Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTRACTOR FIRST ARTIC

Active
SPE7L1-26-T-945TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of 50 units of a firearm component identified by NSN/Part Number 0001S00000053 under solicitation SPE7L1-26-T-945T, with a delivery deadline of 300 days after contract award. The item is subject to stringent technical, quality, and compliance requirements under the DLA Master List of Technical and Quality Requirements, including configuration control via engineering change proposals and variance requests. The supplier must meet tailored quality standards applicable to both manufacturers and non-manufacturers and comply with inspection and acceptance procedures conducted at origin. Components must be sourced from qualified products or manufacturers listed on approved QPLs or QMLs, and the supplier must adhere to DLA packaging specifications. The item is classified as a Category I munition, requiring compliance with militarization protocols and the removal of government identification from non-accepted items. The contract imposes strict controls on technical data, classifying it as subject to ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location. Only DLA contractors with JCP certification, completed export control training, and official DLA authorization may access this data. The use of ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The supplier must also maintain CMMC Level 2 certification as a C3PAO and hold phosphate coating supplier certification. All work must comply with the technical and quality provisions referenced in the DLA Master List, with revisions determined by the solicitation issue date. The point of contact for inquiries is Miguel Acevedo, and performance is to occur in New Cumberland, PA.

General Info

Procurement of 50 firearm components under ITAR/EAR, requiring DLA compliance, CMMC Level 2, QPL sourcing, and New Cumberland delivery.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-945T Request for Quotations DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
MIGUEL ACEVEDO
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FOLLOWER,WEAPON
BREECH MECHANISM
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ036Phosphate Coating Supplier Certification Requirements
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RT001: MEASURING AND TEST EQUIPMENT
SPE7L1-26-T-945T
SECTION B
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000053 Quantity: 50 EA Purchase Request: 7017780828QTY - See Solicitation Delivery: 300 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
ROD ASSY
Solicitation # SPE4A7-26-T-632L
The contract concerns the supply of a ROD ASSY item identified by part number 123LM10192-1 and NSN 5342001610529, with a quantity of three units to be delivered FOB origin within 166 days, targeting a delivery date of January 31, 2027. The item is classified as a commercial item and a critical application item, subject to stringent quality and cybersecurity requirements including CMMC Level 2 self-assessment and adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Physical identification and bare item marking must follow RQ017 and MIL-STD-129 specifications, with no special marking required. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, using prescribed methods for preservation, wrapping, and containment as detailed in the QUP and packing code U. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and acceptance occurs at origin with no variance permitted in quantity. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, for both parcel post and freight shipping. The unit price is $3.00, resulting in a total contract value of $9.00. The item has no shelf life restriction. The solicitation number SPE4A7-26-T-632L was issued on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 332994, and the contracting office is the ASC Supplier Oper AE and AF Division under the Department of Defense. The point of contact is Jessica Gentry, reachable via phone and email. All requirements are governed by DoD standards, and transportation logistics must align with DLAD Proc Notes C19 and C20. The item must be delivered by manufacturers or non-manufacturers who meet tailored higher-level quality requirements and comply with inspection and acceptance provisions at the point of origin.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
SUPPORT, CHUTE, AMMUNITI
Solicitation # SPE7L3-26-T-169C
The contract solicitation SPE7L3-26-T-169C requests 21 units of SUPPORT, CHUTE, AMMUNITION with NSN 1005-01-322-1212, to be delivered within 165 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to demilitarization controls as a Category I munitions item, and strict cybersecurity compliance is mandated through CMMC Level 2 certification. Packaging must adhere to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals and variance requests, while inspection and acceptance occur at the point of origin. The item must be marked with physical identification, though it is exempt from Unique Item Identification. Components are governed by Qualified Products or Manufacturers Lists, and any non-accepted supplies must have government identification removed. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, and only DLA-approved contractors with JCP certification, completed training, and authorized access may handle such data. The place of performance is New Cumberland, PA, 17070-5002, and all inquiries should be directed to Katelyn Young at the provided contact information.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
TORQUE TOOL, SEA
Solicitation # SPE7M4-26-T-326C
The contract pertains to the procurement of two torque tools, identified by NSN 4921-01-605-4834, under solicitation SPE7M4-26-T-326C, issued by the Fluid Handling Division of the Department of Defense. Delivery is required within 20 days after award, with performance to occur in Keyport, Washington, 98345-7610. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) to meet the cybersecurity requirements. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and questionnaire, and have received explicit approval from the Defense Logistics Agency. The North American Industry Classification System code is 332994, and the primary point of contact is Rory O’Reilly at DLA.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
BRACKET, FUELING PRO
Solicitation # SPE4A7-26-T-631P
The contract pertains to the procurement of a BRACKET, FUELING PRO with NSN 5342-00-443-5628, for a quantity of 10 units, under solicitation SPE4A7-26-T-631P, with a delivery requirement of 166 days after award. The item must comply with a broad set of technical, quality, and regulatory requirements including CMMC Level 2 certification for the supplier as a third-party assessment organization, adherence to ISO 9001:2015 quality standards, and strict compliance with DLA packaging and inspection protocols. All supplies must be free from intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents authorized by NAVSEA, and any such permitted items must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals employed by U.S. entities. Access to this controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed required DOD training on export-controlled data handling, and have been formally authorized by DLA. The contract incorporates all relevant requirements from the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The point of contact for the solicitation is Jessica Gentry of the Department of Defense, and the place of performance is designated as New Cumberland, PA, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
BRACKET, FEED TUBE
Solicitation # SPE4A6-26-T-14PV
The item specified is a bracket for a feed tube, identified by NSN 5342-01-128-1745, with a quantity of 32 units required under purchase request 7015852934. Delivery must be completed within 19 days after delivery order issuance. The solicitation, numbered SPE4A6-26-T-14PV, was posted on August 9, 2026, with responses due by August 17, 2026. This procurement is managed by the ASC Commodities Division under the Department of Defense, with performance occurring at New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Emma Garrett, reachable via email and phone provided. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring strict compliance with DFARS 252.225-7048. Disclosure to foreign persons, including employees of U.S. companies or their overseas subsidiaries, is prohibited without prior authorization from the Department of State or Commerce. Access is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed required training on handling defense export-controlled data, and have been formally approved by DLA to access such data. Additional compliance with ISO 9001:2015 quality requirements and DLA packaging standards is mandatory for all manufacturers and non-manufacturers involved.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
SHIELD ASSEMBLY, PRO
Solicitation # SPE7L1-26-T-945F
The contract is for the procurement of 19 units of a Shield Assembly, Pro, a critical gun part subject to stringent defense and export control regulations. The item is classified as a defense article under the International Traffic in Arms Regulations (ITAR), requiring all manufacturers and exporters to register with the Directorate of Defense Trade Controls and provide documentary proof of registration prior to award; failure to do so renders an offer ineligible. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size. The contract mandates that the actual manufacturer and phosphate coating contractor be identified and approved by the Contracting Officer, and any subsequent changes require formal modification. Product Verification Testing may be conducted on each shipment, requiring five samples from each contractor, with one sample potentially destroyed during testing. No Certificate of Conformance is permitted, and inspection will be performed by the DCMA Quality Assurance Representative at the manufacturer’s facility. All manufacturing processes, including phosphate coating, must comply with military specifications and require prior approval of procedures and workmanship specimens by the Post Award Contracting Officer. The contract prohibits the use of Class I ozone-depleting chemicals and imposes strict export controls on technical data under ITAR or EAR, restricting access to only those contractors with approved US/Canada Joint Certification Program status and completed DLA training. Components must originate from Qualified Products or Manufacturers Lists as defined in procurement note H02. Packaging must adhere to DLA standards, and demilitarization procedures apply per Category I munitions guidelines. The contract is a total small business set-aside under NAICS code 332994, with delivery due within 165 days after contract award, and technical data access is tightly controlled to prevent unauthorized disclosure to foreign persons, including U.S.-based subsidiaries.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
KNIFE, COMBAT
Solicitation # SPE7L3-26-T-168D
The contract specifies the procurement of 15 combat knives manufactured by Benchmade Knife Co. Inc. with part number 9070BK and NSN 1095-01-721-4255 at a unit price of $15.00, totaling $225.00, with delivery required within 10 days FOB origin. The knives must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and packaging must adhere to ASTM D3951 as supplemented by MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging standards. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03 from August 2016, though Item Unique Identification is not required as per the service customer’s request. The goods are to be delivered to Hunter AAF in Georgia with no quantity variance allowed, and inspection and acceptance occur at the destination. Shipment must be sent via the fastest traceable means, explicitly excluding parcel post, and the contract mandates compliance with all government-specific freight, marking, and distribution codes including RDD 555 and project 9GF TP 3. The solicitation number is SPE7L3-26-T-168D, with a required delivery date of August 5, 2026, and the point of contact is Katelyn Young of the Department of Defense.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
MAGAZINE, CARTRIDGE
Solicitation # SPE7L4-26-T-6218
The contract is for the procurement of 10 magazines, cartridge, with NSN 1005-01-678-4950 under solicitation SPE7L4-26-T-6218, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within 191 days after award, with a response deadline of August 20, 2026, and a posting date of August 9, 2026. Technical and quality requirements are governed by the DLA Master List, and the item is subject to stringent defense procurement standards including DLA packaging, measuring and test equipment compliance, and tailored higher-level contract quality requirements for both manufacturers and non-manufacturers. The item is classified as a Category I munitions item under DoDM 4160.28-Vol.3, requiring demilitarization upon disposal. Export control compliance is strictly enforced as the technical data associated with this item is subject to ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons anywhere, including within the U.S. Contractors must be certified under the US/Canada Joint Certification Program, have completed mandatory DOD export control training and the DLA export-controlled data questionnaire, and receive explicit approval from DLA to access such data. DFARS 252.225-7048 applies, and government identification must be removed from non-accepted supplies. The contract requires CMMC Level 2 certification for the third-party assessment organization handling cybersecurity matters, and all work is performance-based at New Cumberland, Pennsylvania, with Paula Chapman serving as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROO
Solicitation # SPE4A7-26-T-635L
The contract pertains to the procurement of 52 units of a grooved coupling and clamp with NSN 5342-00-316-9240, sourced under solicitation SPE4A7-26-T-635L issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is subject to rigorous manufacturing requirements, potentially involving casting or forging processes that may require specialized tooling not held by the government, necessitating a Casting and Forging Assistance Request for sourcing support. Compliance with DLA packaging standards is mandatory, and the item is classified under the NAICS code 332994 for other fabricated metal product manufacturing. Delivery is due in 503 days after contract award, with responses required by August 17, 2026. The item is governed by stringent cybersecurity and export control protocols. The supplier must be certified as a CMMC Level 2 C3PAO and adhere to requirements for handling covered defense information. Technical data associated with this item is subject to ITAR or EAR export controls, prohibiting any transfer to foreign persons or entities without prior authorization from the Department of State or Department of Commerce. Access to such data is restricted to U.S.-based contractors approved by DLA who hold valid JCP certification, have completed mandatory training on handling export-controlled technical data, and have passed DLA’s questionnaire review. All activities must comply with DFARS 252.225-7048, and performance is designated for Robins Air Force Base, Georgia, with Michael Johnson listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
PLATE, BUTT, SHOULDER
Solicitation # SPE7L4-26-T-6208
The contract specifies the procurement of four units of a PLATE, BUTT, SHOULDER item with NSN 1005-01-591-5976, supplied by MAGPUL INDUSTRIES CORP under solicitation SPE7L4-26-T-6208. Delivery is required within 20 days FOB origin to Fort Carson, Colorado, with no tolerance for quantity variance, inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization must adhere to DLA packaging standards. The item is classified as a defense article subject to the International Traffic in Arms Regulations, requiring the manufacturer to be registered with the Directorate of Defense Trade Controls and to provide proof of registration. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and cybersecurity compliance requires a Level 2 self-assessment under the CMMC framework. Demilitarization procedures apply as this item falls under Category I munitions. Shipping must be performed via traceable means, prohibiting parcel post, and all documentation must remain tied to the contract line item. The item is part of a federal acquisition under a DoD agency, and the contract includes technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
WEAPON MOUNTING BRA
Solicitation # SPE7L4-26-T-6217
The contract pertains to the procurement of one Weapon Mounting BRA, identified by NSN 1005-01-696-2654 and part number EC0R-0108, with a requirement for delivery within 20 days to FOB destination under solicitation SPE7L4-26-T-6217. The item must be packaged in strict compliance with MIL-STD-2073-1E and marked per MIL-STD-129, with no special marking codes applied. Packaging must adhere to DLA’s packaging requirements, and shipment must avoid parcel post, instead utilizing the fastest traceable means. The delivery address is for USS THEODORE ROOSEVELT CVN 71, with a FPO AP 96632 location, and the shipment is designated under RDD 777, requiring vendor use of the VSM system. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The unit of issue is each (EA), with zero variance allowed on quantity, and inspection and acceptance occur at the final destination. The required delivery date is July 30, 2026, and the contract includes specific government-use only codes for tracking and logistics. The contracting office is the Department of Defense, specifically under the LSO Combat Vehicles and Armament, with Anna-Rachelle Betts listed as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
SLED
Supply of Universal Emergency Breathing Safety System (UEBSS) KitsThe contract pertains to the supply of Universal Emergency Breathing Safety System (UEBSS) kits designed to be compatible with Self-Contained Breathing Apparatus (SCBA) units. Each kit includes a manifold equipped with a Rectus socket and plug, check valves, and two low-pressure hoses measuring 40 inches and 20 inches in length, ensuring flexible and reliable emergency breathing connections in critical situations. The components are specified to ensure seamless integration with existing SCBA systems, enhancing safety and operational readiness for emergency responders. The solicitation is issued as a subcontract under the NAICS code 332994, which classifies it within the Other Miscellaneous Fabricated Metal Product Manufacturing category. The contract is managed by the Polk County Board of Commissioners in Georgia, with a response deadline of September 16, 2026, at 3:00 PM. While no specific place of performance or point of contact is provided, all bids must be submitted through the designated state procurement portal using the provided link before the deadline. The contract does not include any set-aside provisions, and there is no indication of demographic or small business preferences.
Polk County Board of Commissioners

POSTED

2 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-943E
The contract pertains to a non-NSN item with part number 5GQU3FMRB1003N1820A3E10B3SSP1P8 sourced from COTTERMAN CO USA located in Croswell, Michigan, with a total quantity of two units to be delivered in 20 days. Delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling, with palletization adhering to DLA’s RP001 packaging requirements, and packaging unit quantity specified as one per unit pack. The destination for delivery and marking is Camp Carroll, Waegwan, Korea, under the W50YED code, with transportation governed by DLAD Proc Notes C19 and C20. The contract reference is SPE7L1-26-T-943E, with an original required delivery date of August 7, 2026, and a purchase request number of 7017798068. The unit price is not provided but the total cost is implied as two units at the listed price line, with government use indicators and procurement details including the DLA point of contact and contract type classified as a solicitation.
All Other Miscellaneous Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L1-26-T-944L
This contract specifies the procurement of one unit of a box and accessories identified by NSN 2540015981937 under solicitation SPE7L1-26-T-944L, with a required delivery within five days of award and a firm delivery date of August 4, 2026. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications including ASTM D3951 for packaging. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements, with hazardous materials packaged according to TQ requirement IP025 if classified per FED-STD-313. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly permitted by the specification. The item is to be delivered FOB origin with no quantity variance permitted, inspected and accepted at destination, and must be shipped via the fastest traceable means, excluding parcel post. Shipping instructions direct delivery to the DLA Distribution Management Office in Yermo, California, with an alternate parcel post address in Barstow, California. The unit of issue is each, priced at $1.00, with total value of $1.00, and the contract includes strict government-use identifiers and tracking data for logistics coordination.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CLAMP, HUB
Solicitation # SPE7L1-26-T-947J
The contract pertains to the procurement of six CLAMP, HUB units under solicitation SPE7L1-26-T-947J, with a firm delivery deadline of 20 days after order placement. The acquisition is governed by stringent Department of Defense standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, where the applicable revision is controlled by the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through an approved Third-Party Assessment Organization, ensuring robust information protection practices. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program credential, complete mandatory DOD export control training, and receive explicit approval from DLA to access controlled data, with DFARS 252.225-7048 fully applicable. Additionally, government identification must be removed from any non-accepted supplies. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 333613. Point of contact is Kristina Derry, reachable via email and phone provided.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336350
New
DIBBS
DISK ASSEMBLY
Solicitation # SPE7L1-26-T-945B
The item under contract is a disk assembly manufactured through a forging process, with stringent technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. Critical welding per Drawing 10861595 must meet specifications outlined in Drawing 12479550, including mandatory preproduction submission of the contractor’s welding procedure specification. Inspection and acceptance must occur at the manufacturer’s facility, with technical verification required—count, kind, and condition inspections are prohibited. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified, and critical, major, and minor attributes are assigned verification levels or AQLs as defined. The product is classified as a critical application item and must not contain Class I ozone-depleting chemicals; any substitutes require prior approval. Configuration changes require formal engineering change proposals or variance requests. Packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129, with specific materials and methods detailed, and palletization aligned with DLA requirements. Final delivery is FOB origin, with no tolerance for quantity variance, and the item must be delivered by January 11, 2027, to the DLA distribution facility in New Cumberland, Pennsylvania. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 336350, with unit price of $58.00 for a total of 58 units, and the contract data references the full technical documentation controlled by multiple drawing revisions dating back to 1965 and updated through 2022.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L1-26-U-0557
The contract pertains to the procurement of a power supply with part number TH-4322, supplied by Arnold Magnetics Corporation under solicitation SPE7L1-26-U-0557, with a total quantity of 10 units at a unit price of $10.00, delivered FOB origin within 127 days. The item is covered under a Total Small Business Set-Aside and is classified as a critical application item. It must comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-STD-129 for marking, and all bare items must be marked with the contract number, NAWC CAGE code, and part number unless superseded by technical drawings. Technical and quality requirements are incorporated by reference from the DLA Master List, and sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited except for specific functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical analysis reagents specified by NAVSEA, and any portable items containing mercury must include shockproof construction and secondary containment per NAVSEA 5100-003D. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and cybersecurity compliance requires a CMMC Level 2 self-assessment. The NSN is 6130014614336, the unit of issue is EA, and the inspection and acceptance points are at destination with zero variance allowed on quantity.
Motor and Generator Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332111
New
DIBBS
GUIDE, CAM FOLLOWER, FO
Solicitation # SPE7L1-26-T-946Y
The contract pertains to the procurement of a Guide, Cam Follower, Folding Floor, identified by NSN 5340-01-540-4920 and part number 7017777897, with a quantity of 64 units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered provisions including packaging standards, removal of government identification from non-accepted supplies, and qualified products or manufacturers lists. The item must comply with stringent quality assurance protocols, including mandatory Certificates of Quality Compliance and Metal Certification, which are to be submitted as part of the Contract Data Requirements Lists. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. Technical documentation, including drawings and quality assurance provisions, is referenced under Revision D of the Technical Data Package dated through 2025. Delivery is FOB origin with inspection and acceptance occurring at destination, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking. The product must be palletized according to DLA packaging directives and shipped to the designated facility in Tracy, California. The delivery deadline is 116 days from contract award, with an original required delivery date of April 7, 2027, and a need ship date of February 5, 2026. The unit price is $64.00, resulting in a total contract value of $4,096, and the solicitation was issued under SPE7L1-26-T-946Y with responses due by August 20, 2026.
Iron and Steel Forging

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
INJECTOR ASSEMBLY, F
Solicitation # SPE7L1-26-T-946Q
The contract is for one fuel injector assembly, part number 4928260 with NSN 2910-01-710-6138, designated as a critical application item under solicitation SPE7L1-26-T-946Q. The item must be delivered in a single unit within 20 days, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined including unit container E5 and intermediate container E5. Palletization must follow RP001 DLA packaging requirements, and no special marking is required. The delivery destination is the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia, but parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The original required delivery date is August 10, 2026, and the contract includes project code ZH9 TP 2 and government-use identifiers for tracking. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 336310 for motor vehicle parts manufacturing, managed by the Department of Defense's Land Supply Chain.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
PROPELLER SHAFT WIT
Solicitation # SPE7L1-26-T-944M
The contract pertains to the procurement of a propeller shaft with a universal joint, identified by NSN 3010-01-122-5657 and part number 13026540, supplied by GE Aviation Systems LLC and Whippany Actuation Systems LLC. Eight units are required to be delivered within 165 days from the order date, with delivery terms set as FOB origin and inspection and acceptance occurring at the destination. The items must be packaged in strict compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Packaging must follow RP001 DLA Packaging Requirements for Procurement and be palletized accordingly. The contract includes mandatory compliance with CMMC Level 2 cybersecurity self-assessment and applies to covered defense information as outlined in RD002. Pricing is fixed at $8.00 per unit for a total of $64.00, with zero variance allowed in quantity. The delivery destination is DLA Distribution Red River in Texarkana, TX, with the required ship date set for February 2, 2027. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, whose controlling revision depends on the acquisition type and solicitation amendment dates. The contract is issued under solicitation SPE7L1-26-T-944M, with a primary point of contact at DLA for inquiries.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 322219
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-944J
This contract under solicitation SPE7L1-26-T-944J specifies the procurement of 52 units of a COVER, ACCESS item with NSN 5340-01-322-3592, to be delivered FOB origin within 74 days of contract award with no variance allowed in quantity. All items must comply with strict technical, quality, and packaging standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with no special markings required. The product is classified as a critical application item and must adhere to the technical drawing revision B dated 01/20/2023. Zero tolerance is enforced for non-conformances in sampling, requiring zero defects under MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds in any part of the product, preservation, packaging, or marking, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents, all of which must incorporate secondary containment if used. Packaging must meet DLA’s requirements including palletization and shipping standards, with delivery directed to the specified warehouse in Tracy, CA. The contract enforces configuration change management and requires formal requests for any deviations or waivers. Quality assurance allows for a Certificate of Conformance unless overridden by a Quality Assurance Letter of Instruction. This is a total small business set-aside under NAICS 322219 with full and open competition, and all documentation references the DLA Master List of Technical and Quality Requirements. The delivery deadline is December 6, 2026, with an original ship date of November 3, 2026.
Other Paperboard Container Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-943J
The contract is for a single O-RING with NSN 5331-01-378-8578, required for delivery within 20 days ADO under solicitation SPE7L1-26-T-943J, issued on August 9, 2026, with proposals due by August 20, 2026. The item is to be delivered to Fort Bragg, North Carolina, and the solicitation is managed by the Department of Defense’s Land Supply Chain through Kristina Derry at DLA. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, where technical specifications referenced by R or I numbers are incorporated by full text from the DLA website. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for approved functional uses such as batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. All non-accepted supplies must have government identification removed prior to return, and the NAICS code 339991 applies to this procurement.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-943K
The contract is for a single helical compression spring identified by NSN 5360-01-248-1585, with a delivery requirement of 10 days after award. The solicitation number is SPE7L1-26-T-943K, issued on August 9, 2026, with responses due by August 20, 2026, under a federal procurement process managed by the Department of Defense’s Land Supply Chain. The item is intended for performance at Fort Bragg, North Carolina, and the procurement falls under NAICS code 332613 for spring manufacturing. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions controlled by the solicitation issuance or award date depending on acquisition type. Packaging must comply with DLA packaging standards and any non-accepted supplies must have government identification removed prior to return. The primary point of contact is Kristina Derry, reachable via email and phone provided, and all relevant information is accessible through the DIBBS portal.
Spring Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-945H
This contract covers the procurement of a mounting bracket identified by part number 347/22650 and NSN 5340016196797, with a quantity of 15 units delivered FOB origin under solicitation SPE7L1-26-T-945H. The delivery is required within 165 days from the contract award, with no variability in quantity allowed, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. All items must comply with the DLA Master List of Technical and Quality Requirements, including MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling, with packaging adhering to RP001 DLA Packaging Requirements. Hazardous materials must be packaged per TQ requirement IP025 under FED-STD-313, while non-hazardous materials must follow ASTM D3951—though DLA requirements supersede ASTM. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specifications. The item must be palletized as specified, with the Unit of Issue being each and the Quantity per Unit Pack set at 1. The shipping address matches the delivery destination, and performance is governed by DLA procedural notes C19 and C20 for transportation. The contract was posted on August 9, 2026, with a response deadline of August 20, 2026, under NAICS code 332722, and is managed by the Department of Defense’s Land Supply Chain organization.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details