This Solicitation opportunity from Department Of Health And Human Services was posted on September 16, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Contractor Laboratory Support Services and Disposal of Packaging Materials

Closed

75F40124Q00549Federal

Submission Closed09/19/2024, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps Center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material floor tiles in the Gymnasium (approximately 600 square feet) and the Warehouse and Warehouse Storage Area (approximately 3,600 square feet total). All activities must be performed by licensed professionals using accredited laboratories and conducted in strict accordance with federal, State of Illinois, OSHA, and EPA regulations. This opportunity is open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. Bidders must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award selection is based on best value. The successful contractor must comply with Service Contract Labor Standards, specifically Wage Determination 2015-5019 Rev 31, and adhere to strict government and Department of Labor guidelines regarding information security, privacy breach notifications, and mandatory training. Final acceptance of work is contingent upon the delivery of all waste manifests, laboratory reports, and a final project completion report.

POSTED

DEADLINE

Trace Organic Analysis Laboratory ServicesThis subcontract for Trace Organic Analysis Laboratory Services supports prime contractors on wastewater projects for the City of Atlanta Department of Watershed Management. The selected provider will perform laboratory testing of wastewater samples to verify compliance with industrial pretreatment program requirements and NPDES permits, adhering strictly to Georgia EPD and EPA standards. The contractor must hold NELAP or a state-equivalent certification to deliver certified data and laboratory analysis reports. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

POSTED

DEADLINE

Material Testing and Special InspectionsThis subcontract for East Texas A&M University involves providing third-party testing of construction materials and specialized inspections for prime contractors on university facility projects. The scope of work includes conducting soil compaction, concrete slump and strength, and weld testing, as well as performing special inspections to ensure compliance with applicable building codes. The selected provider must utilize an accredited testing laboratory and non-destructive testing tools to deliver certified material test reports and detailed inspection logs. Qualified contractors are required to hold ICC certifications to perform these specialized services. This opportunity is categorized under NAICS code 541380 and was posted on October 21, 2026, with a response deadline of November 6, 2026.

East Texas A&M University

POSTED

DEADLINE

Third-Party Materials Testing and InspectionThis subcontract for Third-Party Materials Testing and Inspection, issued by the Fulton County Purchasing Department in Georgia, involves providing independent testing and inspection of coatings for prime contractors on water storage projects. The scope of work includes inspecting surface profiles after blasting, measuring dry film thickness, conducting adhesion testing, and performing quality assurance inspections using holiday detectors and DFT gauges. Qualified providers must employ NACE/AMPP certified coating inspectors to ensure all standards are met and deliver detailed inspection reports and certifications of compliance. The solicitation was posted on October 21, 2026, with a response deadline of November 18, 2026, falling under NAICS code 541380.

Fulton County Purchasing Department

POSTED

DEADLINE

Environmental Laboratory Analysis and Technical ServicesThe Environmental Laboratory Analysis and Technical Services subcontract supports prime contractors on projects for the Rhode Island Department of Environmental Management. The scope of work involves performing chemical analysis of unknown materials and providing environmental consulting, specifically focusing on organic and inorganic analysis, EPA Method 1311 Zero Headspace Extraction, and comprehensive geological and hydrological assessments. The primary deliverables for this engagement are detailed analytical reports and compliance summaries. To qualify for this contract, service providers must maintain laboratory accreditation for the required EPA methods. Additionally, the contract mandates that personnel performing specialized tasks hold professional licenses in geology, biology, or toxicology. This effort falls under NAICS code 541380 and is managed through the State of Rhode Island.

State of Rhode Island

POSTED

DEADLINE

Construction Inspection and Quality AssuranceThis subcontract for Construction Inspection and Quality Assurance involves performing on-site inspections of construction activities for prime contractors on City of Okeechobee projects. The primary objective is to ensure all work complies with engineering plans and specifications. Responsibilities include attending Technical Review Committee meetings and utilizing specialized field testing equipment and inspection software to monitor progress. Qualified candidates must be certified inspectors, with credentials such as ACI or NICET. Key deliverables for the contract include the submission of daily inspection reports, non-compliance reports, and final inspection sign-offs. The solicitation was posted on October 21, 2026, with a response deadline of November 6, 2026.

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Hydrostatic CertificationThis subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech, involves providing specialized non-destructive testing and hydrostatic certification for critical safety items on Naval Sea Systems Command projects. The scope of work includes performing hydrostatic testing at 150 percent pressure, dye penetrant inspections, and quantitative chemical and mechanical analysis of titanium alloys to ensure structural integrity and safety compliance. Qualified contractors must hold a Confidential security clearance and possess ASNT Level II or III certifications to perform these technical evaluations. The primary deliverables for this engagement are certified test reports and detailed analysis data. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Specialized Aerospace Testing & CalibrationThis subcontract for Specialized Aerospace Testing and Calibration supports NAVSUP Weapon Systems Support projects by providing final testing and inspection of refueling probes for prime contractors. The scope of work involves conducting rigorous testing in accordance with approved repair and overhaul manuals, utilizing special test equipment and calibrated measurement tools that adhere to ANSI/NCSL Z540 or ISO-10012-1 standards. The selected provider is responsible for delivering comprehensive technical documentation, including detailed test reports, dimensional readings, and RFI certification. This effort falls under NAICS code 541380 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight-Critical Module Testing and CertificationThe Flight-Critical Module Testing and Certification subcontract involves performing final testing and inspection of repaired NRP/NSPR Module Assemblies for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider must execute testing procedures according to approved repair and overhaul manuals, utilizing calibrated measuring and test equipment that complies with NCSL Z540.3 or ISO 10012 standards. The primary deliverables for this engagement include detailed test reports and the certification of Ready For Issue status for every unit processed. This Department of Defense requirement falls under NAICS code 541380, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

CSI Material Testing and Ultrasonic Inspection ServicesThe CSI Material Testing and Ultrasonic Inspection Services subcontract involves providing specialized non-destructive testing and laboratory analysis for prime contractors supporting the Department of Defense, specifically the NAVSUP Weapon Systems Support Mech. The scope of work focuses on the ultrasonic inspection of starting materials and the execution of slow strain rate tensile tests for Level I Special Emphasis material in accordance with DI-QCIC-81110 (SE) standards. To fulfill these requirements, the contractor must utilize professional ultrasonic testing equipment and laboratory-grade tensile machinery. Key deliverables for this engagement include the provision of detailed inspection reports, test certifications, and Certificates of Compliance. This opportunity falls under NAICS code 541380 and has a response deadline of November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and SurveyThis subcontract opportunity, managed by the Department of Homeland Security for the US Coast Guard SFLC, involves providing specialized non-destructive testing and survey services for vessel projects. The selected contractor will perform technical inspections, including ultrasonic testing of hull plating freeboard and underwater hull plating and appendages. Key deliverables include the submission of detailed Condition Inspection Reports and comprehensive ultrasonic test results. The project requires the deployment of Certified Non-Destructive Test inspectors to ensure all technical standards are met. This is a total small business set-aside under NAICS code 541380. Interested parties must submit their responses by November 16, 2026.

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality CertificationThis subcontract focuses on providing Non-Destructive Testing (NDT) and quality certification services for prime contractors supporting the Department of Defense, specifically within the NAVSUP Weapon Systems Support Mech agency. The scope of work involves executing NDT procedures to ensure material compliance for Special Emphasis Level I safety requirements and conducting quality audits. The selected provider is responsible for preparing detailed records for DCMA and DCAA QAR review and delivering validated inspection records and test reports. To ensure technical accuracy and regulatory adherence, the contract mandates strict compliance with ISO/IEC 17025 and ANSI/NCSL Z540.3 standards. This opportunity falls under NAICS code 541380, with a response deadline set for November 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

General Info

Agency

Department Of Health And Human Services → FDA Office Of Acq Grant Svcs

Contract Value

$81,907.2

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Silver Spring, MD, 20993, USA

Set-Aside

NONE

Awardee

SAMYAK SOLUTIONS, INC.

Award Issued Date

09/24/2024, 12:00:00 AM UTC

Documents

RFQ 75F40124Q00549 - Contractor Support Services for Disposal of Packaging Materials

rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedSep 16

Solicitation

Response DeadlineSep 19

Deadline has passed

Submission Closed

09/19/2024, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Health And Human Services → FDA Office Of Acq Grant Svcs

Contacts1 person available

OfficeBeltsville, MD, 20705, USA

Organization / AgencyDepartment Of Health And Human Services → FDA Office Of Acq Grant Svcs

Office AddressBeltsville, MD, 20705, USA

Contacts

Matthew Tran

contact@example.gov

Full Description

Please see the attachment for the full solicitation including instructions. The contractor shall perform the following tasks and any additional tasks of comparable complexity established by OCBQ staff: Disposal of Refrigerated Sample Boxes: After samples and paperwork are removed from boxes by Product Review Branch (PRB)/OCBQ staff, the boxes will be placed in the hallway outside of the lab spaces. The contractor shall: Shall have at least a High School Diploma Remove any loose materials from the outside of the boxes (e.g., loose tape, plastic paper holders) and dispose of them in trash bags/cans as directed. Remove any cold packs and dispose them in trash bags/cans as directed. Remove packing peanuts and place them in trash bags/cans as directed. Remove any bubble wrap and place it into trash bags/cans as directed. Break down empty boxes and stack them off to the side for removal by custodial staff. Handling of Boxes containing Dry Ice (frozen carbon dioxide at -20 degrees Centigrade): FDA staff will receive shipments (boxes) from the Sponsors, remove samples and paperwork from the boxes. The contractor shall pool the dry ice from the boxes into containers. Training shall be provided to handle dry ice. Cleanup: At the end of each day or as directed by designated OCBQ staff, the contractor shall remove any full bags of trash (e.g., packing peanuts, bubble wrap) and place them in the hallway for removal by the GSA contract custodial staff. Relocate dry ice in a container to outside the building for sublimation into the atmosphere. Safety and Support Activities: The contractor shall also provide support for Division of Biologics Quality Control (DBSQC)/OCBQ objectives, including weekly safety checks of eyewash stations, assist laboratory staff when needed with waste disposal, surplus, autoclaving, moving supplies between laboratories. Training will be provided as appropriate including participating in DBSQC division wide meetings and team building events as needed. Safety and support goals of comparable complexity may be established by DBSQC staff.