This Solicitation opportunity from Government of Canada was posted on May 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Contrat à commande pour l'acquisition de chargeuses sur roues 2.3m3, 2.7m3 et 2.8m3 (Ensemble du territoire du Québec)

Closed

20146470Canada

Submission Closed06/15/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333120

New

Federal

25--ARM,SKIDThe contract seeks the procurement of one ARM, SKID with NSN 2590997009459, to be delivered to DLA Distribution Red River within 277 days after award. The only approved source for this item is K0824 PE21497, and all responsible vendors may submit quotes provided they meet the submission requirements. This solicitation is issued as a Combined Solicitation under the type of set-aside designation as a Total Small Business Set-Aside, as defined under FAR 19.5, and is classified under NAICS code 333120. Quotes must be submitted electronically through the SAM.gov portal and are not accepted via hard copy. No specifications, plans, or drawings are available with this RFQ, and bidders are expected to rely on the information provided in the official solicitation document accessed via the SAM.gov link. The solicitation number is SPE7L126T794L, posted on July 5, 2026, with responses due by July 16, 2026. All questions regarding the solicitation must be directed to the designated point of contact at DibbsBSM@dla.mil, and the full solicitation document can be retrieved through the additional information link or by searching the solicitation number on the DIBBS website. The contracting office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime organization.

DLA Land And Maritime

POSTED

DEADLINE

Swing Arm Brush CutterThe contract seeks a swing arm brush cutter designed to match the performance of the Blue Diamond Skid Steer Swing Arm Brush Cutter, with strict technical requirements ensuring robust vegetation management across challenging terrain such as banks, right-of-ways, fence lines, and trails. The unit must feature a 44-inch cutting width, a minimum 4-inch material cutting capacity, and achieve a horizontal reach of at least 8 feet and a vertical reach of up to 16 feet. Compatibility is limited to skid steers with a minimum operating weight of 6,500 lbs and requires a greaseable direct drive system powered by a 17 to 30 GPM piston motor capable of operating up to 4,000 PSI with a case drain, weighing approximately 1,203 lbs. Construction must be rugged, incorporating a 3 inch by 16 inch tilt cylinder, a heavy-duty 5/8-inch thick blade carrier holding two double-sided AR400 steel blades, and a protective push bar. The unit must be powered exclusively by a piston motor and satisfy Buy American Act compliance. All proposals must meet these exacting standards without deviation. The solicitation, numbered W911S226U3574, was posted on July 3, 2026, with a response deadline of July 10, 2026, and is classified as a total small business set-aside under NAICS code 333120. The contract is managed by the Department of Defense through the Office at Fort Drum, New York, with performance expected to occur at a location with zip code 36362. Primary point of contact is Daniel Spillers, reachable via email at daniel.m.spillers.civ@army.mil or phone at 334-255-2416. The opportunity is issued under a combined solicitation format and requires full adherence to specifications outlined in the accompanying documentation, with no deviations permitted unless explicitly authorized.

POSTED

DEADLINE

Wheel Load WeighersWilco is soliciting bids for Wheel Load Weighers to support the L&W Unit in Texas, with the opportunity posted on July 2, 2026, and responses due by July 7, 2026, at 10:00 PM Central Time. The solicitation number is 26RFQ66, and all submissions must be made through the official portal at https://wilco.bonfirehub.com/opportunities/243044. The primary point of contact for inquiries is Virginia Johnson, reachable via email at virginia.johnson@wilcotx.gov. The equipment is intended for use at a location within Texas, and while no specific NAICS code, set aside type, or organization type is specified, the procurement is open to eligible suppliers capable of delivering compliant wheel load weighers. The contract does not indicate a pre-determined award structure or funding cap, and interested parties are expected to respond with technical and commercial proposals that meet the agency’s operational requirements for accuracy, durability, and integration with existing systems.

POSTED

DEADLINE

Demolition RobotThe contract solicitation titled Demolition Robot seeks a solution that meets or exceeds the technical specifications detailed in the attached Product Description Document, ensuring the delivered system is fully capable of performing required demolition tasks under operational conditions. This is a Total Small Business Set-Aside under FAR 19.5, exclusively open to small businesses, with the NAICS code 333120 classifying it under Other Industrial Machinery Manufacturing. The solicitation was posted on July 2, 2026, and responses are due by August 4, 2026, at 5:00 PM Eastern Time. Performance of the contract will take place in Klamath Falls, Oregon, with delivery and support expected at the specified location. The Department of Defense, through its W7NW Uspfo Activity Orang 173 office, is the contracting entity, located at 97603-2108 in Klamath Falls, Oregon. Primary point of contact is Dan Wehnes, reachable via email or phone, with Jason Rice listed as the secondary contact for additional inquiries. Interested vendors must submit proposals through the official SAM.gov portal linked in the solicitation.

W7NW Uspfo Activity Orang 173

POSTED

DEADLINE

Demolition Robot Supply and IntegrationThe contract entails the procurement and delivery of a fully functional demolition robot system designed to meet specific technical requirements for use in Klamath Falls, Oregon. This includes not only the hardware delivery but also the full integration and rigorous testing of the system to ensure operational readiness and compliance with all stated performance standards. The work is governed as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid, and the NAICS code 333120 classifies this as industrial machinery manufacturing. The opportunity was posted on July 2, 2026, with a firm deadline for responses set for August 4, 2026, at 5:00 PM Eastern Time, and the performance location is clearly designated as Klamath Falls with a zip code of 97603. The contracting activity falls under the Department of Defense through the W7NW Uspfo Activity Orang 173, indicating a military or federal application for the robot system. The terms emphasize end-to-end responsibility from manufacture through validated field deployment, with no flexibility on technical specifications or delivery location.

W7NW Uspfo Activity Orang 173

POSTED

3 days ago

DEADLINE

in 30 days

AI Contract Overview

The contract is a command-based acquisition for wheeled loaders with bucket capacities of 2.3m³, 2.7m³, and 2.8m³, covering the entire territory of Quebec. It is issued by the DGCGER under the Ministry of Transport of the Government of Canada and is open to suppliers across the province with performance expected in key regions including Laval, Montreal, Abitibi-Témiscamingue, Bas-Saint-Laurent, Capitale-Nationale, Centre-du-Québec, and Chaudière-Appalaches. The solicitation number is 20146470 and was posted on May 21, 2026, with a response deadline set for June 15, 2026, at 7:00 PM Eastern Time. The contract allows for multiple orders to be placed over its term, providing flexibility for departments to procure equipment as needed. The primary point of contact for inquiries is the Contracting Authority, reachable via email at Contrats_CGER@transports.gouv.qc.ca or by phone at 866-275-0241.

General Info

Command-based contract for wheeled loaders in Quebec, covering multiple regions, solicitation 20146470, response deadline June 15, 2026.

Agency

Government of Canada → DGCGER (Ministère des transports)View Agency

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

Laval, Montréal, Abitibi-Témiscamingue, Bas-Saint-Laurent, Capitale-Nationale (Québec), Centre-du-Québec, Chaudière-Appalaches,, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 21

Solicitation

Response DeadlineJun 15

Deadline has passed

Submission Closed

06/15/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → DGCGER (Ministère des transports)

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → DGCGER (Ministère des transports)

View Agency Profile

Office AddressN/A

Contacts

CGER CGERContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

Contrat à commande pour l'acquisition de chargeuses sur roues 2.3m3, 2.7m3 et 2.8m3 (Ensemble du territoire du Québec)