Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONNECTOR, RECEPTACL

Active
SPE7M5-26-Q-0760Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a single electrical connector receptacle identified by NSN 5935-01-408-8412 and part number M83723/72G2443N, compliant with MIL-DTL-83723H Rev H and MIL-DTL-83723/72E Rev E standards. The item is subject to strict quality controls as it is listed on the Qualified Products List and must meet all requirements outlined in Procurement Note H01 for FSC 5935 connector assemblies and contacts. The use of ozone-depleting substances is strictly prohibited in any phase of manufacture or processing unless formal written approval is obtained from the contracting officer, and all packaging must adhere to MIL-STD-2073-1E and DLA’s proprietary packaging requirements, including marking per MIL-STD-129 with no special markings required. The item must be shipped via traceable means, explicitly excluding parcel post, and delivered to the specified government facility in Klamath Falls, Oregon. The pricing is firm fixed at one unit, with zero tolerance for variance in quantity, and delivery is mandated within 150 days after the order date. Inspection and acceptance occur at the destination point, with FOB origin terms applying. The contract is governed under DLA’s master technical and quality requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. All configuration changes require formal engineering change proposals for variance or waiver approvals. The solicitation number is SPE7M5-26-Q-0760, with a response deadline of August 1, 2026, and performance scheduled for delivery no later than June 29, 2026. The item falls under NAICS code 334417, procured by the Department of Defense through the Active Devices Division, with primary point of contact Shannon Tate.

General Info

One electrical connector receptacle, NSN 5935-01-408-8412, firm fixed price, delivery by June 29, 2026, to Klamath Falls, Oregon.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-Q-0760.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
TATE SHANNON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,RECEPTACLE,ELECTRICAL RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE (ODS) IN THE DESIGN, MANUFACTURING, TESTING, CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM UNDER ANY MILITARY OR FEDERAL SPECIFICATION, STANDARD OR DRAWING REFERENCED IN THIS ITEM DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS OBTAINED. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS DEFINED IN "FAR 11.001" OR TO PART-NUMBEREDONLY ITEMS.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-83723H(4) SUP 1 REVISION NR H DTD 01/26/2024 PART PIECE NUMBER: M83723/72G2443N
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-83723/72E(2) NOT 2 REVISION NR E DTD 08/03/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7M5-26-Q-0760
SECTION B
SUPPLY/SERVICE: 5935-01-408-8412 CONT'D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 5935-01-408-8412 1.000 EA $ _______________ $ ______________ CONNECTOR ,RECEPTACL
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 150 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C UNIT CONT:D3 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB6372
FB6372 173 LRS LGRDD BLDG CP 541 885 6136 223 ARNOLD AVE STE 13 KLAMATH FALLS OR 97603-2111 US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB6372
FB6372 173 LRS LGRDD BLDG CP 541 885 6136 223 ARNOLD AVE STE 13 KLAMATH FALLS OR 97603-2111 US
M/F: (TCN) FB637261750278 RDD: PROJ: TP 3 SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: 01 ADV: 2D FC: 6C
SPE7M5-26-Q-0760
SECTION B
SUPPLY/SERVICE: 5935-01-408-8412 CONT'D
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017351411 0001 N/A N/A N/A 06/29/2026

SPE7M5-26-Q-0760 NSN/Part Number: 5935-01-408-8412 Quantity: 1 EA Purchase Request: 7017351411QTY: 1 Delivery: 150 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract specifies the procurement of four electrical plug connectors identified by NSN 5935-01-369-5686 under solicitation SPE7M5-26-Q-0756, with a firm fixed price and zero tolerance for quantity variance. The item must comply with strict technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, including qualification standards from the Qualified Products List for Federal Stock Class 5935 connector assemblies and electrical contacts. It must be manufactured to TDP Revision A Generation 1 in accordance with MIL-DTL-83723H(4) Sup 1 and referenced specification MIL-DTL-83723/95G(1), with physical identification and bare item marking as required. Packaging must adhere to DLA-specific guidelines, including MIL-STD-129 labeling, and conform to either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with palletization following RP001. The unit of issue is each, and delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery deadline 169 days after order date. Inspection and acceptance occur at destination, and all packaging and marking must be performed in strict compliance with DLA directives that supersede commercial standards. The contract calls for transportation per DLAD procedural notes and lists the government point of contact and delivery details, with a scheduled ship date of January 15, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
Federal
Titanium ConnectorsThis solicitation is a combined synopsis and request for quote for commercial-grade connectors under RFQ N66604-26-Q-0479, issued by the Naval Undersea Warfare Center Division Newport. The requirement is strictly for Brantner & Associates (doing business as TE Connectivity) part numbers MSXL12BCRTI, MSXL10BCRTI, and MSXL8BCRTI, with ten units of each required. No alternative parts will be accepted due to the critical nature of modernization efforts and the prohibitive cost and delays associated with qualifying new connectors. Only authorized distributors of Brantner & Associates may respond, and proof of authorized distributor status must be provided. The contract will be awarded as a Firm Fixed Price purchase order under a Lowest Priced, Technically Acceptable evaluation method, with delivery due no later than seventeen weeks after award and F.O.B. Destination to Newport, RI. All submitted items must be new, sourced directly from the OEM or its authorized channels, and shipped from within the United States; gray market or refurbished products are strictly prohibited. Contractors must provide proof of U.S. origin and new product status, and failure to comply may result in termination for cause and liability for re-procurement costs. Each item must be uniquely identified with a UID if its acquisition cost is $5,000 or more, and payment will be processed electronically via WAWF. Submission must include SAM registration verification and comply with all incorporated FAR and DFARS clauses covering cybersecurity, labor standards, Buy American rules, export controls, and contractor obligations. Quotes are due by July 31, 2026, at 2:00 PM Eastern Time, and late submissions will not be considered. Any questions should be directed to Franklin Patton at the provided Navy email address.
Nuwc Division Newport

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, EThe item is an electrical connector receptacle with NSN 5935-01-339-5850, requested in a quantity of 19 units under purchase request 7017601032, with a total quantity of 362 associated with the solicitation. Delivery is required within 129 days after the award date. The solicitation, issued by the Department of Defense’s Active Devices Division, carries the identification number SPE7M5-26-T-352E and was posted on July 23, 2026, with responses due by August 3, 2026. The NAICS code 334417 identifies this as part of the electronic component manufacturing sector. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Access is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled technical data, and have received explicit approval from the DLA controlling authority. The primary point of contact for inquiries is Margaret Smith, reachable via email and phone provided, and performance is to occur in San Diego, California, 92136-3581.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract specifies the procurement of one electrical plug connector identified by NSN 5935-01-097-4219 and part number WTAX40SECSY from AIRBORN INTERCONNECT, LLC, under solicitation SPE7M5-26-T-349X. Delivery is required within ten days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must adhere to MIL-STD-129 for labeling and marking. Hazardous material handling, if applicable, must follow Fed-Std-313 and TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable only if not overridden by DLA standards. Palletization must meet RP001 DLA packaging requirements, and the unit of issue is each (EA). The item is designated as a critical application component. The delivery destination is AL DHAFRA AIR BASE, AE, under military logistics code W910DH, with the shipment reference RDD 555 and project code 9AL TP 2. Transportation and freight instructions are governed by DLAD PROC NOTES C19 and C20. The contract mandates removal of government identification from non-accepted supplies and physical marking of the bare item. The original required delivery date is July 21, 2026, and the solicitation response deadline is August 3, 2026, with a post date of July 23, 2026. The primary point of contact is Margaret Smith of the Active Devices Division, Department of Defense, and the procurement falls under NAICS code 334417. Government use fields indicate specific distribution and forwarding codes for internal tracking.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThis contract pertains to the procurement of an electrical plug connector, identified by part number 10-260390-07S and NSN 5935-00-490-4523, with a quantity of three units to be delivered within 35 days under solicitation SPE7M2-26-T-5745. The product must comply with military specification MIL-DTL-55330 and adhere to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with no special markings required, and preservation methods specified in SPE7M2-26-T-5745 Section B. The item is classified as a restricted source requiring government engineering approval, and bare parts must be marked with the contract number, NAWC CAGE, and part number unless superseded by associated drawings. The contract prohibits the use of Class I ozone-depleting chemicals and strictly forbids the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, weapon systems, and specific navsea-approved reagents. Portable mercury-containing devices must feature shock-proof construction and secondary containment per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The item does not require unique identification per DFARS 252.211-7003(c)(1)(i), and all requirements are enforceable under the terms of the purchase request 7015894423, with a total contract value of $3.00 per unit.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAL CThis contract specifies the procurement of a backshell for an electrical connector and a cable clamp adapter under NSN 5935-01-281-0060, with a total quantity of 19 units to be delivered within 168 days of contract award. The items must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the use of any Class I ozone-depleting substances is strictly prohibited in design, manufacturing, testing, or cleaning unless written approval is obtained from the contracting officer, with exceptions applying only to commercial items as defined under FAR 11.001 or part-numbered-only items. Packaging and preservation must adhere to MIL-DTL-55330 for connectors and MIL-STD-2073-1E for packaging data, with marking requirements following MIL-STD-129 and no special marking code applied. The delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The items must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery target of January 13, 2027. Only approved part numbers from Glenair, Inc. and Joslyn Sunbank Company, LLC are acceptable, and all transportation and shipping procedures must conform to DLA procedural notes C19 and C20.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract specifies the procurement of a connector, receptacle with NSN 5935-01-351-5612 and part number 82-4454 manufactured by AMPHENOL CORPORATION, for a quantity of 57 units at a unit price of $57.00, totaling $3,249.00. Delivery is required within 119 days from the contract award with FOB origin terms, inspection and acceptance occurring at the destination. The item is designated as a critical application item, and all packaging and marking must strictly comply with DLA Master List of Technical and Quality Requirements, specifically RP001 and MIL-STD-129, superseding ASTM D3951. Packaging must follow Fed-Std-313 guidelines, with hazardous materials requiring TQ requirement IP025 compliance. The use of Class I ozone-depleting substances in any process related to the item is prohibited unless explicit written approval is obtained from the Contracting Officer, with exceptions only for commercial items as defined in FAR 11.001 or numbered-only parts. The item must be palletized per RP001 and labeled with the correct Unit of Issue and Quantity per Unit Pack as specified. The delivery address is DLA Distribution Depot Oklahoma at Tinker AFB, and the original required delivery date is January 2, 2027, with a need ship date of December 1, 2026. Transportation protocols must adhere to DLAD Proc Notes C19 and C20, and all technical and quality specifications referenced through R and I numbers in the DLA Master List govern performance.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, ELECTRICAL PLUThe contract specifies the procurement of an electrical plug adapter, quick disconnect, with part numbers 400HS011NF2510L from Glenair Inc. and HS5842ZS2510L from The Boeing Company, identified by NSN 5935014680608. A total quantity of 42 units is required at a unit price of $42.00, with delivery due in 168 days under the contract number SPE7M5-26-T-345R. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards, including ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Packaging must follow RP001 guidelines, with hazardous materials requiring special handling per FED-STD-313 and TQ requirement IP025, while non-hazardous items must be commercially packaged. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331, Table 1, with a zero-defect acceptance criterion unless otherwise noted, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The designated delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, and the ship date is January 19, 2027, with the original required delivery date set for February 28, 2027. Transportation and shipping instructions are governed by DLAD proc notes C19 and C20.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThe contract pertains to the procurement of 60 electrical receptacle connectors identified by NSN 5935-01-195-3655 under solicitation SPE7M5-26-T-350L, with a response deadline of August 3, 2026, and a delivery requirement of 63 days after award. The item is governed by DLA packaging requirements and incorporates technical and quality standards referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Department of Commerce, including U.S. subsidiaries and foreign national employees. Contractors seeking access to this controlled data must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and be formally approved by DLA. Additional requirements include the removal of government identification from nonaccepted supplies, physical marking of bare items, and compliance with covered defense information protocols. The place of performance is specified as New Cumberland, Pennsylvania, with Barbara Hoffmann of the Active Devices Division, Department of Defense, listed as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CONNEThe contract is for the procurement of 11 units of a COVER, ELECTRICAL CONNECTOR with NSN 5935-01-167-8509, sourced under solicitation SPE7M5-26-T-344D. Delivery is required in 168 days FOB origin, with no quantity variance permitted and inspection and acceptance occurring at the destination warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking codes. The item is designated as a critical application component and must conform to technical data referenced in the DLA Master List of Technical and Quality Requirements, with specific compliance required even if referenced documentation is incomplete. Approved vendor part numbers include BLRCW15 from Cooper Interconnect, Inc. and DIV4-15 from TE Connectivity Corporation, with design governed by reference drawing NR 53711 5223490 Revision C dated 07/24/1991. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds into the product or its direct contact, with limited exceptions for functional uses in batteries, lamps, instruments, or weapon systems as specified by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. ESA approval is mandatory for all non-approved sources. The delivery deadline is set for February 24, 2027, with an original ship date of January 19, 2027, and the contracting office is the Department of Defense’s Active Devices Division, with primary contact Margaret Smith. All shipments must adhere to DLA transport procedures C19 and C20, and the unit of issue is each (EA).
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, EThis contract pertains to the procurement of a commercial-type electrical connector receptacle identified by NSN 5935-01-192-8929 and part number M83723/83W1212N, governed by military specification MIL-DTL-83723H(4) Supplement 1 with Revision H dated January 26, 2024. The item is classified as a qualified product requiring adherence to the Qualified Products List for Federal Stock Class 5935, with specific requirements for removable crimp-type contacts that must not be pre-installed in the connector insert but instead stored in a noncorrosive rigid container such as a vial or box, enclosed within the unit container. Spare contacts must also be included in this container. All packaging must comply with MIL-STD-2073-1E and marking per MIL-STD-129, including special labeling for superseded and current contact part numbers as defined by SAE-AS39029. The item is designated as a critical application item and is subject to strict prohibitions on mercury and ozone-depleting substances, with exceptions limited to functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents. Portable mercury-containing devices must include a secondary containment boundary as mandated by NAVSEA 5100-003D. The contract calls for a quantity of 211 units to be delivered FOB origin within 168 days, with no variance allowed in quantity. Inspection and acceptance occur at destination, and all shipments must conform to DLA packaging and marking standards. The delivery address is the DLA Distribution Depot Hill in Hill AFB, Utah, with transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 5, 2027, with a needed ship date of January 19, 2027. The unit price is $211.00 per each, with total contract value reflecting this pricing. The solicitation number is SPE7M5-26-T-340Y, issued on July 23, 2026, with a response deadline of August 3, 2026. The contracting activity is managed by the Department of Defense’s Active Devices Division, with primary point of contact Margaret Smith. This
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, EThis contract specifies the procurement of a_connector, receptacle, electrical_ with part number M55116/10-0, compliant with MIL-DTL-55116D and MIL-DTL-55116/10C standards, and is classified as a qualified item under the Qualified Products List (QPL) for Federal Stock Class 5935. The item is designated as a critical application component and must be manufactured using a forging process, with tooling requirements that necessitate coordination with DLA’s Aviation or Land & Maritime Supply Chains. Strict prohibitions are in place regarding the use of Class I ozone-depleting substances in any phase of production, unless written approval is obtained from the contracting officer, and mercury or mercury-containing compounds are banned from direct contact with the item except under specific exempted uses such as in batteries, lighting, or sensors per NAVSEA guidelines. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization conforming to DLA packaging requirements. The item must be delivered FOB origin within 168 days, with zero tolerance for quantity variance, and is subject to destination inspection and acceptance. The contract, issued under solicitation SPE7M5-26-T-345G, covers a quantity of 317 units at a unit price of $317.00 for a total value of $100,489.00, with NSN 5935-01-356-8083 and procurement request number 7017601660. The delivery is slated for January 19, 2027, with an original required delivery date of December 18, 2026. Hazardous material packaging and shipping are governed by IP025, and all shipments must be addressed to DLA Distribution Warner Robins at Robins AFB, Georgia. Transportation and freight procedures follow specific DLA proc notes C19 and C20. Full and open competition applies, and compliance with the DLA Master List of Technical and Quality Requirements is mandatory, governed by the revision in effect on the solicitation or award date depending on acquisition type. The contracting officer’s point of contact is Brittany Luster, and the solicitation response deadline was August 3, 2026
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 333924
New
DIBBS
MODULE, OPER PRESENCThis contract pertains to the procurement of a MODULE OPER PRESENCE item identified by NSN 5999-01-575-6564, with a quantity of ten units to be delivered within 100 days after order date. All supplies must comply with stringent DLA packaging standards as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking, including specific packaging methods, containment materials, and palletization requirements aligned with RP001. The item is subject to strict prohibition of mercury and ozone-depleting substances, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, weapon systems, and naval-specified reagents, and requires secondary containment for mercury-bearing portable devices per NAVSEA 5100-003D. No class I ozone-depleting substances may be used in manufacturing or processing without explicit written approval from the contracting officer, and this restriction overrides any conflicting specification unless the item qualifies as commercial under FAR 11.001. Contractors seeking to substitute the approved source must submit documentation from the original manufacturer for prior approval. Delivery is FOB origin to DLA Distribution San Joaquin in Tracy, CA, with inspection and acceptance occurring at the destination. The unit of issue is each, with zero variance allowed, and special marking is not required. Technical data is not available at the issuing center. The solicitation number is SPE7M5-26-Q-0758, with a response deadline of August 1, 2026, and a performance address tied to the government warehouse in Tracy. The item is linked to purchase request 7017039444 with a required ship date of September 17, 2026.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBThe contract pertains to the procurement of 20 units of a circuit card assembly with NSN 5998-01-694-4978 under solicitation SPE7M5-26-Q-0757, with a response deadline of July 31, 2026, and a delivery requirement of 364 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicability determined by the solicitation or award date depending on acquisition size. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization. The item contains covered defense information subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location and requiring strict adherence to DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and explicit DLA authorization. Removal of government identification from non-accepted supplies is required, and packaging must meet DLA standards. The contracting office is the Department of Defense’s Active Devices Division, with primary point of contact Thomas Mitchell, and performance is under U.S. jurisdiction.
Bare Printed Circuit Board Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThe contract is for the procurement of two electromagnetic relays with part number RA-3100L and NSN 5945-01-464-8886, under solicitation SPE7M5-26-T-351S, which is a total small business set-aside. Delivery is required within 168 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, including special marking code ZZ for additional requirements, and must be palletized according to DLA standards. The relays must be free of intentional mercury or mercury compounds, except in limited exempted applications such as batteries, fluorescent lamps, sensors, or weapon systems approved by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Each individual unit package must be marked in accordance with IPC/JEDEC J-STD-609 to identify lead content and other attributes, with placement strictly following the standard’s guidelines. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The required ship date is January 19, 2027, with an original delivery deadline of November 18, 2026. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List and are binding.
Relay and Industrial Control Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
DIBBS
ADAPTER, CONNECTORThis contract is for the procurement of 10 units of an adapter connector with NSN 5935-00-201-2755 and part number 799-5 from Winchester Interconnect Corporation, under solicitation SPE7M5-26-T-341S. The item is classified as a critical application item and must comply with all DLA packaging, marking, and technical requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Strict prohibitions apply to the intentional use of mercury or mercury-containing compounds in the product, preservation materials, packaging, and marking, with narrow exceptions for specific functional uses such as batteries, fluorescent lamps, sensors, and weapon systems, provided they meet Navy specifications including double containment and shock-proofing per NAVSEA 5100-003D. All packaging must conform to MIL-STD-2073-1E using Method 31 preservation, D3 unit containers, and E-A wrap material, and all marking must adhere to MIL-STD-129 with no special markings required. Delivery is FOB origin, with a required delivery timeline of 168 days, and inspection and acceptance occur at destination. The unit of issue is each, with a fixed quantity of 10 units priced at $10.00 each for a total of $100.00 and no variance allowed. The contract mandates compliance with hazardous materials handling procedures per IP025 and prohibits mercury in any preservation or packaging components under IP056. The designated delivery point is DLA Distribution Warner Robins at Robins Air Force Base, Georgia, and transportation guidelines are referenced in DLAD Proc Notes C19 and C20. The original required delivery date is October 7, 2026, with a need-by date of January 19, 2027. The contract falls under NAICS code 334220 and is managed by the Department of Defense’s Active Devices Division, with Margaret Smith listed as the primary point of contact. Solicitation was posted on July 23, 2026, with responses due by August 3, 2026. All contractual obligations are governed by the DLA Master List revision in effect on the solicitation issue date, and any amendments supersede prior versions.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMALThe contract is for the procurement of a thermal resistor with NSN 5905-01-414-4341 and part number 406743078B, supplied by ABB Motors & Mechanical Inc, with a total quantity of 12 units at a unit price of $12.00, totaling $144.00. Delivery is required FOB origin within 168 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and packaging must conform to MIL-STD-2073-1E with specific preservation, wrapping, and container standards per QUP 001. Marking requirements follow MIL-STD-129 and include special code ZZ for additional specifications; additionally, each unit package must be marked per IPC/JEDEC J-STD-609 to indicate lead content and compliance with lead-free standards. Mercury and mercury-containing compounds are strictly prohibited unless explicitly allowed for functional components like batteries, lamps, or sensors, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier as per NAVSEA 5100-003D. The delivery address is DLA Distribution San Joaquin in Tracy, California, with a required ship date of January 19, 2027 and original delivery due by February 27, 2027. The contract is issued under solicitation SPE7M5-26-T-341C, with point of contact Jeanette Heisey, and is governed by DoD procurement regulations including unit of issue standards and transportation protocols outlined in DLAD proc notes C19 and C20.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILMThe contract specifies the procurement of a fixed film resistor with part number 5905014991408, sourced from Ohmite Holding, L.L.C., and governed by strict technical and packaging standards set by the Defense Logistics Agency. The item must comply with a source-controlled drawing and meet all technical and quality requirements referenced from the DLA Master List, with revisions controlled based on the solicitation or award date. The resistor must be marked in accordance with MIL-STD-129 and IPC/JEDEC J-STD-609, including specific lead finish标识 for Pb or Pb-free status on each unit pack, with placement strictly following the standard’s guidelines. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with each unit packed in E5 intermediate containers of 100 pieces, palletized per RP001, and labeled with special marking code ZZ for additional requirements. Delivery is required within 168 days to the DLA Distribution Depot Hill in Hill AFB, Utah, with no variance allowed in quantity and inspection and acceptance points set at destination. The item is designated as a critical application component, and only approved sources currently listed on the source-controlled drawing may fulfill the requirement, though future qualification is possible through direct contact with the cognizant design activity. The contract is issued under solicitation SPE7M5-26-T-346W with a response deadline of August 3, 2026, and an original delivery requirement of April 2, 2027, with a need ship date of January 19, 2027.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTRThe contract solicits 181 fixed electrolytic capacitors with NSN 5910-01-595-5161 under solicitation number SPE7M5-26-T-348G, issued by the Department of Defense’s Active Devices Division. The requirement is governed by DLA packaging and technical quality standards referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. All offerors must comply with DLA packaging requirements and include complete data packages for both the approved and alternate part, as no data is currently available. Physical identification and bare item marking must adhere to RQ017 specifications, and non-accepted supplies must have government identification removed per RQ011. The delivery schedule mandates fulfillment within 168 days after order, with the place of performance specified as New Cumberland, PA, 17070-5002. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and is categorized under NAICS code 334416 for electronic component manufacturing. Primary point of contact is Matthew Stanko, reachable via email and phone provided.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
MOTOR, CONTROLThis contract is for the procurement of motor control units under solicitation SPE7M5-26-T-343B, issued by the Department of Defense’s Active Devices Division as a Total Small Business Set-Aside. The item, identified by NSN 6105-00-942-2297 and part numbers from multiple qualified suppliers, requires 50 units to be delivered FOB origin within 40 days of contract award, with strict no variance in quantity. Delivery must be made to DLA Distribution Depot Hill at Hill AFB, Utah, following all DLA packaging directives, which mandate compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, and require palletization per RP001 standards. The DLA Master List of Technical and Quality Requirements overrides any conflicting specifications and governs all technical and quality criteria referenced by R or I numbers. Inspection and acceptance occur at the destination, and the unit of issue is each (EA) at a fixed price of $50 per unit, totaling $2,500. The contract includes specific transportation guidelines and mandates that all packaging and documentation meet exact DLA requirements, with a required ship date of September 13, 2026, and an original delivery deadline of January 9, 2027. The solicitation closed on August 3, 2026, with primary point of contact Corey Carter available for inquiries.
Relay and Industrial Control Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
GUIDE, VALVE STEMThe contract pertains to the procurement of two valve stem guides, identified by NSN 4820-01-272-0561 and part number 7V18D0E01-5, supplied by Newmans Inc New Jersey Div 61661. The item is to be delivered FOB origin within 137 days of the contract award, with no variance allowed in quantity—exactly two units must be furnished. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods such as air evaporation drying and use of FA wrap material, with all units contained in D3 unit containers and E5 intermediate containers. Marking must follow MIL-STD-129 without any special codes, and palletization adheres to DLA packaging requirements. Delivery is directed to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, and transportation is governed by DLAD procedural notes C19 and C20. The contract prohibits the intentional introduction of mercury or mercury-containing compounds into the product, with limited exceptions for functional uses in batteries, instruments, or chemical reagents, and mandates a secondary containment barrier for any portable devices containing mercury as per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the version effective on the solicitation issue date controlling. The solicitation number is SPE7M5-26-T-351F, with a response deadline of August 3, 2026, and the primary point of contact is Daniel Zimmerman at the Department of Defense’s Active Devices Division.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details