This Solicitation opportunity from Government of Canada was posted on January 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

County of Newell - Invitation to Bid - 4WD Tractor w/Cab

Closed

AB-2026-00160International

Submission Closed01/30/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333111

New

DIBBS

SPRAYER, PESTICIDE, S

Solicitation # SPE4A0-26-T-4757

This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4757, is for the procurement of one skid-mounted pesticide sprayer. The required equipment is identified as part number DYNAJET L-30, manufactured by Curtis Dyna-Fog Ltd under CAGE code 82254, with NSN 3740-01-495-0914. The contractor is required to provide one unit along with a comprehensive manufacturer's commercial manual covering operation, services, maintenance, and repair. The contract falls under NAICS code 333111 and specifies a delivery timeline of five days after receipt of order, with the place of performance located at Camp Pendleton, California. Key compliance requirements include adherence to DLA packaging standards and the removal of government identification from any non-accepted supplies. Item Unique Identification is not required per the service customer's request. The solicitation was posted on September 9, 2026, with a response deadline of September 17, 2026, and is subject to the DLA Master List of Technical and Quality Requirements.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Secondary Tillage Disk

Solicitation # 12444326Q0078

Solicitation number 12444326Q0078 is a combined synopsis and request for quotation issued by the Department of Agriculture, specifically the USDA-FS CSA East office in Atlanta, Georgia. The contract is for the procurement of a secondary tillage disk that must adhere to specific technical requirements, including dimensions, blade counts, gang angles, conditioner reels, and safety features. This acquisition is a total small business set-aside under NAICS code 333111 for Farm Machinery and Equipment Manufacturing, with a size standard of 1,250 employees. The place of performance for this contract is located in Booneville, Arkansas. Interested offerors must be registered in the System for Award Management at the time of offer and award. Submissions must include a technical plan and a price quote, with the response deadline set for September 21, 2026, at 17:00. The primary point of contact for this solicitation is Carrie L Edwards.

POSTED

DEADLINE

Commercial Mowers for Bay Pines VA Health Care System

Solicitation # 36C24826Q1118

The Department of Veterans Affairs is soliciting bids for commercial front mowers for the Bay Pines VA Healthcare System located in Bay Pines, Florida. This procurement is designated as a 100 percent total small business set-aside under NAICS code 333111 for farm machinery and equipment manufacturing. To be eligible for consideration, all vendors must be properly registered in the System Award Management database. The solicitation, identified by number 36C24826Q1118, was posted on September 9, 2026, with a response deadline of September 16, 2026, at 2:00 PM. Interested small business sources should direct inquiries to the primary point of contact, Cindy B Smith, and ensure all submissions comply with the commercial product guidelines specified in the announcement.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Ag-Bag T700 Pull-Type Forage Bagger

Solicitation # 1284LM26Q0138

The Department of Agriculture, specifically the Csa Intermountain 2 Usda-Fs, is soliciting quotes for the purchase of an Ag-Bag T7060 Pull-Type Forage Bagger under solicitation number 1284LM26Q0138. This procurement is designated as a 100 percent small business set-aside, and small business resellers are permitted to submit quotes. The place of performance for this equipment is located in Mississippi. All interested parties must submit their quotes to Sarah Cotton via email at sarah.cotton@usda.gov. The deadline for submission is September 18th by 5:00 pm EST. This opportunity falls under NAICS code 333111 and is managed by the office located in Ogden, Utah.

Csa Intermountain 2 Usda-Fs

POSTED

DEADLINE

New 12 to 15 foot No-Till Grain Drill

Solicitation # 12RADZ26Q0006

Solicitation 12RADZ26Q0006, issued by the USDA, is a request for quotations for one new no-till grain drill with a working width of 12 to 15 feet and a small seed box. The contract requires the delivery of the equipment to Florence, South Carolina, including on-site initial setup, configuration, and a minimum two-year warranty with on-site support services. Additionally, the provider must offer a trade-in credit for an existing John Deere 750 no-till drill. This is an unrestricted acquisition under NAICS code 333111 and is not set aside for small business concerns, meaning all responsible sources may submit a bid. The deadline for responses is September 17, 2026.

POSTED

DEADLINE

01913-270003 Agricultural Rotary Cutter

Solicitation # WS5788843821

The Government of Canada, through the Department of Public Works and Government Services, is soliciting offers for the procurement and delivery of one agricultural rotary cutter for the Agriculture and Agri-Food Canada research farm located in Harrington, Prince Edward Island. This opportunity is open exclusively to Canadian suppliers, and the requirement is conditionally limited to the provision of Canadian goods. Interested parties must submit their responses by September 16, 2026. All deliverables associated with this contract must be received no later than March 31, 2027. The primary point of contact for this solicitation is Maryse Cyr, acting as the Contracting Authority.

Department of Public Works and Government Services

POSTED

DEADLINE

Supply of Automotive Driving Axle Assembly (NSN 7540-01-1528070)

POSTED

DEADLINE

3-Row Sugarcane Cultivator

Solicitation # 123A9426Q0043

Solicitation 123A9426Q0043 is a combined synopsis and request for quotation issued by the USDA Agricultural Research Service for the procurement of one new 3-row sugarcane cultivator to be used at the Ardoyne Research Farm in Houma, Louisiana. This acquisition is a total set-aside for small business concerns under NAICS code 333111. The equipment must be a new commercial item sourced from an Original Equipment Manufacturer or an approved source, featuring specific technical requirements including a spring-loaded center row, Grade 8 hardware, six sets of dirt shields and clamps, three middle busting plows, and a configuration for 72-inch row spacing or the customer's choice. The contract will be awarded based on the best value to the government, with technical acceptability evaluated on a pass/fail basis. Offerors must provide supporting documentation, such as datasheets or manufacturer quotes, to verify the product meets all specifications. While the original delivery timeframe was 60 days, Amendment 0001 extended the delivery period to 90 days after award. Shipping is requested as FOB Destination. Quotations are due by September 18, 2026, and will be evaluated for fairness and reasonableness in accordance with FAR Part 12.

POSTED

DEADLINE

Supply of 500 Gallon Engine Driven Trailer Mounted Sprayer System

MODOT SOUTHWEST DISTRICT

POSTED

DEADLINE

500 Gallon Engine Driven Trailer Mounted Sprayer System

Solicitation # MODOT SW 0000000050SL

The Missouri Department of Transportation Southwest District is seeking bids for a 500 gallon, engine driven, trailer mounted sprayer system. This solicitation will be awarded based on firm fixed pricing to the lowest bidder who meets or exceeds the required specifications. An initial order of one unit is designated for Preston Maintenance, with further procurement occurring on an as needed basis. The contract term begins on the date of award and extends through September 30, 2027, with the possibility of two additional one-year renewal options. Interested parties must submit their responses by the deadline of September 22, 2026.

MODOT SOUTHWEST DISTRICT

POSTED

DEADLINE

Supply of New Sweco Dozer

Csa Southwest 1 Usda-Fs

POSTED

DEADLINE

Swather delivered to Sidney, Montana

Solicitation # 1232SA26Q1307

Solicitation 1232SA26Q1307 is a combined synopsis and request for quotation issued by the USDA Agricultural Research Services for the procurement of one swather to be delivered to the Northern Plains Agricultural Research Laboratory in Sidney, Montana, or the Froid research farm. This acquisition is a total small business set-aside under NAICS code 333111. The government is seeking a self-propelled swather or front tractor-mounted mower that meets or exceeds the salient characteristics of a GreenStar 7500 Swather, including specific requirements for a sealed cab for operator safety, rollover protection with ROPS and a seat belt, 2.5 cm pass-to-pass horizontal accuracy, and multi-constellation satellite support. The contract will be awarded as a firm-fixed price purchase order based on the lowest price technically acceptable criteria. To be considered acceptable, offerors must provide descriptive literature demonstrating compliance with technical specifications and a neutral or acceptable past performance rating. The successful contractor must deliver the equipment within 90 days of the order and provide training on software and operations at the time of delivery or within two weeks following. All quotes must be submitted by September 17, 2026, and pricing must remain firm for 90 calendar days. Delivery is specified as FOB Destination, and the contractor is responsible for all associated travel and delivery fees.

USDA Ars Afm Apd

POSTED

6 days ago

DEADLINE

in 8 days

AI Contract Overview

The County of Newell is inviting bids for the supply of a 4WD tractor with a cab, intended for delivery in 2026. This procurement opportunity, issued under solicitation number AB-2026-00160, is managed by the Government of Canada and pertains to the Alberta region. Interested vendors must submit their tenders by January 30, 2026, with the invitation initially posted on January 9, 2026. The contract requires a robust 4WD tractor equipped with a cab, suitable for the County's operational needs. The primary point of contact for this solicitation is Joe Entz, the Contracting Authority, who can be reached via the provided email. Further details and submission guidelines are accessible through the official Canada Buys platform. This procurement presents an opportunity for suppliers specialized in agricultural or heavy machinery to fulfill the County's equipment requirements.

General Info

County of Newell seeks bids for 4WD cab tractor, delivery 2026, tender due January 30, 2026.

Agency

Government of Canada → County of NewellView Agency

NAICS

333111 - Farm Machinery and Equipment ManufacturingView NAICS

Place of Performance

Alberta, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJan 9

Solicitation

Response DeadlineJan 30

Deadline has passed

Submission Closed

01/30/2026, 01:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → County of Newell

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → County of Newell

View Agency Profile

Office AddressN/A

Contacts

Joe EntzContracting Authority

contact@example.gov

Full Description

The County of Newell is seeking tenders for 2026 4WD Tractor W/Cab

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS