Controller Display

MARKET SURVEY ANNOUNCEMENT Introduction & Purpose This market survey notice is a source sought for information ONLY to be used for preliminary planning purposes. This announcement is not a Screening Information Request (SIR) or Request for Proposal (RFP) and should not be treated as such. The FAA is not seeking proposals or accepting unsolicited proposals. The Federal Aviation Administration (FAA) is seeking information regarding market availability for a Controller Display that will be compatible with a Personal Computer (PC)-Based Runway Visual Range (RVR) system. The FAA must procure Controller Displays for the PC- Based Runway Visual Range (RVR) system for use in the Air Traffic Control Tower Cab. Due to obsolescence issues this effort will replace all current Teledyne New Generation (NG) RVR Controller Display systems in the NAS. In order to complete this effort, this will be a development and production contract. Incumbent Contractor Vaisala Incorporated, located in Louisville, CO is the incumbent vendor with contract DTFAWA-16-D-00011. Nature of Competition An acquisition strategy for procurement has not been determined at this time; however, either an unrestricted competition, a set-aside, or a single-source award will be chosen depending on the responses to this market survey. Standard Language Respondents to this Market Survey Announcement should note that: (a) This is not a Screening Information Request, Request for Proposal, or an obligation on the part of the FAA to acquire services of any kind; (b) The FAA is not seeking or accepting unsolicited proposals; (c) The FAA will not pay for any information received or costs incurred in preparing the response to the market survey; (d) Any costs associated with the market survey submittal is solely at the interested vendor's expense; and (e) All vendors responding to this announcement are responsible for ensuring that documents submitted contain the appropriate proprietary marking. Submittal Requirements for Market Survey The FAA seeks specific information from interested vendors as to their ability to meet certain requirements. In order to successfully perform and minimize risk to the FAA, potential vendors must: 1. The Controller Display (CD) must be form, fit, function compatible with existing controller display in accordance with FAA Specification FAA-E-2772B, August 22, 2006. 2. The display physical dimension must be same as current controller display (10'X7'X8.5). 3. Must meet interface requirements and communication protocol listed in FAA specification FAA-E-2772B. Potential offerors must provide the FAA with documentation (and Capabilities Statement) for review that describes the offerors technical knowledge and capability to achieve the requirements set forth above. Documentation submitted must be no more than eight pages including any charts or diagrams. Submissions and Format The FAA prefers that all submittals, including attachments, be submitted electronically to the email addresses listed below. Please submit as a MS Word file in English language (Times New Roman font, size 12) or pdf as applicable. All responses (one response per company) are to be provided on company letterhead. Also, please note that the FAA e-mail server restricts file size to 10 MB; therefore, responses may have to be submitted in more than one e-mail in order to be received. All responses to this Market Survey should be received, no later than, 5:00 pm on March 10, 2023 and addressed to Mr. Haben Woldemichael Contracting Officer (AAQ-340) Federal Aviation Administration 800 Independence Avenue, SW Washington DC 20591 Email: contact@example.gov. All question are due by February 10, 2023 at 5pm. For questions on this market survey, please contact contact@example.gov. Additional Information The responses to this market survey will be used for informational purposes only to determine market availability. Be advised that the FAA reserves the right to use the information received in response to this announcement to decide on defining requirements for future FAA solicitations. All interested parties responding to this market survey must comply with the FAA Acquisition Management System (AMS) clause 3.6.4-2, Buy American Act - Supplies. Full text for the Buy American Act can be located at https://fast.faa.gov/contractclauses.cfm. All interested parties are advised that the FAA will not pay for any information received, or administrative costs incurred in preparing responses to this announcement. Therefore, any costs associated with and submissions from an interested party will be solely at the interested party's expense. Additionally, the information provided in response to this announcement is for information only and will not be released. If proprietary information is submitted, it must be clearly marked in the responses. Failure to respond to this request will not result in exclusion from future competition. The NAICS code is 334519, Other Measuring and Controlling Device Manufacturing. Attachments Specification FAA-E-2772B, August 22, 2006