Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

CONTROL ANTENNA

Active
70Z08026QDI040Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The United States Coast Guard Surface Forces Logistics Center is soliciting two units of a control antenna with NSN 5985-01-615-4612, manufactured by Trivec-Avant Corp under part number AV 2098-159. Each unit must be equipped with electrostatic protection in accordance with Type III, Class I of MIL-B-81705E, Amendment 1 dated 02/08/2010, if applicable. Items must be individually packaged per MIL-STD-2073-1E with Change 17, Method 10, ASTM-D-3951-10, and SFLC SP-PP&M-001 dated 06/06/11, and individually marked according to MIL-STD-129P with Change 4 and the same SFLC directive. Bar coding is required if feasible, complying with SFLC SP-PP&M-001. Delivery must be F.O.B. destination to the USCG Surface Forces Logistics Center in Baltimore, Maryland, no later than September 10, 2026. This is a commercial item solicitation under FAR Subpart 12.6 using simplified acquisition procedures, with a NAICS code of 334290 and a small business size standard of 750 employees. Quotations must be submitted via email to Nina Crosby by 12:00 PM Eastern Standard Time on August 7, 2026. All submitter must possess a valid DUNS number, be registered in SAM, and provide their Tax Information Number. Offerors must complete FAR 52.212-3 and affirm their status regarding foreign incorporation and inverted domestic corporation status as defined by HSAR. The contract incorporates numerous FAR clauses including Buy American Act, Equal Opportunity, Child Labor, and Electronic Funds Transfer requirements, as well as CGAP 3042.302-90 for valuation of spare parts.

General Info

USCG seeks two electrostatic-protected antennas delivered to Baltimore by Sept 10, 2026, under commercial solicitation.

Agency

Department Of Homeland Security → Sflc Procurement Branch 1(00080)View Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

VA, USA

Set-Aside

NONE

Documents

(2)

U.S. Coast Guard Justification for Other Than Full and Open Competition for Control Antenna Purchase

PDFjustification-and-authorization

MIL-STD-2073-1E Military Packaging Standard Practice Guide March 2014

PDFspecifications

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 1(00080)
Contacts1 person available
OfficeNORFOLK, VA, 23510, USA
Organization / Agency
Department Of Homeland Security → Sflc Procurement Branch 1(00080)
View Agency Profile
Office AddressNORFOLK, VA, 23510, USA

Full Description

Show more

//The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following





1.NSN: 5985 01 615 4612



QTY: 2 ea



Control, antenna




MFG NAME:TRIVEC-AVANT CORP  


PART_NUMBER#AV 2098-159



EACH UNIT TO HAVE ELECTROSTATIC PROTECTION IAW


TYPE III,


CLASS I OF MIL-B-81705E


W_AMENDMENT 1 DTD 02/08/2010, IF REQUIRED.


EACH ITEM TO BE INDIVIDUALLY PACKAGED IAW THE


FOLLOWING:


MIL-STD-2073-1E W/CHANGE 17, METHOD 10


ASTM-D-3951-10


SFLC SP-PP&M-001 DTD 06/06/11


EACH ITEM TO BE INDIVIDUALLY MARKED IAW THE


FOLLOWING:


MIL-STD-129P W/CHANGE 4


SFLC SP-PP&M-001 DTD 06/06/11


BAR CODING REQUIRED, IF CAPABLE, TO COMPLY WITH


THE


FOLLOWING:


SFLC SP-PP&M-001 DTD 06/06/11




Delivery shall be F.O.B. DESTINATION to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21226


Required delivery date no later than:  9/10/26




This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2025-06 and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this  solicitation is 334290and the business size standard is 750. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13
All responsible sources may submit a quotation via email to Nina.m.crosby@uscg.mil, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (SAM) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is 8/7/26 12 PM  Eastern Standard Time



OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE:


Disclosure: The offeror under this solicitation represents that [Check one]:
__ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73;
__ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or
__it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal.


(End of provision)


The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (nov 2023); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (FEB 2023) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote.


The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (dec 2023); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (dec 2023). The following clauses listed within FAR 52.212-5 are applicable: FAR 52.219-6 Notice of Total Small Business Set-Aside (Nov 2020)(15 U.S.C. 644), FAR 52.219-28, Post Award Small Business Program representation (oct2022)(15 U.S.C. 632(a)(2); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Feb  2016) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (April 2015); FAR 52.222-26, Equal Opportunity (April 2015)(E.O. 11246); FAR 52.222-36, Equal Opportunity for workers with disabilities (July 2014); FAR 52.223-18 Contractor Policy to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513); FAR 52.225.1 Buy American Act-Supplies (May 2014); FAR 52.225-3, Buy American Act-Free Trade Agreement (dec 2022)(41 U.S.C. 10a-10d); FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008); 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (July 2013)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov.


CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf


Similar Contracts

Same NAICS industry code

NAICS: 334290
New
DIBBS
CONTROL, COMPUTER TERMI
Solicitation # SPE4A7-26-T-613A
This contract pertains to the procurement of two units of a computer terminal controlled under the part number EP-0031379 and NSN 5895017136646, with a total contract value of $4.00 at $2.00 per unit. The delivery is required within 171 days from the contract date, with a firm delivery deadline of May 21, 2027, and an intended ship date of January 31, 2027. Goods must be delivered FOB origin, inspected and accepted at destination, with zero tolerance for quantity variance. Packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and unit containment as defined by QUP 001, preservative method 10, and packing code U. Marking must comply with MIL-STD-129, with no special marking required. The item is subject to technical and quality requirements referenced in the DLA Master List, and sampling for acceptance follows MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels or AQLs as specified. All shipments must be palletized per DLA guidelines and addressed to the designated receiving warehouse in Tracy, California. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the unit of issue conforms to DoD standards with a corresponding ANSI X12 equivalence. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613A, managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Jamiah Sutton as the point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
DETECTOR, RADIO FREQUEN
Solicitation # SPE7M1-26-Q-1319
The contract solicits 43 units of a radio frequency detector under NSN 1285-01-247-5149, with a delivery deadline 197 days after award, and is issued under solicitation number SPE7M1-26-Q-1319 with a response deadline of August 19, 2026. The procurement falls under NAICS code 334290 and is managed by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency. All technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item involves covered defense information and is subject to Cybersecurity Maturity Model Certification Level 2 compliance, requiring third-party assessment by a certified C3PAO. Technical data associated with this item is controlled under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce; access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA approval. Delivery is to New Cumberland, Pennsylvania, with primary point of contact Bernadine Davis-Sheets, and the solicitation is publicly accessible via the DIBBS platform.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
DIBBS
CONTROL-MONITOR
Solicitation # SPE4A6-26-T-12GJ
The contract pertains to the procurement of four units of a Critical Application Item, CONTROL-MONITOR, manufactured by THERMO EBERLINE LLC with part number 436001000 and NSN 5895017194735, under solicitation SPE4A6-26-T-12GJ. Delivery is required FOB origin within 171 days, with zero variance allowed in quantity and inspection and acceptance occurring at the manufacturer’s location. All packaging must comply with MIL-STD-2073-1E and palletization must adhere to DLA Packaging Requirements, with marking following MIL-STD-129 and no special marking codes applied. Sampling for quality verification must conform to MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. The contractor is responsible for meeting CMMC Level 2 Self-Assessment requirements and ensuring compliance with all referenced technical and quality provisions under the DLA Master List, including documentation for source approval, removal of government identification from non-accepted supplies, bare item marking, and inspection at origin. The item is subject to DoD unit of issue standards and must be delivered to the DLA Distribution Depot at Tinker AFB, Oklahoma, with the required ship date set for January 31, 2027, and the original delivery deadline at June 10, 2027. All transportation and shipping instructions must follow DLAD Procurement Notes C19 and C20, and the solicitation was issued by the ASC Commodities Division of the Department of Defense, with Emma Garrett as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
AMPLIFIER, AUDIO FREQUE
Solicitation # SPE7M1-26-U-5036
The contract is for the procurement of 66 units of an audio frequency amplifier identified by NSN 5996-01-508-2467 under solicitation SPE7M1-26-U-5036, with a total small business set-aside designation. Delivery is required within 41 days of award, and responses must be submitted by August 19, 2026, with the solicitation posted on August 4, 2026. The procurement falls under NAICS code 334290 and is managed by the Department of Defense’s Maritime Supply Chain. All supplies must comply with DLA packaging requirements and technical and quality specifications referenced from the DLA Master List, where applicable revisions are determined by the solicitation issue date or any subsequent amendment. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware except in specific exempted applications such as batteries, fluorescent lights, instrument sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable devices containing mercury must be shockproof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. The alternate offeror must provide a complete data package covering both the approved and alternate parts, as no data is currently available for review. Primary point of contact is Bryan Fair, reachable via email and phone provided in the contract details.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
Federal
Temperature Monitoring System
Solicitation # 12639526Q0199SSN
The U.S. Department of Agriculture’s National Centers for Animal Health is seeking information from small business contractors capable of providing a comprehensive Temperature Monitoring System to oversee critical laboratory environments across its 520-acre campus. The system must support 1,150 temperature probes installed on ultra-low temperature units, refrigerators, freezers, incubators, water baths, CO2 monitors, humidity sensors, and liquid nitrogen tanks, with a cellular transmission network capable of penetrating concrete walls and reliably covering the entire facility. The contractor must also deliver system training, ongoing oversight, preventive maintenance, operational verification, testing, and calibration services post-installation. Only small businesses certified under NAICS code 334290 with fewer than 800 employees are eligible to respond; non-compliant organizations are excluded. This notice serves solely as market research under FAR Part 10, with no obligation on the government to issue a solicitation, award a contract, or reimburse any costs incurred by respondents. Responses are voluntary but may directly influence the procurement strategy, including potential small business set-asides or full and open competition. Submissions must be emailed to Jason L. Wilking by August 10, 2026, at 11 a.m. CDT, and must include company name, point of contact, SAM Unique Entity ID, and relevant system details. No questions will be entertained, and responses to this notice do not qualify any firm for future solicitations, which must be addressed separately if issued.
Mrpbs Minneapolis Mn

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 334290
New
Federal
CONTROL, TRANSMITTER
Solicitation # SPE4A7-26-R-0750
The Defense Logistics Agency is conducting market research to identify qualified sources capable of manufacturing the CONTROL, TRANSMITTER with NSN 5855-01-222-6240 and part number CSA-947280, for an estimated requirement of 62 units. The requirement calls for full new manufacture including procurement of component parts, inspection, testing, preservation, packaging, shipping, and management of supply chain challenges such as diminishing manufacturing sources, material shortages, and long-lead parts. The NAICS code 334290 applies, and while TELEDYNE DEFENSE ELECTRONICS is the current approved supplier, the government is evaluating whether to set aside the requirement for small businesses or proceed with full and open competition, potentially making multiple awards. No solicitation exists at this time, and submissions are voluntary with no financial liability assumed by the government. Respondents must demonstrate organizational capacity, technical and financial resources, proven project management practices, and ability to meet performance-based service acquisition standards, including schedule adherence, cost control, and risk mitigation. Interested parties must submit detailed capability statements including company information, ownership structure, and supporting documentation on personnel, infrastructure, and any proposed subcontracting or teaming arrangements. Technical orders and qualification requirements are not available, and no drawings are provided. Responses must be sent via email to Michelle R Scott at michelle.r.scott@dla.mil no later than August 11, 2026. Telephone inquiries will not be accepted, and no feedback or evaluations will be provided to responders. The agency is seeking information solely to determine procurement strategy, and the final contract award, including unit pricing, will be determined after this market research phase.
DLA Aviation

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
Federal
Visitor Control Center (VCC) Cameras, Travis AFB, CA
Solicitation # FA442726QZ069
The 60th Security Forces Squadron at Travis Air Force Base is preparing to procure a fully integrated IP-based CCTV system for the Visitor Control Center in Building 615, with a required completion timeline of 210 days after award. The system will include six Bosch cameras—four exterior Pan/Tilt/Zoom units for 360-degree coverage and two interior ceiling-mounted units—along with all associated hardware, cabling, and software necessary for seamless operation. A non-negotiable requirement is full integration with the existing proprietary Integrated Base Defense Security System, which is exclusively provided and maintained by Advantor Systems II LLC. The contractor must deliver as-built documentation, comprehensive user manuals, and conduct on-site operational training for up to ten government personnel. This acquisition is being conducted as a noncompetitive, sole-source procurement due to the proprietary nature of the Advantor system, with only authorized providers of Advantor equipment eligible to respond. The Government intends to issue a Request for Quotation and award a firm-fixed-price purchase order based on technical capability and price, with an anticipated award date of September 1, 2026. All potential respondents must submit a capability statement proving their authorization as an Advantor Systems provider and installer, as no alternative solutions can interface with the existing infrastructure. While this is currently a pre-solicitation notice and not an invitation for offers, interested parties must respond by the August 19, 2026 deadline to provide input and confirm their ability to meet the unique technical and integration demands. The procurement is classified under NAICS code 334290 and is being managed by the Department of Defense office located at Travis AFB, California, with primary point of contact Don Salgado overseeing the process.
FA4427 60 Cons Lgc

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
Federal
WIND SENSING UNIT
Solicitation # N0010426QX114
The solicitation N0010426QX114 seeks the repair of five Wind Sensing Units (NIIN 015325726, NSN 5895-01-532-5726, Part No. 81164/0200.00) under a firm-fixed-price, not-to-exceed, or estimated price structure, with all repairs to be performed in accordance with the original manufacturer’s specifications, drawings, and the contractor’s established overhaul standards. Each repaired unit must meet operational and functional requirements and undergo Higher Inspection per MIL-I-45208, with all inspection and testing integrated into the contractor’s quality program. The contractor is responsible for conducting inspections at their facility, and final acceptance is also to occur at their location. The delivery term is FOB Destination, and all items must be uniquely identified with a UII compliant with MIL-STD-130 and labeled using machine-readable codes under MIL-STD-129. Packaging must adhere to best commercial practices for overseas shipment, and hazardous materials require labeling consistent with 29 CFR 1910.1200. The repair turnaround time is to be established by the offeror, and all units must be received by the contractor within 365 days of contract award, with late inductions requiring bilateral agreement. The contract incorporates a comprehensive suite of FAR and DFARS clauses addressing ethical, safety, cybersecurity, and compliance requirements, including prohibitions on kickbacks, external influence, and contracting with inverted domestic corporations or state sponsors of terrorism. Cybersecurity obligations are enforced through DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.204-7018 banning covered telecommunications equipment. Contractors must implement counterfeit electronic part detection systems under DFARS 252.246-7007 and comply with NIST SP 800-171 requirements. Reporting obligations extend to executive compensation, subcontract awards, employment data, and anti-trafficking measures. All payments are to be processed electronically via WAWF, with cost vouchers for labor-hour items and invoices with receiving reports for fixed-price line items. The solicitation is not a small business set-aside, and responses must be submitted electronically by 21 August 2026 to Sherry Kaylor at the designated
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 334290
New
DIBBS
Commercial Off-the-Shelf (COTS) Display Unit SupplyThe contract calls for the procurement and delivery of four Commercial Off-the-Shelf display units with part number 998-4230-00 and NSN 5895-01-733-3331, manufactured by Planar Systems, Inc., to be provided as a complete, ready-to-deploy solution. These units are intended for immediate operational use without requiring additional customization or integration beyond standard deployment procedures. The requirement falls under NAICS code 334290, indicating a focus on other electronic component manufacturing, and is classified as a subcontract under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Deliveries must be fulfilled to the place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 3, 2026, with a response deadline set for August 11, 2026, allowing potential vendors a limited window to submit proposals. The contract is not subject to any specific set-aside classification, meaning all eligible contractors may respond regardless of business size or designation. The procurement is managed through the DIBBS platform, and all communications and submissions must be conducted through the official online portal linked in the solicitation. The units must meet all technical and logistical requirements for military deployment, including compatibility, durability, and supply chain traceability, as dictated by DoD standards for COTS equipment.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 1(00080)

Same awarding agency

NAICS: 3342
New
Federal
INTERCOMMUNICATION STATION
Solicitation # 70Z08026QRN062
The United States Coast Guard is soliciting quotations for five Intercommunication Stations, part number LS-518A/SIC, under a combined synopsis/solicitation issued as a commercial item in accordance with FAR Subpart 12.6. The requirement is for a Firm Fixed Price contract to be awarded on a lowest price technically acceptable basis, with an all-or-nothing award decision. The item is managed under National Stock Number 5830-01-018-1202 and is subject to MIL-STD-2073 IE Method 41 packaging standards, which must be strictly adhered to—failure to meet these packaging requirements will result in rejection of the quote. The North American Industry Classification System code is 333998, and the procurement is a total small business set-aside, meaning only small business concerns may compete, with no price evaluation preference for HUBZone or other designated categories unless specifically waived by the offeror. All offerors must be registered in SAM, possess a valid DUNS number, provide their Taxpayer Identification Number, and submit a completed FAR 52.212-3 form along with their quotation. Proposals must be emailed to Eric.I.Goldstein@uscg.mil by 9:00 AM Eastern Standard Time on August 11, 2026, and delivered to 2401 Hawkins Point Road, Baltimore, MD, 21226. The solicitation incorporates numerous FAR clauses related to ethics, equal opportunity, labor standards, cybersecurity, trafficking in persons, Buy American provisions, foreign purchase restrictions, payment methods, privacy, and supply chain security, including mandatory flow-down requirements to subcontractors for key compliance areas such as whistleblower protections, equal opportunity, and anti-trafficking policies. Offerors must also affirm their status regarding inverted domestic corporations and comply with all applicable laws and executive orders referenced in the contract clauses.
Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
Federal
52000QR260026976- CGC Earl Cunningham and CGC Frederick Mann Underwater Hull Inspect, Clean & Zinc Renewal
Solicitation # 52000QR260026976
The U.S. Coast Guard Surface Force Logistics Center is soliciting firm-fixed price quotations under solicitation number 52000QR260026976 for underwater hull inspection, cleaning, and zinc anode renewal services for the CGC Earl Cunningham and CGC Frederick Mann, with performance strictly limited to two designated windows: August 10–14, 2026, for the Earl Cunningham and August 17–21, 2026, for the Frederick Mann at USCG Base Kodiak, Alaska. This procurement is a total small business set-aside under NAICS code 336611, processed under FAR Part 12 as a commercial services acquisition using simplified acquisition procedures outlined in FAR Part 13. The solicitation was reopened via amendment to resolve a critical discrepancy between conflicting submission deadlines cited in the original notice, with the final closing time firmly established as 10:00 a.m. Eastern Standard Time on August 6, 2026. All proposals must be submitted via email to Cornelius Claiborne and carbon copied to Karla Balint, and must include a detailed cost breakdown, unit and total pricing, payment terms, discount for prompt payment, and the vendor’s Unique Entity ID and CAGE code, all on official company letterhead. Vendors must maintain an active SAM.gov registration with a current UEI prior to submission, as required by FAR 52.204-7 and FAR 52.212-3, and complete all applicable representations and certifications electronically through SAM.gov. The work requires certified divers and a tender team operating in compliance with 29 CFR Part 1910, Subpart T, with mixed-gas diving and live boating strictly prohibited. Contractors must adhere to Coast Guard Maintenance Procedure Codes B10015.D and B10018.D for hull inspection and anode replacement, respectively, and utilize the specified Coast Guard drawings and SFLC Std Spec 0000 for technical guidance. Performance includes full underwater hull inspection for structural anomalies, removal of marine growth and contaminants, replacement of zinc anodes including twelve additional stern tube anodes not previously documented, and delivery of written and audio-video reports with narration and photographic evidence within 24 hours after work completion. All video reports must be submitted on two DVDs formatted to USCG specifications. The Government retains the right to award on an all-or-none basis
Ship Building and Repairing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333998
New
Federal
TRANSMITTER,PRESSURE
Solicitation # 70z08026QDE027
The U.S. Coast Guard Surface Forces Logistics Center is soliciting bids for 20 pressure transmitters, part number 0025353231, manufactured by Rolls-Royce Solutions GmbH, for use on 87 WPB vessels. The items must be sourced as brand name products, with no substitutions allowed unless they meet all salient physical, functional, and performance characteristics and are approved by the Coast Guard. Each transmitter must be individually packaged in compliance with MIL-STD-2073-1E Method 10 and marked according to MIL-STD-129R, using ISO/IEC-16388-2007 Code 39 symbology for barcoding; failure to comply will result in rejection and return of the shipment. The solicitation is issued under FAR Subpart 12.6 as a commercial item acquisition using simplified acquisition procedures, with award based on the lowest price technically acceptable model under a firm fixed price contract. Delivery is required to 2401 Hawkins Point Road, Baltimore, MD, 21226. Vendors must be registered in SAM, possess a valid DUNS number, provide their Tax Identification Number, and submit quotes via email to Eric.I.Goldstein@uscg.mil by August 11, 2026, at 9:00 AM Eastern Standard Time. All quotes must include a completed FAR 52.212-3 form and a disclosure regarding inverted domestic corporation status. The contract incorporates numerous FAR clauses related to ethics, labor standards, equal opportunity, anti-trafficking, Buy American, export controls, cybersecurity, and supply chain security. Of particular note, clauses prohibiting contracting with Kaspersky, ByteDance, and certain foreign entities, along with requirements for electronic funds transfer and compliance with human rights and labor protections, are binding. The set-aside designation is for total small business, and a HUBZone price evaluation preference applies. Vendors must explicitly confirm their ability to meet the mandatory packaging and marking requirements; standard commercial packaging is unacceptable. The NAICS code is 333998, and the small business size standard is 500 employees.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
Federal
SHAFT SEAL REPLACEMENT
Solicitation # 70Z08026QCV127
The United States Coast Guard Surface Forces Logistics Center is seeking quotations for 12 shaft seal replacements identified by NSN 5330-01-618-5248, manufactured by Defense Maritime Solutions, Inc. with part number H32040-01/8. Each item must be packaged in either an ASTM-D6251 Type III, Class 1 wood-cleated panelboard shipping box or an ASTM-D6880 Class 2 heavy-duty screwed wooden box, with all packaging labeled in accordance with MIL-STD-129R, excluding barcodes, which must conform to ISO/IEC-16388-2007 using Code 39 symbology. All items are subject to inspection upon arrival at the Coast Guard warehouse in Baltimore, Maryland. Delivery must be F.O.B. destination to 2401 Hawkins Point Road, Baltimore MD 21226, with a mandatory delivery date no later than September 10, 2026. This solicitation is issued as a combined synopsis and request for quotations under FAR Subpart 12.6 using simplified acquisition procedures, with a NAICS code of 339991 and a small business size standard of 750 employees. Proposals must be submitted via email to Nina M. Crosby by 12 PM Eastern Standard Time on August 6, 2026. Bidders must hold a valid DUNS number, be registered in SAM, and provide their Tax Information Number. Offerors are required to complete and submit FAR 52.212-3 and must disclose whether they are an inverted domestic corporation under HSAR 48 CFR 3009.104-70 through 73, with appropriate waiver documentation if applicable. The contract will be awarded to responsible sources meeting all technical, packaging, and regulatory requirements, and incorporates clauses related to the Buy American Act, equal opportunity, child labor prohibitions, electronic funds transfer, and restrictions on foreign purchases. Additional requirements include compliance with CGAP 3042.302-90 for valuation of spare parts.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 336611
New
Federal
DOCKSIDE (DS): CGC BEAR AA FY27
Solicitation # 70Z08026QMECP0025
The contract for USCGC BEAR (WMEC-901) Aviation Availability FY27 is a Firm Fixed Price solicitation issued as a Request for Quotations under a Total Small Business Set-Aside, targeting qualified small businesses to perform comprehensive aviation maintenance services aboard the vessel at its homeport in Portsmouth, Virginia. The period of performance is narrowly defined from January 5, 2027, to February 3, 2027, requiring the contractor to furnish all labor, materials, equipment, and services necessary to execute specified tasks in strict compliance with the SFLC Std Spec 0000 and other referenced standards, including NAVSEA Drawing 804-1213717 for helicopter tie-down fitting renewal at two precise locations on the flight deck. The scope includes critical deliverables such as a detailed Planning Document with graphical representations and milestone timelines, a Production Schedule due within three working days of vessel arrival, and multiple Critical Inspection Reports, particularly for substrate inspections, all governed by rigorous quality assurance protocols requiring the use of QA-3a and QA-4 forms for surface profile and salt conductivity testing. The contractor must adhere to stringent safety standards under OSHA Title 29 Part 1915, comply with DHS information security policies including MD 11042.1 for FOUO data and FIPS 140-2 encryption requirements, and implement protective measures for all vessel components and systems susceptible to interference from structural elements like insulation, ductwork, and electrical wiring. The award evaluation process prioritizes technical capability and past performance as significantly more important than price, with a best value tradeoff approach determining selection; however, price becomes controlling if offers are substantially equal in technical and performance merit. Invoicing must be conducted exclusively through the Invoice Processing Platform (IPP), with no invoice submission permitted until at least 25% of a CLIN is complete unless waived by the Contracting Officer, and 10% of the total contract value will be withheld until all deliverables are formally accepted. The contractor must maintain active SAM registration with a valid UEI and CAGE code throughout performance, submit signed DHS Non-Disclosure Agreements for all personnel handling sensitive information within two days of execution, and ensure no Sensitive Personally Identifiable Information is stored in billing systems. Proposals must be structured in four clearly delimited volumes with strict page limits and formatting rules: Volume I (Technical Capability, 15 pages), Volume II (Experience
Ship Building and Repairing

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
Federal
VALVE SAFETY RELIEF
Solicitation # 70Z08026QAJ042
The United States Coast Guard Surface Forces Logistics Center is soliciting quotations for two specialized safety relief valves essential to the 154 FRC ships’ service air system. Both valves, manufactured by Taylor Valve Technology, are identical in construction—stainless steel bodies with 316SS seat frames, 17-7SS springs, and Viton O-rings—differing only in pressure settings: one rated for 150 PSI and the other for 35 PSI, each with a 1/2” MNPT inlet and 1” FNPT outlet and a D-orifice design. Ten units of each valve are required, identified by their respective part numbers 825D3041831-150 and 825D1041831-35. Strict packaging requirements mandate that each valve be individually packaged per MIL-STD-2073-1E Method 10, cushioned and enclosed in ASTM-D5118 double-wall fiberboard boxes, with all external markings compliant with MIL-STD-129R and barcoded using ISO/IEC-16388-2007 Code 39 symbology. Commercial packaging is unacceptable, and failure to comply will result in rejection and return of the goods. Vendors may use third-party packaging services if needed, but must include associated costs in their quotations. The solicitation is issued under simplified acquisition procedures as a firm fixed price contract with an award based on lowest price technically acceptable. All submissions must originate from vendors registered in SAM.gov with a valid DUNS number and tax information provided. The NAICS code is 332919, and the procurement is a total small business set-aside, meaning only qualified small businesses may compete. Delivery must be F.O.B. Destination to the USCG Surface Forces Logistics Center in Baltimore, Maryland, with required labeling for Receiving Room, Building 88. The deadline for quotations is August 10, 2026, at 10:00 AM Eastern Standard Time. Offerors must complete and submit FAR 52.212-3 representations and certifications, including disclosures regarding corporate inversion status and compliance with anti-expatriate and subcontracting restrictions. Additional clauses governing procurement integrity, labor standards, Buy American Act, electronic funds transfer, and trafficking in persons prohibitions are fully incorporated. The contracting office is the Department of Homeland Security,
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 332999
New
Federal
ANODE
Solicitation # 70Z08026QCV226
The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotes for two specific corrosion-preventing zinc anodes under NSN 5340-01-647-6179 and NSN 5340-01-644-5483, each requiring 100 units manufactured by Galvotec Alloys, Inc. with part number GA-4. The first is a 4-inch diameter circular zinc slab weighing three pounds with a galvanized pipe core, while the second is a 2.5-pound flush-mount zinc anode measuring approximately 2 by 1 by 7 inches with a flat bar core and specific hole spacing. Both anodes must strictly conform to MIL-A-18001 specifications and are designated as GA-4, with no substitutions permitted unless the alternate part meets all salient physical, functional, and performance characteristics as determined by the Coast Guard. Packaging is critical: each item must be individually cushioned and enclosed in a certified fiberboard box—single-wall for the first item and heavy-duty double-wall for the second—per MIL-STD-2073-1E Method 10, with marking and barcoding compliant with MIL-STD-129R and ISO/IEC-16388-2007 Code 39 symbology. Any failure to meet these packaging, packing, and marking requirements will result in rejection and return at the vendor’s expense. The solicitation is a small business total set-aside under NAICS code 332999 with a 750-employee size standard and will be awarded as a firm fixed price contract using lowest price technically acceptable evaluation. Vendors must be registered in SAM.gov, possess a valid DUNS number and TIN, and submit complete representations and certifications as required by FAR clauses including 52.212-3, 52.212-4, and 52.212-5. Additional mandatory clauses cover subcontractor restrictions, trade agreements, Buy American Act, combat trafficking in persons, and prohibitions against contracting with inverted domestic corporations, which require disclosure and possible waiver documentation. The offer deadline is August 10, 2026 at 10:00 a.m. Eastern Standard Time, and all bids must originate from responsible small business sources compliant with federal procurement regulations and Coast Guard acquisition policies. Standard commercial packaging is
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 611430
New
Federal
Notice of Intent to Award Sole Source Order for OEM FAIRBANKS MORSE, LLC OP PISTON TRAINING
Solicitation # 52000SP260026950
The United States Coast Guard’s Surface Forces Logistics Center intends to award a sole-source purchase order to FAIRBANKS MORSE, LLC for original equipment manufacturer training on the FME 38 and 38T 8-1/8 opposed piston engine overhaul, conducted under Simplified Acquisition Procedures. This action is based on the unique technical specifications and proprietary nature of the OEM training, which other vendors are not currently verified to replicate. The notice is issued to conduct market research and invite other firms to demonstrate their ability to provide an equivalent training service, though no contract will be awarded based on responses alone. All submissions must focus on technical capability and equivalency evidence without包含 pricing. Interested parties must submit a written Capability Statement by 4:00 PM EST on August 5, 2026, including company details, business size with NAICS code 611430, point of contact information, and a narrative with supporting documentation proving capability to deliver an equivalent training product. Pricing information is prohibited, and proprietary data will be protected. Submissions must be sent via email to Patricia.M.Fremming@uscg.mil with the specified subject line, and oral responses are not accepted. The training is intended to support maintenance operations primarily in Beloit, Wisconsin, with the contracting office located in Norfolk, Virginia. The notice is not binding, and the government retains the right to request clarifications from respondents privately.
Professional and Management Development Training

POSTED

2 days ago

DEADLINE

in about 7 hours
View Details