Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Corrosion-Resistant Stainless Steel Plate Supply

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of 0.250-inch thick stainless steel plates manufactured to ASTM A240 Grade 304 specifications, requiring the material to be hot rolled and annealed to meet precise mechanical and chemical properties. Strict compliance with dimensional tolerances and material integrity is mandatory, with a Certificate of Quality Compliance required to verify adherence to all technical standards. The plates are intended for use in corrosion-resistant applications under demanding environmental conditions, ensuring long-term performance and reliability. This subcontract, issued under NAICS code 331221 by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I program, specifies TINKER AFB, Oklahoma with ZIP code 73145-8000 as the place of performance. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026. The procurement is being managed through the DIBBS portal, and bidders are expected to meet all federal supply and quality assurance requirements without exception.

General Info

Supply 0.250-inch ASTM A240 Grade 304 hot-rolled annealed stainless steel plates to Tinker AFB by August 17, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 0.250-inch thick stainless steel plates made from ASTM A240 Grade 304, hot rolled and annealed, with strict dimensional and compliance requirements including Certificate of Quality Compliance.

Similar Contracts

Same NAICS industry code

95--ARMOR PLATE

Solicitation # SPE8E426Q0367

The solicitation seeks armor plate with NSN 9515014849150 under a Small Business Set Aside, with a total requirement of three units to be delivered to DLA Distribution Red River within 365 days of award. Only approved source 10237 135257-66 is designated for this procurement, and quotes must be submitted electronically by the deadline of August 14, 2026. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided; all responsible sources are eligible to respond if their submissions are timely received. The solicitation number is SPE8E47Q0367, posted on August 6, 2026, and classified under NAICS code 331221 for rolled metal product manufacturing. The contracting office is the Department of Defense, DLA Troop Support, located in Philadelphia, Pennsylvania, with primary point of contact for inquiries directed via email to DibbsBSM@dla.mil, and further details accessible through the provided SAM.gov link.

DLA Troop Support

POSTED

about 8 hours ago

DEADLINE

95--ARMOR PLATE

Solicitation # SPE8E426Q0360

The U.S. Department of Defense, through DLA Troop Support, is seeking quotes for Armor Plate with NSN 9515014835217 under a Small Business Set Aside solicitation numbered SPE8E426Q0360. A total of six units are required, each to be delivered to W1A8 DLA Distribution within 180 days of award. The only approved source for this item is 10237 219243, and the solicitation is restricted to small businesses as defined by the SBA under NAICS code 331221. Quotes must be submitted electronically and received no later than August 14, 2026, and no hard copies of the solicitation are available. Only responsible sources may respond, and all timely submissions will be considered without the availability of detailed specifications, plans, or drawings. The point of contact for inquiries is DibbsBSM@dla.mil, and the full solicitation must be accessed via the SAM.gov link provided. The procurement office is located in Philadelphia, Pennsylvania.

DLA Troop Support

POSTED

about 8 hours ago

DEADLINE

95--ARMOR PLATE

Solicitation # SPE8E426Q0366

The contract seeks the procurement of 6 units of armor plate with NSN 9515014849150, to be delivered to DLA Distribution Red River within 365 days after award. The approved source for this item is identified as 10237 135257-66, and the solicitation is issued as a restricted RFQ under a Small Business Set Aside, meaning only small business concerns are eligible to compete. The NAICS code 331221 indicates the classification falls under Rolled Metal Product Manufacturing. All responsible small business sources may submit quotes electronically, and no hard copies of the solicitation are available. Technical specifications, plans, or drawings are not provided, so offerors must proceed based on the available information. The solicitation number is SPE8E426Q0366, posted on August 6, 2026, with responses due by August 14, 2026. The contracting office is DLA Troop Support located in Philadelphia, Pennsylvania, and inquiries must be directed via email to the designated buyer as specified in the solicitation's block 5 or through the provided DIBBS portal link.

DLA Troop Support

POSTED

about 8 hours ago

DEADLINE

Laminated Steel Shim Stock Manufacturing

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Stainless Steel Plate Manufacturing (ASTM A240 Grade 304)The contract requires the manufacture of hot-rolled, annealed stainless steel plates meeting ASTM A240 Grade 304 specifications, with precise dimensions of 0.250 inches in thickness, 50 inches in width, and 144 inches in length. The material must fully comply with applicable military material standards and be delivered with certified mill documentation confirming adherence to all technical and quality requirements. Production must align with industry best practices for austenitic stainless steel fabrication, ensuring consistent mechanical properties and corrosion resistance as defined by the referenced ASTM standard. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a place of performance in New Cumberland, Pennsylvania, postal code 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 331221 identifies the primary industrial classification as rolling and drawing of stainless steel. All work must be executed to meet federal defense procurement requirements, and the supplier is expected to provide full traceability and compliance documentation with delivery.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Defense-Grade Metal Sheet SupplyThe contract mandates the procurement and delivery of a single unit of a defense-grade metal sheet identified by NSN 9535016031832, with an absolute requirement for zero tolerance in quantity variance, ensuring precise adherence to the specified amount. All deliverables must fully comply with military packaging standards to guarantee integrity during transport and storage within defense logistics systems. The procurement is structured as a subcontract under NAICS code 331221, indicating fabrication of rolled metal products, and is managed by the Department of Defense through the Warner Robins office. Performance of the contract is to be completed at Robins AFB with a zip code of 31098-1887, reflecting the designated delivery location. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside provisions applicable. The contract is accessible via the DIBBS portal for qualified vendors to submit proposals under strict compliance requirements.

POSTED

DEADLINE

Precision Metal Sheet Supply – Corrosion-Resistant SteelThe contract seeks the supply of eight sheets of corrosion-resistant steel, specifically CRES 301 in 1/4 hard temper with a bright finish, each measuring 0.071 inches in thickness and 36 by 96 inches in dimension, to meet both military and commercial quality standards. The material must conform to precise mechanical and surface characteristics to ensure durability and performance in demanding environments, with compliance to applicable specifications as a non-negotiable requirement. All deliverables are expected to be fully traceable and certified to meet the integrity required for defense-related applications. The solicitation falls under the NAICS code 331221 for rolled metal product manufacturing and is issued as a subcontract by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I. The place of performance is designated as San Diego, California, with the delivery address specified as 92136-3581. The request for quotation was posted on August 5, 2026, and responses are due by August 17, 2026. Interested parties must submit proposals through the DIBBS portal at the provided link, ensuring all technical, logistical, and compliance criteria are addressed within the deadline to be considered for award.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Stainless Steel Sheet Supply

POSTED

DEADLINE

Solicitation # SPE8E6-26-T-4078

DLA issues a solicitation for 200 ground stakes under contract SPE8E6-26-T-4078, with the NSN 5660-01-457-9755 and part number NO.3 REBAR GRADE 60, to be delivered FOB origin within 39 days of contract award, with a required delivery date of August 5, 2026. The quantity is fixed at 200 units with zero variance allowed, and inspection and acceptance occur at the destination warehouse located at 25600 S Chrismann Road, Tracy, CA 95304-5000. Packaging must comply with ASTM D3951 as supplemented by all applicable DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. All packaging and labeling must adhere strictly to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements, with the Unit of Issue being each and the Quantity per Unit Pack specified as QUP:025. The contractor is Allied Tube & Conduit Corp based in Harvey, IL, and the contract incorporates referenced technical and quality requirements identified by R or I numbers from the official DLA master list. Transportation details are governed by DLAD Proc Note C19 and C20, and the delivery address matches the freight shipping and parcel post destination. The solicitation is open for response until August 17, 2026, with point of contact Tai Nguyen at DLA Dist San Joaquin for inquiries.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1971

The contract specifies the procurement of 6 sheets of austenitic stainless steel, cold rolled, conforming to Composition 301 in annealed condition with sheared edges, each measuring 0.090 inches thick, 36 inches wide, and 120 inches long, weighing approximately 114.75 pounds per sheet. All material must strictly adhere to the exact dimensional requirements without tolerance for test coupons, and must be supplied in whole-foot lengths only. Continuous identification markings are mandatory on every unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluids that remain legible after normal handling, and adhesive labels are required for smaller bars and tubes under 0.250 inches in nominal outer diameter. A Certificate of Quality Compliance—commonly known as a mill-material certification—must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. The material must comply with ASTM A666/A666M-24 and SAE AMS2807C standards as referenced in the Technical Data Package, and packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines, with special preservation code ZZ per ASTM A700. Packaging must prevent physical damage and include appropriate bracing and dunnage compatible with the metal’s requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and non-compliance constitutes an unauthorized substitution with potential criminal penalties. The solicitation waives source inspection requirements for QSLD-compliant suppliers, relieving them of additional quality conformance inspections. The delivery is FOB origin with a strict 11-day lead time, requiring shipment to the DLA Distribution facility in New Cumberland, Pennsylvania, by August 7, 2026, with zero quantity variance permitted. All documentation, including CDRL-METALSCERT, must be submitted as required, and failure to meet any specification will result in rejection of the product.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1952

This contract specifies the procurement of steel bars composed of Steel Comp 630, round in shape, centerless ground, with a diameter of 2.250 inches and lengths between 10 and 12 feet in whole-foot increments only, weighing approximately 13.520 pounds per foot. The material must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including the Certificate of Quality Compliance which must accompany each shipment and be forwarded to the contracting officer. Continuous identification markings are mandatory on every unit, including the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stenciling or stamping using waterproof, non-contaminating fluids that remain legible and stable under normal handling; adhesive labels are required for bars under 0.250 inches in nominal OD. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with special codes Z and ZZ as defined by ASTM A700, and palletization must follow DLA packaging directives. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96, and failure to comply renders the bid non-compliant and subject to rejection. Suppliers not on the QSLD must explicitly declare their deviation, and any product sourced from an unauthorized distributor is considered an unauthorized substitution with potential criminal penalties. The technical data package references SAE AMS5643W and SAE AMS2806, and the contract requires CDRL-METALSCERT documentation. Delivery is FOB origin with a 167-day deadline, a 10% variance in quantity allowed, inspection and acceptance occurring at destination, and shipment destination specified as DLA Distribution San Diego. The solicitation number is SPE8E4-26-T-1952, the NSN is 9510-00-500-5434, and the quantity ordered is 58 linear feet with a unit price of $58.00 per foot, totaling $3,364.00. The requirement is classified as a critical application item under a federal procurement with specific handling, marking, and certification obligations enforced by the Department of Defense.

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1993

This procurement specifies cold-finished, annealed steel bars made from Alloy E4340 with a diameter of 2.000 inches and lengths between 10 and 12 feet in whole-foot increments only, weighing approximately 10.680 pounds per foot. The material must conform to SAE AMS6415V revision V dated 11/01/2022 and meet additional requirements outlined in referenced standards such as SAE AMS2806 and QAP 13873. A Certificate of Quality Compliance, also known as mill-material certification, is mandatory for every shipment and must be provided to the customer or DLA depot, with a copy forwarded to the designated DLA Troop Support Contracting Officer. Packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with special preservation codes ZZ as defined by ASTM A700. Each unit must be clearly marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer name, heat and lot number, and dimensions using stamping or stenciling methods that ensure legibility, permanence, and resistance to contamination or degradation. Adhesive labels are required for bars under 0.250 inches in nominal diameter, while tags are acceptable for wire. Continuous identification markings are required on every unit of issue, and any shipment not fully compliant will be rejected. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support’s June 1994 requirements for FSGs 95 and 96; only approved QSLD distributors are eligible for award unless a formal deviation is declared. Products not sourced from approved QSLD distributors are considered unauthorized substitutions and may result in criminal penalties. The government waives source inspection for contracts fulfilled by qualified QSLD suppliers, and requirements related to quality conformance inspection, private verification, and certain attestations do not apply in these cases. The delivery contract is for 150 feet of material, delivered FOB origin within 91 days, with a 10% quantity variance allowed. The material is to be delivered to Robins Air Force Base, Georgia, and must be palletized in accordance with DLA packaging requirements. The solicitation number is SPE8E4-26-T-1993, and

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Packaging, Marking, and SDS ComplianceThe contract requires precise packaging and labeling of respirator units in full compliance with DLA RP001 standards, ensuring that each unit is properly prepared for safe transport and storage. Alongside physical preparation, the contractor must generate and submit accurate Safety Data Sheets for any hazardous materials included in or associated with the respirator units, adhering strictly to federal transport and handling regulations. This work is essential to maintain regulatory compliance and operational readiness for defense-related logistics. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA in accordance with FAR 19.5, meaning only small businesses are eligible to respond. It falls under NAICS code 561910, which classifies it within other support activities for air transportation, though the actual scope centers on packaging and compliance services. The solicitation was posted on August 5, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense under the Construction & Equipment MRO SVC I organization. All work must be performed in accordance with government specifications, and the primary focus remains on quality, compliance, and timely documentation.

Packaging and Labeling Services

POSTED

DEADLINE

Critical Safety Item (CSI) Sourcing and Traceability ComplianceThe contract requires the sourcing of critical safety items including filters, seals, and valves from approved vendors, ensuring full supply chain traceability and comprehensive documentation to comply with military Critical Safety Item (CSI) standards. All components must be procured with verifiable provenance, maintaining uninterrupted lineage from raw materials to final assembly to meet stringent defense requirements for reliability and accountability. The subcontract is designated as a Total Small Business Set-Aside under SBA regulations, exclusively available to small businesses as defined by the North American Industry Classification System code 423450, which pertains to merchant wholesalers of hardware, plumbing, and heating equipment. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the Department of Defense under the Construction & Equipment MRO SVC I procurement office, with performance expected to support defense maintenance, repair, and overhaul operations without a specified geographic location.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Reconditioned Respirator Outfit SupplyThe contract calls for the procurement, reconditioning, and delivery of 17 military-spec respirator outfits sourced from surplus government property, requiring full refurbishment to restore each unit to like-new condition. This includes comprehensive testing and certification to ensure all units meet established military standards for functionality, safety, and performance, with no compromises on quality or compliance. The work must be performed in accordance with exacting technical requirements to guarantee readiness for operational use by trained personnel. This opportunity is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 339113 indicating classification within medical equipment and supplies manufacturing. The solicitation was posted on August 5, 2026, with responses due by August 12, 2026, under the Department of Defense’s Construction & Equipment MRO SVC I program. All units must be delivered to an unspecified location within the United States, and while no point of contact or detailed address is provided, the procurement is accessible through the DIBBS system via the official RFQ link.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Cybersecurity and Covered Defense Information (CDI) SafeguardingThis contract requires the implementation of NIST SP 800-171 controls to safeguard Covered Defense Information (CDI) across all applicable systems and processes. The scope includes conducting comprehensive system assessments to verify compliance, establishing strict access controls to limit authorization to authorized personnel only, and ensuring timely cyber incident reporting in accordance with federal standards. The work must be performed at Tinker AFB with a zip code of 73145-8000, and all activities must align with the requirements of the Department of Defense under the Construction & Equipment MRO SVC I contracting vehicle. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses are eligible to respond. The North American Industry Classification System code is 541512, indicating the work falls under Computer Systems Design and Related Services. Responses are due by August 17, 2026, with the solicitation posted on August 5, 2026, and the contract is structured as a subcontract under a larger federal acquisition framework.

Computer Systems Design Services

POSTED

DEADLINE

Domestic and International Shipping with U.S.-Flag Vessel ComplianceThe contract requires comprehensive transportation and logistics management services with mandatory use of U.S.-flag vessels to deliver cargo to Tinker AFB, ensuring full compliance with the Jones Act and Department of Defense shipping regulations. All shipments must adhere to stringent federal maritime and military logistics standards, emphasizing domestic vessel usage and secure, timely delivery protocols. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses qualifying under SBA guidelines, with the NAICS code 483111 identifying it as water transportation of freight. Responses are due by August 17, 2026, following a posting date of August 5, 2026, and the place of performance is fixed at Tinker AFB with a ZIP code of 73145-8000. The contracting activity falls under the Department of Defense’s Construction & Equipment MRO SVC I office, which oversees maintenance, repair, and overhaul support services. While no specific point of contact is listed, the solicitation number SPE8E926T3355 provides the primary reference for submission and inquiries through the DIBBS system. All offerors must demonstrate proven capability in managing complex domestic and international shipping networks while maintaining strict adherence to U.S.-flag vessel requirements and DoD compliance frameworks.

Deep Sea Freight Transportation

POSTED

DEADLINE

Radioactive Materials Notification and Handling ComplianceThe contract requires comprehensive detection, labeling, and advance notification services for any items containing radioactive materials that exceed established regulatory thresholds as defined by the Department of Defense and the Nuclear Regulatory Commission. Performance must align strictly with federal safety and compliance standards to ensure secure handling, proper identification, and timely communication of radioactive content throughout the supply chain. The work is targeted at identifying and managing potential hazards before they reach sensitive DoD locations, with an emphasis on preventing exposure, enforcing regulatory adherence, and maintaining operational safety. This is a total small business set-aside subcontract under NAICS code 541350, open only to small businesses certified by the SBA, with a response deadline of August 17, 2026. The contract is issued under the Department of Defense’s Construction & Equipment MRO SVC I program and will be performed at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000. The solicitation, identified by the number SPE8E926T3355, was posted on August 5, 2026, and contractors must demonstrate proven capability in radiation detection technologies, regulatory compliance protocols, and secure logistics procedures to meet the stringent demands of defense-related radioactive material management.

Building Inspection Services

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract seeks specialized services for packaging hazardous materials, applying hazard warning labels, and preparing accurate Safety Data Sheets in full compliance with federal and military regulations. All work must adhere to stringent standards governing the safe handling, transportation, and documentation of dangerous goods, ensuring alignment with Department of Defense requirements and relevant hazardous materials transportation codes. The services are critical to supporting secure and compliant logistics operations for defense-related shipments. This is a small business set-aside subcontract under NAICS code 561910, exclusively available to small businesses as defined by the SBA. The opportunity was posted on August 5, 2026, with proposals due by August 17, 2026, and performance is expected to be centered at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment MRO SVC I office, and the successful vendor will be responsible for delivering all packaging, labeling, and SDS documentation services on time and to exacting quality standards to support military readiness and safety protocols.

Packaging and Labeling Services

POSTED

DEADLINE

Supply of NSN 4130014250526 Industrial Equipment ComponentThe contract involves the procurement, packaging, labeling, and delivery of six units of an industrial component identified by NSN 4130014250526, requiring full compliance with military specifications and hazardous materials handling standards. All activities must adhere to strict regulatory requirements to ensure safety, interoperability, and readiness for military use. The item is classified under NAICS code 333415, indicating it falls within the industrial machinery manufacturing sector, and the solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete. Performance is required at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, and the response deadline is August 17, 2026, with the solicitation posted on August 5, 2026. The contract type is a subcontract, and it is administered under the Department of Defense through the Construction & Equipment MRO SVC I office, with all logistics and delivery protocols governed by defense supply chain protocols.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Supply of Joint Pump Body (NSN: 4130011723178)The contract entails the procurement and delivery of two units of a Joint Pump Body, identified by NSN 4130011723178, a defense-specific mechanical component classified as a commercial off-the-shelf item. No integration, installation, or modification services are required; the supplier is solely responsible for delivering the completed units as specified. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is structured as a subcontract under the NAICS code 332999, covering other miscellaneous fabricated metal product manufacturing. The place of performance is specified as Tracy, California, with a ZIP code of 95304-5000, indicating where the delivered items must be shipped. The contracting agency is the Department of Defense, operating under the Construction & Equipment MRO SVC I organization, and the opportunity is accessible through the DIBBS platform.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Surveying and Layout ServicesA contract for topographic and construction layout surveying services is being solicited to support site development and grading activities at Tinker Air Force Base, with a postal code of 73145-8000. The solicitation, issued under the NAICS code 541370 for surveying services, is classified as a subcontract and was posted on August 5, 2026, with responses due by August 17, 2026. The contracting activity falls under the Department of Defense, specifically managed by the Construction & Equipment MRO SVC I organization, and the work will be performed exclusively at the designated military installation. No set-aside provisions or agency-specific requirements are identified, and all technical deliverables must align with the needs of site preparation, including precise elevation data and construction layout to ensure accurate grading and infrastructure development.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Paving and Asphalt ServicesThe contract is for the installation of asphalt pavement across roads, parking lots, and accessways under the title Paving and Asphalt Services, issued as a subcontract by the Department of Defense through its CONSTRUCTION & EQUIPMENT MRO SVC I office. The work is required to be performed at Tinker Air Force Base with a zip code of 73145-8000, and the solicitation is categorized under NAICS code 237310 which corresponds to Highway, Street, and Bridge Construction. The opportunity was posted on August 5, 2026, and all responses must be submitted by August 17, 2026, with no set-aside provisions specified. Interested parties should submit proposals via the provided DIBBS portal link to ensure timely consideration.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Site Grading and EarthworkThe contract titled Site Grading and Earthwork is a subcontract for excavation, grading, and soil stabilization work intended to prepare construction sites for future development. It is issued under NAICS code 237990 and managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I organization, with the place of performance specified as Tinker Air Force Base, Oklahoma, zip code 73145-8000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, providing a twelve-day window for contractors to submit proposals. The work requires specialized expertise in earthmoving and ground preparation to ensure site stability and compliance with construction readiness standards. No set-aside classification is specified, indicating the opportunity is open to all eligible subcontractors regardless of size or designation. Interested parties must access the full solicitation details through the provided DIBBS link to review technical specifications, performance requirements, and submission instructions.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE