Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTROL, COMPUTER TERMI

Active
SPE4A7-26-T-613AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of two units of a computer terminal controlled under the part number EP-0031379 and NSN 5895017136646, with a total contract value of $4.00 at $2.00 per unit. The delivery is required within 171 days from the contract date, with a firm delivery deadline of May 21, 2027, and an intended ship date of January 31, 2027. Goods must be delivered FOB origin, inspected and accepted at destination, with zero tolerance for quantity variance. Packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and unit containment as defined by QUP 001, preservative method 10, and packing code U. Marking must comply with MIL-STD-129, with no special marking required. The item is subject to technical and quality requirements referenced in the DLA Master List, and sampling for acceptance follows MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels or AQLs as specified. All shipments must be palletized per DLA guidelines and addressed to the designated receiving warehouse in Tracy, California. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the unit of issue conforms to DoD standards with a corresponding ANSI X12 equivalence. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613A, managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Jamiah Sutton as the point of contact.

General Info

Two EP-0031379 terminals at $2.00 each, deliver by May 21, 2027, FOB origin, per MIL-STD and DLA specs.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-613A.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Jamiah Sutton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTROL,COMPUTER TERMINAL
CONTROL,COMPUTER TE
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
INDEPENDENT ROUGH TERRAIN CENTER LLC 1NWY2 P/N EP-0031379
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741391 0001 EA 2.000
NSN/MATERIAL:5895017136646
DELIVERY (IN DAYS):0171
SPE4A7-26-T-613A
SECTION B
PR: 7017741391 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/31/2027 Original Required Delivery Date:05/21/2027
SPE4A7-26-T-613A NSN/Part Number: 5895-01-713-6646 Quantity: 2 EA Purchase Request: 7017741391QTY: 2 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334290
New
DIBBS
DIVIDER, POWER, RADIO FR
Solicitation # SPE7M5-26-Q-0823
The contract pertains to the procurement of a DIVIDER, POWER, RADIO FR with the NSN/Part Number 5985-01-447-7780, requested in a single unit under Purchase Request 7017353472. The solicitation, identified by number SPE7M5-26-Q-0823, was posted on August 4, 2026, with a response deadline of August 10, 2026. It is issued by the Defense Logistics Agency under the Department of Defense as a federal procurement action with no specific set-aside designation. The item is for use in military radio systems, and the place of performance and delivery location are not specified beyond the United States. Interested parties must submit responses through the official DIBBS platform prior to the deadline to be considered for award.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334290
New
DIBBS
DETECTOR, RADIO FREQUEN
Solicitation # SPE7M1-26-Q-1319
The contract solicits 43 units of a radio frequency detector under NSN 1285-01-247-5149, with a delivery deadline 197 days after award, and is issued under solicitation number SPE7M1-26-Q-1319 with a response deadline of August 19, 2026. The procurement falls under NAICS code 334290 and is managed by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency. All technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item involves covered defense information and is subject to Cybersecurity Maturity Model Certification Level 2 compliance, requiring third-party assessment by a certified C3PAO. Technical data associated with this item is controlled under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce; access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA approval. Delivery is to New Cumberland, Pennsylvania, with primary point of contact Bernadine Davis-Sheets, and the solicitation is publicly accessible via the DIBBS platform.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
DIBBS
CONTROL-MONITOR
Solicitation # SPE4A6-26-T-12GJ
The contract pertains to the procurement of four units of a Critical Application Item, CONTROL-MONITOR, manufactured by THERMO EBERLINE LLC with part number 436001000 and NSN 5895017194735, under solicitation SPE4A6-26-T-12GJ. Delivery is required FOB origin within 171 days, with zero variance allowed in quantity and inspection and acceptance occurring at the manufacturer’s location. All packaging must comply with MIL-STD-2073-1E and palletization must adhere to DLA Packaging Requirements, with marking following MIL-STD-129 and no special marking codes applied. Sampling for quality verification must conform to MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. The contractor is responsible for meeting CMMC Level 2 Self-Assessment requirements and ensuring compliance with all referenced technical and quality provisions under the DLA Master List, including documentation for source approval, removal of government identification from non-accepted supplies, bare item marking, and inspection at origin. The item is subject to DoD unit of issue standards and must be delivered to the DLA Distribution Depot at Tinker AFB, Oklahoma, with the required ship date set for January 31, 2027, and the original delivery deadline at June 10, 2027. All transportation and shipping instructions must follow DLAD Procurement Notes C19 and C20, and the solicitation was issued by the ASC Commodities Division of the Department of Defense, with Emma Garrett as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-Q-0828
The contract pertains to the procurement of 262 units of a radio frequency interference filter with NSN 5915-00-865-7973 under solicitation SPE7M5-26-Q-0828, issued by the Department of Defense’s Active Devices Division. Delivery is required within 167 days of award, and all supplies must comply with DLA packaging standards and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified, and attributes must be verified at designated levels VII, IV, and II for critical, major, and minor characteristics respectively. Unspecified attributes default to major classification. The contractor must adhere to CMMC Level 2 self-assessment requirements and remove all government identification from non-accepted supplies. The place of performance is New Cumberland, PA, with Rosella Lynn as the primary point of contact for inquiries.
ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334290
New
Federal
WIND SENSING UNIT
Solicitation # N0010426QX114
The solicitation N0010426QX114 seeks the repair of five Wind Sensing Units (NIIN 015325726, NSN 5895-01-532-5726, Part No. 81164/0200.00) under a firm-fixed-price, not-to-exceed, or estimated price structure, with all repairs to be performed in accordance with the original manufacturer’s specifications, drawings, and the contractor’s established overhaul standards. Each repaired unit must meet operational and functional requirements and undergo Higher Inspection per MIL-I-45208, with all inspection and testing integrated into the contractor’s quality program. The contractor is responsible for conducting inspections at their facility, and final acceptance is also to occur at their location. The delivery term is FOB Destination, and all items must be uniquely identified with a UII compliant with MIL-STD-130 and labeled using machine-readable codes under MIL-STD-129. Packaging must adhere to best commercial practices for overseas shipment, and hazardous materials require labeling consistent with 29 CFR 1910.1200. The repair turnaround time is to be established by the offeror, and all units must be received by the contractor within 365 days of contract award, with late inductions requiring bilateral agreement. The contract incorporates a comprehensive suite of FAR and DFARS clauses addressing ethical, safety, cybersecurity, and compliance requirements, including prohibitions on kickbacks, external influence, and contracting with inverted domestic corporations or state sponsors of terrorism. Cybersecurity obligations are enforced through DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.204-7018 banning covered telecommunications equipment. Contractors must implement counterfeit electronic part detection systems under DFARS 252.246-7007 and comply with NIST SP 800-171 requirements. Reporting obligations extend to executive compensation, subcontract awards, employment data, and anti-trafficking measures. All payments are to be processed electronically via WAWF, with cost vouchers for labor-hour items and invoices with receiving reports for fixed-price line items. The solicitation is not a small business set-aside, and responses must be submitted electronically by 21 August 2026 to Sherry Kaylor at the designated
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in 17 days
View Details
NAICS: 334290
New
DIBBS
Commercial Off-the-Shelf (COTS) Display Unit SupplyThe contract calls for the procurement and delivery of four Commercial Off-the-Shelf display units with part number 998-4230-00 and NSN 5895-01-733-3331, manufactured by Planar Systems, Inc., to be provided as a complete, ready-to-deploy solution. These units are intended for immediate operational use without requiring additional customization or integration beyond standard deployment procedures. The requirement falls under NAICS code 334290, indicating a focus on other electronic component manufacturing, and is classified as a subcontract under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Deliveries must be fulfilled to the place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 3, 2026, with a response deadline set for August 11, 2026, allowing potential vendors a limited window to submit proposals. The contract is not subject to any specific set-aside classification, meaning all eligible contractors may respond regardless of business size or designation. The procurement is managed through the DIBBS platform, and all communications and submissions must be conducted through the official online portal linked in the solicitation. The units must meet all technical and logistical requirements for military deployment, including compatibility, durability, and supply chain traceability, as dictated by DoD standards for COTS equipment.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
ALARM-MONITOR
Solicitation # SPE4A6-26-T-11NE
The contract pertains to the procurement of two ALARM-MONITOR units under solicitation SPE4A6-26-T-11NE, with a total quantity of 2 units at a unit of issue of EA. Delivery is required within 25 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item, identified by NSN 6340014840342 and part number 9D-80310-29 from INNOVATIVE SOLUTIONS & SUPPORT INC, is classified as a critical application item with no shelf life requirement, and item unique identification is not mandated per the service customer’s request. All technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards. Packaging must comply with ASTM D3951 as supplemented by MIL-STD-129 marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0. The delivery destination is Tinker AFB, Oklahoma, with no quantity variance permitted. The solicitation is a total small business set-aside under NAICS code 334290, with a response deadline of August 11, 2026, and primary point of contact is Bernice Adams at DLA.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
CASE, ELECTRONIC COM
Solicitation # SPE4A7-26-T-607M
The contract solicitation SPE4A7-26-T-607M is for the procurement of one unit of a CASE, ELECTRONIC COM, identified by NSN 5895-01-701-4810 and part number BSMU-B-CASE-TAN-018, with a total contract value of $1.00. Delivery is required within 294 days of award, with a specified delivery date of June 2, 2027, and shipment must be made FOB origin. The item is to be delivered to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and both inspection and acceptance are to occur at the destination. The contractor must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to ASTM D3951 unless overridden by DLA requirements, with palletization following RP001 and all markings and labeling conforming to MIL-STD-129, including compliance with RQ017 for physical identification of bare items. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0, respectively. Unspecified attributes are treated as major. The contract includes mandatory FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous materials identification, cybersecurity safeguards, contracting changes, subcontracting, inspection, default, employment verification, export controls, electronic invoicing via WAWF, NIST SP 800-171 compliance, and prohibition of hexavalent chromium. The offeror must provide a Unique Entity Identifier and CAGE code, declare small business or socioeconomic status if applicable, and comply with all affirmative disclosure requirements for defense telecommunications equipment and joint venture participation. Invoicing must be submitted electronically through WAWF, and the contract contains no options or additional CLINs. All proposals must be submitted via the DLA Internet Bid Board System by August 11, 2026, with no physical submissions accepted.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
TRANSMITTER, TEMPERA
Solicitation # SPE4A6-26-Q-1252
This contract pertains to the procurement of two transmitter units, part number 6685-01-732-6391, designated as a critical application item from PYROMATION LLC, with a firm fixed price and no tolerance for quantity variance. Delivery is required within 115 days after award, with both inspection and acceptance occurring at the supplier’s origin. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization, with marking adhering to MIL-STD-129 and no special markings applied. The item must be palletized per DLA guidelines and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise specified. Documentation for source approval is governed by RC001, and government identification must be removed from non-accepted supplies per RQ011. The unit of issue complies with DoD standards, and transportation procedures follow DLAD procedural notes. The contract is linked to Purchase Request 7014171388 with a required ship date of October 15, 2025.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
HEAD, FLUID FILTER
Solicitation # SPE7LX-26-U-9210
The contract pertains to the procurement of one unit of a HEAD, FLUID FILTER, RECEIVER SUBASSEMBLY, RADAR with NSN 2940017027398 and part number 516-5903 REV 00 from CATERPILLAR INC 11083, issued under solicitation SPE7LX-26-U-9210 by the Defense Logistics Agency’s Strategic Acquisition Program Directorate. This is a sole-source, simplified acquisition structured as a unilateral indefinite-delivery contract with a total estimated value not exceeding $350,000 per order, though the actual order quantity is one estimated unit and may not be purchased by the IDC. Delivery is required within 130 days FOB Origin, with inspection and acceptance occurring at the destination point, and no variance is permitted in quantity. The item is designated as a critical application item, and applicable technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced under RA001. Packaging, preservation, and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, with a packaging code of U, preservation method 41 (cooling/drying), and no special marking or hazardous material handling beyond standard compliance. The contract mandates use of the Wide Area WorkFlow system for all invoicing and documentation, and requires compliance with DLA’s packaging requirements RP001 and palletization standards. The solicitation is a total small business set-aside under NAICS code 334290 and incorporates numerous FAR and DFARS clauses including those on employment equity, combating human trafficking, eligibility verification, sustainable products, hazardous material identification, authorization and consent for data rights, and safeguarding covered contractor information systems. Clause 52.227-1 Alternate I and Alternate II are both applied for intellectual property rights. Contractors must affirm their small business status and, if claimed, any socioeconomic designation including WOSB, SDVOSB, HUBZone, or 8(a) participation, and must provide UEI and CAGE codes for all entities involved. Hazardous materials, if any, require full compliance with OSHA’s Hazard Communication Standard, including submission of Safety Data Sheets prior to award and ongoing updates during performance. All submissions must be electronically delivered via DIBBS by August 18, 2026, and no paper or
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
DIBBS
DISPLAY UNIT
Solicitation # SPE4A7-26-T-607G
This contract outlines the procurement of a commercial off the shelf display unit identified by part number 998-4230-00 and NSN 5895-01-733-3331, with a total quantity of four units required. The item must be delivered FOB origin within 300 days of contract award, with no variance allowed in quantity and inspection and acceptance taking place at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and unit containerization, and all marking must follow MIL-STD-129 with no special markings required. Palletization is governed by DLA packaging requirements, and the delivery address is specified as the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each, with a unit price of $4.00 and a total contract value of $16.00. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. The contract requires adherence to DLA procurement procedures for transportation and freight, and the solicitation was issued under contract number SPE4A7-26-T-607G with a response deadline of August 11, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
PANEL, PATCHING, COMM
Solicitation # SPE4A7-26-T-607V
The contract pertains to the procurement of a single unit of a PANEL, PATCHING, COMM with NSN 5895-01-687-9082, issued under solicitation SPE4A7-26-T-607V by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination, the USS GEORGE WASHINGTON CVN 73 at FPO AP 96607. The item must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in packaging or preservation. The unit of issue is each, with zero variance allowed in quantity, and the contractor must use the approved DLA preservation methods including dry preservation, FAA wrap material, and box shipping containers. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The delivery deadline is February 2, 2026, and the contract includes specific transportation instructions tied to DLAD PROC NOTES C19 and C20. The point of contact for inquiries is James Sinks at james.sinks@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 493130
New
DIBBS
Warehousing and Storage of Finished Harness InventoryThe contract entails the secure, climate-controlled warehousing and inventory management of finished oxygen cylinder carrying harnesses, ensuring all items are stored under strict environmental controls to maintain product integrity until authorized government shipment. Full traceability of inventory is required at every stage, with comprehensive documentation and audit-ready systems in place to support governmental compliance and accountability. The storage facility must support accurate real-time tracking, inventory reconciliation, and controlled access protocols to prevent loss, damage, or unauthorized handling. This is a total small business set-aside subcontract classified under NAICS code 493130, designated for businesses certified under the SBA program, and issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 4, 2026, with responses due by September 3, 2026. While specific performance location details are not provided, the contractor is expected to comply with all federal contract requirements including security standards, supply chain integrity, and timely delivery readiness for government distribution. All operations must align with Department of Defense logistics protocols and maintain unwavering readiness for inspection and audit.
Farm Product Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Transportation of Finished HarnessesThe contract entails the transportation and delivery of finished oxygen cylinder carrying harnesses from the manufacturing site to designated government locations, requiring full compliance with Department of Defense shipping standards. All logistics operations must adhere to stringent military transportation protocols to ensure the safe and timely movement of these critical medical equipment components. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 484220 specifically identifies this as a heavy and tractor-trailer trucking service. The solicitation was posted on August 4, 2026, with responses due by September 3, 2026, and the overseeing agency is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to occur at unspecified government destinations, and all shipments must meet DoD requirements for handling, tracking, and documentation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 423220
New
DIBBS
Wholesale Supply of Tactical Harness Hardware and ComponentsThe contract solicits the wholesale supply of certified buckles, fasteners, and other hardware components critical to the assembly of oxygen cylinder carrying harnesses, requiring full traceability and documented compliance with military-grade standards. All items must meet precise technical specifications to ensure reliability and safety in tactical and emergency medical applications, with rigorous quality control processes enforced throughout production and delivery. The award will be made under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the SBA, and is classified under NAICS code 423220 for merchant wholesalers of hardware and plumbing and heating equipment. The opportunity is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV and is issued as a subcontract, indicating it supports a larger procurement program. Responses are due by September 3, 2026, with the solicitation posted on August 4, 2026. Performance locations are not specified, suggesting the components may be delivered to multiple DoD sites or integrated into broader logistics networks. All suppliers must provide complete documentation to ensure end-to-end traceability of materials and manufacturing processes, enabling compliance with defense supply chain security protocols and regulatory requirements.
Home Furnishing Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332996
New
DIBBS
Metal Buckles and Hardware Supply for Tactical HarnessesThe contract seeks the manufacture and supply of corrosion-resistant, high-strength metal buckles and plated hardware components designed for use in life-support carrying harnesses, with all items required to meet rigorous military specifications. These components are critical to the integrity and reliability of tactical harness systems, demanding precision engineering and materials capable of withstanding extreme environmental and operational stresses. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The solicitation, identified under NAICS code 332996 for Other Fabricated Metal Product Manufacturing, was posted on August 4, 2026, with a response deadline of September 3, 2026. It is managed by the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense, and performance will occur at an unspecified location. All submissions must align with the technical, quality, and delivery requirements inherent to military-grade life-support equipment, and bidders are expected to demonstrate capable production infrastructure, compliance with defense standards, and a clear pathway to consistent, on-time delivery. Interested parties must access the full solicitation through the provided DIBBS link to understand full technical specifications and submission protocols.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 315990
New
DIBBS
Supply of Raw Materials and Components for Harness AssemblyThe contract entails the supply of military-grade webbing, straps, padding, and thread specifically engineered for the assembly of oxygen cylinder carrying harnesses, with stringent requirements for full traceability and adherence to defense specifications. All materials must meet exacting performance and durability standards required for mission-critical defense applications, ensuring reliability under extreme operational conditions. The subcontract is issued as a total small business set-aside under the SBA program, reserved exclusively for small businesses certified to fulfill federal contracting obligations under FAR 19.5, with the NAICS code 315990 classifying the work within the other textile product mills category. Responses are due by September 3, 2026, with the solicitation posted on August 4, 2026, under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The performance location is not specified beyond agency oversight, and the contract is managed through the DLA Dibbs system with the solicitation number SPE4A726R0710. Bidders must demonstrate capability to deliver compliant materials with documented chain-of-custody and quality control processes aligned with defense supply chain integrity requirements. Successful vendors will support logistics and life-safety systems essential to military operations, emphasizing quality, compliance, and timely delivery without deviation from technical specifications.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 339920
New
DIBBS
Manufacturing of Oxygen Cylinder Carrying HarnessesThe contract encompasses the manufacture, quality assurance, packaging, and delivery of Oxygen Cylinder Carrying Harnesses identified by National Stock Number 005712239, a life support item critical to mission-critical operations. Strict quality control and full traceability requirements are mandated due to the item’s essential role in medical and emergency support systems, demanding rigorous adherence to established standards throughout all production phases. The manufacturing process must ensure durability, reliability, and compliance with all applicable military specifications, with each unit subjected to thorough inspection and documentation to guarantee performance under demanding conditions. This acquisition is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualify to respond, as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code 339920 indicates the work falls under Other Miscellaneous Manufacturing, aligning the scope with specialized fabrication of non-electronic medical or safety equipment. The solicitation was posted on August 4, 2026, with a response deadline set for September 3, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to occur under the oversight of this agency, with no specific location designated, allowing flexibility for qualified small businesses to fulfill the requirement while maintaining full compliance with federal defense procurement protocols.
Sporting and Athletic Goods Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 488510
New
DIBBS
Logistics and Packaging for Defense ShipmentsThe contract seeks qualified small businesses to develop and execute military-compliant packaging and shipping plans tailored for defense shipments, ensuring full adherence to DFARS freight requirements. This includes the accurate collection and submission of dimensional and weight data essential for precise transport cost modeling, which directly impacts logistics efficiency and compliance across the Department of Defense supply chain. All proposed solutions must meet strict military standards for protection, labeling, and handling during transit, with a focus on minimizing damage and ensuring timely delivery under operational conditions. This is a total small business set-aside under NAICS code 488510, exclusively reserved for small businesses as defined by the SBA, and is issued as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense. Interested parties must submit their proposals by the deadline of September 3, 2026, with the requirement to demonstrate proven experience in defense logistics, packaging certification, and compliance with federal regulations governing military transport. Performance is expected to align with DoD logistics protocols, though no specific location is designated for performance. Bidders are directed to the official DIBBS portal for full solicitation details and submission guidelines.
Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC Assessment SupportThis contract solicits support services to enable defense contractors to achieve CMMC Level 2 compliance by implementing the controls outlined in NIST SP 800-171, conducting comprehensive system assessments, and preparing accurate SPRS reports for Controlled Unclassified Information environments. The work is targeted at small businesses, as the procurement is set aside entirely for small business participation under SBA guidelines, and is classified under NAICS code 541512 for computer systems design services. The services must be delivered to ensure full alignment with Department of Defense cybersecurity requirements for handling sensitive government data, with an emphasis on documentation, validation, and continuous compliance readiness. The contract is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and is structured as a subcontract, indicating it supports a larger prime contracting effort. Interested parties must submit responses by September 3, 2026, and all activities will be performed in support of government contracts handling Controlled Unclassified Information. The solicitation is publicly accessible via the DIBBS portal, and while the place of performance and point of contact are not specified, the nature of the work requires close coordination with federal defense contractors across multiple locations to facilitate assessment, implementation, and reporting activities on-site or remotely as needed.
Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 331110
New
DIBBS
Specialty Metal Supply for Defense ComponentsThe contract entails the supply of DFARS-compliant specialty metals, specifically high-strength alloys, designated for use in manufacturing military-grade microphone brackets. All materials must adhere to strict domestic sourcing requirements and maintain full traceability from origin through final delivery to ensure compliance with defense regulations. The procurement is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 331110 indicating primary focus on steel manufacturing. The solicitation was posted on August 4, 2026, and responses are due by September 3, 2026, with performance tied to the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. While specific delivery locations and points of contact are not listed, the requirement mandates adherence to all applicable federal acquisition regulations regarding material origin, quality assurance, and documentation.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332999
New
DIBBS
Precision Machining and Fabrication of Microphone BracketThe contract calls for the precision machining and fabrication of a microphone bracket designed specifically for military communication systems, requiring adherence to Critical Application Item standards that ensure uninterrupted performance under extreme operational conditions. The component must meet stringent requirements for reliability, durability, and environmental resilience, with manufacturing processes subject to rigorous quality control to support mission-critical applications in defense environments. All work must be performed by a small business as this is a Total Small Business Set-Aside under SBA guidelines, with the North American Industry Classification System code 332999 indicating it falls under miscellaneous fabricated metal product manufacturing. The solicitation was posted on August 4, 2026, with proposals due by September 3, 2026, and is issued under the Department of Defense through the ASC Supplier Oper AE and AF Division. The place of performance and office address details are not provided, but performance is expected to align with defense logistics and supply chain expectations for the U.S. military. Bidders must demonstrate proven capability in high-precision metal fabrication, quality assurance protocols, and experience supplying components for military systems, as failure to meet specifications could compromise communication effectiveness in the field. All interested parties must submit responses through the designated DIBBS portal by the stated deadline.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-611K
The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details