Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Stainless Steel Sheet Supply

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DEPOT OKLAHOMA

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DEPOT OKLAHOMA

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of cold-rolled, annealed stainless steel sheets (Grade 304), 0.025-inch thick, meeting strict dimensional tolerances and certification requirements.

Similar Contracts

Same NAICS industry code

95--ARMOR PLATE

Solicitation # SPE8E426Q0367

The solicitation seeks armor plate with NSN 9515014849150 under a Small Business Set Aside, with a total requirement of three units to be delivered to DLA Distribution Red River within 365 days of award. Only approved source 10237 135257-66 is designated for this procurement, and quotes must be submitted electronically by the deadline of August 14, 2026. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided; all responsible sources are eligible to respond if their submissions are timely received. The solicitation number is SPE8E47Q0367, posted on August 6, 2026, and classified under NAICS code 331221 for rolled metal product manufacturing. The contracting office is the Department of Defense, DLA Troop Support, located in Philadelphia, Pennsylvania, with primary point of contact for inquiries directed via email to DibbsBSM@dla.mil, and further details accessible through the provided SAM.gov link.

DLA Troop Support

POSTED

about 8 hours ago

DEADLINE

95--ARMOR PLATE

Solicitation # SPE8E426Q0360

The U.S. Department of Defense, through DLA Troop Support, is seeking quotes for Armor Plate with NSN 9515014835217 under a Small Business Set Aside solicitation numbered SPE8E426Q0360. A total of six units are required, each to be delivered to W1A8 DLA Distribution within 180 days of award. The only approved source for this item is 10237 219243, and the solicitation is restricted to small businesses as defined by the SBA under NAICS code 331221. Quotes must be submitted electronically and received no later than August 14, 2026, and no hard copies of the solicitation are available. Only responsible sources may respond, and all timely submissions will be considered without the availability of detailed specifications, plans, or drawings. The point of contact for inquiries is DibbsBSM@dla.mil, and the full solicitation must be accessed via the SAM.gov link provided. The procurement office is located in Philadelphia, Pennsylvania.

DLA Troop Support

POSTED

about 8 hours ago

DEADLINE

95--ARMOR PLATE

Solicitation # SPE8E426Q0366

The contract seeks the procurement of 6 units of armor plate with NSN 9515014849150, to be delivered to DLA Distribution Red River within 365 days after award. The approved source for this item is identified as 10237 135257-66, and the solicitation is issued as a restricted RFQ under a Small Business Set Aside, meaning only small business concerns are eligible to compete. The NAICS code 331221 indicates the classification falls under Rolled Metal Product Manufacturing. All responsible small business sources may submit quotes electronically, and no hard copies of the solicitation are available. Technical specifications, plans, or drawings are not provided, so offerors must proceed based on the available information. The solicitation number is SPE8E426Q0366, posted on August 6, 2026, with responses due by August 14, 2026. The contracting office is DLA Troop Support located in Philadelphia, Pennsylvania, and inquiries must be directed via email to the designated buyer as specified in the solicitation's block 5 or through the provided DIBBS portal link.

DLA Troop Support

POSTED

about 8 hours ago

DEADLINE

Laminated Steel Shim Stock Manufacturing

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Stainless Steel Plate Manufacturing (ASTM A240 Grade 304)The contract requires the manufacture of hot-rolled, annealed stainless steel plates meeting ASTM A240 Grade 304 specifications, with precise dimensions of 0.250 inches in thickness, 50 inches in width, and 144 inches in length. The material must fully comply with applicable military material standards and be delivered with certified mill documentation confirming adherence to all technical and quality requirements. Production must align with industry best practices for austenitic stainless steel fabrication, ensuring consistent mechanical properties and corrosion resistance as defined by the referenced ASTM standard. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a place of performance in New Cumberland, Pennsylvania, postal code 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 331221 identifies the primary industrial classification as rolling and drawing of stainless steel. All work must be executed to meet federal defense procurement requirements, and the supplier is expected to provide full traceability and compliance documentation with delivery.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Defense-Grade Metal Sheet SupplyThe contract mandates the procurement and delivery of a single unit of a defense-grade metal sheet identified by NSN 9535016031832, with an absolute requirement for zero tolerance in quantity variance, ensuring precise adherence to the specified amount. All deliverables must fully comply with military packaging standards to guarantee integrity during transport and storage within defense logistics systems. The procurement is structured as a subcontract under NAICS code 331221, indicating fabrication of rolled metal products, and is managed by the Department of Defense through the Warner Robins office. Performance of the contract is to be completed at Robins AFB with a zip code of 31098-1887, reflecting the designated delivery location. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside provisions applicable. The contract is accessible via the DIBBS portal for qualified vendors to submit proposals under strict compliance requirements.

POSTED

DEADLINE

Precision Metal Sheet Supply – Corrosion-Resistant SteelThe contract seeks the supply of eight sheets of corrosion-resistant steel, specifically CRES 301 in 1/4 hard temper with a bright finish, each measuring 0.071 inches in thickness and 36 by 96 inches in dimension, to meet both military and commercial quality standards. The material must conform to precise mechanical and surface characteristics to ensure durability and performance in demanding environments, with compliance to applicable specifications as a non-negotiable requirement. All deliverables are expected to be fully traceable and certified to meet the integrity required for defense-related applications. The solicitation falls under the NAICS code 331221 for rolled metal product manufacturing and is issued as a subcontract by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I. The place of performance is designated as San Diego, California, with the delivery address specified as 92136-3581. The request for quotation was posted on August 5, 2026, and responses are due by August 17, 2026. Interested parties must submit proposals through the DIBBS portal at the provided link, ensuring all technical, logistical, and compliance criteria are addressed within the deadline to be considered for award.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Corrosion-Resistant Stainless Steel Plate SupplyThe contract calls for the supply of 0.250-inch thick stainless steel plates manufactured to ASTM A240 Grade 304 specifications, requiring the material to be hot rolled and annealed to meet precise mechanical and chemical properties. Strict compliance with dimensional tolerances and material integrity is mandatory, with a Certificate of Quality Compliance required to verify adherence to all technical standards. The plates are intended for use in corrosion-resistant applications under demanding environmental conditions, ensuring long-term performance and reliability. This subcontract, issued under NAICS code 331221 by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I program, specifies TINKER AFB, Oklahoma with ZIP code 73145-8000 as the place of performance. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026. The procurement is being managed through the DIBBS portal, and bidders are expected to meet all federal supply and quality assurance requirements without exception.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E6-26-T-4078

DLA issues a solicitation for 200 ground stakes under contract SPE8E6-26-T-4078, with the NSN 5660-01-457-9755 and part number NO.3 REBAR GRADE 60, to be delivered FOB origin within 39 days of contract award, with a required delivery date of August 5, 2026. The quantity is fixed at 200 units with zero variance allowed, and inspection and acceptance occur at the destination warehouse located at 25600 S Chrismann Road, Tracy, CA 95304-5000. Packaging must comply with ASTM D3951 as supplemented by all applicable DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. All packaging and labeling must adhere strictly to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements, with the Unit of Issue being each and the Quantity per Unit Pack specified as QUP:025. The contractor is Allied Tube & Conduit Corp based in Harvey, IL, and the contract incorporates referenced technical and quality requirements identified by R or I numbers from the official DLA master list. Transportation details are governed by DLAD Proc Note C19 and C20, and the delivery address matches the freight shipping and parcel post destination. The solicitation is open for response until August 17, 2026, with point of contact Tai Nguyen at DLA Dist San Joaquin for inquiries.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1971

The contract specifies the procurement of 6 sheets of austenitic stainless steel, cold rolled, conforming to Composition 301 in annealed condition with sheared edges, each measuring 0.090 inches thick, 36 inches wide, and 120 inches long, weighing approximately 114.75 pounds per sheet. All material must strictly adhere to the exact dimensional requirements without tolerance for test coupons, and must be supplied in whole-foot lengths only. Continuous identification markings are mandatory on every unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluids that remain legible after normal handling, and adhesive labels are required for smaller bars and tubes under 0.250 inches in nominal outer diameter. A Certificate of Quality Compliance—commonly known as a mill-material certification—must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. The material must comply with ASTM A666/A666M-24 and SAE AMS2807C standards as referenced in the Technical Data Package, and packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines, with special preservation code ZZ per ASTM A700. Packaging must prevent physical damage and include appropriate bracing and dunnage compatible with the metal’s requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and non-compliance constitutes an unauthorized substitution with potential criminal penalties. The solicitation waives source inspection requirements for QSLD-compliant suppliers, relieving them of additional quality conformance inspections. The delivery is FOB origin with a strict 11-day lead time, requiring shipment to the DLA Distribution facility in New Cumberland, Pennsylvania, by August 7, 2026, with zero quantity variance permitted. All documentation, including CDRL-METALSCERT, must be submitted as required, and failure to meet any specification will result in rejection of the product.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1952

This contract specifies the procurement of steel bars composed of Steel Comp 630, round in shape, centerless ground, with a diameter of 2.250 inches and lengths between 10 and 12 feet in whole-foot increments only, weighing approximately 13.520 pounds per foot. The material must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including the Certificate of Quality Compliance which must accompany each shipment and be forwarded to the contracting officer. Continuous identification markings are mandatory on every unit, including the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stenciling or stamping using waterproof, non-contaminating fluids that remain legible and stable under normal handling; adhesive labels are required for bars under 0.250 inches in nominal OD. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with special codes Z and ZZ as defined by ASTM A700, and palletization must follow DLA packaging directives. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96, and failure to comply renders the bid non-compliant and subject to rejection. Suppliers not on the QSLD must explicitly declare their deviation, and any product sourced from an unauthorized distributor is considered an unauthorized substitution with potential criminal penalties. The technical data package references SAE AMS5643W and SAE AMS2806, and the contract requires CDRL-METALSCERT documentation. Delivery is FOB origin with a 167-day deadline, a 10% variance in quantity allowed, inspection and acceptance occurring at destination, and shipment destination specified as DLA Distribution San Diego. The solicitation number is SPE8E4-26-T-1952, the NSN is 9510-00-500-5434, and the quantity ordered is 58 linear feet with a unit price of $58.00 per foot, totaling $3,364.00. The requirement is classified as a critical application item under a federal procurement with specific handling, marking, and certification obligations enforced by the Department of Defense.

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1993

This procurement specifies cold-finished, annealed steel bars made from Alloy E4340 with a diameter of 2.000 inches and lengths between 10 and 12 feet in whole-foot increments only, weighing approximately 10.680 pounds per foot. The material must conform to SAE AMS6415V revision V dated 11/01/2022 and meet additional requirements outlined in referenced standards such as SAE AMS2806 and QAP 13873. A Certificate of Quality Compliance, also known as mill-material certification, is mandatory for every shipment and must be provided to the customer or DLA depot, with a copy forwarded to the designated DLA Troop Support Contracting Officer. Packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with special preservation codes ZZ as defined by ASTM A700. Each unit must be clearly marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer name, heat and lot number, and dimensions using stamping or stenciling methods that ensure legibility, permanence, and resistance to contamination or degradation. Adhesive labels are required for bars under 0.250 inches in nominal diameter, while tags are acceptable for wire. Continuous identification markings are required on every unit of issue, and any shipment not fully compliant will be rejected. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support’s June 1994 requirements for FSGs 95 and 96; only approved QSLD distributors are eligible for award unless a formal deviation is declared. Products not sourced from approved QSLD distributors are considered unauthorized substitutions and may result in criminal penalties. The government waives source inspection for contracts fulfilled by qualified QSLD suppliers, and requirements related to quality conformance inspection, private verification, and certain attestations do not apply in these cases. The delivery contract is for 150 feet of material, delivered FOB origin within 91 days, with a 10% quantity variance allowed. The material is to be delivered to Robins Air Force Base, Georgia, and must be palletized in accordance with DLA packaging requirements. The solicitation number is SPE8E4-26-T-1993, and

POSTED

DEADLINE

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

Instruction Plate Manufacturing and DeliveryThe contract requires the manufacture and delivery of three military instruction plates identified by NSN 9905008816118, fully compliant with the technical data package TDP Rev A Gen 1 and all referenced part numbers and marking standards. The work must be executed to meet stringent military specifications, ensuring each unit is accurately produced and labeled in accordance with established guidelines. This is a subcontract under the NAICS code 332320, indicating classification within the other fabricated metal product manufacturing sector, and is issued by the Department of Defense through the agency known as DEPOT OKLAHOMA. Performance is to occur at TINKER AFB with a ZIP code of 73145-8000, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. The opportunity is not set aside for any specific small business category, and interested parties must submit proposals via the designated DIBBS portal before the stated deadline.

POSTED

DEADLINE

Certification & Quality Documentation (CDRL-METALSCERT)The contract requires the preparation and submission of a Certificate of Quality Compliance under CDRL-METALSCERT, aligned with DD Form 1423, to verify that all materials meet stringent quality standards. This includes providing full material traceability, documented test results, and explicit confirmation of compliance with SAE AMS6411K specifications, ensuring that all metallic components are manufactured and tested to precise aerospace industry requirements. The documentation must be thorough, accurate, and fully auditable to satisfy the Department of Defense’s quality assurance protocols. The contract is issued under the NAICS code 541380 and is classified as a subcontract tied to the Department of Defense, specifically managed by Depot Oklahoma at Tinker AFB with a postal code of 73145-8000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, indicating a tight turnaround for compliance and submission. All deliverables must be prepared and transmitted through the DIBBS platform using the provided link, and failure to meet the specified technical, traceability, or documentation requirements could result in non-compliance and potential contract penalties.

Testing Laboratories and Services

POSTED

DEADLINE

Marking & Labeling ServicesThe contract requires the application of continuous, legible, and waterproof markings on each bar in strict compliance with MIL-STD-129 standards, ensuring that each item is labeled with the National Stock Number, contract number, and heat or lot number using approved marking methods. This work must be performed with precision to meet military specification requirements for identifiability and durability under operational conditions. The contract is issued under the NAICS code 811411 by the Department of Defense through DEPOT OKLAHOMA, with performance located at TINKER AFB, 73145-8000. It is classified as a subcontract and was posted on August 5, 2026, with proposals due by August 17, 2026. All marking activities must adhere to the specified government standards and be executed in a manner that ensures uniformity, traceability, and long-term readability in the field.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Packaging & Preservation ServicesThe contract requires comprehensive packaging and preservation services for steel bars in strict accordance with MIL-STD-2073-1E and ASTM A700 standards, ensuring that all materials are protected against corrosion, damage, and environmental degradation during storage and transit. Preservation codes Z and ZZ must be applied to meet specified protective requirements, and all work must comply with DLA RP001 standards to guarantee operational readiness and uniformity across Defense Logistics Agency shipments. The scope encompasses end-to-end packaging processes including materials handling, labeling, crating, and documentation to ensure full traceability and compliance. This subcontract, issued by the Department of Defense under the agency name DEPOT OKLAHOMA, is tied to a performance location at Tinker AFB with a ZIP code of 73145-8000 and falls under the NAICS code 561910 for other support activities. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 17, 2026. All proposers must be prepared to demonstrate technical capability, quality assurance practices, and adherence to military packaging specifications, with no set-aside provisions indicated. The contract is accessible via the DIBBS portal on the provided URL for detailed submission instructions and supplementary requirements.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Cutting & Length ConformanceThe contract requires the precision cutting of steel bars to exact whole-foot lengths between 10 and 12 feet, with stringent dimensional accuracy and clean finishes to comply with military specifications. The work must ensure consistent quality and conformance to technical standards expected in defense applications, where even minor deviations in length or cut integrity could compromise performance or integration. This subcontract is issued under NAICS code 332312, indicating it falls within the forged and stamped metal manufacturing sector, and is managed by the Department of Defense through its depot at Tinker Air Force Base, Oklahoma, with performance required at the 73145-8000 ZIP code location. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is actively open for bid submissions. No set-aside classification is specified, meaning eligibility is open to all qualified contractors, regardless of business size or ownership status. The contracting office is based at Tinker AFB, a major aerospace and logistics hub for the U.S. military, underscoring the operational criticality of the deliverables. All work must be performed in accordance with military-grade tolerances, and failure to meet dimensional or finish requirements may result in rejection of the product and potential contract penalties.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Steel Bar Manufacturing & Supply (UNS K23080)The contract calls for the manufacture and supply of round steel bars made from UNS K23080 material, with a precise diameter of 1.250 inches and lengths ranging between 10 and 12 feet, delivered in whole-foot increments. All bars must fully comply with the SAE AMS6411K specification, ensuring the material meets stringent metallurgical and mechanical requirements for performance and consistency. The work is scoped as a subcontract under the NAICS code 331110, indicating it relates to steel mills and ferroalloy manufacturing, and is being procured by the Department of Defense through the Oklahoma Depot at Tinker AFB, with the delivery address set to 73145-8000. Proposals are due by August 17, 2026, with the solicitation posted on August 5, 2026, providing a twelve-day response window for qualified suppliers. The contract is not subject to any specific set-aside provisions, making eligibility open to all competent manufacturers. Performance must be executed to meet or exceed the referenced aerospace and defense standards, given the critical nature of the material for defense applications. Delivery must align with the specified dimensions, tolerances, and material certification requirements, and the successful vendor will be expected to support inspection, testing, and documentation compliance as demanded by the Department of Defense procurement process.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Certificate of Quality Compliance and Inspection SupportThis contract requires suppliers to provide a Certificate of Quality Compliance with every shipment, ensuring all delivered goods meet specified quality standards and include complete traceability data to support accountability and regulatory compliance. For suppliers not enrolled in the Qualified Supplier List for Defense (QSLD), third-party inspections may be mandated to verify conformance, adding an additional layer of oversight to maintain defense supply chain integrity. The requirement emphasizes documentation rigor and transparency, with traceability data critical for audit readiness and risk mitigation across the logistics pipeline. The contract, titled Certificate of Quality Compliance and Inspection Support, is a subcontract under NAICS code 541380, issued by the Department of Defense through DEPOT OKLAHOMA, with performance centered at TINKER AFB, ZIP 73145-8000. Solicitation opened on August 5, 2026, with a response deadline of August 17, 2026. While no set-aside type is specified, the contract is accessible to eligible subcontractors who can deliver compliant quality documentation and, when required, facilitate third-party inspection services. All submissions must adhere to the technical and procedural expectations outlined in the solicitation to ensure alignment with defense logistics standards.

Testing Laboratories and Services

POSTED

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires strict adherence to hazard communication standards for aluminum alloy materials that pose a combustible dust risk during processing, specifically mandating compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200 under the Globally Harmonized System of Classification and Labeling of Chemicals. All applicable hazard warning labels must be accurately applied to ensure proper identification of dust-related combustion hazards throughout the handling, storage, and processing lifecycle. This obligation extends to all subcontractors and personnel involved in the handling of these materials, with full documentation and verification of label accuracy and placement required. The solicitation is a subcontract under the Department of Defense, managed by DEPOT OKLAHOMA at TINKER AFB with a zip code of 73145-8000, and falls under the NAICS code 541690 for other scientific and technical consulting services. The posting date is August 5, 2026, and responses are due by August 17, 2026. The contract does not specify a set-aside designation, and all submissions must be made through the designated DIBBS portal link. Compliance is non-negotiable and failure to meet labeling requirements may result in rejection of deliverables or contractual penalties.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging, Preservation, and MarkingThe contract requires comprehensive packaging, preservation, and marking of aluminum materials in strict adherence to MIL-STD-129, MIL-STD-2073-1E, RP001, and ASTM B660 standards, ensuring all materials are properly labeled, palletized, and protected for military use. The work encompasses the full lifecycle of packaging compliance, from material handling and corrosion prevention to the accurate application of markings and documentation required by federal military specifications. All activities must support secure, traceable, and durable storage and transport under demanding conditions. The solicitation is classified as a subcontract under NAICS code 493190 and is issued by the Department of Defense through DEPOT OKLAHOMA, with performance required at TINKER AFB, Oklahoma, 73145-8000. The response deadline is August 17, 2026, and interested parties must ensure full compliance with all technical and procedural requirements outlined in the referenced military and industry standards. The contract does not specify a set-aside type, and no point of contact details are provided in the available data.

Other Warehousing and Storage

POSTED

DEADLINE

Aluminum Structural Angle Supply (6061-T6 Alloy)The contract calls for the supply of approximately 901 feet of aluminum structural angle measuring 3.00 inches by 3.00 inches with a 0.250 inch wall thickness, with allowable length variations between 20 and 30 feet and a tolerance of ±10% on total quantity. All material must be manufactured from 6061-T6 aluminum alloy and comply with the technical specifications outlined in SAE AMS-QQ-A-200C and ASTM B666/B666M-20 to ensure structural integrity and consistent performance. The materials are intended for use in defense-related applications, as indicated by the procurement under the Department of Defense through the Depot Oklahoma office, with performance required at Tinker Air Force Base, Oklahoma, ZIP 73145-8000. The solicitation is classified as a subcontract and was posted on August 5, 2026, with responses due by August 17, 2026. The North American Industry Classification System code 331311 identifies the industry as Aluminum Die and Foundry Products Manufacturing, reinforcing the focus on precision metal fabrication. There is no set-aside designation specified, and the contract is open to eligible suppliers who can meet the stringent material standards and delivery timelines. The full solicitation details and submission process are accessible through the DIBBS platform using the reference number SPE8E426T1975.

Alumina Refining

POSTED

DEADLINE

Aluminum Alloy Alclad Sheet ManufacturingThe contract involves the manufacture and supply of aluminum alloy Alclad sheets adhering strictly to military specifications, with exact requirements for dimensions, cladding thickness, and temper designation to ensure performance and durability under demanding operational conditions. The materials must meet rigorous quality standards to support defense applications, and the production process must verify compliance with established technical criteria throughout all phases of fabrication. The contract is a subcontract issued under the NAICS code 331491, with performance obligated at Tinker Air Force Base, Oklahoma, and a response deadline of August 17, 2026. The contracting entity is the Department of Defense through the Depot Oklahoma office, and the solicitation is managed through the DIBBS system under reference SPE8E426T1945. All proposals must be submitted prior to the deadline to be considered, and suppliers are expected to demonstrate proven capability in producing military-grade Alclad sheets to support critical defense infrastructure.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

DEADLINE

Specialized Packaging, Preservation, and MarkingThe contract requires specialized packaging, preservation, and marking of metal sheets in full compliance with ASTM A700, MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring the materials are protected against environmental degradation and maintained in mission-ready condition. This includes secure palletization methods and the application of NSN labeling to meet military logistics and inventory tracking protocols. All work must be performed to guarantee the integrity of the metal sheets during storage and transit, with strict adherence to defense-specific documentation and handling procedures. The solicitation is issued under a subcontract type by the Department of Defense through the Depot Oklahoma office, with performance required at Tinker AFB, Oklahoma, ZIP 73145-8000. The North American Industry Classification System code is 423840, indicating a focus on wholesale trade in metals and minerals. The response deadline is August 17, 2026, and the opportunity was posted on August 5, 2026, providing potential bidders approximately twelve days to prepare and submit their proposals. There is no set-aside designation specified, and the contract is open to eligible subcontractors capable of meeting the rigorous defense packaging and labeling requirements.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE