This Solicitation opportunity from Government of Canada was posted on January 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Contrat à commande pour l'acquisition d'actuateurs pour support de flèche de camionnette de surveillance routière (Cacouna)

Closed

20110157International

Submission Closed01/19/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333995

New

DIBBS

CYLINDER ASSEMBLY, AThe contract pertains to the procurement of a CYLINDER ASSEMBLY, A with NSN part number 3040-01-411-4886, for a single unit as specified in purchase request 7017589316. The solicitation number is SPE7L3-26-T-134J, issued by the Defense Logistics Agency under the Department of Defense, with a posted date of July 26, 2026, and a response deadline of August 6, 2026. The procurement is classified as a federal solicitation with no set-aside designation, and the place of performance and organizational details are not specified beyond the country code for the United States. Interested parties must submit responses through the official DIBBS portal via the provided UI link before the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

CYLINDER ASSEMBLY, ACTUA solicitation has been issued for the procurement of three Cylinder Assembly, Actu units under NSN 3040-01-282-6475, with the purchase request numbered 1000237292. The solicitation, identified by number SPE7L4-26-U-1001, was posted on July 26, 2026, and requires responses to be submitted by August 10, 2026. This transaction is managed by the Defense Logistics Agency under the Department of Defense, and the contract is classified as a federal solicitation with no set-aside designation. The place of performance and office address details are not specified, but the solicitation is accessible through the DIBBS system via a public link. No point of contact information is provided within the solicitation data.

Defense Logistics Agency

POSTED

DEADLINE

CYLINDER ASSEMBLY, ACTUThe contract solicitation is for a CYLINDER ASSEMBLY, ACTU with NSN and part number 3040-01-435-0999, under purchase request 7017603780 for a quantity of 44 units. The solicitation number is SPE7L1-26-T-877X, posted on July 26, 2026, with a response deadline of August 6, 2026. The procurement is managed by the Defense Logistics Agency under the Department of Defense and is classified as a federal solicitation. No specific set aside or NAICS code is indicated. The place of performance and office address details are not provided, and there is no listed point of contact. Bidders can access the full solicitation details through the designated DIBBS portal link.

Defense Logistics Agency

POSTED

DEADLINE

CYLINDER, ACTUATING, LINThe contract pertains to the procurement of one cylinder, actuating, lin, identified by NSN 3040-01-669-3653, under purchase request 7017605276. The solicitation is issued by the Defense Logistics Agency, a division of the Department of Defense, and is formally titled under solicitation number SPE7L1-26-T-876X. The opportunity was posted on July 26, 2026, with a response deadline set for August 6, 2026, indicating a five-week window for potential vendors to submit bids. The procurement is classified as a federal solicitation with no specific set-aside designation, and there is no designated NAICS code provided. The place of performance and office address details are not specified, though the country of performance is confirmed as the United States. Interested parties can access additional details through the official DIBBS portal using the provided UI link.

Defense Logistics Agency

POSTED

DEADLINE

CYLINDER ASSEMBLY, ACTUThe contract pertains to the procurement of six Cylinder Assemblies, Actu, identified by the NSN part number 3040-01-642-5340, under purchase request 7017601203. This solicitation, issued under the number SPE7L1-26-T-877M, was posted on July 26, 2026, with a response deadline of August 6, 2026, indicating a standard competitive procurement timeline. The contracting authority is the Defense Logistics Agency within the Department of Defense, confirming the federal nature of this acquisition. The solicitation does not specify a set-aside designation or NAICS code, suggesting it is open to general industry participation without preferential treatment. The place of performance and point of contact details are not provided, and the procurement is managed through the DIBBS platform, with the full solicitation accessible via the provided link.

Defense Logistics Agency

POSTED

DEADLINE

ACTUATOR, ELECTRO-METhe contract pertains to the procurement of one electro-mechanical actuator identified by NSN 4810-01-539-1518 under Purchase Request 7017607426. The solicitation, numbered SPE7MC-26-T-154N, was posted on July 26, 2026, with a response deadline set for August 6, 2026. It is issued by the Defense Logistics Agency under the Department of Defense as a federal solicitation, indicating it is intended for government use and follows standard federal acquisition procedures. The actuator is likely a critical component for defense systems, given the agency involved and the nature of the item. No specific set-aside provisions or NAICS code are listed, suggesting this opportunity is open to general industry competition. The place of performance and point of contact details are unspecified, and interested parties must access the official DIBBS portal via the provided UI link to obtain full solicitation documents and submit proposals.

Defense Logistics Agency

POSTED

DEADLINE

GLAND ASSEMBLY, ACCUMULThe contract solicits 52 units of a GLAND ASSEMBLY, ACCUMULATOR, specifically a GLAND, KIT CYLINDER equipped with Viton seals, under NSN 3950-01-174-9066 and part number RG2AHL0105 from Parker Hannifin Corporation. Delivery is required within eight days of award, with FOB Destination terms, to the DDSP New Cumberland Facility in Pennsylvania. The item has a non-extendable 240-month (20-year) shelf life as a Type I (Code Z) item, requiring packaging, preservation, and labeling compliant with MIL-STD-2073-1E and MIL-STD-129, including special marking code 32-32 to indicate shelf life status. Preservation must use method AE with controlled drying and no additional preservation compounds beyond what is inherent in the method. All packaging, preservation, and marking materials are strictly prohibited from containing mercury or mercury compounds per IP056 and NAVSEA 5100-003D, and portable fluorescent lamps or instruments containing mercury, if used, must be shockproof with a secondary containment barrier. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The contract incorporates DLA’s Master List of Technical and Quality Requirements referenced by R-numbers, and all deliveries must be palletized per RP001. The contract is fixed-price, with inspection and acceptance occurring at destination under FAR 52.246-2, and invoicing must be submitted electronically via WAWF. Compliance with cybersecurity requirements including NIST SP 800-171 and safeguarding covered defense information per DFARS 252.204-7012 is mandatory, and the contractor must affirm compliance with prohibitions on covered defense telecommunications equipment. Offerors must hold a valid UEI and CAGE code and represent their small business status, with all submissions required through the DIBBS portal by August 3, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

CYLINDER AND PISTON ASSEMBLY, LANDING GEAThe contract solicitation SPE4A7-26-R-0681 seeks the supply of Cylinder and Piston Assembly, Landing Gear, identified by NSN 1620-01-623-9220, under an Indefinite-Quantity Contract with Firm Fixed Price terms. The procurement is managed by the Defense Logistics Agency under the Department of Defense, with a solicitation posted on July 23, 2026, and responses due by August 24, 2026. The estimated annual demand is 40 units, with a guaranteed minimum delivery of 10 units per order and a maximum of 40 units per order. The total contract value is capped at $899,999.99, and the contract will have a five-year base period without options. Delivery must occur 138 days after receipt of an order, with FOB Destination terms, meaning the contractor assumes all transportation risk until the goods reach the government-designated destination. Inspection and acceptance occur at the origin, with the government retaining final authority over acceptance. Packaging and marking must comply with DLA’s RP001 and MIL-STD-129, including the labeling of test samples with explicit instructions and contract identifiers. Bar-coding is required via MIL-STD-129, and compliance with the DLA Master List of Technical and Quality Requirements takes precedence over general standards like ASTM D3951. The solicitation requires strict adherence to federal acquisition regulations and defense-specific cybersecurity mandates, including NIST SP 800-171 and DFARS 252.204-7012, to safeguard covered defense information and report cyber incidents within 72 hours. All subcontractors must comply with the same cybersecurity requirements, and the prime contractor is responsible for ensuring flowdown and verification. The contract includes clauses relating to disputes, changes, bankruptcy, Buy American Act Alternate II, specialty metal restrictions, sustainable products, and labor standards, including paid sick leave and diversity, equity, and inclusion compliance. Cost or pricing data requirements and equitable adjustment mechanisms are in place, and invoicing must be submitted exclusively through Wide Area WorkFlow. Evaluation for award will be based on a best-value trade-off process, where past performance—particularly supplier performance risk system assessments, historical quality, and delivery schedule compliance—is significantly more important than other non-price factors. Offerors must have an active Unique Entity Identifier and C

Defense Logistics Agency

POSTED

DEADLINE

CYLINDER ASSEMBLY, REACThe contract pertains to the procurement of cylinder assemblies, specifically gas springs designated for use on light armored vehicles, identified by NSN 2540011689885 and part number C16-09444A from SUPPLIER SUSPA, INCORPORATED. The item is classified as a critical application component requiring strict compliance with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. All units must adhere to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA Packaging Requirements for Procurement (RP001), with no special marking applied. The item is subject to zero quantity variance and is inspected and accepted at the destination. Deliveries are FOB origin with a 58-day delivery window. Three distinct line items total 92 units: 23 units at $23.00 each, 32 units at $32.00 each, and 37 units at $37.00 each, with shipment destinations including New Cumberland PA, Albany GA, and Barstow CA. Original delivery deadlines are set for February 22, 2027, though different ship dates are specified for each line item ranging from August 2027 to October 2026. The contract is issued under solicitation SPE7L4-26-T-5760, classified under NAICS code 333995, and managed by the Department of Defense’s Combat Vehicles and Armament office.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

CYLINDER ASSEMBLY, ACTUThe contract pertains to the procurement of 68 units of a cylinder assembly, actuating, linear, identified by NSN 3040-01-566-4370 and part numbers 3691710C91 from ND DEFENSE LLC and 1C-4992 from PARKER HANNIFIN CORP FLUIDPOWER. The item must be delivered within 168 days of contract award, with delivery terms set as FOB origin and no tolerance allowed for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951, with DLA Master List of Technical and Quality Requirements taking precedence. Packaging and labeling must adhere strictly to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The delivery address is the DLA Distribution facility in New Cumberland, PA, with a required ship date of January 19, 2027, though the original delivery target was January 10, 2027. The contract is part of a total small business set-aside under NAICS code 333995, issued under solicitation SPE7L1-26-T-875H, which was posted July 23, 2026, with proposals due August 3, 2026. Unit price is $68.00 per unit, totaling $4,624. All technical and quality specifications referenced by R or I numbers are controlled by the DLA Master List effective on the solicitation issue date. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Transportation logistics are governed by DLAD Proc Notes C19 and C20.

POSTED

DEADLINE

17--CYLINDER,VENTEDThe item identified by NSN 7R-1720-012857190-EY, a vented cylinder, is a flight-critical component requiring government source approval prior to contract award due to its incorporation of unclassified but militarily sensitive technology. Acquisition or repair of this item is restricted to previously approved government sources, as the technical data available does not support full and open competition, and the time required to approve a new supplier would delay fulfillment of critical fleet requirements. Only entities previously authorized by the government may submit offers without additional documentation; all other potential suppliers must submit complete source approval information per the NAVSUP Weapon Systems Support brochures, either for spares or repair, depending on their proposed activity. Offers lacking the required submissions or proof of an ongoing source approval request will be deemed nonresponsive. The government intends to award this contract to a sole source under FAR 6.302-1, with no obligation to compete even if other parties express interest. Potential offerors who believe they can supply this item as a commercial item must notify the contracting officer within 15 days of this notice. The response deadline is September 8, 2026, and deliveries are to be made FOB origin. Technical specifications, military standards, and related documentation may be accessed through ASSIST-Online or the DODSSP, while direct inquiries should be directed to the primary point of contact listed.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

30--CYLINDER ASSEMBLY,ACTUThe contract seeks the procurement of 68 cylinder assembly actuator units under NSN 3040015664370, with delivery required to DLA Distribution facility W1A8 within 168 days after order placement. Only two approved sources are designated for this item: 338X5 with part number 3691710C91 and 3Y690 with part number 1C-4992. The solicitation is issued as a Request for Quote under number SPE7L126T875H and is exclusively available electronically through the provided SAM.gov link; no hard copies will be distributed, and no technical specifications, plans, or drawings are provided. All responsible parties may submit quotes, provided they are submitted electronically and received prior to the deadline of August 3, 2026. This opportunity is a Total Small Business Set-Aside under NAICS code 333995, restricted to small businesses as defined by the SBA. The contracting office is the DLA Land and Maritime based in Columbus, Ohio, with inquiries directed exclusively to the designated point of contact via email.

DLA Land And Maritime

POSTED

4 days ago

DEADLINE

in 7 days

AI Contract Overview

This contract involves a call-up agreement for the procurement of actuators used in the support of the boom arm on a road surveillance van in Cacouna. Issued by the DGCGER under the Ministry of Transport for the Government of Canada, the solicitation aims to acquire these specific mechanical components to enhance or maintain the operational capabilities of surveillance vehicles tasked with monitoring road conditions. The contract is federal in nature and is set to be performed in the Bas-Saint-Laurent region. The solicitation was posted on January 9, 2026, with a deadline for response set for January 19, 2026, which indicates a relatively short window for interested suppliers to submit their proposals. The procurement opportunity does not specify any set-aside programs or NAICS code classification, suggesting it is open to all capable vendors. The primary point of contact is the Contracting Authority at CGER, reachable via email or phone, providing a clear channel for inquiries. This contract reflects the government’s ongoing investment in ensuring the effectiveness and reliability of its road monitoring infrastructure.

General Info

Call-up contract for procuring actuators to support surveillance van boom arm in Cacouna.

Agency

Government of Canada → DGCGER (Ministère des transports)View Agency

NAICS

333995 - Fluid Power Cylinder and Actuator ManufacturingView NAICS

Place of Performance

Bas-Saint-Laurent, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJan 9

Solicitation

Response DeadlineJan 19

Deadline has passed

Submission Closed

01/19/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → DGCGER (Ministère des transports)

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → DGCGER (Ministère des transports)

View Agency Profile

Office AddressN/A

Contacts

CGER CGERContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

Contrat à commande pour l'acquisition d'actuateurs pour support de flèche de camionnette de surveillance routière (Cacouna)