Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Construction of 6 New Buildings

Active
SN000428_87288Canada

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Defence Construction Canada is procuring the construction of six pre-engineered buildings at the St-Jean Garrison in Quebec, under project number SN000428_87288, with an estimated value of $52.1 million. The contract requires the full scope of work including labour, materials, supervision, and equipment, with Substantial Completion mandated within 358 calendar days of contract award and full completion no later than 30 days after that milestone. The solicitation is conducted under the Canadian Free Trade Agreement, CETA, and WTO-GPA, ensuring compliance with international procurement standards while explicitly supporting Indigenous economic participation through an Indigenous Benefits Plan that promotes opportunities for Indigenous-owned and led businesses. There is no scheduled site visit, and all inquiries must be directed solely to the designated point of contact, Patrick Gbedo, to avoid disqualification. Bidding documents are accessible via MERX, subject to applicable fees, and tender results will be published on merx.com and the DCC website. DCC is committed to transparency in payment practices, publicly disclosing payments to prime contractors within the past 90 days for contracts exceeding $100,000 to assist subcontractors in anticipating payment timelines. The deadline for responses is July 17, 2026.

General Info

Six pre-engineered buildings at St-Jean Garrison for $52.1M, 358-day completion, Indigenous benefits, tender due July 17, 2026.

Agency

Government of Canada → Construction de Défense Canada - Région du QuébecView Agency

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Construction de Défense Canada - Région du Québec
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Construction de Défense Canada - Région du Québec
View Agency Profile
Office AddressN/A
Contacts
Patrick GbedoContracting Authority
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DEFENCE CONSTRUCTION CANADA (DCC) – Project No. SN000428_87288 – Construction of 6 New Buildings, St-Jean Garrison, QC The work includes, but is not necessarily limited to, the supply of labour, material, supervision, and equipment necessary for the construction of six pre-engineered buildings at the St-Jean Garrison site (QC). The resulting Contract will include an Indigenous Benefits Plan (IBP) that aims to provide opportunities for businesses owned and led by Indigenous People. Canada’s free trade agreements pose no impediment to the inclusion of measures for the benefit of Indigenous Peoples and/or businesses in a procurement. Refer to the Tender documents for details. You may consult the Indigenous Services Canada’s business directory, and/or Canadian Council for Indigenous Business’s directory as required. NOTE: There is no site visit scheduled for this opportunity. The estimated cost for this opportunity is in the range of $52,100,000. The Work must reach Substantial Completion no later than 358 calendar days after notification of contract award and must be completed no later than 30 calendar days after the date of Substantial Completion. This solicitation is being conducted in accordance with the requirements set out in the Canadian Free Trade Agreement (CFTA), Chapter Nineteen of the Canada-European Union Comprehensive Economic and Trade Agreement (CETA) and the World Trade Organization Agreement on Government Procurement (WTO-GPA). Questions regarding this solicitation are to be directed ONLY to the point of contact identified in this advertisement. Bidders who address their questions to anyone other than the point of contact during the solicitation period may, for that reason alone, be disqualified. Please note that the preliminary tender results for this project will be available on MERX. Bidders can obtain contract award results from the DCC website at https://www.dcc-cdc.gc.ca/industry/contract-activity. DCC now publicly discloses information on payments made to prime contractors so that subcontractors know when they can expect payment. Information on payments made in the past 90 days on construction contracts over $100,000, as well as further information regarding DCC’s prompt payment commitment, can be obtained from the DCC website at https://www.dcc-cdc.gc.ca/industry/contract-activity. Bidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.

Similar Contracts

NAICS: 236220
New
Federal
Northeastern Regional Multiple Award Construction Contract (NRMACC)The Northeastern Regional Multiple Award Construction Contract, or NRMACC, is a small business set-aside contract designed to deliver general construction services across NASA’s northeastern facilities, specifically the Glenn Research Center, Goddard Space Flight Center, and Langley Research Center. The contract will support a broad range of construction activities including structural, civil, mechanical, electrical, environmental, and architectural work, with specific tasks outlined in individual task orders issued under the contract. All work is intended to serve the infrastructure needs of these federally operated research centers, with performance locations to be determined per task order. This procurement is managed by the Glenn Research Center under the National Aeronautics and Space Administration, with all contracting opportunities reserved exclusively for small businesses as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code 236220 applies, categorizing it under commercial and institutional building construction. Point of contact for general inquiries is Christopher M. Colwell, while Robert E. Watts serves as the Small Business Specialist. The contract was forecasted for release on October 1, 2026, and details can be accessed through NASA’s official procurement forecast portal.
Glenn Research Center

POSTED

in 3 months

DEADLINE

N/A
View Details
NAICS: 236220
New
SLED
Checkpoint Security Grill Replacement - DBBThe Port of Seattle’s Aviation Project Management Group is seeking a contractor to fully design, permit, and construct the replacement of the Checkpoint 5 security grill, with all work required to meet TSA CRPG Section 3-5 standards. The scope encompasses a complete lifecycle of services including site assessment, preparation of detailed design drawings and specifications, submission for regulatory review and permit acquisition, removal and proper disposal of the existing grill, fabrication and installation of the new system, and seamless integration with existing structural, electrical, and security badge access infrastructure. The project demands strict adherence to operational constraints to minimize disruption to airport activities and requires close coordination with all relevant stakeholders to ensure compliance and continuity of security functions. The contract is classified under NAICS code 236220 for commercial and institutional building construction and is listed as a forecast opportunity posted on July 10, 2026. Primary point of contact for inquiries is Yanet Maldonado, with Collette Deardorff serving as the project manager. All project activities will be performed at the Port of Seattle, though specific location details are not provided in the data. The procurement follows a design-bid-build delivery method, and while no set-aside designation is specified, interested parties should prepare comprehensive proposals addressing all technical, logistical, and compliance requirements outlined in the scope.
Aviation Project Management Group

POSTED

about 4 hours ago

DEADLINE

N/A
View Details
NAICS: 236220
New
SLED
Rental Car Facility (RCF) Customer Service Building (CSB) Re-DemisingThe Port of Seattle’s Aviation Project Management Group is preparing to revise the Customer Service Building within the Rental Car Facility to support a new concession agreement and upcoming tenant construction beginning June 1, 2027. Key improvements include updating wayfinding signage to reflect new tenant layouts, constructing a new break room and flex space to enhance transit operations, and renovating existing restrooms in the Customer Service Building. Additionally, the project involves replacing outdated car wash equipment in the Quick Turn Around areas and installing new expansion joints on the fifth floor plaza areas to ensure structural integrity. Critical structural work is also planned to address cracking and repair post-tensioned cables throughout the building to meet safety and durability standards. These upgrades are designed to modernize infrastructure and align with operational needs under the forthcoming concession arrangement. The solicitation is forecasted with a NAICS code of 236220 for building construction, indicating the work will be executed under a construction contracting framework. While the solicitation number is not yet assigned, the posting date is July 10, 2026, and the primary point of contact is Angela Peterson with the Port of Seattle, reachable via email and phone. Julia Ruzon serves as the project manager and can be contacted for detailed inquiries. All work is to be performed at the Rental Car Facility in Seattle, with no set-aside type designated, suggesting this opportunity is open to all qualified contractors. The project reflects a strategic investment in facility readiness, ensuring the building can accommodate new tenants and maintain compliance with safety and operational performance requirements.
Aviation Project Management Group

POSTED

about 4 hours ago

DEADLINE

N/A
View Details
NAICS: 236220
New
SLED
NC Department of Natural and Cultural ResourcesThe North Carolina Department of Natural and Cultural Resources is soliciting bids for the construction of a new open-sided, pre-engineered wood shelter and an adjacent storage shed at the Reed Gold Mine in Midland, North Carolina. The shelter will be situated on a concrete pad with a newly installed sidewalk connecting to the existing sidewalk on site. The project includes the installation of water service to support the owner’s panning trough system and the provision of an electrical panel to accommodate future power requirements. All work must be completed in accordance with the drawings and specifications, ensuring a fully functional and integrated facility. The solicitation, numbered SCO-25-29437-01A, was posted on July 10, 2026, with responses due by July 27, 2026, and is managed by the State of NC - Construction Office under the North Carolina agency. The primary point of contact for the solicitation is Shahgol Mostashari.
State of NC - Construction Office

POSTED

about 5 hours ago

DEADLINE

in 17 days
View Details
NAICS: 236220
New
SLED
Winston-Salem State UniversityWinston-Salem State University is soliciting rebids for the renovation and expansion of the K.R. Williams Auditorium through Re-Bid Package 3A, previously listed as Package 4. This solicitation is restricted to prequalified contractors and aims to secure competitive bids for a major facility upgrade at the university’s campus in North Carolina. The rebid follows an earlier process and is issued under solicitation number 287-25069-PQB#3A-RB, with bids due by July 16, 2026, at 8:00 PM Eastern Time after being posted on July 10, 2026. The project falls under the jurisdiction of the UNC System Office Design/Construction, with the North Carolina state agency overseeing procurement and compliance. The physical work will be performed entirely in North Carolina, and all proposals must be submitted through the state’s electronic procurement portal. Cynthia Strader is the designated primary point of contact for inquiries and additional information regarding the project requirements.
Unc - System Office Design/construction

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details