Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Controls & Automation Engineering Design

Active

State & Local

Response Deadline11/13/2026, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Controls and Automation Engineering Design involves providing specialized design services for building automation systems and controls on Cornell University facility projects. The selected contractor will work with prime contractors to develop control logic for new chilled water connections and modify existing building controls to ensure operational efficiency without local chiller or tower equipment. Key deliverables include the creation of detailed technical specifications and controls sequences of operation. The project falls under NAICS code 541330 and is associated with Cornell University in New York. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline of November 13, 2026.

General Info

Controls and automation engineering design for Cornell University building automation system projects.

Agency

New York → Cornell University

NAICS

541330 - Engineering Services

Place of Performance

NY, USA

Set-Aside

NONE

Documents

This scope was carved out of 2140165.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SUCF# 161105 Replace Cooling Tower - Kenneth Post Laboratory

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 05:00:00 AM UTCin 21 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNew York → Cornell University

ContactsNo contacts available

OfficeN/A

Organization / AgencyNew York → Cornell University

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs design for building automation systems (BAS) and controls for prime contractors on Cornell University facility projects. Designs control logic for new chilled water connections and modifies existing building controls to operate without local chiller/tower equipment. Delivers controls sequences of operation and technical specifications.

Similar Contracts

Same NAICS industry code

First Article Testing and ValidationThis subcontract, titled First Article Testing and Validation, is issued by the Department of Defense through DLA DIST SAN JOAQUIN. The project focuses on performing First Article Testing for prime contractors on DLA supply contracts to validate the manufacturing processes for bomb rack gas chambers. The scope of work involves testing initial prototypes using specialized measurement tools and rigs, documenting all results, and coordinating directly with the DCMA QAR to secure necessary approvals. The final deliverables for this engagement include a certified first-article part and a comprehensive FAT Report. The work is to be performed in Tracy, California, under NAICS code 541330. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

Solicitation # 49634

The New Jersey Department of Transportation Procurement is seeking proposals for solicitation TP-870, which focuses on Concept Development services. This is a three-year term agreement specifically for Design B-1 Level A and H-1 Level A qualifications. The project falls under NAICS code 541330, indicating a requirement for engineering services. The solicitation was posted on October 22, 2026, and requires all responses to be submitted by the deadline of November 17, 2026, at 3:00 PM. Interested parties can find further details and submission guidelines through the Bid Express portal.

New Jersey Department of Transportation Procurement

POSTED

about 7 hours ago

DEADLINE

Pure Water Southern California Direct Potable Reuse Testing Facility

Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility

Kiewit Infrastructure West Co.

POSTED

about 7 hours ago

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Relevant expertise should align with NAICS codes for administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The primary point of contact for this opportunity is Liz Jordan-Wettstein. This solicitation specifically targets DBE certified firms to support the critical infrastructure and operational resilience of the utility agency within the state of California.

Aanko Technologies Inc.

POSTED

about 7 hours ago

DEADLINE

Baseline Structural ReviewThis subcontract for Baseline Structural Review involves performing a structural integrity assessment of a three-level building for prime contractors working on Illinois State Board of Education facility projects. The selected provider will utilize structural analysis tools to review key elements and identify any stability issues or deficiencies, culminating in the delivery of a comprehensive structural review report. The project is managed by the Illinois Operations agency under NAICS code 541330. A critical requirement for this engagement is that the performing party must hold a Professional Engineer license issued by the state of Illinois. The solicitation was posted on October 22, 2026, with a response deadline of October 28, 2026.

OPERATIONS586 - Operations

POSTED

about 8 hours ago

DEADLINE

MEP Systems InspectionThis subcontract for MEP Systems Inspection involves performing technical inspections of core utility systems for prime contractors on Illinois State Board of Education facility projects. The scope of work includes the evaluation of HVAC, electrical, and plumbing or sewer systems utilizing specialized equipment such as electrical testers, HVAC diagnostic tools, and plumbing cameras. The final deliverable is a comprehensive MEP inspection report detailing all findings and recommended corrective actions. To qualify for this engagement, the provider must be a Licensed Master Electrician, Master Plumber, or Professional Engineer. The opportunity is managed by the Illinois Operations agency under NAICS code 541330. Interested parties must submit their responses by the deadline of October 28, 2026.

OPERATIONS586 - Operations

POSTED

about 8 hours ago

DEADLINE

Specialized Roof InspectionThis subcontract opportunity involves providing specialized roof inspections for prime contractors working on Illinois State Board of Education facility projects. The selected provider will perform detailed technical evaluations of roofing systems, specifically focusing on the roof membrane, flashing, and drainage systems through the use of moisture scanning equipment. The final deliverable is a comprehensive inspection report that must include an assessment of the roof's remaining useful life. To qualify for this engagement, candidates must hold a professional engineering license or a recognized roofing certification. The project falls under NAICS code 541330 and is managed by the Illinois Operations agency. Interested parties should note the response deadline of October 28, 2026.

OPERATIONS586 - Operations

POSTED

about 8 hours ago

DEADLINE

Property Condition Assessment (PCA)This subcontract for Property Condition Assessment services supports prime contractors on facility projects for the Illinois State Board of Education. The scope of work involves performing comprehensive evaluations of structural elements, building envelopes, and overall physical conditions in general accordance with ASTM E2018 standards. The primary objective is to identify existing deficiencies and estimate the remaining useful life of major building systems, culminating in a detailed report that outlines findings and recommended corrective actions. Qualified providers must possess the necessary professional credentials and maintain Professional Liability (Errors and Omissions) insurance. This opportunity is categorized under NAICS code 541330 and is managed by the Illinois Operations division. Interested parties should note the response deadline of October 28, 2026.

OPERATIONS586 - Operations

POSTED

about 8 hours ago

DEADLINE

Structural Engineering ServicesThis subcontract for Structural Engineering Services supports prime contractors on projects for the Henry County Board of Commissioners in Georgia. The selected provider will be responsible for performing structural evaluations of existing crossings and developing comprehensive engineering recommendations and bridge replacement designs. These tasks require the use of specialized structural analysis and design software to produce final evaluation reports and detailed bridge design specifications. Qualified candidates must hold a Professional Engineer license in Structural Engineering to perform this work. The solicitation was posted on October 22, 2026, with a response deadline of November 19, 2026. The project falls under NAICS code 541330, focusing on specialized engineering services to ensure the safety and integrity of county infrastructure.

Henry County Board of Commissioners

POSTED

about 9 hours ago

DEADLINE

Geotechnical Engineering ServicesThis subcontract for Geotechnical Engineering Services involves performing subsurface investigations for prime contractors working on bridge projects for the Henry County Board of Commissioners in Georgia. The selected provider will be responsible for conducting soil investigations and performing borings using specialized drilling rigs and sampling equipment to establish necessary foundation requirements. A Professional Engineer license is required to execute this contract, which culminates in the delivery of a Geotechnical Investigation Report and specific foundation recommendations. Interested parties must submit their responses by November 19, 2026, under NAICS code 541330.

Henry County Board of Commissioners

POSTED

about 9 hours ago

DEADLINE

Hydrologic & Hydraulic (H&H) AnalysisThis subcontract opportunity involves providing specialized hydrologic and hydraulic analysis for prime contractors working on bridge projects for the Henry County Board of Commissioners in Georgia. The selected provider will be responsible for conducting water flow analysis, drainage analysis, and floodplain evaluations utilizing HEC-RAS and HEC-HMS software. The primary objective of these services is to enhance hydraulic capacity and mitigate flooding risks, culminating in the delivery of a comprehensive H&H Analysis Report and specific hydraulic recommendations. Qualified candidates must hold a Professional Engineer license to perform this work under NAICS code 541330. The solicitation was posted on October 22, 2026, with a response deadline set for November 19, 2026.

Henry County Board of Commissioners

POSTED

about 9 hours ago

DEADLINE

(RFQ) 27-23, Engineering and Design Services for Gardner Road Bridge

Solicitation # 27-23

The Henry County Board of Commissioners is soliciting proposals for professional engineering services for the Gardner Road Bridge Improvement Project. The scope of work involves evaluating existing hydraulic, structural, and roadway conditions at the Gardner Road stream crossing to develop recommendations for replacing a culvert crossing with a bridge structure. Key objectives include increasing hydraulic capacity, reducing flooding potential, and enhancing public safety and roadway resiliency. The selected contractor will be responsible for all labor, materials, and equipment necessary to complete project management, surveying, field investigations, hydrologic and hydraulic analysis, structural evaluation, environmental permitting, geotechnical services, and the preparation of 30 percent preliminary and 90 to 100 percent final construction documents. Qualified vendors must submit their responses by 3:00 PM local time on November 19, 2026, via the County's eProcurement Portal or in person at the Henry County Purchasing Department. Submissions must include a sealed envelope containing one unbound original, one bound copy in a half-inch ring binder, and a PDF version on a labeled USB flash drive. Required documentation includes a detailed fee proposal, a W9 form, and several certifications, including a Drug Free Workplace Certification, a Covenant of Non-Discrimination, and a Georgia Security and Immigration Compliance Act affidavit. Award selection is based on the most qualified firm, with potential for additional points via oral presentations. The contract requires comprehensive insurance coverage, including $1,000,000 for professional liability, automobile liability, and each occurrence of general liability, with a $2,000,000 umbrella policy. All work must comply with OSHA and applicable local, state, and national codes. Henry County maintains the right to terminate the contract for convenience with 30 days' written notice or for default after a 30-day notice period. Payment is contingent upon the County's acceptance of completed services and the submission of original invoices containing the specific purchase order and bid package numbers.

Henry County Board of Commissioners

POSTED

about 9 hours ago

DEADLINE

More opportunities from New York → Cornell University

Same awarding agency

Controls Installation & IntegrationThis subcontract opportunity involves the installation and programming of controls for new chilled water systems on Cornell University facility projects. The selected contractor will be responsible for installing sensors, valves, and controllers, ensuring the building's system is fully integrated with the campus-wide chilled water network. The final deliverable is a fully commissioned and tested building automation system. The solicitation was posted on October 22, 2026, with a response deadline of November 13, 2026. Classified under NAICS code 238290, this project is managed through Cornell University in New York. Interested parties can find further details via the New York State Contract Reporter.

Other Building Equipment Contractors

POSTED

about 19 hours ago

DEADLINE

Electrical ContractingThis electrical contracting subcontract involves performing critical electrical modifications for prime contractors on Cornell University facility projects. The primary scope of work focuses on cooling system conversions, which include disconnecting and capping power to obsolete chillers and cooling towers while installing new electrical components for campus connections. The objective is to deliver a modified electrical system that fully complies with all mechanical design specifications. The opportunity is categorized under NAICS code 238210 and was posted on October 22, 2026. Interested parties must submit their responses by the deadline of November 13, 2026. This project is situated within the New York region and is managed under the authority of Cornell University.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 19 hours ago

DEADLINE

Mechanical Contracting (HVAC/Piping)This mechanical contracting subcontract for Cornell University involves the installation of campus chilled water connections and the removal of legacy cooling infrastructure. The scope of work includes the demolition and removal of existing chillers and cooling towers, the installation of necessary piping for campus connectivity, and the modification of internal building mechanical systems to ensure a fully operational chilled water system and a cleared site. The project falls under NAICS code 238220 and is managed through prime contractors on university facility projects. Interested parties should note the posted date of October 22, 2026, with a response deadline set for November 13, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 19 hours ago

DEADLINE

Electrical Engineering DesignThis electrical engineering design subcontract involves providing specialized design services for prime contractors on Cornell University facility projects. The primary objective is to support a cooling system conversion by evaluating existing electrical feeds for chillers and cooling towers, designing the decommissioning of obsolete electrical services, and establishing new power requirements for campus connection infrastructure. The selected contractor will be responsible for delivering comprehensive electrical construction documents and technical specifications. This opportunity falls under NAICS code 541330 and is associated with Cornell University in New York, with a response deadline set for November 13, 2026.

Engineering Services

POSTED

about 19 hours ago

DEADLINE

Mechanical Engineering (HVAC & Piping) DesignThis subcontract for Mechanical Engineering (HVAC and Piping) Design involves providing detailed mechanical design services for prime contractors on Cornell University facility projects. The primary scope of work focuses on converting the Kenneth Post Laboratory cooling system to a campus chilled water distribution system, which includes investigating existing conditions, designing the chilled water connection, and specifying the removal of current chillers and cooling towers. The selected provider will be responsible for delivering comprehensive mechanical construction documents, technical specifications, and detailed cost estimates. This project falls under NAICS code 541330 and is associated with Cornell University in New York, with a response deadline set for November 13, 2026.

Engineering Services

POSTED

about 19 hours ago

DEADLINE

SUCF# 161105 Replace Cooling Tower - Kenneth Post Laboratory

Solicitation # 2140165

Cornell University is seeking Statement of Qualifications from engineering consultants for solicitation 2140165 to provide design services for the Kenneth Post Laboratory. The project involves removing the existing cooling tower and chiller equipment and converting the building to the campus chilled water distribution system. The scope of work includes investigating existing conditions, designing the new campus chilled water connection, preparing construction documents and cost estimates, coordinating with stakeholders, and providing bidding and construction administrative services. The estimated completion date for the project is December 31, 2028, with a contract term of one to two years. Proposals must be submitted in PDF format, not exceeding 25 pages, and emailed to the Capital Planning Manager by the deadline specified in the New York State Contract Reporter ad. Evaluation will be based on the prime consultant's experience, staff qualifications, technical approach, and previous work with educational or state agencies. No fee information should be included in the initial submission, as fee proposals will only be requested after a consultant is selected. The contract mandates specific diversity goals, including a 9 percent MBE goal, an 11 percent WBE goal, and a 6 percent SDVOB goal, which must be detailed using the required Subconsultant Staffing List.

Engineering Services

POSTED

about 19 hours ago

DEADLINE

Asbestos & Hazardous Materials ConsultingThis subcontract for Asbestos and Hazardous Materials Consulting involves providing specialized survey and remediation planning services for prime contractors working on Cornell University facility projects. The selected provider will be responsible for conducting thorough site inspections, sampling for lead, asbestos, and other hazardous materials, and developing detailed abatement specifications. The final deliverables for these efforts include comprehensive hazmat survey reports and actionable abatement plans. To qualify for this engagement, contractors must hold all state-required hazardous materials certifications. The opportunity is categorized under NAICS code 541620, with a response deadline set for November 4, 2026. Interested parties can find further details through the New York State Contract Reporter.

Environmental Consulting Services

POSTED

DEADLINE

Construction Cost EstimatingThis subcontract opportunity with Cornell University seeks a qualified provider to deliver professional construction cost estimating services for facility projects. The selected contractor will be responsible for analyzing design documents to produce accurate budgetary estimates and final construction cost projections for prime contractors, culminating in the delivery of detailed cost estimate reports. To ensure technical accuracy, the university requires that the provider hold professional certification in cost estimating, such as those granted by the ASPE. Interested parties must submit their responses by November 4, 2026, in accordance with the solicitation posted on October 14, 2026.

Engineering Services

POSTED

DEADLINE

Electrical Engineering ServicesThis subcontract for Electrical Engineering Services involves designing electrical power distribution and lighting systems for prime contractors working on Cornell University facility projects. The scope of work includes the development of detailed electrical layouts, panel schedules, lighting designs, and the determination of power requirements, culminating in the delivery of comprehensive electrical design drawings and specifications. Qualified candidates must hold a Professional Engineering license to be eligible for this role. The solicitation was posted on October 14, 2026, with a response deadline of November 4, 2026. This opportunity falls under NAICS code 541330 and is centered on supporting infrastructure improvements within the Cornell University system in New York.

Engineering Services

POSTED

DEADLINE

HVAC (Mechanical) Engineering ServicesThis subcontract for HVAC Engineering Services involves providing specialized mechanical design for facility projects at Cornell University. The selected contractor will work under prime contractors to perform critical technical tasks, including load calculations, equipment selection, and the design of piping and ductwork for climate control systems. The final deliverables for this engagement consist of comprehensive mechanical design drawings and detailed specifications. To be eligible for this role, the provider must hold a Professional Engineering license. The opportunity is categorized under NAICS code 541330 and was posted on October 14, 2026, with a response deadline of November 4, 2026.

Engineering Services

POSTED

DEADLINE

Plumbing & Fire Protection EngineeringThis subcontract opportunity is for Plumbing and Fire Protection Engineering services to support prime contractors on facility projects at Cornell University. The selected provider will be responsible for developing comprehensive design documents, including piping layouts, water supply systems, waste disposal, and fire sprinkler and alarm systems. A Professional Engineering license is required to perform this work. Interested parties must submit their responses by November 4, 2026, in accordance with the solicitation posted on October 14, 2026.

Engineering Services

POSTED

DEADLINE

Structural Engineering ServicesThis subcontract for Structural Engineering Services involves providing structural analysis and design for prime contractors working on Cornell University facility projects. The selected provider will be responsible for developing comprehensive structural plans, detailed calculations, and technical specifications to ensure the overall integrity of the buildings. A Professional Engineering license is a mandatory requirement for this engagement. The opportunity was posted on October 14, 2026, with a response deadline of November 4, 2026. Falling under NAICS code 541330, the contract focuses on the delivery of high-quality structural design drawings and technical documentation to support university infrastructure improvements.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS