Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INSERT, SCREW THREAD

Active
SPE7M2-26-T-6176Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 2,174 units of INSERT, SCREW THREAD under solicitation SPE7M2-26-T-6176, with a delivery deadline of 158 days after contract award. The item is classified as a commercial item and must comply with the current revision of the applicable military or consensus non-government part standard, with past revisions accepted only for previously manufactured hardware. All hardware produced after the solicitation date must adhere strictly to the latest version of the standard. Compliance with MIL-STD-130N for identification marking of U.S. military property is required, and all supplies must be marked accordingly. The contract incorporates technical and quality requirements from the DLA Master List, and packaging must meet DLA specifications. Zero-based sampling per MIL-STD-1916 or ASQ H1331 is mandated, with critical, major, and minor attributes assigned specific verification levels or AQLs unless otherwise stated; unspecified attributes are treated as major. No intentional addition of mercury or mercury-containing compounds is permitted unless for specific exempted uses such as batteries, fluorescent lamps, or specialized instrumentation, and where used, those items must include a secondary containment to prevent leakage. Configuration change management, variance requests, and covered defense information rules are in effect, and all government identification must be removed from non-accepted supplies. The solicitation is fully competitive under a federal specification and managed by the Department of Defense’s Nuclear Reactor Program, with technical inquiries directed to David Larsen at DLA.

General Info

Procure 2,174 screw threads, deliver in 158 days, comply with MIL-STD-130N, zero-based sampling, no mercury except exempt uses.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-6176 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSERT,SCREW THREAD
INSERT,SCREW THREAD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
SPE7M2-26-T-6176
SECTION B
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE NSN/Part Number: 5325-00-331-4774 Quantity: 2,174 EA Purchase Request: 7017685035QTY: 2174 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Shipping and Storage Container SupplyThe contract calls for the procurement and delivery of a single metal shipping and storage container compliant with MIL-STD specifications, ensuring durability and standardization for military-grade use. The scope includes all necessary packaging, marking, and labeling in accordance with federal and defense requirements, with delivery terms set at FOB origin, meaning the supplier is responsible for all costs and risks until the container is loaded at the origin point. The container must meet rigorous military standards for transportation and long-term storage environments. The solicitation is issued under NAICS code 332510, indicating it pertains to metal container manufacturing, and is classified as a subcontract within the Department of Defense’s Construction & Equipment MRO SVC I program. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The opportunity was posted on August 9, 2026, and bids must be submitted by August 20, 2026, providing a twelve-day window for interested parties to respond. The full solicitation details can be accessed via the provided DIBBS link.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, GEN
Solicitation # SPE7L1-26-T-943Q
The contract is for two resilient general mounts identified by NSN 5340-01-501-4392, with a delivery requirement of 20 days after award. It is issued under solicitation number SPE7L1-26-T-943Q, posted on August 9, 2026, with responses due by August 20, 2026. Full and open competition applies, and the NAICS code is 332510 under the Department of Defense’s Land Supply Chain. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Packaging must comply with DLA standards, government identification must be removed from non-accepted supplies, and configuration changes require formal engineering change proposals or variance requests. Export control regulations apply to technical data, making it subject to ITAR or EAR, with access restricted to contractors holding approved US/Canada Joint Certification Program status, having completed required DLA training, and received explicit authorization. The place of performance is Pearl Harbor, Hawaii, with Kristina Derry listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
TURNBUCKLE BODY
Solicitation # SPE7L1-26-T-946C
The contract pertains to the procurement of five turnbuckle bodies with NSN/Part Number 5340-01-517-0385 under solicitation SPE7L1-26-T-946C, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 165 days of award, and the item is subject to stringent cybersecurity compliance requirements including CMMC Level 2 certification for the assessing organization. Technical data associated with this item is classified as export-controlled under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring strict adherence to DFARS 252.225-7048. Access to this controlled data is limited strictly to DLA contractors who hold an approved U.S./Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled technical data, and have received formal approval from DLA to access the information. The contract is open for response until August 20, 2026, with performance to be delivered to New Cumberland, Pennsylvania, 17070-5002, and all inquiries should be directed to Isabelle Szulewski at the designated DLA point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-T-944G
The contract is for the procurement of 250 mounting plates with NSN 5340-01-623-8342 under solicitation SPE7L1-26-T-944G, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The delivery requirement is set for 165 days after award, and the response deadline for submissions is August 20, 2026, with the solicitation posted on August 9, 2026. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item must comply with MIL-STD-130N for identification marking of U.S. military property, and any government identification must be removed from non-accepted supplies. The NAICS code is 332510, and the place of performance is New Cumberland, Pennsylvania, with the primary point of contact being Michael Nordahl via email and phone provided. This procurement is open to federal suppliers under an unrestricted competition category.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CONN ROD RH HND SD
Solicitation # SPE7M4-26-T-327T
The contract pertains to the procurement of a right-hand connecting rod for a handle-side application, identified by part number 803-6397269 and NSN 2040014549209, with a quantity of 16 units to be delivered FOB origin within 165 days. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, enforcing zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified features are treated as major. The product must be free of ozone-depleting chemicals and must not contain or come into direct contact with mercury or mercury compounds except for specific exempted applications like batteries, instruments, or sensors as defined by NAVSEA; portable mercury-containing devices must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with unit packaging including preservative methods, no cushioning material, and defined container codes, while palletization follows DLA packaging guidelines. Marking is to be standard with no special codes applied, and delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California. The contract requires full and open competition with no set-aside, and pricing is fixed at $16.00 per unit for a total value of $256. The solicitation, issued under contract number SPE7M4-26-T-327T, was posted on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is February 10, 2027, with a need ship date of February 2, 2027.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-943F
The contract pertains to the procurement of four CLAMP, LOOP units with NSN 5340-01-091-6833 under solicitation SPE7L1-26-T-943F, with a delivery requirement of five days after award. The technical data associated with this item is subject to stringent export controls under either ITAR or EAR, meaning any disclosure—whether to foreign persons within the United States or abroad—requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this data, and distribution is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 332510. Performance is directed to Chambersburg, Pennsylvania, and all inquiries must be directed to Michael Nordahl at the provided DLA contact information.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, NUT AN
Solicitation # SPE7L4-26-T-6214
This contract specifies the procurement of 10 protective nut caps with NSN 5340-01-695-4518 and part number 4359775 for BAE Systems Land & Armaments L.P. under solicitation SPE7L4-26-T-6214, issued by the Department of Defense through DLA. The items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including MIL-STD-129 marking with no special marking codes. Delivery is required FOB origin within 165 days, with a specified ship date of February 2, 2027, and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging requiring unit containers coded D3, intermediate containers coded E5, and palletization in accordance with DLA requirements. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, and transportation logistics follow DLA procedure notes C19 and C20. The unit price is $10.00 per piece, totaling $100.00, with the purchase request number 7017776237 and unit of issue as each. The contract is managed by Anna-Rachelle Betts of LSO Combat Vehicles and Armament, with contact information provided for inquiries.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1257
The contract pertains to the procurement of a single unit of an infrared viewer with part number CC-3917EK and NSN 8145-01-606-1140, awarded under solicitation SPE8ED-26-T-1257. Delivery is required within twenty days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at Camp Lejeune, North Carolina, and the item must be packaged per ASTM D3951 unless superseded by DLA Master List technical and quality requirements, which take precedence. Packaging and labeling must conform to MIL-STD-129, and palletization follows DLA’s RP001 procurement packaging standards. The item must be shipped via traceable means, explicitly prohibiting parcel post, with delivery directed to the Distribution Management Office at Building 1012, O Street Bay #8. The contractor must comply with all applicable technical and quality specifications referenced by R and I numbers from the DLA Master List, and documentation requirements for source approval and covered defense information are applicable. The contract stipulates that government identification must be removed from non-accepted supplies and data provided is proprietary or insufficient for competitive procurement, restricting full disclosure. The required delivery date is August 5, 2026, with a primary point of contact listed as Ogden Howard at DLA, and all logistics are tied to project TP 3 under the military freight designation M21625.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L4-26-U-1070
The contract pertains to the procurement of 33 CLAMP, LOOP units with NSN 5340-01-284-2451 under solicitation SPE7L4-26-U-1070, with a response deadline of August 24, 2026, and a delivery requirement of 116 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including to foreign national employees or subsidiaries of U.S. companies. Access to this controlled data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA export control training and questionnaire, and have received explicit approval from the DLA controlling authority. The acquiring organization is the Department of Defense through LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact, and the procurement falls under NAICS code 332510 with no set-aside classification.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, SHAFT
Solicitation # SPE7L1-26-T-946R
The contract pertains to the procurement of a COLLAR, SHAFT with NSN 5340017206077, issued under solicitation SPE7L1-26-T-946R by the Department of Defense’s Land Supply Chain. A total of 18 units are required at a unit price of $18.00, with the delivery window set at 165 days and delivery terms designated as FOB origin. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking code applied. The product is classified as a critical application item, and no ozone-depleting chemicals may be used under any circumstance, overriding any conflicting specification provisions unless authorized substitutes receive prior approval. Packaging must adhere to DLA’s packaging requirements and palletization guidelines, with the consignment destined for the DLA Distribution facility at New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, and quantity variance is strictly zero percent. The item is sourced exclusively from Vega Americas Inc under part numbers 2.44484 and KMB0556-180, and procurement must align with the designated DoD unit of issue. The original required delivery date is April 27, 2027, with a need ship date of February 2, 2027, and the contract was issued with a solicitation response deadline of August 20, 2026.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-T-6183
This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-082-0297, with a total quantity of 7,597 units to be delivered FOB origin within 220 days of contract award. The item is classified as a critical application item and designated as a commercial product of a type, subject to the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, specifically governed by SAE AS39029 Revision E dated May 1, 2023. Packaging and labeling must comply with MIL-STD-2073-1E and MIL-STD-129, requiring each unit to be marked with the current and most recently superseded part numbers; however, an exception is permitted where only the current required part number must appear on the label. The product is exempt from intentional mercury content except where used in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Delivery is directed to DLA Distribution at the New Cumberland, Pennsylvania facility, with inspection and acceptance occurring at the destination. The contract enforces a zero percent quantity variance and requires adherence to hazardous materials shipping protocols under IP025. The unit of issue is each (EA), with a total price of $7,597.00, and all documentation and compliance are tied to the referenced DLA procurement procedures and technical directives.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE7M2-26-T-6182
The contract specifies the procurement of 24 socket head cap screws identified by NSN 5305-01-426-4612 and part number NAS1352C03LE6, conforming to the non-government standard NAS1352 Rev 13 dated 05/31/2016. The item is classified as a commercial item and is designated as a critical application component, requiring strict adherence to dimensional and quality controls per SPE7M2-26-T-6182 Section B and MIL-STD-130N for marking, excluding self-locking nuts and threads below specified sizes. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or an approved zero-based plan, with zero non-conformances required unless otherwise stated, and verification levels assigned per critical, major, and minor attributes. Mercury and mercury-containing compounds are strictly prohibited in the hardware and all packaging processes, except for specified functional uses in batteries, instruments, or defense systems as authorized by NAVSEA, with portable fluorescent lamps requiring secondary containment. Packaging must comply with MIL-STD-2073-1E, including preservation method 10 and packaging code U, and marking per MIL-STD-129 with no special markings required. Palletization follows DLA packaging requirements, and delivery is FOB origin with a 158-day lead time, to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, with no variance allowed in quantity, and the contract is tied to solicitation SPE7M2-26-T-6182, with a required ship date of January 26, 2027.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, TAPERED, PLAIN
Solicitation # SPE7M2-26-T-6173
The item is a tapered plain pin with NSN 5315-01-723-0297, ordered in a quantity of three units under purchase request 7017777811, with delivery required within 165 days after award. The solicitation number is SPE7M2-26-T-6173, posted on August 9, 2026, with responses due by August 20, 2026, and is issued by the Department of Defense’s Nuclear Reactor Program. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. The technical data associated with this item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including within the United States, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA export control training and questionnaires, and have received formal approval from DLA. Configuration changes must follow formal engineering change proposal procedures, and any deviations or waivers require formal variance requests. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is David Larsen at david.larsen@dla.mil.
Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-T-6164
This contract specifies the procurement of terminal lugs identified by NSN 5940-01-054-6295 under solicitation SPE7M2-26-T-6164, with a total quantity of 4,846 packages, each containing 100 units, resulting in 484,600 individual terminals. The items are classified as commercial items and are subject to the Qualified Products List or Qualified Manufacturers List requirements, meaning only approved manufacturers may supply them. Technical compliance is governed by SAE AS21004F Revision F and AS7928 Revision C, with configuration changes requiring formal Engineering Change Proposals or variance requests. Mercury or mercury-containing compounds are expressly prohibited from direct contact with the hardware except for specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with additional containment requirements for portable devices containing mercury in accordance with NAVSEA 5100-003D. All packaging must adhere to MIL-STD-2073-1E, with marking compliant to MIL-STD-129, no special marking required, and palletization in line with DLA packaging guidelines. Barcoding must conform to ISO/IEC 16388. Delivery is FOB origin with the destination being the DLA Distribution facility in New Cumberland, Pennsylvania, and the required delivery date is 158 days after award with a need ship date of January 26, 2027. Inspection and acceptance occur at destination with zero variance permitted in quantity. The contract references the DLA Master List of Technical and Quality Requirements for applicable R and I numbers, and transportation details are governed by DLAD procedures C19 and C20.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M2-26-T-6163
The contract is for a nonmetallic hose assembly, part number 88043-224 with NSN 4720-01-379-4569, with a total quantity of 30 units, each 360 inches (30 feet) in length. The item is classified as a critical application item and must comply with stringent packaging and handling requirements per MIL-STD-2073-1E and DLA packaging standards. Each hose must be securely mounted on a reel, roll, or spool for safe transport, enclosed in a double-walled, weather-resistant fiberboard container (ASTM-D5118 Type CF), and all openings must be sealed with plastic plugs or end caps to prevent contamination. Packaging must include protective wrapping using code CA to reduce abrasion, and marking must conform to MIL-STD-129 with special codes including “ARROW UP” and “OPEN THIS SIDE.” As protected cargo, the item’s nomenclature must be omitted from outer packaging per MIL-STD-129, paragraph 5.4.1.6. The contract enforces zero tolerance for quantity variance and specifies delivery FOB origin with inspection and acceptance occurring at destination. The supplier must comply with DLA’s technical and quality requirements referenced in the DLA Master List and adhere to CMMC Level 2 self-assessment for cybersecurity. Delivery is due within one day of award, with the original required delivery date of January 26, 2027, and the need ship date set for August 22, 2026. Fulfillment must be shipped to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The contractor is obligated to provide shelf life data if applicable and notify the DLA Land and Maritime Contract Administrator for any required updates. The solicitation number is SPE7M2-26-T-6163, issued by the Department of Defense under the Nuclear Reactor Program, with the point of contact being Kirstan Seck.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PIPE, METALLIC
Solicitation # SPE7M2-26-T-6162
This contract specifies the procurement of 101 linear feet of seamless stainless steel pipe, grade TP304, schedule 80, with nominal 1-inch diameter and random lengths between 12 and 24 feet. The item is classified as a commercial item and a critical application component, subject to full and open competition. Technical and quality standards are governed by ASTM A312/A312M Revision B dated May 1, 2025, and all requirements are aligned with the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001. The pipe must be free of intentional mercury or mercury-containing compounds, with exceptions only for approved functional uses such as batteries, instrumentation, or weapons systems, and any portable mercury-containing devices must include shockproof design and secondary containment per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E, including specific preservation, wrapping, and cushioning methods, while marking adheres strictly to MIL-STD-129N with barcoding per AIM BC1. Palletization limits gross weight to 2,000 pounds per lift, and all shipments require compliance with DLA packaging and transportation procedures. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and a quantity tolerance of plus or minus 10 percent applies. The item is identified by NSN 4710-01-155-0196 and purchase request number 7017685265, with a unit price of $101.00 per foot for a total contract value of $10,201. Required delivery is within 158 days of contract award, with an original delivery date of March 27, 2027, and a needed ship date of January 26, 2027. The delivery destination is DLA Distribution San Joaquin, receipt warehouse 57, located at 25600 S Chrisman Rd, Tracy, CA 95304-5000, United States. All shipments must follow DLAD proc notes C19 and C20 for transportation and first destination handling. The solicitation number is SPE7M2-26-T-6162, issued under the NAICS code 332996 by
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-6172
The contract specifies the procurement of washers, lock, identified by NSN 5310000115093, under solicitation SPE7M2-26-T-6172, with a total quantity of 552 hardware units divided into two line items: 55 units and 497 units. All items must conform to technical standards NASM35338 Revision 5 and ASME B18.21.1 Revision 9, with strict adherence to configuration change management and engineering change proposal requirements. Full and open competition applies, and the item is designated as a critical application component. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking processes, except for specific functional uses in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA, with additional containment requirements for portable devices. Packaging must comply with MIL-STD-2073-1E and ASTM D3951, using preservation method code 10, and marking must follow MIL-STD-129 without special marking codes. Palletization must meet DLA packaging requirements, and delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at destination, with delivery timelines of 186 days from contract award. Deliveries are split between two DLA distribution centers: Hill AFB, Utah, and New Cumberland, Pennsylvania, with specific shipping addresses and parcel post instructions provided. The contract enforces compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and all provisions are controlled by the revision in effect on the solicitation issue date. The original required delivery date is March 20, 2027, with need ship dates of June 15, 2027, for the first shipment and February 23, 2027, for the second.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SHEET, ELECT
Solicitation # SPE7M2-26-T-6175
The contract calls for the procurement of electrical insulation sheets measuring 48 inches by 36 inches by 0.75 inches, with a total quantity of 2,199 sheets, unit of issue being SHEET. The material must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and only approved suppliers—K-FLEX USA L.L.C. with part number 6RSHF3X4068 and ARMACELL LLC with part number NHS34043—are authorized. Mercury and mercury-containing compounds are strictly prohibited in the product, its packaging, preservation, or marking, with limited exceptions for functional applications like batteries or instruments specified by NAVSEA, which must include secondary containment and be shockproof per NAVSEA 5100-003D. The insulation sheet is designated as a critical application item, requiring full compliance with all DLA packaging guidelines including MIL-STD-2073-1E and MIL-STD-129 for marking, no special marking is required, and palletization must follow RQ001 standards. Delivery is FOB origin with zero variance allowed in quantity, inspected and accepted at destination. The delivery deadline is 134 days after award, with a required ship date of January 2, 2027, and original delivery date of February 2, 2027. All shipments must be sent to DLA Distribution San Diego at the designated address, and transportation protocols follow specific DLAD procedural notes. The solicitation number is SPE7M2-26-T-6175, with a response deadline of August 20, 2026, and the contract falls under NAICS code 335932 for the Department of Defense’s Nuclear Reactor Program.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6186
The contract pertains to the procurement of 4,637 plain hexagon nuts identified by NSN 5310-01-089-3714 under solicitation SPE7M2-26-T-6186, issued by the Department of Defense’s Nuclear Reactor Program. The nuts are sourced in full competition in compliance with applicable military or federal specifications, and the solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on the acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The delivery timeline requires fulfillment within 151 days after order, with performance taking place at Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is categorized under NAICS code 332722 for fastener manufacturing. Primary point of contact for inquiries is David Larsen, reachable via email and phone provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-T-6181
This contract is for the procurement of TERMINAL, LUG with NSN 5940-01-054-6295, under solicitation SPE7M2-26-T-6181, requiring 684 packages, where each package contains 100 units. The item is classified as a commercial item and is subject to a Qualified Products List or Qualified Manufacturers List, meaning only approved suppliers may fulfill the contract. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. Configuration changes require formal Engineering Change Proposal or variance requests, and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses such as batteries, lights, or weapon systems, with additional containment and safety requirements per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129, no special markings required, and barcoding in accordance with ISO/IEC 16388. The product is designated a Critical Application Item and must meet SAE AS21004F and AS7928 revisions dated 2023 and 2019 respectively, with part number MS21004-4. Delivery is FOB origin with a 151-day lead time, no variance allowed in quantity, and inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required delivery date is April 6, 2027, with a need ship date of January 19, 2027. Transportation and shipping follow DLA Procurement Notes C19 and C20. The contract is issued by the Department of Defense under the Nuclear Reactor Program, with primary point of contact Vlada Artyemova, and was posted on August 9, 2026, with proposals due by August 20, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M2-26-T-6166
This contract pertains to the procurement of a switch assembly identified by NSN 5930016055090 and part number 159400G1, with a total quantity of three units to be supplied under solicitation SPE7M2-26-T-6166. Delivery is required within 158 days of award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with DLA packaging requirements, including MIL-STD-2073-1E and MIL-DTL-28786 for preservation and packaging, as well as MIL-STD-129 for marking. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or reagents specified by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging must be palletized per DLA guidelines, with no hazardous material transport allowed via parcel post unless following DLAD PROC NOTE C19 and C20. The designated delivery address is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract is a total small business set-aside under NAICS code 334419, with a response deadline of August 20, 2026, and the award is anticipated to be made by the Nuclear Reactor Program under the Department of Defense. The unit price is $3.00 per item, with an aggregate total price of $9.00.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6169
The contract specifies the procurement of 30 plain hexagonal nuts with a 0.875 inch diameter, threaded to 0.875-14UNF-2B, manufactured from nickel alloy grade 500 in an annealed and hardened condition. These nuts are defined as a commercial item and must conform to the current revision of MIL-DTL-1222J, with historical production to prior but當時有效 revisions still acceptable. Mandatory identification includes the material symbol .K., the manufacturer's symbol, and lot number as required by MIL-DTL-1222J paragraph 3.13, and additional marking per MIL-STD-130N. The item is classified as critical application hardware and may not contain mercury or mercury compounds except under specific, narrowly defined exceptions such as functional use in batteries, instruments, or weapon systems, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must comply with MIL-STD-2073-1E, using preservative method 10, with marking per MIL-STD-129 and no special markings required. Palletization follows DLA packaging requirements, and delivery is FOB origin to Tracy, California, with a 165-day delivery schedule, inspection and acceptance occurring at destination, quantity strictly fixed at 30 units with no variance allowed.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details