Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Compliant Packaging, Preservation, and Marking

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive packaging, preservation, and marking of aluminum materials in strict adherence to MIL-STD-129, MIL-STD-2073-1E, RP001, and ASTM B660 standards, ensuring all materials are properly labeled, palletized, and protected for military use. The work encompasses the full lifecycle of packaging compliance, from material handling and corrosion prevention to the accurate application of markings and documentation required by federal military specifications. All activities must support secure, traceable, and durable storage and transport under demanding conditions. The solicitation is classified as a subcontract under NAICS code 493190 and is issued by the Department of Defense through DEPOT OKLAHOMA, with performance required at TINKER AFB, Oklahoma, 73145-8000. The response deadline is August 17, 2026, and interested parties must ensure full compliance with all technical and procedural requirements outlined in the referenced military and industry standards. The contract does not specify a set-aside type, and no point of contact details are provided in the available data.

General Info

Pack aluminum per MIL-STD-129, MIL-STD-2073-1E, RP001, ASTM B660 for Tinker AFB by August 17, 2026.

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DEPOT OKLAHOMA

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DEPOT OKLAHOMA

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Packaging, preservation, and marking of aluminum materials per MIL-STD-129, MIL-STD-2073-1E, RP001, and ASTM B660, including labeling and palletization.

Similar Contracts

Same NAICS industry code

FUEL SERVICES AND OPERATIONS SUPPORT IN WEST OHAU, HAWAII

Solicitation # SPE603-26-R-5X69

The U.S. Department of Defense, through the Defense Logistics Agency Energy, is seeking information on industry capabilities to support fuel services and operations in West Oahu, Hawaii, under Request for Information SPE603-26-R-5X69. The Government requires a single facility capable of receiving, storing, adding additives to, and shipping up to 3.5 million barrels annually of U.S. Government-owned aviation turbine fuels—Jet-A, JP-5, and F-76—with a minimum storage capacity of 1.5 million barrels. Operations must support multiple delivery and distribution methods including tanker/barge, pipeline connections to Joint Base Pearl Harbor-Hickam and the Red Hill tank farm, and tank truck shipments, with full nighttime operational capability. All activities must be conducted at one consolidated location. This is strictly an information-gathering effort with no solicitation, commitment, or award intended. Interested firms must submit a company profile including employee count, last three years of revenue, business size, DUNS/CAGE code, and current business status, along with a detailed capability statement demonstrating experience in Contractor-Owned, Contractor-Operated fuel storage and management. Past performance on similar contracts, whether as prime or subcontractor, must be provided with contract numbers, agency or client names, period of performance, dollar value, contract type, and description of services rendered. Submissions must include the exact facility location in West Oahu, Hawaii, and be emailed to Claude Johnson by 3:00 P.M. local Fort Belvoir, VA time on August 21, 2026, with the RFI number in the subject line. Questions may be directed to the Contract Specialist or Contracting Officer listed, and all responses must comply with the specified format and content requirements.

POSTED

about 8 hours ago

DEADLINE

COCO Fuel Operations at Luke AFB, AZ

Solicitation # SPE603-26-R-5X68

The Defense Logistics Agency - Energy - FESBA is conducting market research through a Sources Sought notice to evaluate industry capabilities for Contractor-Owned, Contractor-Operated (COCO) fuel services at Luke Air Force Base, Arizona. This initiative seeks information from qualified firms capable of providing comprehensive bulk and retail refueling operations, including the receipt, storage, handling, and issuance of fuel products such as MRR and DS2 unleaded gasoline, with a capacity to serve at least 50 vehicle combinations per hour and support monthly volumes of 70,000 gallons combined. The successful contractor will be responsible for managing all aspects of fuel facility operations, including equipment maintenance, quality control, personnel deployment with required clearances, and ensuring facilities are designed to accommodate heavy tactical vehicles up to 40 tons. The anticipated contract duration is 29.5 years, requiring proposers to demonstrate not only operational capability but also substantial financial stability to sustain operations for at least 13 months post-award without government reimbursement, as well as the financial strength to support multi-decade obligations. Companies interested in responding must submit a voluntary, five-page capability statement that includes organizational details such as employee count, revenue history over the past three years, DUNS/CAGE codes, business size, and current status, alongside a detailed explanation of their capacity to own and operate fuel storage and dispensing infrastructure. Responses must address financial readiness to fund upfront capital investments and operational costs for over a year prior to receiving government payments, and must clearly identify the physical location of the proposed facility. All submissions must reference the RFI number SPE603-26-R-5X68 in the email subject line and be sent to Ms. Sadia Ayub by the deadline of 3:00 PM local time on August 26, 2026. This notice is strictly for market research and does not constitute a solicitation, quote request, or guarantee of future procurement; the government will not reimburse respondents for any costs incurred, and responses will be used solely to assess market availability, competitive potential, and optimal acquisition strategies for an upcoming Request for Proposal.

POSTED

about 8 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging, preservation, marking, and palletization services for a propeller parts kit, strictly adhering to MIL-STD-2073-1E for military packaging and preservation, MIL-STD-129 for labeling and marking of military shipments, and DLA RP001 for defense logistics agency procurement standards. All work must meet exacting military specifications to ensure the integrity, traceability, and readiness of components during storage and transit. The services are to be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and are classified as a subcontract under NAICS code 493190, which pertains to other warehousing and storage activities. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Fluid Handling Division within the Department of Defense.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military Packaging, Labeling, and Barcoding ServicesThe contract requires comprehensive packaging, marking, and barcoding of military units in full compliance with MIL-STD-129 and MIL-STD-2073-1E standards, with specific emphasis on the accurate application of Data Matrix barcodes and adherence to DLA RP001 requirements. All work must ensure proper identification, traceability, and readiness of materials for military logistics operations, with strict adherence to federal specifications governing packaging integrity, labeling clarity, and barcode readability. The solicitation is issued as a subcontract under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, with performance required at Tracy, California, 95304-5000. Bids must be submitted by the deadline of August 13, 2026, and the opportunity is accessible via the DIBBS portal. The contract does not specify a set-aside classification or point of contact, and all proposers are expected to meet the technical, regulatory, and logistical standards outlined in the referenced military standards without deviation.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging, Labeling, and Shipping of Defense SuppliesThe contract requires compliant packaging, labeling, and shipment of mounting plates in accordance with DLA standards, specifically MIL-STD-129 for military labeling, ASTM D3951 for commercial packaging, and RP001 palletization guidelines to ensure uniformity and readiness for military logistics. All work must adhere strictly to these specifications to guarantee proper identification, handling, and traceability throughout the defense supply chain. The items are to be delivered to a designated performance location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, ensuring alignment with DLA’s logistical infrastructure and warehouse reception protocols. This is a subcontract solicitation under NAICS code 493190, issued by the Department of Defense through the Land Supply Chain organization, with a response deadline of August 19, 2026. The solicitation is open for submissions and requires contractors to demonstrate capability in meeting rigorous defense packaging and transportation benchmarks. The absence of set-aside designation suggests it is open to all qualified small and large businesses, and all proposals must be submitted via the DIBBS portal using the provided link before the deadline to be considered for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Packaging & Preservation ServicesThe contract requires the packaging and preservation of gaskets in strict compliance with MIL-STD-2073-1E, emphasizing climate-controlled drying processes and UV-protective bagging to ensure long-term integrity and environmental resilience. All packaging must adhere to MIL-STD-129 requirements for labeling and barcoding, ensuring traceability and seamless integration into military logistics systems. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under NAICS code 493190. The opportunity was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense under the Land Supplier Operations Vehicle Support agency. All submissions must meet the exacting standards for defense-grade packaging without exception, and the contract is open to eligible subcontractors through the DIBBS platform.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires specialized packaging, preservation, labeling, and bar-coding services for precision milling cutters in full compliance with MIL-STD-129, ASTM D3951, and RP001 standards, ensuring all items meet Department of Defense requirements for durable, traceable, and environmentally protected shipment. The work must include proper identification through standardized labeling and bar-code systems that enable seamless integration into DLA’s distribution network, with strict adherence to military and industry specifications for material preservation during transit and storage. Performance is to be executed at the New Cumberland, Pennsylvania facility with a zip code of 17070-5002, and the task is structured as a subcontract under NAICS code 493190. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the agency issuing the requirement being the Department of Defense through the DDSP New Cumberland Facility. All submissions must satisfy technical and procedural criteria mandated for federal defense logistics operations.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Packaging and Preservation ServicesThe contract solicits subcontractor services for the cleaning, preservation, packaging, marking, and palletizing of finished forged components in full compliance with military standards. These services are essential to ensure the integrity, protection, and proper identification of components throughout storage and transportation, adhering to stringent defense requirements. The work is to be performed at a specified location in San Diego, California, with the zip code 92136-3581, and all activities must align with applicable government specifications for defense logistics and material handling. This is a subcontract opportunity under the NAICS code 493190, classified as a non-set-aside procurement, with a response deadline of August 12, 2026. The solicitation is managed by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MANU & CON, indicating the components are likely intended for military equipment or infrastructure systems. Interested parties must submit responses by the specified deadline through the DIBBS portal, and performance expectations will center on precision, traceability, and compliance with military-grade packaging and preservation protocols to maintain component readiness and operational effectiveness.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Military-Grade Packaging and Labeling ServicesThe contract requires comprehensive packaging, labeling, and marking services for military hardware in strict compliance with MIL-STD-129, MIL-STD-130N, and ASTM D3951 standards, ensuring all items are properly prepared for secure and traceable shipment. This includes the application of barcode labeling for asset tracking, accurate identification and标记 of hazardous materials, and unitization practices that facilitate efficient handling and logistics. All work must adhere to Department of Defense specifications to maintain readiness and interoperability across military supply chains. The solicitation is issued under the NAICS code 493190 for Other Warehousing and Storage and is classified as a subcontract opportunity. The place of performance is designated as Corpus Christi, Texas, with a 78419-5255 ZIP code, indicating the physical location where all services must be executed. The contract was posted on August 5, 2026, and responses are due by August 13, 2026, with the contracting entity being the ASC Commodities Division under the Department of Defense. All parties must be prepared to meet exacting military logistics requirements in this critical support role.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-STD-129 Packaging and Labeling ServicesThe contract requires full compliance with MIL-STD-129 for the packaging, marking, and labeling of military shipments destined for the Department of Defense, specifically managed by the DDSP NEW CUMBERLAND FACILITY. All activities must meet stringent DLA logistics standards to ensure accurate identification, tracking, and handling of materiel throughout the military supply chain. The work involves precise application of barcodes, uniform labeling formats, and secure packaging methods as dictated by the military standard to maintain interoperability and readiness across defense operations. This is a subcontract opportunity with a NAICS code of 493190, indicating it relates to other support activities for warehousing and storage. The proposal response deadline is August 17, 2026, and performance will be conducted at the New Cumberland facility with ZIP code 17070-5002. The solicitation is listed on the DIBBS platform and is part of ongoing efforts to uphold standardized logistics procedures within the military infrastructure, with no specific set-aside provisions indicated.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Hazardous Materials Handling and LabelingThis contract requires comprehensive labeling, packaging, and handling of hazardous materials in strict compliance with OSHA HazCom and MIL-STD-129 standards to ensure safe and standardized procedures across all operations. The work is designated as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 493190 indicating warehousing and storage services for hazardous materials. Performance of the contract is specifically located at BREMERTON, WA, 98314-6001, and all activities must adhere to federal regulations for hazardous material safety, documentation, and transportation labeling. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is administered by the Department of Defense through the LAND SUPPLY CHAIN organization.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Packaging, Marking, and Hazardous Materials HandlingThe contract requires full compliance with MIL-STD standards for the packaging, preservation, labeling, and hazardous materials documentation of battery shipments destined for military locations, ensuring all procedures meet rigorous defense logistics requirements. This subcontract is a total small business set-aside under the SBA program, limiting eligibility to qualified small businesses and emphasizing support for small business participation in defense supply chains. The NAICS code 493190 identifies the work under Other Support Activities for Transportation, reflecting logistics and handling services critical to defense operations. The place of performance is designated as FPO 09565, indicating shipments will be delivered to U.S. military facilities overseas, likely through military postal channels. All work must adhere to strict safety and regulatory standards for hazardous materials, particularly batteries, which demand precise labeling, containment, and documentation to ensure safe transport and handling. The opportunity was posted on August 5, 2026, with a response deadline of August 14, 2026, giving potential bidders approximately nine days to submit proposals. The contract is managed by the Defense Logistics Agency under the Department of Defense, underscoring its importance to the broader military supply chain and operational readiness.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

Instruction Plate Manufacturing and DeliveryThe contract requires the manufacture and delivery of three military instruction plates identified by NSN 9905008816118, fully compliant with the technical data package TDP Rev A Gen 1 and all referenced part numbers and marking standards. The work must be executed to meet stringent military specifications, ensuring each unit is accurately produced and labeled in accordance with established guidelines. This is a subcontract under the NAICS code 332320, indicating classification within the other fabricated metal product manufacturing sector, and is issued by the Department of Defense through the agency known as DEPOT OKLAHOMA. Performance is to occur at TINKER AFB with a ZIP code of 73145-8000, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. The opportunity is not set aside for any specific small business category, and interested parties must submit proposals via the designated DIBBS portal before the stated deadline.

POSTED

DEADLINE

Certification & Quality Documentation (CDRL-METALSCERT)The contract requires the preparation and submission of a Certificate of Quality Compliance under CDRL-METALSCERT, aligned with DD Form 1423, to verify that all materials meet stringent quality standards. This includes providing full material traceability, documented test results, and explicit confirmation of compliance with SAE AMS6411K specifications, ensuring that all metallic components are manufactured and tested to precise aerospace industry requirements. The documentation must be thorough, accurate, and fully auditable to satisfy the Department of Defense’s quality assurance protocols. The contract is issued under the NAICS code 541380 and is classified as a subcontract tied to the Department of Defense, specifically managed by Depot Oklahoma at Tinker AFB with a postal code of 73145-8000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, indicating a tight turnaround for compliance and submission. All deliverables must be prepared and transmitted through the DIBBS platform using the provided link, and failure to meet the specified technical, traceability, or documentation requirements could result in non-compliance and potential contract penalties.

Testing Laboratories and Services

POSTED

DEADLINE

Marking & Labeling ServicesThe contract requires the application of continuous, legible, and waterproof markings on each bar in strict compliance with MIL-STD-129 standards, ensuring that each item is labeled with the National Stock Number, contract number, and heat or lot number using approved marking methods. This work must be performed with precision to meet military specification requirements for identifiability and durability under operational conditions. The contract is issued under the NAICS code 811411 by the Department of Defense through DEPOT OKLAHOMA, with performance located at TINKER AFB, 73145-8000. It is classified as a subcontract and was posted on August 5, 2026, with proposals due by August 17, 2026. All marking activities must adhere to the specified government standards and be executed in a manner that ensures uniformity, traceability, and long-term readability in the field.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Packaging & Preservation ServicesThe contract requires comprehensive packaging and preservation services for steel bars in strict accordance with MIL-STD-2073-1E and ASTM A700 standards, ensuring that all materials are protected against corrosion, damage, and environmental degradation during storage and transit. Preservation codes Z and ZZ must be applied to meet specified protective requirements, and all work must comply with DLA RP001 standards to guarantee operational readiness and uniformity across Defense Logistics Agency shipments. The scope encompasses end-to-end packaging processes including materials handling, labeling, crating, and documentation to ensure full traceability and compliance. This subcontract, issued by the Department of Defense under the agency name DEPOT OKLAHOMA, is tied to a performance location at Tinker AFB with a ZIP code of 73145-8000 and falls under the NAICS code 561910 for other support activities. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 17, 2026. All proposers must be prepared to demonstrate technical capability, quality assurance practices, and adherence to military packaging specifications, with no set-aside provisions indicated. The contract is accessible via the DIBBS portal on the provided URL for detailed submission instructions and supplementary requirements.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Cutting & Length ConformanceThe contract requires the precision cutting of steel bars to exact whole-foot lengths between 10 and 12 feet, with stringent dimensional accuracy and clean finishes to comply with military specifications. The work must ensure consistent quality and conformance to technical standards expected in defense applications, where even minor deviations in length or cut integrity could compromise performance or integration. This subcontract is issued under NAICS code 332312, indicating it falls within the forged and stamped metal manufacturing sector, and is managed by the Department of Defense through its depot at Tinker Air Force Base, Oklahoma, with performance required at the 73145-8000 ZIP code location. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is actively open for bid submissions. No set-aside classification is specified, meaning eligibility is open to all qualified contractors, regardless of business size or ownership status. The contracting office is based at Tinker AFB, a major aerospace and logistics hub for the U.S. military, underscoring the operational criticality of the deliverables. All work must be performed in accordance with military-grade tolerances, and failure to meet dimensional or finish requirements may result in rejection of the product and potential contract penalties.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Steel Bar Manufacturing & Supply (UNS K23080)The contract calls for the manufacture and supply of round steel bars made from UNS K23080 material, with a precise diameter of 1.250 inches and lengths ranging between 10 and 12 feet, delivered in whole-foot increments. All bars must fully comply with the SAE AMS6411K specification, ensuring the material meets stringent metallurgical and mechanical requirements for performance and consistency. The work is scoped as a subcontract under the NAICS code 331110, indicating it relates to steel mills and ferroalloy manufacturing, and is being procured by the Department of Defense through the Oklahoma Depot at Tinker AFB, with the delivery address set to 73145-8000. Proposals are due by August 17, 2026, with the solicitation posted on August 5, 2026, providing a twelve-day response window for qualified suppliers. The contract is not subject to any specific set-aside provisions, making eligibility open to all competent manufacturers. Performance must be executed to meet or exceed the referenced aerospace and defense standards, given the critical nature of the material for defense applications. Delivery must align with the specified dimensions, tolerances, and material certification requirements, and the successful vendor will be expected to support inspection, testing, and documentation compliance as demanded by the Department of Defense procurement process.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Certificate of Quality Compliance and Inspection SupportThis contract requires suppliers to provide a Certificate of Quality Compliance with every shipment, ensuring all delivered goods meet specified quality standards and include complete traceability data to support accountability and regulatory compliance. For suppliers not enrolled in the Qualified Supplier List for Defense (QSLD), third-party inspections may be mandated to verify conformance, adding an additional layer of oversight to maintain defense supply chain integrity. The requirement emphasizes documentation rigor and transparency, with traceability data critical for audit readiness and risk mitigation across the logistics pipeline. The contract, titled Certificate of Quality Compliance and Inspection Support, is a subcontract under NAICS code 541380, issued by the Department of Defense through DEPOT OKLAHOMA, with performance centered at TINKER AFB, ZIP 73145-8000. Solicitation opened on August 5, 2026, with a response deadline of August 17, 2026. While no set-aside type is specified, the contract is accessible to eligible subcontractors who can deliver compliant quality documentation and, when required, facilitate third-party inspection services. All submissions must adhere to the technical and procedural expectations outlined in the solicitation to ensure alignment with defense logistics standards.

Testing Laboratories and Services

POSTED

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires strict adherence to hazard communication standards for aluminum alloy materials that pose a combustible dust risk during processing, specifically mandating compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200 under the Globally Harmonized System of Classification and Labeling of Chemicals. All applicable hazard warning labels must be accurately applied to ensure proper identification of dust-related combustion hazards throughout the handling, storage, and processing lifecycle. This obligation extends to all subcontractors and personnel involved in the handling of these materials, with full documentation and verification of label accuracy and placement required. The solicitation is a subcontract under the Department of Defense, managed by DEPOT OKLAHOMA at TINKER AFB with a zip code of 73145-8000, and falls under the NAICS code 541690 for other scientific and technical consulting services. The posting date is August 5, 2026, and responses are due by August 17, 2026. The contract does not specify a set-aside designation, and all submissions must be made through the designated DIBBS portal link. Compliance is non-negotiable and failure to meet labeling requirements may result in rejection of deliverables or contractual penalties.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Aluminum Structural Angle Supply (6061-T6 Alloy)The contract calls for the supply of approximately 901 feet of aluminum structural angle measuring 3.00 inches by 3.00 inches with a 0.250 inch wall thickness, with allowable length variations between 20 and 30 feet and a tolerance of ±10% on total quantity. All material must be manufactured from 6061-T6 aluminum alloy and comply with the technical specifications outlined in SAE AMS-QQ-A-200C and ASTM B666/B666M-20 to ensure structural integrity and consistent performance. The materials are intended for use in defense-related applications, as indicated by the procurement under the Department of Defense through the Depot Oklahoma office, with performance required at Tinker Air Force Base, Oklahoma, ZIP 73145-8000. The solicitation is classified as a subcontract and was posted on August 5, 2026, with responses due by August 17, 2026. The North American Industry Classification System code 331311 identifies the industry as Aluminum Die and Foundry Products Manufacturing, reinforcing the focus on precision metal fabrication. There is no set-aside designation specified, and the contract is open to eligible suppliers who can meet the stringent material standards and delivery timelines. The full solicitation details and submission process are accessible through the DIBBS platform using the reference number SPE8E426T1975.

Alumina Refining

POSTED

DEADLINE

Aluminum Alloy Alclad Sheet ManufacturingThe contract involves the manufacture and supply of aluminum alloy Alclad sheets adhering strictly to military specifications, with exact requirements for dimensions, cladding thickness, and temper designation to ensure performance and durability under demanding operational conditions. The materials must meet rigorous quality standards to support defense applications, and the production process must verify compliance with established technical criteria throughout all phases of fabrication. The contract is a subcontract issued under the NAICS code 331491, with performance obligated at Tinker Air Force Base, Oklahoma, and a response deadline of August 17, 2026. The contracting entity is the Department of Defense through the Depot Oklahoma office, and the solicitation is managed through the DIBBS system under reference SPE8E426T1945. All proposals must be submitted prior to the deadline to be considered, and suppliers are expected to demonstrate proven capability in producing military-grade Alclad sheets to support critical defense infrastructure.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

DEADLINE

Specialized Packaging, Preservation, and MarkingThe contract requires specialized packaging, preservation, and marking of metal sheets in full compliance with ASTM A700, MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring the materials are protected against environmental degradation and maintained in mission-ready condition. This includes secure palletization methods and the application of NSN labeling to meet military logistics and inventory tracking protocols. All work must be performed to guarantee the integrity of the metal sheets during storage and transit, with strict adherence to defense-specific documentation and handling procedures. The solicitation is issued under a subcontract type by the Department of Defense through the Depot Oklahoma office, with performance required at Tinker AFB, Oklahoma, ZIP 73145-8000. The North American Industry Classification System code is 423840, indicating a focus on wholesale trade in metals and minerals. The response deadline is August 17, 2026, and the opportunity was posted on August 5, 2026, providing potential bidders approximately twelve days to prepare and submit their proposals. There is no set-aside designation specified, and the contract is open to eligible subcontractors capable of meeting the rigorous defense packaging and labeling requirements.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Certification and Documentation Services for Metal SupplyThe contract requires the preparation and submission of quality compliance certificates, mill test reports, and CDRL documentation including DD Form 1423s, all aligned with military aerospace standards to support metal supply requirements. This subcontract is tied to the Department of Defense through the Depot Oklahoma office, with performance expected at Tinker Air Force Base, Oklahoma, 73145-8000. The work demands strict adherence to technical and regulatory frameworks governing aerospace-grade materials documentation, ensuring traceability, material integrity, and compliance with federal defense specifications. Proposals must be submitted by August 17, 2026, following the solicitation issued on August 5, 2026, under NAICS code 541330 which classifies it as engineering services. All deliverables must meet rigorous certification criteria to validate material authenticity and conformity for use in defense systems.

Engineering Services

POSTED

DEADLINE