COUPLING HALF, QUICK DI
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Solicitation SPE7M3-26-T-9482, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for 11 units of steel quick-disconnect coupling halves with a nominal 5/16 inch inner diameter. The items must adhere to the specifications in the coupling halve quick-disconnect CID, with a specific requirement that the spring material be stainless steel per ASTM A313. The procurement is subject to full and open competition, with a required delivery date of September 23, 2026, and a delivery window of 20 days after order. The contract specifies FOB Origin shipping with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while DLA Master List technical and quality requirements take precedence. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
General Info
Place of Performance
NAS NORTH ISLAND, SAN DIEGO, CA, 92135-7130, USASet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
COUPLING HALF, QUICK DISCONNECT. STEEL MATERIAL<(>,<)>
5/16 IN. I.D. NOMINAL SIZE TO MALE, PER CID TITLED
"COUPLING HALVE, QUICK-DISCONNECT".
EXCEPTION TO SPEC; SPRING MATERIAL SHALL BE
STAINLESS STEEL I/A/W ASTM A313.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLIES.
TDP Rev A Gen 1 IAW BASIC CID A-A-59439B REVISION NR B DTD 02/02/2017 PART PIECE NUMBER: AA59439-011-10-00-C
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M3-26-T-9482
SECTION B
PR: 7018502728 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018502728 0001 EA 11.000
NSN/MATERIAL:4730002898194
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N47792
COMNAVAIRPAC SD
P O BOX 130
NAS NORTH ISLAND
SAN DIEGO CA 92135-7130
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N47792
CNAP WAREHOUSE
DOOR # 2
4512 70TH AVE. EAST
FIFE WA 98424
US
M/F: (TCN) R491326261B187
RDD:
PROJ: EP5 TP 2
SUPP ADD: N47792 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A41 DIST: 9B ADV: 2L FC: L2
Need Ship Date:00/00/0000 Original Required Delivery Date:09/23/2026
SPE7M3-26-T-9482
SECTION B
PR: 7018502728 PRLI: 0001 CONT’D
SPE7M3-26-T-9482 NSN/Part Number: 4730-00-289-8194 Quantity: 11 EA Purchase Request: 7018502728QTY: 11 Delivery: 20 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → FLUID HANDLING DIVISION
Same awarding agency
Ready to Pursue This Opportunity?
Get AI-powered intelligence on this solicitation and the ones like it
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS
