small business utilization, equal opportunity, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 7 hours ago

DEADLINE

SCDOT Certified Level 1 InspectionThis subcontract opportunity is for the provision of independent third-party quality assurance and inspection services for prime contractors working on Beaufort County Engineering road projects. The selected provider will be responsible for monitoring asphalt placement, verifying temperatures, and managing load tickets in strict accordance with SCDOT procedures. To ensure compliance and technical accuracy, the contractor must employ an SCDOT Certified Level 1 Inspector who will deliver weekly inspection reports and certified quality documentation. The solicitation was posted on October 16, 2026, with a response deadline of November 17, 2026. Falling under NAICS code 541380, this project is managed by the Engineering department of South Carolina. Interested parties can find further details and submission guidelines through the official procurement portal.

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Geotechnical Vibration MonitoringThis subcontract for Geotechnical Vibration Monitoring involves providing specialized monitoring services for prime contractors working on roadway projects within the City of New Smyrna Beach. The primary objective is to monitor existing structures during the construction process to maintain stability and ensure strict compliance with established geotechnical standards. The selected provider will be responsible for delivering detailed vibration monitoring reports to document these findings. The opportunity is categorized under NAICS code 541380 and is managed by the Purchasing agency for the state of Florida. Interested parties should note that the solicitation was posted on October 16, 2026, with a response deadline set for January 13, 2027.

POSTED

about 11 hours ago

DEADLINE

Acceptance Testing and Certification for Electric StartersThis subcontract involves providing final acceptance testing and quality certification for electric engine starters supporting Navsup Weapon Systems Support projects. The selected contractor will be responsible for conducting functional testing using Special Test Equipment in accordance with approved overhaul manuals to verify operational reliability and generate necessary acceptance test data. The project requires the use of certified quality assurance personnel and strict adherence to calibration standards. Key deliverables include the submission of certified Acceptance Test Reports and RFI certifications. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Sensor & Hardware Testing (Lab and Field)This subcontract involves providing comprehensive laboratory and field testing for weather sensors and data acquisition hardware in support of prime contractors for the NASA Shared Services Center. The scope of work includes executing tests for sensors and peripherals, supporting the verification and validation of integrated hardware and firmware, and providing fabrication support that meets specific quality certifications. The project is based in Orlando, Florida, and requires the delivery of detailed test reports and formal verification and validation certification documentation. Interested parties should note the solicitation timeline, with a response deadline set for October 20, 2026.

NASA Shared Services Center

POSTED

about 11 hours ago

DEADLINE

Avionics Testing and Quality Assurance ServicesThe Avionics Testing and Quality Assurance Services subcontract involves providing independent inspection, environmental testing, and qualification testing for prime contractors supporting Department of the Air Force KC-46 aircraft projects. The scope of work includes conducting functional testing, environmental stress screening, and vibration and thermal testing utilizing spectrum analyzers and environmental chambers. To ensure compliance, the provider must maintain accreditation according to MQR-PSD-1 guidelines and Source Approval Request standards. The final deliverables for this engagement consist of comprehensive test reports and necessary certification documentation. This opportunity is managed through the Department of Defense via the Ok DLA Aviation office in Oklahoma City.

Ok DLA Aviation At Oklahoma City

POSTED

about 11 hours ago

DEADLINE

Non-Destructive Testing (NDT) for Special Emphasis Fasteners

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

Concrete Scanning and Non-Destructive Testing ServicesThis subcontract opportunity is for Concrete Scanning and Non-Destructive Testing Services to support prime contractors on Department of Veterans Affairs facility projects. The selected provider will perform non-destructive evaluations of concrete roof decks, utilizing systematic hammer testing to detect hollow or delaminated areas. Additionally, the contractor will use Ground Penetrating Radar and electromagnetic cover meters to map reinforcement spacing and depth, delivering comprehensive scanning data and delamination reports. The contract is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 541380 and is managed by the Department of Veterans Affairs Network Contract Office 15. Qualified candidates must hold ASNT NDT Certification to perform the required technical services. The response deadline for this opportunity is October 28, 2026.

255-NETWORK Contract Office 15 (36C255)

POSTED

about 11 hours ago

DEADLINE

Ballistic Certification and Product Compliance Testing (PCT)This small business set-aside subcontract for DLA Weapons Support involves providing independent laboratory testing and certification services for prime contractors. The scope of work focuses on executing Contractor First Article Testing and both ballistic and non-ballistic Product Compliance Testing. These operations utilize specialized ballistic ranges and material analysis equipment to ensure all materials are validated against NIST and EJCP requirements. The selected provider is responsible for delivering comprehensive certified test reports and CFAT validation documentation. This effort falls under NAICS code 541380 and is managed by the Department of Defense. The solicitation period extends from October 2026 through October 2027.

DLA Weapons Support

POSTED

about 11 hours ago

DEADLINE

in about 1 year

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Precision Machining and Fabrication of Valve ComponentsThis subcontract involves the precision machining and fabrication of internal valve components for the DLA Weapons Support Fluid Handling Division. The scope of work focuses on utilizing CNC mills and lathes to produce machined valve bodies and sub-assemblies for the 4820-01-223-8097 regulating valve, adhering to strict tolerances. To ensure quality standards, the performing contractor must maintain an AS9100 or ISO 9001 quality management system. The project is designated as a Total Small Business Set-Aside under NAICS code 332710 and is managed by the Department of Defense. Performance of the contract will take place in Jacksonville, Florida. Interested parties must respond by October 22, 2026.

POSTED

about 6 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valves (P/N 4820-01-223-8097)This subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, requires the supply of 150 Fluid Pressure Regulating Valves, specifically Part Number 4820-01-223-8097. These units must meet Critical Application Item standards and adhere to strict packaging and marking requirements per MIL-STD-2073-1E and MIL-STD-129. The final deliverables must be completed, warranted valves delivered to Jacksonville. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332912. Compliance with DFARS Buy American regulations and NIST SP 800-171 cybersecurity standards is mandatory. Interested parties must submit their responses by October 22, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7M4-27-Q-0060

Solicitation SPE7M4-27-Q-0060 is a total small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of 150 fluid pressure regulating valves, part number 4820-01-223-8097. This firm fixed price contract requires delivery to DLA Distribution Jacksonville within 728 days after order. The procurement is conducted under Special Emergency Procurement Authority, meaning the award may occur prior to the solicitation return date. All quotes must be submitted via the DIBBS portal. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging data, and RP001 for palletization. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331, with a price penalty of 2,500 applied to offers proposing origin inspection. Technical and quality requirements are governed by the DLA Master List, and the contractor must comply with NIST SP 800-171 cybersecurity standards and DFARS Buy American regulations. Invoicing and payment are processed electronically through the Wide Area WorkFlow system.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Specialized Military Packaging and MarkingThis subcontract for the Department of Defense DLA Weapons Support Fluid Handling Division involves providing specialized military-grade packaging, preservation, and marking services for prime contractors. The work must be performed in Tracy, California, and requires strict adherence to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking. Technical requirements include the implementation of preservation method 10 and cleaning and drying method 1, with a strict prohibition on the use of mercury or ozone-depleting chemicals. The selected provider is responsible for delivering finished shipments that are fully packaged, marked, and ready for FOB Origin transport. This opportunity was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 488510.

Freight Transportation Arrangement

POSTED

DEADLINE

Precision Tube Tee ManufacturingThis subcontract involves the manufacture and supply of 317 packages of precision Tube Tees, identified by NSN 4730-00-287-1707, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. Production must strictly adhere to TDP Rev A Gen 2, SAE J512 Revision 11/01/2025, and Reference Drawing 18876 9026856. The use of additive manufacturing is explicitly prohibited, and all deliverables must comply with the Buy American Act and the Berry Amendment. The project falls under NAICS code 332999 and is managed by the Department of Defense. Performance of the contract will take place in Tracy, California. Interested parties should note the response deadline of October 26, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Air Duct Hose (NSN 4720-01-306-6828)This subcontract involves the manufacture or procurement of a specialized air duct hose, identified by NSN 4720-01-306-6828, for the DLA Weapons Support Fluid Handling Division. The designated item is intended for delivery to the USS Gridley DDG 101 and must strictly adhere to the DLA Master List of Technical and Quality Requirements. All products must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. To be eligible for this contract, the provider must maintain ISO 9001:2015, CMMC Level 2, and JCP certifications. The project falls under NAICS code 332912 and is managed by the Department of Defense. Interested parties must respond by October 30, 2026, for performance located at FPO 96666.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

MIL-SPEC Aerospace Packaging and MarkingThis subcontract for MIL-SPEC Aerospace Packaging and Marking supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing specialized packaging and marking services for critical aviation components and tube assemblies intended for prime contractors. All work must strictly adhere to ASTM D3951 and RP001 packaging standards, with marking and labeling performed according to MIL-STD-129 to ensure all items are shipment-ready for the DLA Distribution Depot Oklahoma. A primary technical requirement of the contract is the preservation of the oxygen-clean status of all assemblies during the packaging process. Performance will take place at Tinker AFB, Oklahoma. Interested parties must respond by October 26, 2026, regarding this requirement categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

DEADLINE

Oxygen System Cleaning and Inspection ServicesThis subcontract for Oxygen System Cleaning and Inspection Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized cleaning and inspection of metal tube assemblies for prime contractors, ensuring that both interiors and exteriors are free of oils and particulates. All work must be performed in accordance with AF Drawing 8148650 for oxygen service, utilizing certified chemical degreasing systems or ultrasonic cleaners. The scope of work requires the delivery of certified oxygen-clean assemblies accompanied by detailed inspection reports. Performance will take place at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication of precision metal tube assemblies for oxygen life support equipment under the DLA Weapons Support Fluid Handling Division. The selected contractor will be responsible for the cutting, bending, and fitting of tubing in strict accordance with AF Drawing 8148650 to deliver assemblies identified by NSN 4710-00-344-3939. Performance of the work is located at Tinker AFB. To be eligible for this project, contractors must obtain Engineering Source Approval from the government design control activity and maintain CMMC Level 2 compliance. The opportunity is categorized under NAICS code 336413, with a response deadline set for October 26, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Nonmetallic Hose/Tubing Material SupplyThis subcontract opportunity is for the supply of raw nonmetallic tubing and hose materials to support prime contractors working with the DLA Weapons Support Fluid Handling Division. The selected provider must deliver high-grade polymers and elastomers that strictly adhere to the chemical and physical properties specified in drawing NR 78286 SS43. Because these materials are classified as Critical Safety Items, the contractor is required to provide comprehensive material certifications and full supply chain traceability. The project is designated as a Total Small Business Set-Aside under NAICS code 326220 and is managed by the Department of Defense. Performance for this contract will take place in San Diego, California. Interested parties must submit their responses by October 22, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Military-Spec Packaging and Marking for Fluid Handling ComponentsThis subcontract involves providing packaging materials and performing final packing and marking services for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the execution of packaging according to MIL-STD-2073-IE and marking per MIL-STD-129 to ensure a shelf life of 120 months. The project entails the delivery of 112,000 units to be distributed across DLA facilities in Jacksonville and San Diego. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910. Performance will take place in San Diego, California. Interested parties must adhere to the response deadline of October 22, 2026, to be considered for this military-spec requirement.

Packaging and Labeling Services

POSTED

DEADLINE

Nonmetallic Hose Assembly Fabrication (NSN 4720-01-289-6752)This subcontract involves the fabrication and assembly of 112,000 traceable nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The work must be performed in accordance with drawing NR 78286 SS43 Revision 14, as these components are designated as Navy Critical Safety Items. Performance of the contract will take place in San Diego, California. To be eligible, contractors must hold SAE AS9100 certification, CMMC Level 2 compliance, and approval from the US/Canada Joint Certification Program. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 326299. Interested parties must respond by October 22, 2026.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS