Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTRACTOR FIRST ARTIC

Active
SPE7L7-26-Q-2111Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two box end assemblies for a gun, identified by NSN 0001S00000053, with a delivery requirement of 330 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item falls under Category I munitions and requires demilitarization in accordance with DoD guidelines. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by a third-party assessment organization. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance occur at the manufacturer’s origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Item Unique Identification is not required per the service customer’s request. Technical data associated with the item is subject to ITAR or EAR export controls; disclosure to foreign persons, including employees of foreign subsidiaries, is prohibited without prior authorization. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The solicitation number is SPE7L7-26-Q-2111, issued by DLA San Joaquin, with a response deadline of August 14, 2026, and the place of performance is Tracy, California, 95304-5000. The primary point of contact is Charles Duncan at the provided email and phone number.

General Info

Procure two box end assemblies for gun, 330-day delivery, CMMC Level 2, ITAR/EAR controlled, DLA Tracy, California.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7L7-26-Q-2111.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Charles Duncan
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOX END ASSEMBLY, GUN.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000053 Quantity: 2 EA Purchase Request: 7017696680QTY - See Solicitation Delivery: 330 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
Hose Assembly Supply and Delivery
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

N/A
View Details
NAICS: 332994
New
DIBBS
HANDLE, PUMP
Solicitation # SPE4A7-26-T-609P
The contract pertains to the procurement of 50 pump handles identified by NSN 5342008679546 under solicitation SPE4A7-26-T-609P, with delivery required within 33 days of shipment. The order is split into three line items totaling 50 units—7 units for delivery to Tinker AFB, Oklahoma; 10 units to Hill AFB, Utah; and 33 units to Robins AFB, Georgia—each with a unit price of $1.00, resulting in a total contract value of $50.00. All items must be packaged in accordance with ASTM D3951, marked and labeled per MIL-STD-129, and palletized in compliance with DLA Packaging Requirements RP001, with the Unit of Issue as EA and Quantity per Unit Pack as 1. The delivery point is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The required delivery date for all items is October 5, 2026, though each line item has a separate need ship date between May and December 2026. Packaging and shipping instructions, including freight and parcel post addresses, are specified for each location, and all requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes ASTM standards where applicable. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Jamiah Sutton as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROOVED
Solicitation # SPE4A6-26-T-11SY
The contract is for the procurement of seven grooved couplings and clamps, identified by NSN 5342010178437, with a unit price of $7.00 per item, resulting in a total contract value of $49.00. Delivery is required within 171 days from the contract date, with shipment terms FOB origin and no variance allowed in quantity; the full order of seven units must be delivered without deviation. Inspection and acceptance both occur at the point of origin, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container codes. Marking must adhere to MIL-STD-129 with no special marking requirements, and palletization must follow DLA’s RP001 packaging guidelines. Mercury and mercury compounds are explicitly prohibited in all preservation, packaging, and marking processes. The delivery destination is DLA Distribution at the New Cumberland facility in Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery deadline of July 5, 2027. Transportation instructions are governed by DLAD procedural notes C19 and C20, and the solicitation was issued under contract number SPE4A6-26-T-11SY with a response deadline of August 12, 2026. The procurement falls under NAICS code 332994 and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
FAIRLEAD, TUBULAR
Solicitation # SPE4A7-26-T-610P
The contract pertains to the procurement of two tubular fairleads, identified by NSN 5342-01-220-7044, under solicitation number SPE4A7-26-T-610P, with a delivery requirement of 171 days after order. All supplies must comply with the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered standards referenced in the official DLA repository. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively; unspecified attributes are treated as major. Commercial off-the-shelf items are accepted provided the agency has adequate commercial catalog data. The item is to be delivered to New Cumberland, Pennsylvania, with the Department of Defense as the procuring agency under NAICS code 332994. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and all applicable revisions to technical and quality standards are controlled by the solicitation issue date unless amended. Primary point of contact is Jamiah Sutton at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
STOP, DRAWER
Solicitation # SPE4A7-26-T-610W
This contract is a total small business set-aside under solicitation SPE4A7-26-T-610W for the procurement of 30 units of part number 575089 identified by NSN 5342012342741, designated as a critical application item and supplied by R F PRODUCTS, INC. (CAGE 58022). The delivery is required within 171 days of award with FOB origin terms, inspection and acceptance occurring at destination. Packaging and preservation must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including packaging code U, preservation method 10, and unit container D3, with all marking adhering to MIL-STD-129 and no special markings required. Palletization must also follow DLA standards, and the parcel post and freight shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits the intentional use of mercury or mercury-containing compounds in any hardware, supply, or packaging materials, except for specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemically specified reagents under NAVSEA 5100-003D, which must include secondary containment and be shockproof. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances expected unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. All technical and quality requirements referenced via R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The required delivery date is August 7, 2027, with a need ship date of January 31, 2027, and the solicitation closed on August 12, 2026, with Michael Johnson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
RACK, STORAGE, SMALL
Solicitation # SPE7L3-26-T-146L
The contract is for the procurement of four units of a small storage rack identified by NSN 1095-01-710-8626 and part number UWRM7U, with a unit price of $4.00 and a total value of $16.00. Delivery is required within 20 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and container codes. Marking must adhere to MIL-STD-129 with no special markings, and palletization must follow DLA packaging requirements. The goods are to be shipped via traceable means—parcel post is prohibited—to the designated government facility at Fort Carson, Colorado. The contractor is required to retain complete supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016 and must remove all government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE7L3-26-T-146L, issued on August 4, 2026, with a response deadline of August 17, 2026. The primary point of contact is Katelyn Young of the Department of Defense.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
DIBBS
LATCH, ASSEMBLY
Solicitation # SPE4A6-26-T-11SN
The contract specifies the procurement of a LATCH, ASSEMBLY with NSN 5342009614436 and part number H312-2 manufactured by HARTWELL CORPORATION, in a quantity of four units at a unit price of $4.00, for a total price of $16.00. Delivery is required FOB origin within 171 days from the contract date, with zero variance allowed in quantity, and the item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards, including ASTM D3951 and MIL-STD-129 for packaging and labeling. Sampling shall follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017 standards, and packaging must adhere to DLA Packaging Requirements for Procurement, including palletization and labeling in compliance with MIL-STD-129. Inspection and acceptance occur at the destination, and transportation details are governed by DLAD Proc Notes C19 and C20. The original required delivery date is April 28, 2027, with a needed ship date of January 31, 2027, under solicitation SPE4A6-26-T-11SN, with primary point of contact Emma Garrett at DLA.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
SUPPORT, CHUTE, AMMUN
Solicitation # SPE7L7-26-Q-2109
The contract covers the procurement of three military-grade components: a support chute for ammunition, an accelerator machine, and a belt feed slide pin, all sourced from FN HERSTAL S.A. and identified by specific NSNs and part numbers. Quantities are strictly fixed at ten and eight units respectively, with zero percent variance allowed, and delivery is mandated at the destination point under FOB destination terms, with delivery windows of 252 and 295 days after award. All items are classified as critical application items subject to stringent technical and quality standards referenced from the DLA Master List, and must comply with MIL-STD-2073-1E packaging, MIL-STD-129 marking, and DLA packaging requirements. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and government identification must be removed from non-accepted supplies. Each item is designated as a defense article subject to ITAR regulations, requiring exporter registration with the Directorate of Defense Trade Controls, and technical data associated with the belt feed slide pin is subject to export controls under ITAR and EAR, restricted to contractors with approved JCP certification and completed training. The accelerator machine is also subject to demilitarization requirements under Category I munitions. Packaging and shipping instructions direct delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Procurement Notes C19 and C20. All documentation, including pricing, will be completed upon award, and the contract solicitation number is SPE7L7-26-Q-2109, issued by the Department of Defense with Charles Duncan as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
PLATE, FRONT
Solicitation # SPE4A6-26-T-11UY
The contract pertains to the procurement of a Front Plate identified by part number E-171-824-1R and NSN 5342-01-257-0637, with a quantity of six units to be delivered FOB origin within 171 days of contract award. The item is designated as a critical application component and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which governs all specifications unless amended by the solicitation. Sampling procedures are mandated to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required in the sample lot unless otherwise stated, and verification levels are fixed at VII, IV, and II for critical, major, and minor attributes respectively. Mercury and mercury-containing compounds are strictly prohibited in the item itself, in preservation, packaging, and marking, with narrow exceptions for functional components such as batteries or sensors approved by NAVSEA. All packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must meet DLA’s packaging requirements. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The contract is a total small business set-aside under NAICS 332994, with a response deadline of August 12, 2026, and a required delivery date of February 25, 2027.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
BOLT, EXPANDABLE
Solicitation # SPE4A7-26-T-610Q
The contract is for 42 expandable bolts identified by NSN 5342011839533 and part number HS5389-7-31, with a unit price of $42.00 and a total value of $1,764.00. Delivery is required within 130 days to the DLA Distribution facility in New Cumberland, Pennsylvania, FOB origin, with no variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, utilizing packaging code U and no special marking. The item is classified as a critical application item and requires adherence to DLA procurement notes for supply chain traceability, component qualification via the HS5389QPL, and retention of documentation per DLA Directive C03. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling mandated to follow MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. Measuring and test equipment must meet RT001 standards, and the item carries no shelf life limitation. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under contract number SPE4A7-26-T-610Q, and the procurement falls under NAICS code 332994. The primary point of contact is Brandon Smith of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROO
Solicitation # SPE4A7-26-T-610L
This contract pertains to the procurement of a grooved coupling and clamp, identified by NSN 5342011892949 and part number 7M1076-150, with a total quantity of 24 units required. The item is classified as a source-controlled critical application component and must be manufactured and tested strictly in accordance with specification SPE4A7-26-T-610L, Section B. Only vendors with direct access to the limited rights data or verifiable traceability to approved sources—such as Grimes Aerospace Company, Voss Industries, Boeing, or Eaton Aeroquip—are eligible to quote. The item requires specialized casting or forging processes, and the government may lack the necessary tooling; suppliers must submit a Casting and Forging Assistance Request if sourcing support is needed. All units must be delivered FOB origin within 171 days, with a final delivery deadline of February 9, 2027, and are subject to zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with palletization aligned to DLA packaging requirements. Sampling and quality verification follow MIL-STD-1916 or an equivalent zero-based inspection plan, with critical attributes requiring a V7 verification level or AQL of 0.1. No shelf life applies, but documentation for source approval via a SAR package is mandatory for new suppliers. The contract references the DLA Master List of Technical and Quality Requirements, which supersedes all other standards, and all markings and labeling must conform to government specifications. The point of contact is Lexus Henry, and delivery must be directed to DLA Distribution Cherry Point in North Carolina.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
PIN, GROOVED, HEADLES
Solicitation # SPE4A6-26-T-11TB
The contract pertains to the procurement of 1,894 units of PIN, GROOVED, HEADLES, identified by NSN 5315010183841, under solicitation SPE4A6-26-T-11TB. Delivery is required within 171 days from the contract award, with a final need-by date of January 31, 2027, and an original required delivery date of March 28, 2027. The item is to be delivered FOB origin with zero tolerance for quantity variance, meaning exactly 1,894 units must be shipped. Inspection and acceptance both occur at the destination, which is the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply with ASTM D3951 unless superseded by DLA Master List requirements, and all packaging and labeling must adhere to MIL-STD-129. Unit packaging must reflect QUP 010, and palletization must follow RP001 DLA Packaging Requirements for Procurement. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The sole point of contact for inquiries is Samantha Hopkins of the ASC Commodities Division, Department of Defense, reachable via phone or email.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 335999
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-Q-0447
The contract pertains to the procurement of 86 electrical heating elements, nonimmersion type, identified by NSN 4520-01-391-8325, under solicitation SPE8E8-26-Q-0447, with a required delivery within 90 days of award. The procurement is managed by DLA Dist San Joaquin under the Department of Defense, with performance to occur in Tracy, California, 95304-5000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract incorporates DLA packaging requirements and affirms that covered defense information may apply. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment boundary in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The point of contact for inquiries is Jennifer Luczkowski, with email and phone provided, and responses are due by August 11, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335910
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L7-26-T-4560
The contract under solicitation number SPE7L7-26-T-4560 is for Production Lot Testing of an item with NSN 0001S00000062, quantity 449 units, to be delivered within 699 days after award. The work is performance under the Department of Defense through DLA San Joaquin, with the place of performance located in Tracy, California, 95304-5000. The solicitation was posted on August 4, 2026, with proposals due on August 17, 2026, and falls under NAICS code 335910 for other electrical equipment and component manufacturing. The contractor must conduct production lot testing and prepare a formal test report labeled clearly with the contract number and lot/item number, then present it to the Quality Assurance Representative for review. All shipments of PLT reports must be accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving reports, a copy of the contract or order, all applicable test reports showing actual results against specified tolerances, material and process certifications, operation and inspection method sheets, and drawings used in manufacturing the tested samples, with proper markings to restrict public disclosure and limit government use as required. Primary point of contact for inquiries is Molly Teegarden, reachable at 614-557-3110 or molly.teegarden@dla.mil.
Battery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE7MC-26-T-167D
The contract pertains to the procurement of two butterfly valves with part number 24JG56431X and NSN 4820-01-728-8390, supplied by Crane Co Valve Division. The valves are designated as a critical application item and must comply with strict material restrictions, including a complete prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier, as mandated by NAVSEA 5100-003D. The valves are to be delivered FOB origin within 140 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with special marking code 00-00 indicating no additional requirements. Palletization follows DLA’s RP001 packaging requirements. Delivery is directed to the designated receiving warehouse in Tracy, California, with a need ship date of January 5, 2027, and an original required delivery date of February 28, 2027. The contract was issued under solicitation SPE7MC-26-T-167D by DLA Dist San Joaquin, a Department of Defense agency, with the point of contact being Paula Mcclary.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332913
New
DIBBS
BUBBLER, DRINKING FOUNT
Solicitation # SPE8E8-26-T-4957
The contract is for the procurement of 120 units of a bubbling drinking fountain with part number 030774-006 and NSN 4510014733230, awarded under solicitation SPE8E8-26-T-4957 by the Defense Logistics Agency District San Joaquin. Delivery is required within 58 days of contract award, with all items to be shipped FOB origin and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific unit packaging, cushioning, and marking requirements, with no special marking codes applied. The item is classified as a critical application item and must adhere strictly to DLA packaging and technical requirements, including the prohibition of intentional use of mercury or mercury-containing compounds, except for specific exempted applications such as batteries, fluorescent lamps, and instrumentation meeting NAVSEA 5100-003D standards, which must include secondary containment. Delivery is to be made to the designated warehouse in Tracy, California, and transportation logistics follow DLA procedural notes C19 and C20. The contract specifies a zero variance on quantity, with a required delivery date of August 4, 2026, and solicitation responses due by August 17, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and source approval documentation must be submitted under RC001 for any non-conforming suppliers.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-167F
The contract specifies the procurement of five safety relief valves, identified by NSN 4820-01-521-3089 and part number P052935-00044, manufactured by TIMKEN GEARS & SERVICES INC. The item is designated as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and packaging guidelines, with palletization following DLA’s RP001 requirements. The contract requires delivery of all units FOB origin within 140 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery address is DLA Dist San Joaquin in Tracy, California, and the original required delivery date is January 15, 2027, with a need ship date of January 5, 2027. The solicitation, issued under contract number SPE7MC-26-T-167F, was posted on August 4, 2026, with responses due by August 17, 2026, and falls under NAICS code 332911. All shipments must follow DLA Transportation Procurement Notes C19 and C20, and the point of contact for the solicitation is Paula McClary, reachable via email and phone as provided.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333924
New
DIBBS
FILTER ELEMENT, REVE
Solicitation # SPE8E8-26-T-4955
The contract pertains to the procurement of 131 filter elements for reverse osmosis systems, identified by NSN 4610-01-589-8131, under purchase request 7017286982. Delivery is required within 67 days of award, with performance designated for Tracy, California, ZIP 95304-5000. The solicitation number is SPE8E8-26-T-4955, issued by the DLA San Joaquin under the Department of Defense, with a posted date of August 4, 2026, and a response deadline of August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. The NAICS code 333924 indicates the product category, and the contracting office is managed by Alexis Selby, reachable via email and phone. Government identification must be removed from non-accepted supplies as per RQ011, and all submissions must comply with the DLA packaging standards outlined in RP001.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 325612
New
DIBBS
POLISH, PLASTIC
Solicitation # SPE8E5-26-T-3766
This contract specifies the procurement of Polish, Plastic under solicitation SPE8E5-26-T-3766, with a required delivery of 115 cases to be shipped FOB origin within 82 days, targeting a need ship date of June 24, 2026, and an original delivery deadline of November 29, 2026. The item is identified by NSN 7930-01-669-3161 and is classified as a Type I, non-extendable shelf-life item with a 36-month expiration period, subject to strict packaging and marking requirements per MIL-STD-2073-1E and MIL-STD-129, including special labeling code 32 for shelf-life type. Packaging must comply with DLA’s established standards, using a U code, dry preservative method, and intermediate container D3, without cushioning or dunnage, and must be palletized according to DLA guidelines. The contract enforces zero variance in quantity delivery and mandates inspection and acceptance at the destination, with government identification removed from non-accepted items. Technical and quality requirements are incorporated by reference from the DLA Master List, and the item is subject to Covered Defense Information protocols. Delivery is directed to DLA Distribution San Joaquin in Tracy, CA, and transportation follows DLA procedural notes C19 and C20. The unit of issue is the case, with a total contract value of $115.00 per case, and all terms are governed by the DLA revision in effect at the solicitation date.
Polish and Other Sanitation Good Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7MC-26-T-166X
The contract specifies the procurement of a flow control valve for E/I winch hydraulic systems, with material requirements limited to aluminum or bronze. An exception is noted where the original equipment manufacturer has updated the part number to R431002638, which is now acceptable alongside the drawing-referenced part number P50493-0001. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item is subject to defense information controls under RD002 and must comply with DLA packaging standards under RP001. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the origin. Government identification must be removed from rejected supplies, and technical data associated with the valve is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without authorization. Access to controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and formal DLA approval. The NSN is 0001S00000053, with 74 units requested under purchase request 7017697083, delivery due in 499 days after award. The solicitation is issued under SPE7MC-26-T-166X as a total small business set-aside, with the contracting activity managed by DLA District San Joaquin, and responses due by August 17, 2026.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
ANALYZER-CHARGER, BA
Solicitation # SPE7L7-26-T-4561
The contract pertains to the procurement of 456 units of the 490PT+ Pulse Tech Digital Battery Analyzer Tester & Printer, identified by NSN 6130015109594 and part number 741X890, under solicitation SPE7L7-26-T-4561, awarded as a Total Small Business Set-Aside. Delivery is required FOB origin within 128 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination facility in Tracy, California. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting commercial standards, and must be marked, labeled, and packaged in accordance with MIL-STD-129 and RP001 packaging guidelines. Hazardous material provisions prohibit intentional addition of mercury or mercury-containing compounds unless exempted for specific functional components such as batteries or sensors, and portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must meet ASTM D3951 for non-hazardous items or FED-STD-313 TQ IP025 for hazardous materials. The unit of issue is each, with a total contract value based on a unit price for 456 units, and shipping must adhere to DLA transport procedures C19 and C20. The solicitation closed on August 17, 2026, with a required delivery date of April 15, 2027, and is managed by the Department of Defense through DLA Dist San Joaquin.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541612
New
DIBBS
NIST SP 800-171 Compliance Assessment & SPRS Reporting
Human Resources Consulting Services

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 326199
New
DIBBS
Supply of Decorative Laminated Plastic Sheets
All Other Plastics Product Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery LogisticsThe contract requires the transportation and delivery of packaged valves via sea freight from the origin to a designated Department of Defense destination under the DLA Dist San Joaquin, with a strict delivery deadline of 165 days. All shipments must adhere to military standards for packaging, handling, and documentation to ensure integrity and compliance throughout transit. The place of performance is specified as Tracy, California, with a ZIP code of 95304-5000, indicating the final delivery point or primary logistical hub for coordination. This is a subcontract under NAICS code 484220, which classifies it as water transportation of freight, emphasizing oceanic shipping as the required mode of transport. The solicitation was posted on August 3, 2026, with responses due by August 6, 2026, indicating a rapid turnaround for proposal submission. While no specific point of contact or set-aside details are provided, the contract is managed under the broader Department of Defense logistics framework and must fulfill all contractual obligations tied to defense supply chain requirements.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 2 days
View Details