Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONNECTING LINK, RIGID

Active
SPE7L3-26-T-248UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support under solicitation number SPE7L3-26-T-248U, is for the procurement of 35 units of a rigid steel tube assembly connecting link, identified by NSN 3040-00-615-8802. The contract falls under NAICS code 336411 and requires delivery within 168 days after receipt of order. Performance is located in Barstow, California, and the procurement is conducted through full and open competition with a response deadline of September 21, 2026. The agreement incorporates strict technical and quality standards from the DLA Master List, including specific packaging requirements and the removal of government identification from non-accepted supplies. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training. Additionally, the contract mandates compliance with Covered Defense Information standards and Cybersecurity Maturity Model Certification Level 2 requirements. Certificate of Conformance procedures are authorized per FAR 52.246-15 unless otherwise instructed by quality assurance.

General Info

DoD seeks 35 rigid steel tube assemblies for Barstow, CA by September 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

REC OFFICER 442-295-4148, BARSTOW, CA, 92311-5014, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-248U Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
Benita Umoren
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTING LINK,RIGID
TUBE ASSEMBLY. STEEL.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
RD002, COVERED DEFENSE INFORMATION APPLIES
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3040-00-615-8802 Quantity: 35 EA Purchase Request: 7018269350QTY: 35 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336411
New
DIBBS
53--COVER,ACCESS
Solicitation # SPE7L1-26-T-10U1
This contract between the Defense Logistics Agency and Lockheed Martin Corp involves the procurement of 13 units of part number 0001S00000052 with a delivery timeline of 498 days after order. The agreement is a total small business set-aside under NAICS code 336411, with performance taking place at Robins Air Force Base. The contract mandates strict adherence to DLA technical and quality requirements, including a prohibition on Class I ozone depleting chemicals and specific packaging and government identification standards. A critical component of the agreement is the government fit verification testing for first article units, requiring the submission of test reports, material certifications, and process operation sheets before full production. Additionally, the contract is subject to stringent export controls under ITAR and EAR regulations, requiring contractors to have approved JCP certification and completed specialized training to access technical data.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
DIBBS
53--GASKET
Solicitation # SPE7LX-26-U-002N
This solicitation from the Department of Defense Strategic Acquisition Program Directorate is for the procurement of 683 gaskets under part number 5330-01-083-3070. The contract requires delivery within 97 days after receipt of order and falls under NAICS code 336411. The agreement mandates strict compliance with cybersecurity and data protection standards, including CMMC Level 2 certification and the protection of covered defense information. Additionally, the item is subject to stringent export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data. All packaging and marking must adhere to DLA and MIL-STD-130N specifications.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336411
New
Federal
PACAF - Small Unmanned Aircraft System
Solicitation # FA521526N0002
The U.S. Air Force, through the 766th Enterprise Sourcing Squadron, is conducting a virtual industry day to gather market research and industry feedback for the contemplated Maui Base Operations Support Services and Construction effort, which encompasses Base Operations Support (BOS) services and design-build construction projects supporting the 15th Space Surveillance Squadron on the Island of Maui. This event, scheduled for June 16–17, 2026, is strictly for information sharing and does not constitute a request for proposals, nor does it obligate the government to issue a future solicitation or award a contract. Participation is voluntary, and all costs associated with attending or responding are borne solely by the vendors. The industry day includes a general overview session followed by limited one-on-one meetings of 15 minutes each, which may extend into the second day depending on vendor participation. Registration is mandatory and must be completed by June 9, 2026, using Attachment 03, with a maximum of three representatives per company allowed. Vendors are encouraged to submit questions in advance to optimize session time. All sessions will be recorded, and transcripts along with attendance rosters will be published on SAM.gov afterward. References to Attachment 01 and Attachment 02 indicate that the Primary and Supplemental Draft Performance Work Statements outline scope requirements for IT services, engineering support, logistics functions, environmental management, and construction activities, including specific deliverables such as annual operating instructions, monthly activity reports, phase-out plans, engineering studies, and weekly ticket tracking. Performance standards require an 80% resolution rate for mission-critical IT outages within 24 hours, 95% accuracy for project documentation, and adherence to government standards without deviations unless pre-approved. Key personnel must hold at least a U.S. Secret clearance, with certain IT roles requiring Top Secret or TS/SCI clearances, and all personnel must be U.S. citizens proficient in English. The contractor must establish a Facility Security Officer, comply with the National Industrial Security Program Operating Manual and local antiterrorism plans, and ensure continuous mission performance during emergencies. Contract line items include firm fixed price structures for routine services and an “over and above” CLIN for irregular work, critical spares, and travel. The contract also mandates compliance with Davis-Bacon wage rates and Service Contract Act labor categories, requires government property to be clearly marked, and asserts that all deliverables and data developed are the property of the U.S. Government. All documentation must be
FA5215 766 Ess Pkp

POSTED

about 2 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336411
New
DIBBS
Supply of Air Brake Chambers (NSN 2530-01-731-1189)
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
DIBBS
Supply of Socket Head Cap Screws (NAS1351N6-20)
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-232D
This solicitation is for the procurement of 17 gaskets, identified by part number 10310-09 and NSN 5330-01-121-8378, for the Department of Defense under the Land Supplier Opns Vehicle Spt agency. The contract specifies a delivery timeline of 168 days after the order is placed and requires compliance with DLA packaging and quality standards. The place of performance is located in Tracy, California. Strict material restrictions are in place for this item, explicitly prohibiting the use of asbestos as defined in FED-STD-313 and the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. The procurement is managed under solicitation number SPE7L3-26-T-232D with a response deadline of September 21, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-393K
This contract is for the procurement of 443 gaskets, identified by NSN 5330-00-897-6697 and part number 12048-1. The items are designated as critical application items with a non-extendable shelf life of 180 months. Delivery is required within 155 days, with a required delivery date of March 4, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Specifically, the gaskets must be sealed in opaque, waterproof, and greaseproof bags to prevent deterioration from ultraviolet rays. Environmental restrictions prohibit the use of asbestos, class I ozone-depleting chemicals, and the intentional addition of mercury, except in specific authorized cases. All technical and quality requirements are governed by the DLA Master List.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-236H
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 28 gaskets under solicitation number SPE7L3-26-T-236H. The items are identified as commercial products and must be delivered within 43 days after the order is placed. The contract specifies that all supplied items must be completely free of asbestos, and any alternative materials used must be approved according to specific contractual clauses. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards and identification marking per MIL-STD-130N. Because the items fall under federal supply classifications susceptible to ultraviolet degradation, they must be packaged in medium duty, waterproof, greaseproof, and opaque bags following MIL-DTL-117 specifications. These requirements apply across all delivery methods, including direct vendor delivery and foreign military sales.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-237B
Solicitation SPE7L3-26-T-237B is a request for quotations issued by DLA Land and Maritime for the procurement of 158 gaskets, identified by NSN 5330-00-899-1493. The procurement is categorized under NAICS code 336411 and requires delivery to Cherry Point, North Carolina. The offer deadline is September 21, 2026, with a delivery requirement of 168 days after order. All submissions must be processed through the DIBBS system, and invoicing and receiving reports must be managed via the Wide Area WorkFlow system. The contract mandates strict adherence to technical and quality requirements, including a total prohibition of asbestos and restrictions on the intentional addition of mercury. Packaging must comply with MIL-STD-2073-1E and RP001, specifically requiring the use of medium duty, waterproof, greaseproof, opaque bags for items susceptible to ultraviolet ray deterioration. Marking must follow MIL-STD-129 and MIL-STD-130N. The award is subject to the Buy American Act, the Berry Amendment, and various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the safeguarding of covered defense information. Inspection and acceptance will occur at the destination.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-386T
This contract is a solicitation for the procurement of 57 gaskets under solicitation number SPE7M4-26-T-386T for the Department of Defense Fluid Handling Division. The items must measure 36.00 inches by 36.00 inches with a thickness of 0.015 inches and must be manufactured without asbestos or intentionally added mercury. The hardware must comply with current military or consensus non-government part standards, with a delivery requirement of 168 days after order. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing zero-based sampling plans unless otherwise specified. The contract incorporates specific DLA technical and quality requirements, including RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. This is a fully competitive procurement under NAICS code 336411, with performance located in New Cumberland, Pennsylvania.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7L3-26-T-234X
This contract is a solicitation for the procurement of 46 spiral wound gaskets, identified by part number M24716 TY 2 CL B 8.00 NPS 600 PSI CRPL and NSN 5330-01-420-0085. The items must be manufactured according to the current revision of the applicable military or consensus non-government part standard. Delivery is required within 168 days after the order is placed. The agreement mandates strict adherence to DLA packaging requirements and quality standards, with sampling conducted according to MIL-STD-1916 or ASQ H1331. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional cases approved by NAVSEA. The procurement is open to full competition under NAICS code 336411 and is managed by the Department of Defense Land Supplier Operations Vehicle Support.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-240X
This contract is for the procurement of 175 gaskets, identified by NSN 5330-01-491-6709 and Sauer Compressors USA P/N 037904. This is designated as a critical application item. The delivery timeline is set for 168 days after order, with a required delivery date of March 13, 2027. Shipping is FOB Origin and destined for DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, specifically citing MIL-STD-129 and MIL-STD-2073-1E. Because the items may deteriorate when exposed to ultraviolet rays, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by NAVSEA specifications.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 331210
New
DIBBS
Armor-Grade Material Supply
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Ballistic and First Article Testing (FAT) Services
Testing Laboratories and Services

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332312
New
DIBBS
Armored Vehicular Window Frame Manufacturing
Fabricated Structural Metal Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
53--PARTS KIT,SEAL REPLACE
Solicitation # SPE7L3-26-T-248P
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of three seal replacement parts kits for mechanical equipment under NSN 5330-01-598-1569. The contract is designated as a total small business set-aside under NAICS code 339991, with a required delivery timeframe of 168 days after the order is placed. Performance is located in Tracy, California. The agreement is subject to several strict technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Contractors must adhere to source approval request documentation and maintain supply chain traceability documentation in accordance with DLA Directive Procurement Note C03. All technical and quality requirements are governed by the DLA Master List based on the solicitation or award date.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333612
New
DIBBS
30--CLUTCH,POSITIVE,NONVEH
Solicitation # SPE7L3-26-T-248E
This solicitation, numbered SPE7L3-26-T-248E, is a total small business set-aside issued by the Department of Defense for the procurement of 207 nonvehicular positive clutches under NSN 3010-00-804-9979. The contract requires delivery within 700 days after receipt of order and specifies that the item is a restricted source requiring government engineering source approval. Performance is designated for Hill AFB. Compliance requirements are stringent, including CMMC Level 2 certification for third-party assessments and strict adherence to export controls under ITAR and EAR regulations. The contractor must avoid the use of Class I ozone-depleting chemicals and comply with DLA packaging, marking, and configuration change management standards. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
53--SEAL,INFLATABLE
Solicitation # SPE7L3-26-T-247F
This solicitation is for the procurement of 11 inflatable seals under National Stock Number 5330-00-225-2287 for the Department of Defense Land Supplier Operations Vehicle Support. The contract is set aside for Women-Owned Small Businesses and requires delivery within 122 days after the order is placed. Performance will take place in New Cumberland, Pennsylvania. The supplier must adhere to several technical and quality standards, including MIL-STD-130N for identification marking and specific DLA packaging requirements. Because the items are susceptible to ultraviolet rays, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Additionally, all supplied items must be completely free of asbestos, and any alternative materials must be approved according to specified clauses.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
25--ARM,SKID
Solicitation # SPE7L3-26-T-247V
This solicitation is for the procurement of one ARM, SKID, identified by NSN 2590-99-235-5611 and Pearson Engineering Limited part number PE21482. Issued by the Department of Defense Land Supplier Operations Vehicle Support, the contract is a total small business set-aside under NAICS code 336390. The required delivery date is April 27, 2027, with a delivery window of 168 days after order. The item is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is required, alongside specific DLA packaging requirements outlined in RP001. Inspection and acceptance will take place at the destination.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
25--FRAME,ARMOR,VEHICULAR
Solicitation # SPE7L3-26-Q-1327
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 50 vehicular armor frames under solicitation number SPE7L3-26-Q-1327. The contract requires delivery within 154 days after the order is placed and specifies part number 2541-01-669-5402. Performance is located in Tracy, California, and the primary point of contact is Eric Deck. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a Third-Party Assessment Organization and adherence to DLA master technical and quality requirements. The contract mandates strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-controlled technical data training. Additionally, specific DLA packaging requirements and the removal of government identification from non-accepted supplies are mandatory.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
25--CUSHION,SEAT,VEHICULAR
Solicitation # SPE7L3-26-U-0751
This contract, identified as SPE7L3-26-U-0751, is a solicitation from the Department of Defense Land Supplier Operations Vehicle Support for the procurement of 206 vehicular seat cushions. The items are identified by NSN 2540-01-566-3842 and part number 115-203510-001. Delivery is required within 140 days, with the FOB point set as origin and both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Depending on the hazardous nature of the material, packaging must follow either TQ requirement IP025 or ASTM D3951. All technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336330
New
DIBBS
25--PITMAN ARM,STEERING,VE
Solicitation # SPE7L3-26-T-246N
This contract, solicitation number SPE7L3-26-T-246N, is a total small business set-aside under NAICS code 336330 for the procurement of 277 vehicular steering pitman arms. The items are identified by NSN 2530-01-565-7606 and correspond to R. H. Sheppard Co. Inc. part number 2596924 and AM General LLC part number 6035075. This is designated as a critical application item, and the procurement is managed by the Department of Defense through the DLA Land Supplier Operations Vehicle Support agency. The delivery requirement is set for 89 days after order, with a need ship date of December 20, 2026, and an original required delivery date of January 22, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, including specific mandates for the removal of government identification from non-accepted supplies.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
25--FRAME,ARMOR,VEHICULAR
Solicitation # SPE7L3-26-Q-1325
This solicitation from the Department of Defense, specifically the Land Supplier Opns Vehicle Spt agency, is for the procurement of three vehicular armor frames under part number 2541-01-575-0887. The contract requires delivery within 360 days after the order is placed and is subject to full and open competition. Performance is centered in Jacksonville, and the primary point of contact is Eric Deck. The agreement is governed by several strict technical and quality requirements, including specific DLA packaging standards, configuration change management, and quality conformance inspections. Notably, the project involves technical data subject to ITAR and EAR export controls, meaning access is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
30--CYLINDER ASSEMBLY,ACTU
Solicitation # SPE7L3-26-T-247R
Solicitation SPE7L3-26-T-247R is a fixed-price request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of two linear actuating cylinder assemblies, identified by NSN 3040-01-534-6215. The items must be produced according to Technical Data Package Rev B Gen 2 and delivered within 168 days of award, with an original required delivery date of November 25, 2027. Inspection and acceptance will occur at the point of origin. To be eligible for award, offerors must maintain an approved US/Canada Joint Certification Program certification and be authorized to access export-controlled technical data subject to ITAR or EAR regulations. Quality standards require manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. The procurement includes a price evaluation preference for certified HUBZone small businesses and mandates compliance with the Buy American Act and the Berry Amendment. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129 and MIL-STD-130 for item unique identification. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS