This Solicitation opportunity from Department Of Defense was posted on January 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CONTROLLER,DATA ENT

Closed

SPRPA126RWA69Federal

Submission Closed03/02/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333998

New

SLED

ASTM Type I/III Water Treatment Skid FabricationThis subcontract involves the engineering, fabrication, and supply of modular, skid-mounted pure-water treatment systems for facility projects at North Dakota State University. The scope of work includes the integration of valves and instrumentation, as well as comprehensive factory testing of all assembled equipment to ensure operational readiness before delivery. All delivered systems must strictly adhere to ASTM Type I and Type III water-quality criteria. Interested parties should note that the response deadline for this opportunity is November 17, 2026.

POSTED

DEADLINE

NDSU - ASTM Type I and Type III Pure Water System Replacement

Solicitation # SRC000467

North Dakota State University is soliciting proposals under solicitation number SRC000467 for the replacement of its existing pure-water treatment system. The project requires a qualified offeror to provide a complete, integrated ASTM Type I and ASTM Type III pure-water generation and distribution support system, including a 500-gallon Type III and 250-gallon Type I storage tank. The scope of work encompasses all professional services, engineering, fabrication, controls, testing, commissioning, and training. The successful contractor must ensure the system meets specific water-quality criteria and must complete the project by the final deadline of June 15, 2027. Proposals must be submitted electronically via the NDBuys portal by November 17, 2026, at 2pm CT. Submissions are divided into a technical envelope and a financial envelope. Evaluation is based on a 100-point scale, with 80 points allocated to the technical proposal and 20 points to the cost proposal. A mandatory minimum of ten years of applicable experience is required for eligibility. The procurement process is managed by Procurement Officer Casie Ewalt, and the award will be based on a combined weighted score of technical and cost factors.

POSTED

DEADLINE

Fuel Delivery Station (FDS) System IntegrationThis subcontract for the Department of Defense, specifically Mschq Norfolk, involves the system integration of a Fuel Delivery Station for prime contractors working on Military Sealift Command tanker projects. The scope of work includes the supply and installation of one operational port-side station equipped with double hose probe rigs, constant tension spanwire winches, and passive safety slip-clutch devices. To ensure operational readiness and compliance, the contractor must perform Factory Acceptance Trials and Installation Weight Tests in accordance with NTTP 4-01.4 and MIL-STD-1399/301 standards. The project is categorized under NAICS code 333999 and has a response deadline of November 3, 2026.

POSTED

DEADLINE

Specialized Hangar Systems / Maintenance Equipment SupplierThis subcontract opportunity through the Department of Defense, specifically the W074 Endist Wilmington, involves the supply and installation of specialized equipment for aircraft hangars and maintenance facilities. The scope of work focuses on supporting prime contractors on USACE AFSOC projects by providing and commissioning critical hangar-specific systems, including specialized lighting, power, and compressed air. All provided equipment and installations must strictly adhere to AFSOC maintenance facility standards. The successful contractor will be responsible for the full lifecycle of the systems, from delivery to final commissioning, ensuring that all maintenance facility systems are fully operational and compliant with agency requirements.

W074 Endist Wilmington

POSTED

DEADLINE

HPAC Input Module Hardware SupplyThis subcontract involves the manufacture and procurement of replacement input modules for the number one and number two High Pressure Air Compressors supporting prime contractors at the Norfolk Naval Shipyard. The selected supplier is responsible for delivering submarine-specification hardware FOB Destination to the performance site in Portsmouth, ensuring all components strictly adhere to NAVSEA technical specifications. In addition to hardware requirements, the contractor must maintain full compliance with DFARS cybersecurity standards for suppliers. This effort falls under NAICS code 333998 and is managed through the Department of Defense for the Norfolk Naval Shipyard.

Norfolk Naval Shipyard Gf

POSTED

DEADLINE

Selective Laser Sintering (SLS) 3D Printer

Solicitation # W6399-27-SS20/A

The Department of National Defence is seeking the acquisition of one Selective Laser Sintering (SLS) 3D printer, with options to procure up to two additional units, for high-performance manufacturing, prototyping, and tooling. The equipment must be new, off-the-shelf hardware capable of processing engineering-grade thermoplastics such as Polyamide 11, Polyamide 12, Polypropylene, and TPU, with a minimum build volume of 150 x 150 x 300 mm. The requirement includes software licenses for at least three years that can function without an internet connection and must meet North American power standards of 120V at 60Hz. All units and associated consumables must be delivered and installed at Canadian Forces Base Petawawa, Ontario, no later than March 31, 2027, under Delivered Duty Paid (DDP) Incoterms 2020. This is a fixed-price defence contract governed by the Defence Production Act. Award will be based on the lowest evaluated price among offers that meet all mandatory technical criteria specified in the solicitation. Proposals must include an offer submission form, an offeror declaration form, and a financial proposal inclusive of all customs duties and taxes. The contractor is required to adhere to environmentally preferable packaging standards, ensuring materials are reusable, returnable, or recyclable. Additionally, the contractor must certify that the work is not produced using forced labour, as the government maintains the right to terminate the contract for defaults related to human trafficking or forced labour violations.

Department of National Defence

POSTED

DEADLINE

Six-column Mobile Lift System

Solicitation # W6897-27-0514

The Department of National Defence is soliciting offers for the supply, delivery, installation, commissioning, and virtual training of a new six-column mobile vehicle lift system for CFB Suffield in Alberta. The system must be current production equipment capable of lifting vehicles weighing at least 103,000 to 108,000 lbs. Key technical requirements include CSA or cUL certification, compatibility with standard Canadian electrical power systems, and the inclusion of rechargeable batteries and charging accessories. Essential safety features must include emergency stop controls on each column, automatic mechanical locking devices, overload protection, a safety stop system for obstructions, and emergency lowering capabilities during power failure. This fixed-price contract is open to Canadian suppliers and those from applicable trading partners, with an award based on the lowest evaluated price among compliant offers. Deliverables must be shipped Delivered Duty Paid to Building 163 at CFB Suffield, with a requested delivery date of January 2027. The successful contractor must provide virtual training via platforms such as Microsoft Teams, Zoom, or Cisco Webex within five business days of delivery. Additionally, the procurement mandates environmentally preferable packaging that is reusable, returnable, or recyclable. Compliance is strictly monitored, including prohibitions against forced labour and human trafficking in the supply chain.

Department of National Defence

POSTED

DEADLINE

High Resolution, Lithographic 3D Printing System for Metals, Ceramics and Polymers

Solicitation # 25-58227 B

The National Research Council Canada (NRC) is seeking a high resolution, lithographic 3D printing system for metals, ceramics, and polymers to support research activities at the Advanced Materials Research Facility in Mississauga, Ontario. The required system must utilize slurry feedstock and be capable of printing individual or multi-material configurations, supporting at least two distinct materials within a single layer or between layers. Key technical specifications include a minimum build volume of 70 x 40 x 150 mm and an integrated, automated, programmable material-change cleaning system. All electrical equipment must be certified under the Canadian Electrical Code, Part 1. The system must be delivered and installed on-site within five months of the contract award. This open tender, solicitation number 25-58227 B, is subject to various international trade agreements and the NRC Integrity Regime. The contract will be awarded to the responsive bidder offering the lowest evaluated price, provided they meet all mandatory technical criteria. Proposals must be submitted electronically as two separate attachments, a Technical Offer and a Financial Offer, to the NRC Bid Receiving Unit by October 13, 2026, at 2:00 PM EDT. Bidders must adhere to strict submission guidelines, including a 10MB email limit and a prohibition on zip files. Payment will be made as a fixed lump sum in CAD upon successful inspection and acceptance by Canada.

National Research Council of Canada

POSTED

DEADLINE

Change Maker SupplierThis subcontract agreement establishes a partnership for the supply of automated change-making machines to support prime contractors on City of Dallas procurement projects. The supplier is responsible for providing hardware that meets all city specifications and ensuring the equipment is delivered FOB to designated sites. To ensure compliance and safety during on-site setup, the supplier must maintain active General Liability and Workers Compensation insurance. This procurement opportunity is categorized under NAICS code 333998 and is managed through the City of Dallas.

POSTED

DEADLINE

Trash Compactor Equipment SupplierThis subcontract opportunity is for a Trash Compactor Equipment Supplier to provide commercial-grade industrial compactors for prime contractors working on City of Savannah waste management projects. The selected supplier will be responsible for the manufacturing, sourcing, and delivery of these units to designated city sites, ensuring that all equipment strictly adheres to ANSI/OSHA industrial safety standards for waste equipment. The solicitation was posted on October 19, 2026, with a response deadline of November 3, 2026. Operating under NAICS code 333998, this contract focuses on the procurement and delivery of specialized industrial machinery to support municipal waste infrastructure within the state of Georgia.

POSTED

DEADLINE

Trash Compactor - Event No. 12610

Solicitation # PE-62551-NONST-2026-000000242

The City of Savannah is soliciting bids for a trash compactor under solicitation number PE-62551-NONST-2026-000000242, also identified as Event No. 12610. This opportunity was posted on October 19, 2026, for performance within the state of Georgia. A pre-bid meeting via Microsoft Teams is scheduled for October 27, 2026, at 2:00 PM to address potential questions or issues. All bids must be submitted electronically through the official supplier portal at www.savannahga.gov/bids by the deadline of 1:30 PM on Tuesday, November 3, 2026. The City of Savannah promotes equal opportunities for all vendors, and the Board of Purchase maintains the right to reject any proposals or waive formalities. Primary contact for this solicitation is Tiffany Daniels.

POSTED

DEADLINE

Linear Electro-Mechanical Actuator SupplierThis subcontract involves the supply of ten linear electro-mechanical actuators for prime contractors supporting DLA supply contracts. The scope of work requires the manufacture or procurement of Kongsberg Defence and Aerospace AS part number 108674-01, which is classified as a Critical Application Item. All units must be delivered fully marked and packaged in accordance with MIL-STD-130, MIL-STD-2073-1E, and MIL-STD-129 standards. To be eligible, suppliers must maintain CMMC Level 2 compliance and hold a quality system certification of either ISO 9001 or SAE AS9003. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance located in New Cumberland. Responses are due by October 27, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

This contract solicitation, issued by the Department of Defense through the Pennsylvania DLA Aviation office in Philadelphia, seeks procurement of newly manufactured commercial products specifically for data controllers classified under NAICS code 333998. The solicitation emphasizes strict compliance with quality standards such as AS/EN/JISQ 9100 or equivalent and mandates that supplies must be new, unused, and sourced from government-approved manufacturers or authorized distributors. Refurbished, remanufactured, or repaired items are expressly unacceptable. For certain platforms like the P-8/P-3, FAA certification documentation must accompany products to ensure airworthiness. Offers from distributors must include an authorized distributor letter at the time of proposal submission. The contract includes various clauses addressing inspection, warranty, payment instructions, equal opportunity employment, and compliance with Buy American and trade agreement policies. There are also stipulations on reporting, value engineering, and contractor business systems. The solicitation is time-sensitive with a response deadline in early March 2026 and is being issued under expedited authority due to urgency, waiving the synopsis requirement. The primary point of contact is available via email for proposal submissions, which must be sent electronically. Overall, this solicitation lays out comprehensive compliance, quality, and administrative requirements aimed at acquiring reliable, high-quality commercial components for defense applications.

General Info

DoD seeks new, FAA-certified data controllers, meeting AS/EN/JISQ 9100 standards, by March 2026.

Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

NAICS

333998 - All Other Miscellaneous General Purpose Machinery Manufacturing

Place of Performance

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseClosed

PostedJan 29

Solicitation

Notice updatedJan 29

The notice description changed.

Response DeadlineMar 2

Deadline has passed

Type ChangedSep 3

Solicitation → Presolicitation

Submission Closed

03/02/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

Contacts1 person available

OfficePHILADELPHIA, PA, 19111-5098, USA

Organization / AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

Office AddressPHILADELPHIA, PA, 19111-5098, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Full Description

COMMERCIAL PRODUCT PROCUREMENT NOTICE|5|||||| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|||x|AS/EN/JISQ 9100 or equivalent||||| TIME OF DELIVERY (JUNE 1997)|20||||||||||||||||||||| STOP-WORK ORDER (AUG 1989)|1|| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Report (Combo)|Invoice 2in1|TBD|SPRPA1|TBD|TBD|SEE SCHEDULE|TBD|TBD|TBD|TBD|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| VALUE ENGINEERING (JUN 2020)|3|||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUNITY FOR VETERANS (JUN 2020)|4||||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|12 MONTHS|45 DAYS AFTER DISCOVERY OF DEFECT||||| SMALL BUSINESS SUBCONTRACTING PLAN (JAN 2025)|4||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2||| TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| LIMITATION OF LIABILITY--HIGH-VALUE ITEMS (FEB 1997)|1|| ESTIMATE OF PERCENTAGE OF RECOVERED MATERIAL CONTENT FOR EPA DESIGNATED PRODUCTS (MAY 2008))|1|| REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN CERTIFIED COST OR PRICING DATA --MODIFICATIONS (NOV 2021))|7|||||||| CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVEORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR 2025)(DEVIATION 2025-O|81|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| CUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR 2025)(DEVIATION|16||||||||||||||||| SERVICES (MAR 2025)(DEVIATION 2025-O0003 AND 2025-O0004))|3|||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2025)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM (FEB 2024)|1|| ROYALTY INFORMATION (APR 1984)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND 2025-O0004))|12|334111|1250||||||||||| COST ACCOUNTING STANDARD NOTICES AND CERTIFICATION (DEVIATION 2018-O0015)(MAY 2018))|1|| FACSIMILE PROPOSALS (OCT 1997)|1|IN LIEU OF FAX, EMAIL ELECTRONIC VERSION TO NIKOLIN.TOROVECI@DLA.mil| REQUIREMENTS FOR SUBMISSION OF PROPOSALS VIA ELECTRONIC MEDIA (JAN 2018)|1|NIKOLIN.TOROVECI@DLA.mil| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x| REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN CERTIFIEDCOST OR PRICING DATA (MAY 2024))|1|| EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)|4||||| For Critical Safety Items (CSI), DFARS clause 252.209-7010, Identification of Critical Safety Items, is incorporated by reference. Procurement Note E05 (DLAD 46.292) is hereby incorporated by reference. As applicable, DFARS clause 252.242-7005, Contractor Business Systems, is incorporated by reference. THIS SOLICITATION IS BEING ISSUED UNDER EAF AUTHORITY; Synopsis is waived based on urgency (FAR 5.202(a)(2)). Unless for (P-8/P-3 Platform) Commercial Items (IAW FAR 2.101) readily available on the commercial market for which current FAA certification documentation (FAA Form 8130-3 Air Worthiness Approval Tag) will accompany individual product, for New Unused stock from the OEM, Offerors are advised that offers received from sources which are not government-approved sources of supply will be deemed technically unacceptable, and therefore ineligible for award. Any distributors of approved source(s) MUST submit a copy of their a authorized distributor letter, on the source's letterhead, to the buyer point of contact indicated on the solicitation via email, at time of proposal submittal. Other than what is noted for P-8/P-3 Platform, all potential offers shall provide newly manufactured spares only. Refurbished, remanufactured, or repaired material will not be acceptable; Offers for such are ineligible for award. \