Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONN ROD RH HND SD

Active
SPE7M4-26-T-327TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a right-hand connecting rod for a handle-side application, identified by part number 803-6397269 and NSN 2040014549209, with a quantity of 16 units to be delivered FOB origin within 165 days. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, enforcing zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified features are treated as major. The product must be free of ozone-depleting chemicals and must not contain or come into direct contact with mercury or mercury compounds except for specific exempted applications like batteries, instruments, or sensors as defined by NAVSEA; portable mercury-containing devices must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with unit packaging including preservative methods, no cushioning material, and defined container codes, while palletization follows DLA packaging guidelines. Marking is to be standard with no special codes applied, and delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California. The contract requires full and open competition with no set-aside, and pricing is fixed at $16.00 per unit for a total value of $256. The solicitation, issued under contract number SPE7M4-26-T-327T, was posted on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is February 10, 2027, with a need ship date of February 2, 2027.

General Info

16 right-hand connecting rods, part 803-6397269, $16 each, FOB origin, delivery by Feb 10, 2027, strict quality and packaging standards.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-327T Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONN ROD RH HND SD
CONNECTING ROD, RIGHT HAND, HANDLE SIDE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FULL AND OPEN COMPETITION APPLY
DETAILED DRAWING (ONE ITEM)
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 53711 6397269 REVISION NR B DTD 12/20/2007
SPE7M4-26-T-327T
SECTION B
PART PIECE NUMBER: 803-6397269 PC44 ZINC PLATE
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017778009 0001 EA 16.000
NSN/MATERIAL:2040014549209
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
SPE7M4-26-T-327T
SECTION B
PR: 7017778009 PRLI: 0001 CONT’D
Need Ship Date:02/02/2027 Original Required Delivery Date:02/10/2027
SPE7M4-26-T-327T NSN/Part Number: 2040-01-454-9209 Quantity: 16 EA Purchase Request: 7017778009QTY: 16 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, GEN
Solicitation # SPE7L1-26-T-943Q
The contract is for two resilient general mounts identified by NSN 5340-01-501-4392, with a delivery requirement of 20 days after award. It is issued under solicitation number SPE7L1-26-T-943Q, posted on August 9, 2026, with responses due by August 20, 2026. Full and open competition applies, and the NAICS code is 332510 under the Department of Defense’s Land Supply Chain. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Packaging must comply with DLA standards, government identification must be removed from non-accepted supplies, and configuration changes require formal engineering change proposals or variance requests. Export control regulations apply to technical data, making it subject to ITAR or EAR, with access restricted to contractors holding approved US/Canada Joint Certification Program status, having completed required DLA training, and received explicit authorization. The place of performance is Pearl Harbor, Hawaii, with Kristina Derry listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
TURNBUCKLE BODY
Solicitation # SPE7L1-26-T-946C
The contract pertains to the procurement of five turnbuckle bodies with NSN/Part Number 5340-01-517-0385 under solicitation SPE7L1-26-T-946C, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 165 days of award, and the item is subject to stringent cybersecurity compliance requirements including CMMC Level 2 certification for the assessing organization. Technical data associated with this item is classified as export-controlled under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring strict adherence to DFARS 252.225-7048. Access to this controlled data is limited strictly to DLA contractors who hold an approved U.S./Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled technical data, and have received formal approval from DLA to access the information. The contract is open for response until August 20, 2026, with performance to be delivered to New Cumberland, Pennsylvania, 17070-5002, and all inquiries should be directed to Isabelle Szulewski at the designated DLA point of contact.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-T-944G
The contract is for the procurement of 250 mounting plates with NSN 5340-01-623-8342 under solicitation SPE7L1-26-T-944G, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The delivery requirement is set for 165 days after award, and the response deadline for submissions is August 20, 2026, with the solicitation posted on August 9, 2026. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item must comply with MIL-STD-130N for identification marking of U.S. military property, and any government identification must be removed from non-accepted supplies. The NAICS code is 332510, and the place of performance is New Cumberland, Pennsylvania, with the primary point of contact being Michael Nordahl via email and phone provided. This procurement is open to federal suppliers under an unrestricted competition category.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-943F
The contract pertains to the procurement of four CLAMP, LOOP units with NSN 5340-01-091-6833 under solicitation SPE7L1-26-T-943F, with a delivery requirement of five days after award. The technical data associated with this item is subject to stringent export controls under either ITAR or EAR, meaning any disclosure—whether to foreign persons within the United States or abroad—requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this data, and distribution is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 332510. Performance is directed to Chambersburg, Pennsylvania, and all inquiries must be directed to Michael Nordahl at the provided DLA contact information.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, NUT AN
Solicitation # SPE7L4-26-T-6214
This contract specifies the procurement of 10 protective nut caps with NSN 5340-01-695-4518 and part number 4359775 for BAE Systems Land & Armaments L.P. under solicitation SPE7L4-26-T-6214, issued by the Department of Defense through DLA. The items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including MIL-STD-129 marking with no special marking codes. Delivery is required FOB origin within 165 days, with a specified ship date of February 2, 2027, and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging requiring unit containers coded D3, intermediate containers coded E5, and palletization in accordance with DLA requirements. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, and transportation logistics follow DLA procedure notes C19 and C20. The unit price is $10.00 per piece, totaling $100.00, with the purchase request number 7017776237 and unit of issue as each. The contract is managed by Anna-Rachelle Betts of LSO Combat Vehicles and Armament, with contact information provided for inquiries.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1257
The contract pertains to the procurement of a single unit of an infrared viewer with part number CC-3917EK and NSN 8145-01-606-1140, awarded under solicitation SPE8ED-26-T-1257. Delivery is required within twenty days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at Camp Lejeune, North Carolina, and the item must be packaged per ASTM D3951 unless superseded by DLA Master List technical and quality requirements, which take precedence. Packaging and labeling must conform to MIL-STD-129, and palletization follows DLA’s RP001 procurement packaging standards. The item must be shipped via traceable means, explicitly prohibiting parcel post, with delivery directed to the Distribution Management Office at Building 1012, O Street Bay #8. The contractor must comply with all applicable technical and quality specifications referenced by R and I numbers from the DLA Master List, and documentation requirements for source approval and covered defense information are applicable. The contract stipulates that government identification must be removed from non-accepted supplies and data provided is proprietary or insufficient for competitive procurement, restricting full disclosure. The required delivery date is August 5, 2026, with a primary point of contact listed as Ogden Howard at DLA, and all logistics are tied to project TP 3 under the military freight designation M21625.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L4-26-U-1070
The contract pertains to the procurement of 33 CLAMP, LOOP units with NSN 5340-01-284-2451 under solicitation SPE7L4-26-U-1070, with a response deadline of August 24, 2026, and a delivery requirement of 116 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including to foreign national employees or subsidiaries of U.S. companies. Access to this controlled data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA export control training and questionnaire, and have received explicit approval from the DLA controlling authority. The acquiring organization is the Department of Defense through LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact, and the procurement falls under NAICS code 332510 with no set-aside classification.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, SHAFT
Solicitation # SPE7L1-26-T-946R
The contract pertains to the procurement of a COLLAR, SHAFT with NSN 5340017206077, issued under solicitation SPE7L1-26-T-946R by the Department of Defense’s Land Supply Chain. A total of 18 units are required at a unit price of $18.00, with the delivery window set at 165 days and delivery terms designated as FOB origin. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking code applied. The product is classified as a critical application item, and no ozone-depleting chemicals may be used under any circumstance, overriding any conflicting specification provisions unless authorized substitutes receive prior approval. Packaging must adhere to DLA’s packaging requirements and palletization guidelines, with the consignment destined for the DLA Distribution facility at New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, and quantity variance is strictly zero percent. The item is sourced exclusively from Vega Americas Inc under part numbers 2.44484 and KMB0556-180, and procurement must align with the designated DoD unit of issue. The original required delivery date is April 27, 2027, with a need ship date of February 2, 2027, and the contract was issued with a solicitation response deadline of August 20, 2026.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7LX-26-U-9350
The contract is for the procurement of 29 units of webbing strap identified by NSN 5340-00-868-9610 under solicitation SPE7LX-26-U-9350, with a response deadline of August 24, 2026, and a delivery requirement of 115 days after award. The item falls under NAICS code 332510 and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. All supplies must comply with DLA packaging standards, and government identification must be removed from non-accepted items. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. This procurement is subject to full and open competition, and the technical data associated with the item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons without authorization. Access to such data is limited to contractors with approved U.S./Canada Joint Certification Program status, having completed mandatory DLA export control training and questionnaire, and received formal approval from DLA. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-14LH
The contract pertains to the procurement of 395 straight headless pins identified by NSN 5315-01-269-9299 under solicitation SPE4A6-26-T-14LH, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 155 days after award, and responses must be submitted by August 17, 2026. The item falls under NAICS code 332510 and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Cybersecurity compliance is mandated through CMMC Level 2 certification for third-party assessors, and packaging must adhere to DLA standards. Inspection and acceptance occur at the origin, and non-accepted supplies must have all government identification removed. Physical marking of the bare items is required, and export control regulations under ITAR or EAR apply to associated technical data, restricting access to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. The contract enforces tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, with additional provisions for the safeguarding of covered defense information. Technical data governing the item cannot be disclosed to foreign persons, including employees of U.S. companies or subsidiaries, without prior authorization from the Department of State or Commerce, in accordance with DFARS 252.225-7048. Access to controlled data is limited to contractors who have successfully completed the DLA Export-Controlled Technical Data Questionnaire and training via the designated DLA website. The place of performance is Tinker Air Force Base, Oklahoma, with Summer Allen as the primary point of contact for inquiries. The procurement is classified as federal and does not specify a set-aside type, and all documentation must be submitted via the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 336412
New
DIBBS
SEAL, ENGINE STARTER
Solicitation # SPE7M4-26-T-326Z
This contract pertains to the procurement of 58 units of a SEAL, ENGINE STARTER with NSN 2995-00-939-8495, supplied by EATON AEROSPACE, LLC under part number 608593. The item is designated as a critical application and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Quality conformance is governed by TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS and QUALITY CONFORMANCE INSPECTION REQUIREMENTS, with inspection sampling mandates following MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. The contract enforces CMMC Level 2 cybersecurity requirements and mandates strict adherence to MIL-STD-129 for labeling and packaging, with palletization compliant with DLA packaging standards. Delivery is FOB origin with a 47-day lead time, and inspection and acceptance occur at the destination. The unit of issue is each (EA), priced at $58.00 per unit, with no variance allowed in quantity. All packaging must be marked and stored per specified protocols, and the items must be delivered to DLA Distribution Cherry Point in North Carolina by the required delivery date of February 19, 2027.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-327X
This contract pertains to the procurement of an O-RING with NSN 5331-00-194-1670, quantity of 1,283 units, under solicitation SPE7M4-26-T-327X, with a required delivery date of February 13, 2027, and a delivery window of 118 days. The item is classified as a critical application product with a non-extendable shelf life of 180 months and is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be pre-approved by the Performance Review Institute at the time of award. Technical and quality specifications are governed by referenced standards including SAE AS3209C and AMS7276J, and all sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for specific exceptions like batteries or sensors explicitly authorized by NAVSEA, and portable devices containing mercury must have shock-proof design with secondary containment. Asbestos is completely banned per FED-STD-313. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling requiring the code 32 to indicate Type I shelf-life status. The product must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. All packaging and shipping must follow DLA Packaging Requirements and IP025 for hazardous materials, with no mercury permitted in any packaging materials. The item is to be delivered FOB origin to the designated receiving facility in Texarkana, TX, with a 0% variance allowed on quantity. Transportation and freight procedures are governed by DLAD PROC NOTES C19 and C20. The contract is governed by DLA’s master list of technical and quality requirements, with compliance controls tied to the solicitation issue date. The sole point of contact is Freddie Vazquez, with the purchase request number 7017437682 and unit price of $1,283.00 for the total contract value.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
TORQUE TOOL, SEA
Solicitation # SPE7M4-26-T-326C
The contract pertains to the procurement of two torque tools, identified by NSN 4921-01-605-4834, under solicitation SPE7M4-26-T-326C, issued by the Fluid Handling Division of the Department of Defense. Delivery is required within 20 days after award, with performance to occur in Keyport, Washington, 98345-7610. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) to meet the cybersecurity requirements. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and questionnaire, and have received explicit approval from the Defense Logistics Agency. The North American Industry Classification System code is 332994, and the primary point of contact is Rory O’Reilly at DLA.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, TUBE REPAIR
Solicitation # SPE7M4-26-T-327H
The contract specifies the procurement of 2,182 units of a laminated phenolic tube repair plug with a nominal size of 3/8 inch, all of which must comply with the salient characteristics and sections 3.4 through 3.7 of specification A-A-59949. Each unit must meet rigorous quality standards, and the supplier is required to provide a Certificate of Quality Compliance for every manufacturing lot, with each certificate prepared in accordance with the Supplemental Quality Assurance Provision. For deliveries subject to government inspection at source, the certificate must be available for review by the government representative upon material presentation, and compliance with COQC requirements enables the government to sign off on the WAWF receiving report provided the documentation is properly uploaded as an attachment to the Production CLIN in iRAPT. An electronic copy of each COQC must be submitted via the Attachment tab of the Receiving Report in the iRAPT system for government record retention. The item is identified by NSN 4730-00-289-0593 under solicitation SPE7M4-26-T-327H, issued by the Fluid Handling Division of the Department of Defense, with a delivery deadline of 165 days after award. The purchase request number is 7017775437, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. All data required by the contract, including packaging and certification documentation, is to be included in the quoted price. The primary point of contact is Blake Tushar, reachable via email and phone, and the solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The NAICS code for this procurement is 332996, indicating it falls under other miscellaneous fabricated metal product manufacturing.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, TUBE FITTING
Solicitation # SPE7M4-26-T-327W
This contract specifies the procurement of a locknut for tube fittings made from corrosion-resistant steel (CRES) with passivation, sized for 0.312-inch nominal tubing, in compliance with SAE Aerospace standards AS4841 and AS5179D. The item is classified as a critical application component and must be sourced exclusively from manufacturers or assemblers listed on the Performance Review Institute’s Qualified Manufacturer List (QML) or Qualified Products List (QPL). All production and assembly must adhere to strict accreditation requirements, and material must not contain mercury or mercury compounds except under specific, limited exemptions for functional devices like sensors, batteries, or instruments. Ozone-depleting chemicals are strictly prohibited. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA’s packaging requirements. The NSN 4730007345774 is procured in two separate line items totaling 1,140 units, with delivery required within 18 days FOB origin. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. Delivery is split between two DLA depots—Tinker AFB and Robins AFB—with specific shipping addresses and required ship dates of September 8, 2026, and May 13, 2027, respectively. The solicitation number is SPE7M4-26-T-327W, and compliance with all referenced technical and quality requirements from the DLA Master List is mandatory.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
COUPLING, TUBE
Solicitation # SPE7M3-26-T-8151
The contract is for the procurement of a coupling tube, part number DPL4514T10, manufactured by Designed Metal Connections Inc, identified by NSN 4730016464133, with a total quantity of six units. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must follow MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization adhering to RP001, and all items must be marked and labeled accordingly. The product is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information. Delivery must be made FOB origin within 44 days of contract award, with inspection and acceptance occurring at the destination. The sole delivery address is DLA Distribution Cherry Point in North Carolina, and the unit of issue is each (EA), with a total contract value of $36.00. The solicitation, issued under contract number SPE7M3-26-T-8151, was posted on August 9, 2026, with a response deadline of August 20, 2026, and the original required delivery date is January 30, 2027. Point of contact is William Cain, with available support details provided.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-26-T-8116
The contract is for 63 units of a 70-30 copper-nickel elbow pipe with a 45-degree flow angle and 2-inch nominal pipe size featuring socket-weld ends, identified by NSN 4730-01-436-0893. The item is procured under solicitation SPE7M3-26-T-8116 with a firm delivery deadline of 144 days after order, and the procurement is managed by the Department of Defense’s Fluid Handling Division. The supplier must comply with DLA packaging requirements, ensuring all documentation and materials meet specified standards. Each shipment must be accompanied by a Certificate of Quality Compliance (COQC), with one copy provided per manufacturing lot if multiple lots are involved, and each certificate must adhere to the Supplemental Quality Assurance Provision. The supplier is required to make the COQC available to Government inspectors at the source for review during material acceptance and must upload electronic copies of all certificates to the iRAPT system via the Receiving Report’s Attachment tab for official records. Government representatives may finalize acceptance via WAWF only after verifying proper COQC compliance and proper documentation upload. The contract was posted with a response deadline of August 20, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with Judy Mojica listed as the primary point of contact for inquiries and coordination.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
SEAL, CONICAL, FLARED
Solicitation # SPE7M3-26-T-8148
The contract pertains to the procurement of 50 units of a conical flared seal, identified by NSN 4730-01-610-3433 and part number AS4824N02, manufactured in compliance with SAE AS4824B Revision B dated November 1, 2007. Delivery is required within 20 days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and methods defined, including intermediate container details and palletization per DLA requirements. The item is subject to strict prohibition of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for attributes are designated as VII, IV, and II for critical, major, and minor characteristics respectively. The contractor must comply with CMMC Level 2 self-assessment requirements and manage configuration changes through formal engineering change proposals. A certificate of conformance is authorized unless overridden by a quality assurance letter. The delivery address and marking instructions are specified for Hoogerheide, Netherlands, with freight handled by DNEM00. The contract is issued under full and open competition, and all technical and quality requirements referenced are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-327A
This contract pertains to the procurement of a nonmetallic hose assembly designated by NSN 4720-01-371-1331 and part numbers AAEA0600, FA2406EGG0633AA, and 23511467, to be supplied by Rolls-Royce Solutions America Inc and Danfoss Power Solutions II LLC. The delivery requirement is for 71 units, with a strict quantity variance of plus or minus zero percent, and delivery must be completed within 165 days from the contract date, FOB origin. Inspection and acceptance are to occur at the destination, and the items must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 without any special marking codes. The packaging and palletization must comply with DLA’s packaging requirements, using specified methods for preservation, wrapping, and unit containment as outlined in the contract’s packaging data. The contract is issued under solicitation SPE7M4-26-T-327A with a response deadline of August 20, 2026, and a posted date of August 9, 2026. The end delivery date is set for February 2, 2027, replacing the original required delivery date of January 7, 2027. The delivery destination is DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston, AL 36201-4199, with transportation instructions governed by DLAD Proc Note C19 for general shipping and C20 for first destination handling. The unit of issue is each, priced at $71.00 per unit, totaling $5,041. The contract references technical and quality requirements from the DLA Master List, which apply based on solicitation and award timelines. The point of contact is Blake Tushar, and the NAICS code is 332999 for other miscellaneous fabricated metal product manufacturing.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, ENGINE FU
Solicitation # SPE7M4-26-T-327L
This contract is for the procurement of a Parts Kit, Engine Fuel, identified by NSN 2910-00-355-7669 and part number 5199734, with a quantity of 190 units. The item is classified as a critical application item and must be supplied by either Rolls-Royce Solutions America Inc or Federal-Mogul Corporation DBA, as specified. The contract mandates strict compliance with DLA packaging and preservation standards per MIL-STD-2073-1E, Appendix D, for kits, and requires marking consistent with MIL-STD-129 without special marking codes. Packaging must adhere to DLA’s procurement requirements including palletization guidelines, and all items must be delivered FOB origin with zero variance allowed in quantity. The delivery schedule allows 191 days from the contract award, with a required ship date of February 28, 2027, and an original delivery deadline of April 6, 2027. The destination for delivery is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation protocols follow DLA procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and requires compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Suppliers must address potential casting or forging needs by submitting a request to DLA if special tooling is required. The procurement is conducted under a total small business set-aside, with the solicitation number SPE7M4-26-T-327L, and the unit of issue is each (EA). The unit price is $190.00, resulting in a total contract value of $36,100. Inspections and acceptance occur at the destination, and the contracting office is the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact. All documentation and compliance obligations must align with the latest applicable versions of referenced standards in effect as of the solicitation or award date.
Other Engine Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
RESTRICTOR UNIT, FLU
Solicitation # SPE7M3-26-T-8147
The contract is for a single Restrictor Unit, Fluid Flow, with NSN/Part Number 4730-01-535-6415, under solicitation SPE7M3-26-T-8147, issued as a Total Small Business Set-Aside under NAICS code 333998. The item is subject to strict export control regulations under ITAR or EAR, prohibiting any disclosure or transfer of technical data to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is required, and only DLA contractors with approved U.S./Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and authorized access may receive the technical information. The contract mandates adherence to DLA packaging standards, removal of government identification from non-accepted supplies, and incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date. The supplier must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified as a third-party assessment organization and must deliver the item within 165 days of award to New Cumberland, Pennsylvania, with William Cain designated as the primary point of contact.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, CLAMP, PIPE
Solicitation # SPE7M3-26-T-8134
The contract is for the procurement of 824 units of a 3-inch flexible coupling with a galvanized finish and Nitrile Grade T gasket, identified by part number L030075GT0 and NSN 4730-01-514-5018, manufactured by Victaulic Company of America Inc. All supplies must comply with DLA Packaging Requirements and be packaged in accordance with MIL-STD-2073-1E, using specific preservative methods and marking standards aligned with MIL-STD-129, with no special marking required. The unit of issue is each, with a fixed quantity and zero variance allowed, and delivery is required FOB origin within 67 days from the contract award. Inspection and acceptance occur at the destination, which is DLA Distribution Red River, Building 499 in Texarkana, Texas. The contract is a total small business set-aside under NAICS code 332996, issued by the Department of Defense’s Fluid Handling Division, and is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The solicitation was issued on August 9, 2026, with responses due by August 20, 2026, and the original delivery date is February 1, 2027. Contact for inquiries is William Cain, with the provided email and phone number.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details