Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTRACTOR FIRST ARTIC

Active
SPE4A6-26-T-12DZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of thermal insulation for special purposes, with specific technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, identifiable by R or I numbers. All deliveries must comply with DLA packaging standards and are subject to inspection and acceptance at the origin. Any non-accepted supplies must have all government identification removed prior to disposition. The item involves export-controlled technical data regulated under ITAR or EAR, restricting its dissemination to authorized entities only; contractors must hold valid JCP certification, complete mandatory DOD export control training, and receive explicit approval from DLA to access such data. The NSN 0001S00000053 is requested in a quantity of seven units, with a delivery deadline of 321 days after award. The solicitation number is SPE4A6-26-T-12DZ, issued on August 4, 2026, with responses due by August 12, 2026. The place of performance is Tracy, California, and the contract falls under NAICS code 336419, administered by the Department of Defense’s ASC Commodities Division.

General Info

Procure seven insulated units per DLA specs, meet ITAR/EAR controls, deliver to Tracy, CA by 321 days post-award.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336419 - Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12DZ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
INSULATION,THERMAL,
INSULATION, THERMAL, SPECIAL PURPOSE


RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD002, COVERED DEFENSE INFORMATION APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000053 Quantity: 7 EA Purchase Request: 7017740503QTY - See Solicitation Delivery: 321 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336419
New
DIBBS
HEATER, THERMAL RELEASE
Solicitation # SPE7M1-26-U-4880
The contract is for a heater, thermal release item identified by NSN 5999-00-504-9617 and partial numbers 9104H3926 and 167576 from DRS Naval Power Systems Inc and Northrop Grumman Systems Corporation respectively. It is a small business set-aside solicitation under contract number SPE7M1-26-U-4880 with a total quantity of 74 units at a unit price of $74.00, for a total value of $5,476. Delivery is required FOB origin within 118 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination point, and packaging must comply with MIL-STD-2073-1E using method 41 for preservation, with materials specified for wrapping and containment as defined. Marking must adhere to MIL-STD-129 with no special marking codes applied. The item is classified as a critical application and must not contain intentionally added mercury or mercury compounds, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date. The contract falls under a DLA Direct, CONUS coverage type and is part of the Department of Defense’s Maritime Supply Chain procurement efforts.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336419
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-12PR
The contract pertains to the procurement of a single unit of a piston shock isolator, upper component, identified by NSN/Part Number 0001S00000052, with a delivery deadline of 411 days after order. The solicitation is issued under SPE4A6-26-T-12PR by the Department of Defense’s ASC Commodities Division, with performance expected at Hill AFB, Utah. The item is subject to stringent compliance requirements, including a complete prohibition on the use of Class I ozone-depleting chemicals, superseding any conflicting specification but not waiving product performance standards; any substitute chemicals must be pre-approved unless explicitly authorized. Technical and quality requirements referenced by R or I codes are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, requiring prior authorization for any export, including disclosures to foreign nationals within the U.S., and limiting access only to contractors with approved JCP certification, completed DOD training, and DLA authorization. Packaging must adhere to DLA standards, and cybersecurity compliance requires CMMC Level 2 certification for third-party assessors. The contract is restricted to entities meeting all export control and data handling protocols, with primary contact information provided for inquiries and documentation.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336419
New
DIBBS
RAIL, LAUNCHER, GUIDE
Solicitation # SPE4A6-26-T-12PS
The contract solicitation SPE4A6-26-T-12PS seeks five units of RAIL, LAUNCHER, GUIDE with NSN 1440-01-309-4135 under a total small business set-aside, with a delivery deadline 481 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through an accredited third-party assessment organization, and packaging must adhere to DLA specifications. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Bare item marking is required for physical identification, though Item Unique Identification is not mandated per customer request. Technical data associated with this item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons regardless of location, and requires contractors to hold JCP certification, complete mandatory DOD export training, and receive DLA approval to access controlled data. The place of performance is New Cumberland, PA, with Briana McCarter as the primary point of contact, and the solicitation is issued under NAICS code 336419 by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336419
New
Federal
All Up Round plus Canister Simulator (AURCS)
Solicitation # 45-0268
The Naval Undersea Warfare Center Division Newport is seeking industry input through a Request for Information to assess capabilities for the future fabrication of the All Up Round plus Canister Simulator, a complex developmental system requiring advanced manufacturing, precision machining, and stringent welding standards. Respondents must demonstrate the capacity to handle large, heavy components with detailed facility infrastructure including lifting and assembly capabilities, along with proven expertise in large-scale precision machining and welding that meets strict military specifications. The future contract effort would involve producing a First Article Unit for validation through Manufacturing Readiness Review and Physical Configuration Audit, followed by recurring production of AURCS units and associated Peculiar Support Equipment, plus ongoing engineering change management and supply chain obsolescence mitigation. The government will provide the Technical Data Package and Statement of Work upon solicitation but currently seeks evidence of industry readiness through a white paper response no longer than ten pages, complemented by supporting visuals. Companies responding must provide a comprehensive company profile including CAGE code, UEI, size classification under NAICS 336419, and point of contact details, while explicitly addressing five key capability areas: facility infrastructure for handling heavy components, precision machining experience with tight tolerances on large assemblies, welding program certification and NDT inspection capabilities, ability to meet aggressive production schedules, and relevant past performance in naval or submarine-related fabrication projects. Two government contract references are required, and proprietary information must be clearly marked. All responses are due by August 14, 2026, submitted via email to designated Navy points of contact. Importantly, this RFI is not a solicitation, does not obligate the government to award a contract, and respondents bear all costs associated with their submission. Access to controlled attachments, including the draft Statement of Work and background slides, requires a SAM.gov role and formal request with justification, and all received information will be handled as Controlled Unclassified Information.
Nuwc Division Newport

POSTED

about 22 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-11LQ
The contract specifies the procurement of 25 units of a cable assembly identified by NSN 0001S00000061 under solicitation SPE4A6-26-T-11LQ, with a delivery requirement of 246 days after contract award. This is a total small business set-aside under NAICS code 336419, managed by the Department of Defense’s ASC Commodities Division. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, including packaging, inspection at origin, removal of government identification from non-accepted supplies, and physical marking of bare items. The cable assembly involves export-controlled technical data governed by ITAR or EAR, restricting access and disclosure to authorized entities only; recipients must hold a valid US/Canada Joint Certification Program status, complete mandatory DOD export control training, and obtain prior approval from DLA to handle such data. Cybersecurity compliance is mandated through CMMC Level 2 certification for third-party assessors, and DFARS 252.225-7048 applies to all controlled technical information. The point of contact is Sibel Claywell, and performance will occur in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336419
New
DIBBS
COVER, ACCESS, GUIDED
Solicitation # SPE4A6-26-T-87R9
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 336419
New
Federal
Flight Data Transmitter (FDT) Phase III
Solicitation # FA8128
The Elevon Actuator Controller Phase III contract, identified by solicitation number FA8128-26-D-B002, is a justification document issued by the Department of Defense through the Air Force Life Cycle Management Center at Tinker Air Force Base in Oklahoma. The contract is designated under NAICS code 336419, which corresponds to aircraft engine and engine parts manufacturing, indicating the technical nature of the deliverables related to advanced flight control systems. The primary point of contact is Natalie Stokely, reachable via email and phone, and the work is expected to be performed at Wright-Patterson Air Force Base in Ohio, reflecting a collaboration between development and operational testing facilities. Although the specific financial terms and technical specifications are redacted, the contract’s purpose is to advance the capability of elevon actuator controllers, likely supporting next-generation aerospace platforms. The solicitation was posted on July 8, 2026, and is classified as a justification rather than a competitive award, suggesting a sole-source or non-competitive procurement rationale has been formally documented.
FA8128 Afnwc Pzn

POSTED

5 days ago

DEADLINE

in 25 days
View Details
NAICS: 336419
New
DIBBS
Guided Loading Rack System Manufacturing & AssemblyThe contract requires the design, fabrication, integration, and testing of a guided loading rack system that must meet stringent military standards, encompassing all structural and mechanical components necessary for operational reliability in defense environments. The project demands full compliance with applicable military specifications, ensuring durability, precision, and safety under demanding conditions. This is a small business set-aside subcontract under NAICS code 336419, restricted exclusively to small businesses as defined by the SBA, and is being procured by the ASC Commodities Division of the Department of Defense. The work must be performed at the place of performance in Jacksonville, Florida, with a zip code of 32212-0103. Bids must be submitted by the response deadline of August 7, 2026, with the solicitation posted on July 30, 2026, providing a seven-day window for proposal preparation and submission. Any applicant must be prepared to demonstrate capability in end-to-end system development, from conceptual engineering through final testing, under a military contract framework.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 336419
New
DIBBS
REDUCER, PIPE
Solicitation # SPE7M3-26-T-7777
The contract is for the procurement of 12 reducer, pipe units under NSN 4730-01-482-9238 with a unit price of $12.000, resulting in a total contract value of $12.000. Delivery is required within 193 days from the solicitation issuance, with an original required delivery date of February 20, 2027, and all items must be delivered FOB origin to the specified destination at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. Inspection and acceptance occur at the destination point, and the contractor must comply with ASTM D3951 for packaging, with the DLA Master List of Technical and Quality Requirements taking precedence. All packaging and labeling must adhere to MIL-STD-129, including barcoding and unit of issue specifications, and palletization must meet RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited. The contract enforces electronic invoicing through Wide Area WorkFlow (WAWF), and compliance with multiple FAR and DFARS clauses is mandatory, including those governing equal opportunity, subcontracting, inspection, default, transportation by sea, hazardous materials labeling, cybersecurity safeguards, cybersecurity incident reporting, prohibition on covered telecommunications equipment, whistleblower rights, and safeguarding covered defense information per NIST SP 800-171. The solicitation number is SPE7M3-26-T-7777, issued July 30, 2026, with a response deadline of August 10, 2026, under simplified acquisition procedures using a firm-fixed-price structure. Offerors must provide a Unique Entity Identifier and CAGE code, affirm size status and socioeconomic certifications, and submit required representations, though no completed submissions are reflected in the provided data. The contracting officer’s representative contact is William Cain, and no options, modifications, or additional CLINs are included.
FLUID HANDLING DIVISION

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 336419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-11AB
This contract pertains to the procurement of a cable assembly with NSN 0001S00000061, specifying a quantity of 20 units to be delivered within 246 days after delivery order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the type of acquisition and applicable dates. Cybersecurity compliance is mandated at CMMC Level 2 through a certified third-party assessment organization. The item involves covered defense information subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign national employees and subsidiaries, with DFARS 252.225-7048 governing its handling. Access to technical data is restricted to contractors with JCP certification, completion of DOD export control training, and approval from DLA. Packaging must adhere to DLA standards, inspection occurs at origin, and non-accepted supplies must have government identification removed. The solicitation is a total small business set-aside under NAICS 336419, issued by the Department of Defense’s ASC Commodities Division, with responses due by August 7, 2026, and performance location in Tracy, California. Point of contact is Ashley Jones-Turner at DLA.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 3 days
View Details
NAICS: 336419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-10YY
The contract pertains to the procurement of a cable assembly identified by NSN/Part Number 0001S00000061, with a quantity of 35 units, under solicitation SPE4A6-26-T-10YY. Delivery is required within 246 days after award, and the solicitation was posted on July 30, 2026, with responses due by August 7, 2026. The item is subject to strict export control under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons, regardless of location, and mandates compliance with DFARS 252.225-7048. Only DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and authorized by DLA may access the controlled technical data. The contract incorporates mandatory technical and quality requirements from the DLA Master List, including packaging standards, origin inspection, removal of government identifiers from non-accepted supplies, and cybersecurity compliance under CMMC Level 2 for third-party assessors. Covered defense information applies, and performance is designated for New Cumberland, Pennsylvania, with Xavier Keyes of the ASC Commodities Division as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 336419
New
DIBBS
RACK, LOADING, GUIDED
Solicitation # SPE4A6-26-T-10UV
The contract involves the procurement of one guided loading rack system under NAICS code 336419, with delivery scheduled 377 days after order issuance to Jacksonville, Florida, at a specified delivery address. The item is subject to stringent technical and quality requirements referenced via the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, mandating zero non-conformances unless otherwise specified, and assigning acceptance quality levels of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively. Packaging must conform to MIL-STD-2073-1E and DLA’s RP001 requirements, using specified materials such as WRAP MAT:00 and CUSH/DUNN MAT:AD, with preservation requiring a clean and dry state and no preservation material. Marking and labeling must adhere to MIL-STD-129 for shipment, MIL-STD-130 for unique item identification, and 29 CFR 1910.1200 for hazardous materials, with physical identification of bare items required per RQ017. The item contains technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without authorization, and access is limited to contractors with JCP certification, completed export control training, and DLA approval. The solicitation is a total small business set-aside, with contract type TBD but requiring postaward small business representation under FAR 52.219-28. Payment will be processed via WAWF, with accelerated payments to small business subcontractors mandated. The contractor must comply with multiple FAR and DFARS clauses covering employment eligibility, anti-trafficking, sustainable products, hazardous materials, IUID, whistleblower rights, and cybersecurity compliance including NIST SP 800-171. Inspection and acceptance occur at destination by government personnel using specified quality standards, and the contract includes requirements for notification of radioactive materials exceeding 0.002 microcuries per gram. The estimated contract value is $85,000 for the single unit solicited, with a broader historical contract value of $263,620 based on related line items. All proposals must be submitted electronically via DIBBS by August 7, 2026, with inquiries directed to Xavier Keyes at DLA.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance and Technical Compliance SupportThe contract titled Quality Assurance and Technical Compliance Support encompasses a range of quality control, testing, and documentation services designed to ensure full adherence to military standards. This includes the preparation and management of Material Safety Data Sheets, detailed inspection reports, and comprehensive traceability systems to guarantee the integrity and compliance of all materials and processes. The work is critical to maintaining defense-grade quality and regulatory alignment across the supply chain, requiring strict procedural discipline and technical expertise. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA, with the NAICS code 541330 indicating its classification under engineering services. The solicitation is managed by the ASC Commodities Division within the Department of Defense and is open for response until August 19, 2026, with the original posting date of August 4, 2026. The place of performance and specific location details are not specified, but all deliverables must meet the rigorous technical and administrative requirements demanded by military specifications. Participation is restricted to small businesses qualifying under the SBA’s set-aside program.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Logistics and Worldwide Distribution SupportThe contract titled Logistics and Worldwide Distribution Support is a small business set-aside subcontract under the SBA program, assigned the NAICS code 493190 for warehousing and storage, and issued by the ASC Commodities Division within the Department of Defense. It requires comprehensive global coordination of shipping, storage, and order fulfillment for cable assemblies, ensuring timely delivery to DLA depots while maintaining strict federal logistics compliance. The contractor must manage inventory levels, track shipments across international borders, and adhere to all military supply chain protocols, including documentation, reporting, and regulatory standards for defense-related materials. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and the performance location spans worldwide, with no specific city or state designated. The work demands end-to-end supply chain visibility, reliable logistics infrastructure, and proven experience in supporting federal defense operations. Only small businesses are eligible to bid, and the successful vendor will be responsible for end-to-end execution from warehouse receipt to depot delivery, with an emphasis on operational precision, accountability, and adherence to defense logistics requirements.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
DIBBS
Ribbon Cable Assembly ManufacturingThe contract seeks the manufacture and delivery of ribbon electrical cable assemblies identified by NSN 6150-01-546-7708 and part number 30-275-24H18CA, which must fully comply with applicable military specifications and DLA depot standards. The work is a subcontract under a total small business set-aside as defined by FAR 19.5, exclusively available to small business concerns certified under the SBA program. The NAICS code 334419 applies, indicating the scope involves other electronic component manufacturing, and the solicitation is administered by the ASC Commodities Division within the Department of Defense. All deliverables must meet stringent quality and performance requirements to ensure operational reliability in military applications. The solicitation was posted on August 4, 2026, with a firm response deadline of August 19, 2026. The place of performance is not specified, but the product must be delivered to meet DLA depot logistics requirements, implying compliance with military receipt, inspection, and distribution protocols. The contract is accessible via the DIBBS portal at the provided link, and all proposers are expected to adhere to federal procurement guidelines, including submission of technical, compliance, and small business certification documentation. No point of contact is listed, suggesting all inquiries must be processed through the standard DIBBS mechanisms.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Specialty Packaging and Marking CorrectionThe contract titled Specialty Packaging and Marking Correction mandates the repackaging or relabeling of gages that do not comply with military packaging and labeling standards set forth by the Department of Defense. This includes correcting any discrepancies in National Stock Number labeling, CAGE code information, and barcode formatting to ensure full alignment with DoD requirements. The work must be performed to precise specifications to guarantee traceability, compliance, and readiness for military use. This is a small business set-aside subcontract under the SBA’s Total Small Business Set-Aside program, categorized under NAICS code 561910, which pertains to other support activities for agriculture and mining. The opportunity was posted on August 4, 2026, with responses due by August 18, 2026. The contracting activity is managed by the ASC Commodities Division under the Department of Defense, and performance will occur at locations designated by the government. Potential offerors must be certified small businesses eligible for the set-aside and prepared to meet all technical and regulatory demands associated with military-grade packaging and marking correction.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541380
New
DIBBS
Calibration and Testing Services for Critical Application ItemsThe contract outlines services for the independent calibration, functional testing, and certification of pressure gages to meet rigorous military performance standards, ensuring all equipment is traceably validated before delivery. These activities are critical to maintaining the integrity and reliability of components used in defense applications, with all work requiring adherence to specified technical requirements and documentation protocols to guarantee compliance. The services must be performed by qualified entities capable of delivering precise, auditable results that support mission-critical operations. This is a total small business set-aside subcontract under NAICS code 541380, designated for small businesses and managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and is available through the DIBBS platform. Performance location and point of contact details are not specified, but the scope emphasizes nationwide delivery of certified pressure gages meeting DoD quality assurance benchmarks. All contractors must demonstrate capability in handling sensitive calibration and testing procedures aligned with federal military specifications.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
Precision Pressure Gage ManufacturingThe contract pertains to the manufacture and delivery of a precision pressure dial indicating gage, identified by NSN 6685-01-165-8961, built to meet strict military specifications. The required unit is modeled after P/N 11006 from 3D Instruments, LLC DBA Sierra, an approved supplier, ensuring compliance with performance, durability, and accuracy standards mandated for military applications. This is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses certified by the SBA, with the NAICS code 334519 indicating classification under Other Instrument Manufacturing. The procurement is managed by the ASC Commodities Division under the Department of Defense, with a response deadline of August 18, 2026, and the solicitation posted on August 4, 2026. Delivery locations and point of contact details are not specified in the provided data, but performance is expected to align with defense logistics requirements.
Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Defense Telecommunications Equipment ScreeningThe contract seeks technical review and certification services to ensure that telecommunications equipment supplied under the agreement complies with DFARS 252.204-7016 and Section 889 of the National Defense Authorization Act, which prohibit the use of equipment from foreign adversaries. The vendor must verify that all telecommunications products do not originate from or contain components sourced from entities designated as covered foreign adversaries, such as Huawei, ZTE, and other specified organizations, to safeguard national security interests. Compliance requires thorough documentation, supply chain tracing, and formal attestation confirming adherence to federal regulations governing the procurement of secure telecommunications infrastructure. The subcontract is issued by the ASC Commodities Division under the Department of Defense with a NAICS code of 541330, indicating it pertains to other scientific and technical consulting services. The opportunity was posted on August 4, 2026, and responses are due by August 19, 2026. The place of performance and specific agency location are not detailed, but the work is expected to support defense-related telecommunications systems. All proposers must demonstrate capability to conduct rigorous technical evaluations and provide legally defensible certification statements. The contract is open for bidding through the DIBBS platform and does not include any set-aside provisions for specific business categories.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Compliance & Representations Management (Supplier Onboarding Support)The contract supports the prime contractor in ensuring supplier compliance with federal regulations, focusing on key administrative and regulatory obligations such as SAM representations, annual certifications, and adherence to FAR and DFARS clauses. It involves managing the supplier onboarding process to verify that all subcontractors and vendors meet federal requirements prior to engagement, reducing compliance risk and maintaining eligibility for DoD contracts. The scope includes ongoing monitoring and documentation of supplier representations to ensure continuous compliance throughout the contractual relationship. This subcontract is issued by the ASC Commodities Division within the Department of Defense under NAICS code 541611 for administrative management services. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and the place of performance is not specified, indicating potential nationwide or virtual performance. The work is not subject to a specific set-aside designation, and while the point of contact information is not provided, the official solicitation can be accessed through the DIBBS system using the provided link.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423690
New
DIBBS
Small Business Subcontracting Support (Flow-Down Requirement)The contract outlines participation as a small business subcontractor under a flow-down requirement to provide commercial products or services to the Department of Defense, specifically under the ASC Commodities Division. It mandates adherence to all applicable Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, ensuring compliance with federal subcontracting standards. Accelerated payment terms are included to support small business cash flow, reinforcing the government’s commitment to timely compensation for subcontractors meeting contractual obligations. The solicitation is posted under NAICS code 423690, which pertains to other miscellaneous durable goods merchant wholesalers, indicating the nature of the commercial goods or services involved. The response deadline is August 19, 2026, with the opportunity posted on August 4, 2026, and is structured exclusively as a subcontracting opportunity without a specified set-aside classification. Performance location details are unspecified, but the contract is administered through the Defense Logistics Agency’s DIBBS platform, where all documentation and submissions must be accessed and completed via the provided online portal.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423490
New
DIBBS
Supply of Part-Numbered Commercial Items (CAGE Code-Based Procurement)The contract mandates the supply of specific commercial items identified by unique part numbers and CAGE codes, requiring full compliance with detailed technical and logistical specifications. This includes proper packaging, handling, and delivery protocols to ensure items meet all quality and readiness standards outlined in the procurement requirements. The items are intended for use under the Department of Defense through the ASC Commodities Division, with performance expected to align with defense-grade logistical workflows. Subcontractors must respond by the deadline of August 19, 2026, with bids submitted through the designated DIBBS portal. The North American Industry Classification System code 423490 indicates this involves merchant wholesalers of hardware, plumbing, and heating equipment, suggesting the items are standard commercial components utilized in military applications. There is no set-aside designation, meaning all eligible contractors may compete, and performance location details are not specified, implying flexibility in delivery logistics as long as contract terms are met.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)The contract pertains to the manufacture or supply of standardized fasteners identified by NSN 5307-01-212-4400, specifically for integration into defense systems. As a commercial item procurement, it mandates strict adherence to military specifications and federal supply chain standards to ensure compatibility, reliability, and interoperability within military equipment. The item falls under NAICS code 332312, classifying it as a manufacturing activity related to screw, bolt, and fastener production, and is being procured under a subcontract mechanism by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, providing vendors with a two-week window to submit proposals. While no specific place of performance or point of contact is detailed, the procurement is governed by the Defense Logistics Agency’s procurement framework, as indicated by the official DIBBS portal link. All suppliers must meet the defense sector’s quality, documentation, and delivery requirements without any set-aside provisions for small or disadvantaged businesses, emphasizing a competitive, open-market approach aligned with DoD supply chain objectives.
Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334332
New
DIBBS
Cable Assembly Manufacturing and Supply (NSN 5995-01-657-9352)The contract involves the manufacture and supply of the cable assembly identified as RADI RA001 with part number 09-2830203-1 and NSN 5995-01-657-9352 to support delivery requirements for DLA depots under a firm-fixed-price structure with a five-year base period. The work is being procured as a subcontract by the ASC Commodities Division, a component of the Department of Defense, under NAICS code 334332 which pertains to communications equipment manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and is accessible via the DIBBS portal. Performance will be conducted in support of defense logistics operations, though specific delivery locations and point of contact details are not provided. The fixed pricing framework establishes clear financial terms while requiring consistent adherence to quality, schedule, and volume commitments over the contract term.

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details