Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Connector Receptacle Supply

Active

Federal

Response Deadline10/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense Active Devices Division involves the supply of connector receptacles for prime contractors fulfilling DLA supply contracts. The provider is responsible for manufacturing or sourcing hardware that adheres to strict technical specifications, including full compliance with the Buy American Act and the Berry Amendment. Performance of this contract requires the use of precision manufacturing equipment and strict adherence to NIST SP 800-171 cybersecurity standards. The contract is categorized under NAICS code 334417 and specifies the place of performance at Tinker AFB, Oklahoma. Interested parties must respond by October 5, 2026, following the posting date of September 23, 2026. The final deliverable consists of physical connector receptacles delivered to the designated destination.

General Info

DoD subcontract for connector receptacles at Tinker AFB, due by October 5, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-26-T-520H.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONNECTOR, RECEPTACLE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineOct 5

Submission deadline

Response Deadline

10/05/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies connector receptacles for prime contractors delivering DLA supply contracts. Manufactures or sources hardware to meet technical specifications, ensuring compliance with the Buy American Act and the Berry Amendment. Requires precision manufacturing equipment and NIST SP 800-171 cybersecurity compliance. Delivers physical connector receptacles to the designated destination.

Similar Contracts

Same NAICS industry code

Supply of TE Connectivity Electronic ComponentsThis subcontract with the Department of Defense Maritime Supply Chain ESOC Buys involves the procurement and delivery of TE Connectivity electronic components, specifically part number 776427-1, to support prime contractors for DLA Land and Maritime supply contracts. The performance of this contract takes place in Albany, Georgia, under NAICS code 334417. The supplier must ensure strict adherence to technical and quality requirements outlined in RA001, as well as physical identification standards in RQ017 and government identification removal per RQ011. Additionally, the provider is required to comply with the Buy American and Balance of Payments Program standards to ensure all regulatory and quality benchmarks are met during the delivery process.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

Electronic Component Supply (NSN 7018446141)This subcontract involves the supply of two electronic components identified by NSN 7018446141 for prime contractors supporting Defense Logistics Agency hardware contracts. The provider is responsible for manufacturing or sourcing the end-items according to strict technical specifications and must provide Safety Data Sheets for any hazardous materials involved. Performance will take place at Hill AFB, zip code 84056-5713, under the authority of the Department of Defense Maritime Supply Chain ESOC Buys. The contract falls under NAICS code 334417 and requires strict adherence to the Buy American and Balance of Payments Program requirements. Interested parties must respond by the deadline of October 5, 2026, following the solicitation posted on September 23, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

Supply of Electrical Receptacle Connector (NSN 5935-01-487-3558)This subcontract involves the procurement of a single specialized electrical receptacle connector, identified by NSN 5935-01-487-3558, for prime contractors working on Active Devices Division projects under the Department of Defense. The selected provider is responsible for sourcing or manufacturing the component and ensuring all deliveries are accompanied by Safety Data Sheets that comply with 29 CFR 1910.1200(g) and Federal Standard No. 313 per FAR 52.223-3 for hazardous materials. The opportunity was posted on September 23, 2026, with a response deadline of October 5, 2026. Classified under NAICS code 334417, the contract specifies the place of performance as FPO 96672.

ACTIVE DEVICES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Electronic Component (NSN 7018420911)This subcontract involves the supply of a specific electronic component, part number 7018420911, to support prime contractors fulfilling DLA supply contracts for the Department of Defense Maritime Supply Chain ESOC Buys. The provider is responsible for manufacturing or sourcing the component to meet all technical specifications associated with the National Stock Number, including strict adherence to MIL-STD-129 for marking. The contract is for the delivery of one unit with shipping managed as FOB Origin. Performance is centered in Pascagoula, Mississippi, under NAICS code 334417. The solicitation was posted on September 23, 2026, with a response deadline of October 5, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

CONNECTOR, RECEPTACLE

Solicitation # SPE7M5-26-T-520H

Solicitation SPE7M5-26-T-520H is a Request for Quotations issued by the DLA Land and Maritime Active Devices Division for the procurement of receptacle connectors, specifically NSN 5935-01-587-0980. The requirement consists of two line items totaling 190 units, with 92 units destined for DLA Distribution Depot Oklahoma at Tinker AFB and 98 units for DLA Distribution Warner Robins. The items must comply with technical specifications MIL-DTL-38999N and MIL-DTL-38999/26G and are identified as qualified items under the Qualified Products List for Federal Stock Class 5935. Delivery is required within 56 days after receipt of order, with a need ship date of December 1, 2026, and a final required delivery date of December 13, 2026. Shipping is designated as FOB Origin, and inspection and acceptance will occur at the destination. The contract incorporates stringent packaging and marking standards, including MIL-STD-129 and DLA packaging requirement RP001. All quotes must be submitted via the DIBBS system by October 5, 2026. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The procurement falls under NAICS code 334417 and includes various FAR and DFARS clauses regarding the combating of trafficking in persons, hazardous material identification, and the safeguarding of covered defense information.

ACTIVE DEVICES DIVISION

POSTED

about 9 hours ago

DEADLINE

BACKSHELL, ELECTRICAL C

Solicitation # SPE7M0-26-T-098E

This contract is for the procurement of two electrical connector backshells, specifically Glenair part number 440FS075M1606-2B, under NSN 5935-01-681-7726. The order is managed by the Department of Defense through the Maritime Supply Chain ESOC Buys agency. Delivery is required within five days after receipt of the order, with a final required delivery date of September 23, 2026. The shipment is to be delivered FOB Origin to the DLA Distribution Depot at Hill AFB, Utah, using the fastest traceable means. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as MIL-STD-129 and RP001. It explicitly prohibits the use of Class I ozone-depleting chemicals in the manufacturing or delivery of the items. Inspection and acceptance will take place at the destination. The contract specifies a zero percent quantity variance, meaning the exact quantity of two units must be supplied.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

CONNECTION, 8 RELAY

Solicitation # SPE7M0-26-T-098Q

Solicitation SPE7M0-26-T-098Q is a request for quotations issued by the DLA Land and Maritime Maritime Supply Chain ESOC Buys for one unit of a Connection, 8 Relay, identified by NSN 5935-01-727-9985 and Woodward Inc. part number 1249-1331. The procurement falls under NAICS code 334417, with a required delivery date of September 18, 2026, and a delivery window of five days after receipt of order. The item is to be delivered FOB Origin, with inspection and acceptance occurring at the destination. Shipping is directed to the PCU Bougainville (LHA 8) in Mississippi, with specific instructions to use the fastest traceable means and avoid parcel post. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 for marking and RP001 for palletization. It incorporates various Federal Acquisition Regulation clauses, including those for combating trafficking in persons, sustainable products, and the Buy American and Balance of Payments Program. Invoicing and receiving reports must be processed electronically via Wide Area WorkFlow. Offerors are required to submit their quotes through the DIBBS system by the deadline of October 5, 2026, and must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

BACKSHELL, ELECTRICAL C

Solicitation # SPE7M0-26-T-098G

Solicitation SPE7M0-26-T-098G is a Request for Quotations issued by the DLA Land and Maritime Maritime Supply Chain ESOC Buys for the procurement of electrical connector backshells, specifically Glenair Inc. part number 440FS075M1406-2B under NSN 5935-01-681-5355. The requirement is split across two purchase requests, totaling six units, with the first request for four units and the second for two units. The original required delivery date is September 23, 2026, with a delivery window of five days after receipt of order. Shipping is FOB Origin, while inspection and acceptance are conducted at the destination, specifically at the DLA Distribution Depot Hill at Hill AFB, Utah. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must be commercially packaged per ASTM D3951, while hazardous materials must follow FED-STD-313 and TQ requirement IP025. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American and Balance of Payments Program, safeguarding of covered defense information, and combating trafficking in persons. All quotes must be submitted electronically via the DIBBS portal by the response deadline of October 5, 2026, and payment processing is required through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

BACKSHELL, ELECTRICAL C

Solicitation # SPE7M0-26-T-098D

Solicitation SPE7M0-26-T-098D is a Request for Quotations issued by the DLA Land and Maritime Maritime Supply Chain ESOC Buys for the procurement of electrical connector backshells. The requirement consists of two line items, each for a quantity of two units of Glenair, Inc. part number 440FS075M1405-2B (NSN 5935-01-681-5263). The original required delivery date is September 23, 2026, with a delivery timeframe of five days after receipt of order. Shipping is FOB Origin, and both inspection and acceptance will occur at the destination, specifically Hill AFB, Utah. The procurement is categorized under NAICS code 334417 and requires compliance with various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Packaging must adhere to MIL-STD-129 for marking and RP001 for palletization. Non-hazardous materials must be commercially packaged per ASTM D3951, while hazardous materials must follow TQ requirement IP025 and FED-STD-313. All quotes must be submitted via the DIBBS system, and the contractor is required to use the Wide Area WorkFlow system for electronic invoicing and payment processing.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M5-26-T-520A

ACTIVE DEVICES DIVISION

POSTED

about 9 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M0-26-T-098P

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M0-26-T-098R

Solicitation SPE7M0-26-T-098R is a request for quotations issued by DLA Land and Maritime for the procurement of one electrical plug connector, specifically TE Connectivity Corporation part number 776427-1, under NSN 5935-01-692-8120. The requirement is categorized under NAICS code 334417. The original required delivery date is September 22, 2026, with a delivery timeframe of five days after receipt of order. Shipping is designated as FOB Origin, and the items are to be delivered to the Distribution Management Office at MCLB in Albany, Georgia. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract incorporates several technical and quality requirements, including the DLA Master List, MIL-STD-129 for marking and labeling, and RP001 for palletization. Packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The solicitation includes various federal and defense clauses, such as the Buy American and Balance of Payments Program, safeguarding of covered defense information per DFARS 252.204-7012, and a prohibition on items produced via additive manufacturing. Quotes must be submitted through the DIBBS system by October 5, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Supply of Schneider Electric Circuit BreakersThis subcontract involves the procurement of 10 Schneider Electric circuit breaker units, part number QOB115VH, to support prime contractors on projects for the NSWC Philadelphia Division. The selected provider is responsible for sourcing the components and ensuring all packaging and palletization strictly adhere to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement. The contract is managed by the Active Devices Division of the Department of Defense under NAICS code 423610. All units are to be delivered to the NSWC Philadelphia Division located in Philadelphia, Pennsylvania. The solicitation was posted on September 23, 2026, with a response deadline of October 5, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and HazMat Shipping ServicesThis subcontract for the Department of Defense Active Devices Division involves providing specialized military packaging, marking, and shipping services for prime contractors. The contractor is responsible for ensuring all shipments are fully compliant and ready for FOB Origin delivery, adhering to strict standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. A critical component of the requirement is the application of hazard warning labels in accordance with DFARS 252.223-7001 and 29 CFR 1910.1200, which necessitates the use of certified HazMat shipping personnel. The work is to be performed in Mechanicsburg, Pennsylvania, with a response deadline of October 5, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Filter Subassembly Fabrication and SupplyThis subcontract involves the fabrication and supply of a completed Filter Subassembly for prime contractors working on Department of Defense projects under the Active Devices Division. The manufacturer must produce the subassembly according to NSN 5915016574723 and the DLA Master List of Technical and Quality Requirements, with a specific prohibition against the use of additive manufacturing. The contractor is responsible for performing all quality control and inspection necessary to meet destination acceptance points and must strictly adhere to MIL-STD-129 and MIL-STD-2073-1E for packaging and marking. The final deliverable is one packaged and marked Filter Subassembly to be performed in Mechanicsburg.

Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supplier of Electromagnetic Relays (NSN 5945-00-768-7083)This subcontract involves the supply of 43 electromagnetic relays for prime contractors supporting the Department of Defense Active Devices Division. The supplier is responsible for manufacturing or sourcing components that strictly adhere to Drawing 7700026 Rev G and NSN 5945-00-768-7083. All deliverables must comply with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, including specific unit package markings for component lead finish. The performance of this contract is based in New Cumberland, Pennsylvania, under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

Defense Electronics Packaging and Marking SpecialistThe Defense Electronics Packaging and Marking Specialist subcontract involves providing specialized packaging and marking services for prime contractors on Defense Logistics Agency electronics contracts. The scope of work includes applying unit package markings according to IPC/JEDEC J-STD-609 and MIL-STD-129 standards, as well as utilizing DOD qualified ESD and EMI materials per MIL-PRF-81705 and cushioning per A-A-59136 to protect microcircuits from electrostatic discharge and electromagnetic interference. This opportunity is issued by the Department of Defense under the Active Devices Division and is categorized under NAICS code 339999. The place of performance is located in Columbus, Ohio. The solicitation was posted on September 23, 2026, with a response deadline of October 8, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 9 hours ago

DEADLINE

Digital Microcircuit Supplier (NSN 5962-01-050-2777)This subcontract with the Active Devices Division of the Department of Defense involves the supply of three specialized digital microcircuits under NSN 5962-01-050-2777. The supplier must provide authentic components matching part numbers from Spectrum Microwave or BI Technologies, ensuring full traceability through required test reports and the completion of DLA Form 918 for the Counterfeit Detection and Avoidance Program. Compliance requirements include a CMMC Level 2 self-assessment and adherence to DFARS 252.204-7012 standards. The performance location is based in Columbus, Ohio, with a response deadline of October 8, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Electrical Plug Connectors (NSN 5935-01-344-0131)This subcontract involves the supply of four electrical plug connectors, identified by NSN 5935-01-344-0131, for prime contractors delivering to the DLA Land and Maritime agency. The selected provider must source or manufacture the components and ensure all packaging and palletization adhere to MIL-STD-2073-1E and RP001 standards, with markings applied according to MIL-STD-129. The contract is managed by the Active Devices Division of the Department of Defense, with performance taking place in FPO 96683. To facilitate invoicing through WAWF, the contractor is required to maintain an active CAGE code and SAM registration. The response deadline for this opportunity is October 5, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

Waveguide Assembly Fabrication and SupplyThis subcontract involves the manufacture and supply of a precision Waveguide Assembly, identified by NSN 5985010609052, for the Department of Defense Active Devices Division. The contractor is responsible for fabricating the assembly according to Reference Drawing 97942 646R922, Revision J, and must successfully execute a Government First Article Test to validate performance. The work requires specialized precision metal fabrication equipment and Covered Defense Telecommunications representation to support prime contractors delivering DLA Aviation supply contracts. The project is categorized under NAICS code 334413 and will be performed in Fallon, Nevada. Interested parties must respond by October 5, 2026, to meet the requirements for delivering one completed assembly that passes all necessary testing protocols.

Semiconductor and Related Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

Hazardous/Non-Hazardous Materials Packaging and ShippingThis subcontract for the Department of Defense Active Devices Division involves providing specialized packaging and traceable shipping services for prime contractors on Defense Logistics Agency supply contracts. The scope of work includes the packaging of hazardous materials according to TQ IP025/FED-STD-313 and non-hazardous materials per ASTM D3951, with all markings adhering to MIL-STD-129 and palletization following RP001 standards. The contractor is responsible for utilizing industrial palletization and labeling equipment to prepare shipments for delivery via a traceable carrier. This opportunity falls under NAICS code 339943, with a response deadline of October 5, 2026.

Marking Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

Electrical Equipment/Component SupplierThis subcontract opportunity with the Department of Defense Active Devices Division involves the supply of electrical equipment and components for prime contractors on Defense Logistics Agency supply contracts. The selected provider must manufacture or source components that strictly adhere to RFQ technical specifications and Buy American Act requirements, ensuring all deliverables meet DLA technical standards through rigorous quality control. Key operational requirements include full compliance with NIST SP 800-171 cybersecurity standards for data protection. The contractor is responsible for the physical delivery of all electrical components to the designated destination. This opportunity falls under NAICS code 335313 and has a response deadline of October 5, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 9 hours ago

DEADLINE

Military-Standard Packaging and Palletization ServicesThe Military-Standard Packaging and Palletization Services subcontract, issued by the Department of Defense Active Devices Division, requires specialized packaging, marking, and palletization for prime contractors delivering DLA supply contracts. The selected provider must ensure First Destination Transportation compliance by executing marking according to MIL-STD-129 and palletization per RP001 DLA Packaging Requirements for Procurement, utilizing DLA-approved materials and compliant marking equipment. This opportunity is categorized under NAICS code 561910 and will be performed at Tinker AFB in Oklahoma. The solicitation was posted on September 23, 2026, with a response deadline of October 5, 2026.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS