CONTROL, COOMBS TEST
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The CONTROL, COOMBS TEST is a liquid control product designed for 200 tests, requiring refrigerated storage between 2 to 8 degrees Celsius and must not be frozen. Each unit is packaged in a 10 mL container and sold individually. The product is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, and it is classified as a Type I (Code A) medical item with a non-extendable shelf life of one month. At least 85% of the shelf life must remain from the date of manufacture to the date of delivery to the government, with labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards and be suitable for safe transport via common carrier, with export packaging when necessary, and must be marked according to Medical Marking Standard No. 1. The item is governed by the contract solicitation SPE2DS-26-T-223L, with a delivery requirement of five days after delivery order, under the NSN 6550-01-269-4302, and is managed by the Department of Defense’s Medical Supply Chain at the performance location in San Antonio, Texas, with point of contact Mary-Kathryn Donahue.
General Info
Agency
NAICS
Place of Performance
601 DAVY CROCKETT RD, SAN ANTONIO, TX, 78226, USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Response Deadline
Organization & Contact Information
Full Description
CONTROL, COOMBS TEST
FEATURES LIQUID CONTROL COOMBS TEST; SUFFICIENT FOR 200 TESTS
REQUIRES REFRIGERATION STORAGE BETWEEN 2 TO 8 DEGREES CELSIUS
(36 TO 46 DEGREES FAHRENHEIT) DO NOT FREEZE
UNIT OF ISSUE: EA (EACH,10 ML)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
..
SPE2DS-26-T-223L
SECTION B
RS003: Shelf-life requirement RS001 for a Type I (Code A) item with a shelf-life of 1 month (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 1 MONTHS. MINIMUM OF 85% SHELF LIFE REMAINING FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE GOVERNMENT. . SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER. .. ADEQUATE DATA FOR THE NSN/Part Number: 6550-01-269-4302 Quantity: 1 EA Purchase Request: 7017447490QTY: 1 Delivery: 5 days ADO
