Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

COUPLING HALF, QUICK

Active
SPE7M3-26-T-8157Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for 280 units of a 3/8 inch quick disconnect coupling half, specified by NSN 4730-01-412-5272 and referenced to a technical drawing titled "COUPLING HALF, QUICK DISCONNECT." All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Export control restrictions apply to technical data associated with this item under either ITAR or EAR, requiring prior authorization from the Department of State or Commerce for any disclosure to foreign persons, including those within the United States. Access to this controlled data is restricted to DLA contractors with active US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and approval from the DLA controlling authority. The solicitation, issued under number SPE7M3-26-T-8157 on August 10, 2026, with a response deadline of August 21, 2026, is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332996. Performance is required at New Cumberland, Pennsylvania, 17070-5002, with a delivery window of 105 days after award. The primary point of contact is William Cain from the Fluid Handling Division, Department of Defense, reachable via email and phone. The procurement is managed through the DLA’s electronic procurement portal, and all contractors must comply with DFARS 252.225-7048 regarding export control of technical data.

General Info

280 quick disconnect couplings, ITAR/EAR controlled, SDVOSB set-aside, delivery to New Cumberland in 105 days.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SDVOSBC

Documents

(1)

RFQ SPE7M3-26-T-8157 for Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COUPLING HALF,QUICK
COUPLING HALF, QUICK DISCONNECT. 3/8 SIZE. PER DRAWING TITLED "COUPLING
HALF, QUICK DISCONNECT.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4730-01-412-5272 Quantity: 280 EA Purchase Request: 7016089467QTY: 280 Delivery: 105 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
SWIVEL JOINT, HYDRAULIC
Solicitation # SPE7M3-26-T-8155
A hydraulic swivel joint made of steel with a zinc plating and dichromate finish, or alternatively a clear trivalent chromate finish, is being procured under a total small business set-aside solicitation. The part features 3/4-16 37-degree SAE flare connections on both ends and measures 3.06 inches overall in length, with a specific part number assigned by Grove U.S. LLC and Oshkosh Defense LLC as approved sources. This is a critical application item requiring government engineering source approval and is subject to stringent technical and quality requirements referenced from the DLA Master List. The item is identified by NSN 4730-01-199-4583 and must be delivered in full compliance with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The contract calls for 303 units to be delivered FOB origin within 163 days, with zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the shipment must be sent to the designated DLA Distribution facility in New Cumberland, Pennsylvania. The delivery is scheduled for February 1, 2027, with an original required delivery date of February 2, 2027, under solicitation SPE7M3-26-T-8155, and the unit price is $303.00 per each, totaling a contract value of $91,809.00.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, QUICK DISCONNE
Solicitation # SPE7M3-26-T-8158
This contract pertains to a commercial quick disconnect plug identified by part number 155-39-12D, manufactured by SATAIR A/S and also available from Eaton Aeroquip LLC and Jaidinger Mfg Co Inc, designed for use on F/A-18 Hornet and S-3A Viking aircraft. The item is constructed from aluminum alloy with an external thread and includes a chain, and it is classified as a critical application item with destination inspection and acceptance points. Packaging must comply with MIL-STD-2073-1E, including heat-sealed barrier bags for cleanliness, and marking must adhere to MIL-STD-129 with special marking code 24 indicating open inspection or use. Packaging is subject to DLA’s Reduced Plastic Packaging Initiative, requiring minimal plastic use without compromising protection. The item is procured under solicitation SPE7M3-26-T-8158, a Women-Owned Small Business Set-Aside, with a required delivery of 312 units within 125 days of award, delivered FOB origin. The NSN is 4730-01-394-3297, and the unit of issue is each. Delivery must be made to DLA Distribution Jacksonville at the specified address, with freight details governed by DLA procedures C19 and C20. The original required delivery date is January 4, 2027, with a need ship date of December 25, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and pricing is set at $312.00 per unit for a total contract value of $97,344.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER BUSHING
Solicitation # SPE7M0-26-T-036P
The contract mandates the supply of nine Adapter Bushings, identified by NSN 4730-01-340-9517 and part number B2SS, under solicitation SPE7M0-26-T-036P, with delivery required within five days of award at FOB origin. All items must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including ASTM D3951 packaging standards, and must be marked and labeled per MIL-STD-129. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials require prior approval unless already authorized by specification. Packaging must adhere to DLA’s RP001 packaging requirements and be palletized accordingly, with a unit of issue of EA and quantity per unit pack specified as 001. Shipments must be sent by the fastest traceable means, excluding parcel post, and delivered to W81AAX at 81 Barnum Road, Devens MA 01434-3505. Inspection and acceptance occur at destination, with zero variance permitted in quantity. The required delivery date is August 6, 2026, and contract compliance is enforced through detailed government tracking identifiers including IPD, DIC, and TCN codes.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-26-T-8154
The contract is for 147 hundred-unit lots of a spring-type hose clamp, nominal effective size of 1-3/8 inches, identified by NSN 4730-00-585-8582 and part number AA52506-E-22, with full and open competition required. The item must comply with the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and all manufacturing and inspection must follow MIL-STD-1916 or an equivalent zero-based sampling plan with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0. The product must not contain or come into direct contact with mercury or mercury-containing compounds except for specific exemptions such as functional uses in batteries, fluorescent lights, sensors, or instrumentations approved by NAVSEA, and any portable fluorescent lamps or instruments containing mercury must be shock-proof with a secondary containment boundary per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and replacements require prior approval unless explicitly authorized. The clamp must conform to SAE J1508-2009 and the DLA-approved specification revision E dated 03/31/2023, with configuration changes requiring formal engineering change proposals or variance requests. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with the U pack code and no special marking, and palletization must meet DLA procurement requirements. The unit of issue is an HD of 100 units, with delivery due 101 days after award, FOB origin, inspection and acceptance at destination. The full shipment must be delivered to the DDSP New Cumberland Facility in Pennsylvania with a required ship date of December 1, 2026, and an original delivery deadline of December 12, 2026.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
NUT ASSEMBLY, TUBE C
Solicitation # SPE7M3-26-T-8156
The contract is for the procurement of 210 units of NUT ASSEMBLY, TUBE C, identified by NSN 4730-00-102-2672 and purchase request number 7016692371, under solicitation SPE7M3-26-T-8156. The item is classified as a critical application item with strict compliance requirements governed by the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and the DLA Packaging Requirements for Procurement, including palletization as specified in RP001. The unit of issue is each, with no variance permitted in quantity. Delivery is required FOB origin, with inspection and acceptance occurring at the destination, and delivery must be completed within 73 days of contract award. The required delivery date is November 8, 2026, with a need ship date of November 3, 2026. The item may be sourced from approved suppliers including HYDRAFLOW, LKR INC, and TRANSDIGM INC, each with their respective part numbers. All packaging must be marked and prepared for shipment to the specified DLA Distribution facility at Robins AFB, Georgia, and transportation logistics must comply with DLAD Proc Notes C19 and C20. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 332996, with contract management and inquiries directed to William Cain at the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SEDIM
Solicitation # SPE7M0-26-T-035W
The contract pertains to the procurement of one sediment strainer element with NSN 4730-01-123-1534 and part number 08008-1, issued under solicitation SPE7M0-26-T-035W. Delivery is required within five days FOB origin with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific material and marking requirements, and bags must be fabricated to MIL-B-117 standards. The item is designated as a critical application item, subject to stringent technical and quality controls referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited unless functionally essential and explicitly authorized, with additional containment requirements for portable devices. Class I ozone-depleting chemicals are banned, and any substitute chemicals require prior approval. The supplier must provide a Certificate of Conformance unless waived by a Quality Assurance Letter of Instruction. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated government facility in Suffolk, Virginia, with a delivery deadline of August 7, 2026. The contract enforces full and open competition with no set-aside restrictions. All packaging, palletization, and marking follow DLA and military standards, including the use of specific preservation methods and container types. The contract documentation incorporates technical specifications by reference and mandates compliance with DoD unit of issue standards. Government use fields indicate tracking and logistics codes for internal handling, and the solicitation was posted for response until August 21, 2026, under the authority of the Department of Defense's Maritime Supply Chain ESOB.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE4A5-26-T-338B
The contract is for a single unit of a metal tube assembly, part number 68A691949-1001, with NSN 4710014480994, supplied to the U.S. Department of Defense under solicitation SPE4A5-26-T-338B. Delivery is required within five days to Robins Air Force Base, Georgia, with FOB origin terms and no quantity variance allowed. Inspection and acceptance occur at the destination. The item is designated as a critical application, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA-specific packaging guidelines, and the use of parcel post is strictly prohibited. All shipments must be sent via the fastest traceable means. The manufacturer must meet non-tailored ISO 9001:2015 quality requirements and follow configuration change management and variance request protocols. Sampling adheres to MIL-STD-1916 or approved zero-based plans, with acceptance criteria requiring zero non-conformances unless otherwise specified. Unit identification is not required per the service customer's request. The contract includes specific documentation, packaging, labeling, and shipping instructions, with the point of contact being Annette Pruett. The original delivery date is August 3, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
RETAINER, COUPLING
Solicitation # SPE4A5-26-T-338G
The contract pertains to the procurement of a Retainer, Coupling, identified by part number 555-3115-501 and NSN 4730-01-559-0320, with a total quantity of 216 units to be delivered FOB origin within 405 days. The item is classified as a Commercial Off the Shelf (COTS) product, and while Item Unique Identification is not required, the supplier must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet DLA’s RP001 packaging requirements. The delivery destination is DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with inspection and acceptance occurring at the destination. The supplier must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and comply with requirements for Covered Defense Information under RD002. The purchase request number is 7014383879, the unit price is $216.00 totaling $46,656, and the original required delivery date is October 26, 2027, with a needed ship date of May 3, 2026. The solicitation number is SPE4A5-26-T-338G, issued by the Department of Defense, with Cynthia Duval as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
REDUCER, TUBE
Solicitation # SPE7L5-26-T-4923
A nylon tube reducer sized at 3/8 inch by 1/4 inch is being procured under contract SPE7L5-26-T-4923 for use on airframe 26512 E/I aircraft applications, with the part number NY600-6-4 from Swagelok and GR550B6-4 from Northrop Grumman Systems Corporation. The item is identified by NSN 4730-01-041-7984 and requires strict adherence to DLA packaging and technical quality requirements, with the DLA Master List of Technical and Quality Requirements taking precedence over ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow RP001 specifications. The contract mandates a fixed quantity of 51 units with no variance allowed, to be delivered FOB origin within 12 days of contract award, with inspection and acceptance occurring at destination. The unit of issue is each, priced at $51.00 per unit, totaling $2601.00. Delivery must be completed by June 18, 2026, and shipments are to be sent to the DLA Distribution Facility at New Cumberland, Pennsylvania, using the provided parcel post and freight shipping addresses. All technical and quality criteria referenced via R or I numbers are governed by the DLA Master List version in effect on the solicitation issue date, and compliance with DoD unit of issue standards is required.
LAND SUPPLIER OPNS ENGINES

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
NUT, TUBE COUPLING
Solicitation # SPE7M4-26-T-328V
The contract specifies the procurement of a tube coupling made from 304 stainless steel, identified by NSN 4730009194651 and governed by specification SPE7M4-26-T-328V. It is classified as a commercial item and requires compliance with multiple technical and quality standards referenced through DLA’s Master List, including stringent material and manufacturing controls. The component must be sourced from manufacturers listed on the Performance Review Institute’s Qualified Manufacturers List or Qualified Products List, with all assemblies subjected to accreditation requirements. Thread classification is Class 3, and the item must strictly avoid intentional incorporation of mercury or mercury compounds, except in narrowly defined exceptions such as batteries, lamps, and specified instruments, which must include secondary containment per NAVSEA guidelines. Ozone-depleting chemicals are completely prohibited. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans with zero non-conformances required unless otherwise specified, and all items must conform to MIL-STD-129 marking and MIL-STD-2073-1E packaging standards. Palletization and packaging adhere to DLA’s RP001 requirements, with no variance permitted in delivered quantities. Delivery is mandated in three separate lots totaling 578 units, with FOB origin terms and inspection and acceptance occurring at the destination. The items are to be delivered to three DLA distribution centers in Jacksonville, FL; San Diego, CA; and Tinker AFB, OK, with shipment deadlines ranging from September 2026 to October 2027, though the overall required delivery date is February 27, 2027. Each shipment must include intermediate containers holding 100 units, marked in accordance with specified codes and packaged using approved materials and methods. The contract enforces documentation compliance for source approval, mandates adherence to SAE AS18280H and AS21921D technical data package revisions, and requires all substitutes to be pre-approved unless explicitly authorized. The unit of issue is each, priced at $3.00 per unit, with total contract value reflecting the aggregated quantities across all delivery points.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-8163
The contract is for 286 straight pipe-to-hose adapters made of aluminum with an anodized finish, identified by NSN 4730-01-198-0571 and part of purchase request 7016484916. The item must comply with specific material standards, substituting ASTM B211 for QQ-A-225/7 and QQ-A-225/8, and ASTM B221 in place of QQ-A-200/8. The solicitation, numbered SPE7M3-26-T-8163, is a total small business set-aside under NAICS code 332996 and was posted on August 10, 2026, with responses due by August 21, 2026. Delivery is required within 59 days after delivery order issuance to Texarkana, Texas, with a primary point of contact at the Defense Logistics Agency’s Fluid Handling Division. The technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on acquisition size. Technical data associated with this item is subject to export control under ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and DLA authorization may access the controlled data.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, TUBE FITTING
Solicitation # SPE7M4-26-T-328K
This contract is for the procurement of locknuts for tube fittings, specifically steel components with a cadmium finish and a 0.375 inch outer diameter tube size, identified by NSN 4730002775084 and part number AS5179-06. The item is classified as a commercial item and a critical application component, requiring strict compliance with SAE AS5179D and AS4841 standards. Manufacturing and assembly must be performed exclusively by accredited entities listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, accessible through EAUDITNET.COM. Thread specifications follow Class 3 standards, and the use of Class I ozone-depleting chemicals is strictly prohibited, with any substitutes needing prior approval. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking requirements, with palletization and handling governed by DLA’s RP001 procurement standards. The contract includes two line items for a total quantity of 106 units, with unit prices of $44 and $62 respectively, and delivery scheduled within 283 days from contract award to destinations at Robins Air Force Base, Georgia and Hill Air Force Base, Utah. Inspection and acceptance occur at the destination, with no quantity variance permitted. Delivery must occur no later than June 21, 2027, with required ship dates between May and June 2027. All transportation and logistics follow DLA procedural guidelines, and the item is procured under a federally issued solicitation with a response deadline of August 21, 2026.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332919
New
DIBBS
SEAL, CONICAL, FLARED TU
Solicitation # SPE7M3-26-T-8152
This contract specifies the procurement of conical flared tube seals, identified by part number AS4824A16 and NSN 4730-01-538-3942, manufactured in accordance with SAE AS4824B (R2015) Revision B dated 11/01/2007. Each package contains two seals and is designated as one package (1 PG = 2 EA), with a total quantity of 453 packages required. The item is classified as a critical application and must not contain any ozone-depleting chemicals; substitutes require prior approval unless explicitly authorized by the specification. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific instructions to keep seals enclosed in protective plastic vials during shipping to prevent damage. Marking must follow standard government protocols, with no additional special coding required. The contract mandates delivery within 88 days from the requirement date, with FOB origin terms, inspection and acceptance occurring at origin, and no variance allowed in quantity. The delivery address is DLA Distribution in Corpus Christi, Texas, with a need ship date of August 6, 2026, and an original required delivery date of March 12, 2027. The contract is subject to full and open competition, and the Certificate of Conformance procedure is authorized unless overridden by a quality assurance instruction. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision levels determined by the solicitation or award date. Transportation and shipping logistics must adhere to DLA Procurement Notes C19 and C20, and all unit of issue data aligns with DoD and ANSI X12 standards.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
ORIFICE PLATE ASSEMBLY
Solicitation # SPE7M4-26-T-328Q
The contract specifies the procurement of an orifice plate assembly with part number 5712-2PC and NSN 4820-00-911-1545, for a quantity of 157 units, under solicitation SPE7M4-26-T-328Q. Delivery is required within 164 days, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging materials, and the U pack code. The item is classified as a critical application item with a non-extendable shelf life of 120 months and is subject to DLA’s packaging and quality requirements as defined in their master list of technical and quality standards. Mercury and mercury-containing compounds are strictly prohibited unless part of approved functional components like batteries or sensors, and portable devices containing mercury must have a secondary containment as per NAVSEA 5100-003D. A Certificate of Quality Compliance is mandatory, and removal of government identification from non-accepted supplies is required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is February 2, 2027, with an original delivery due date of December 17, 2026. Unit of issue is each, priced at $157.00 per unit, totaling $24,649.00.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M4-26-T-328T
The contract is for the procurement of a fluid filter element with the NSN 2940-00-741-1081 and part numbers specific to approved vendors including Wheeler Fleet Solutions, Met-Pro Corporation, and Haldex Brake Products Corporation. A total quantity of 234 units is required, each unit priced at $234.00, resulting in a total contract value of $54,756. Delivery is mandated within 24 days from the order placement, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The filter element is designated as a critical application item, and strict compliance is required with DLA packaging standards, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking codes applicable. Packaging must adhere to DLA’s RP001 requirements and be palletized accordingly. Mercury or mercury-containing compounds are prohibited in or in direct contact with the filter element except under specific exceptions for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or Navsea-specified reagents, with portable devices containing mercury required to be shockproof and have a secondary containment boundary consistent with NAVSEA 5100-003D. All supplies must be delivered to the DLA Distribution Depot Hill in Hill AFB, Utah, and transportation logistics are governed by DLAD procedural notes C19 and C20. The solicitation number is SPE7M4-26-T-328T, issued under NAICS code 336390 by the Department of Defense’s Fluid Handling Division, with a response deadline of August 21, 2026, and a required ship date of September 15, 2026, despite an original delivery date of February 3, 2027. The contract enforces full alignment with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the applicable revision is controlled by the solicitation issue date.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
COUPLING, SHAFT, RIGI
Solicitation # SPE7M4-26-T-329C
The contract pertains to the procurement of a rigid shaft coupling, part number 317090, manufactured by Eaton Aerospace LLC with CAGE code 62983, under solicitation SPE7M4-26-T-329C. A total of 30 units are required at a unit price of $30.00, with delivery scheduled for 164 days after award, FOB origin, and acceptance occurring at the destination. The item is classified as a critical application item and must comply with stringent defense procurement standards, including the DLA Master List of Technical and Quality Requirements, which supersede all other specifications. Compliance with MIL-STD-129 for marking and packaging is mandatory, and packaging must align with ASTM D3951 unless overridden by DLA requirements. Palletization must follow RP001 guidelines, and sampling protocols require zero non-conformances under MIL-STD-1916 or equivalent zero-based plans, with verification levels assigned based on attribute criticality. The supplier must hold a CMMC Level 2 self-assessment certification and handle Covered Defense Information as defined by RD002. Delivery is to be made to DLA Distribution Depot Hill at Hill AFB, Utah, with a required ship date of February 2, 2027, and an original delivery deadline of September 12, 2027. No quantity variance is permitted, and all packaging and labeling must strictly adhere to contract-specified unit of issue and quantity per unit pack.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-328Y
The contract specifies the procurement of seamless metallic tubing made from corrosion-resistant steel with a composition of 321, featuring an outer diameter of 0.500 inches and a wall thickness of 0.028 inches, delivered in random lengths between 8 and 16 feet. The tubing must comply with the MIL-T-8606C(2) specification and meet the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including the applicable QAP 13873. The item is classified as a commercial item and a critical application item, requiring full and open competition. All materials must adhere to strict manufacturing and inspection standards, including compliance with MIL-STD-1916 or ASQ Z1.331 for sampling, with zero non-conformances required unless otherwise specified, and must be verified through a Certificate of Quality Compliance as mandated by contract clause 52.246-9000. Metal certification documentation is required and must be submitted as per CDRL-METALSCERT. Packaging and delivery must follow MIL-STD-2073-1E and RP001 DLA Packaging Requirements, with preservation performed in accordance with MIL-S-163 using Type B or C preservatives as applicable. Each master lift is limited to 2000 pounds gross weight, and packaging must not include Class I ozone-depleting chemicals. Marking is required per MIL-STD-129 with no special marking codes. The delivery point is FOB origin with inspection and acceptance also occurring at origin, and the quantity of 1,207 linear feet may vary by plus or minus 10%. The required delivery date is January 12, 2027, with a need ship date of February 2, 2027, and full delivery must be completed within 164 days. The item is identified by NSN 4710-00-540-6722 and purchase request 7017779049, with final delivery directed to DLA Distribution at Robins Air Force Base, Georgia. All documentation and compliance are subject to the latest revisions of referenced standards effective on the solicitation or award date, as applicable.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7M4-26-T-328R
The contract is for the procurement of 2,405 units of a grooved pulley identified by NSN 3020002771123 and part number MS20220-2, designated as a critical application item and classified as a commercial item. The product must comply with stringent technical and quality requirements outlined in MIL-DTL-7034/2B and MIL-DTL-7034F(2), with adherence to TDP Revision B General 2 and reference drawing 200415485. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards unless explicitly overridden by the contract. Sampling and inspection are strictly controlled under MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned predefined verification levels or AQLs. The item is subject to qualification under the Qualified Products List or Qualified Manufacturers List and must be packaged and labeled in compliance with MIL-STD-129 and ASTM D3951, with palletization meeting DLA Packaging Requirements. Delivery is FOB origin with a 164-day lead time and must arrive by February 2, 2027, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the contract is awarded under a HUBZone Set-Aside with a primary point of contact at the Department of Defense’s Fluid Handling Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-328M
The contract specifies the procurement of a synthetic rubber gasket with an outside diameter of 5.063 inches, an inside diameter of 1.875 inches, and a thickness of 0.125 inches, classified as a critical item requiring source inspection and compliance with stringent technical and quality standards. The item is defined by a military or consensus non-government standard, and all units manufactured after the solicitation date must conform to the current revision of that standard, with past revisions accepted only for previously manufactured hardware. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain intentional mercury or mercury compounds except in specific exempted applications such as batteries or instrument sensors, with additional containment requirements for portable devices. It carries a non-extendable 36-month shelf life under Type I Code Q requirements, and each unit must be permanently marked every three feet with the specification number, revision, type, class, and cure or manufacture date in accordance with MIL-STD-190, including approved colors and environmental resistance. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 to protect against UV degradation. Palletization follows DLA packaging requirements, and all markings must include the special code 32 indicating Type I shelf life. The item is subject to inspection and acceptance at destination, with a delivery window of 87 days from the contract award and a required delivery date of December 31, 2026. The contractor must certify material compliance, understand bare item marking requirements, and deliver 215 units FOB origin under a firm fixed price of $215.00 each, totaling $46,225.00. The delivery address is the DLA Distribution New Cumberland Facility, and transportation logistics must adhere to DLAD Procurement Notes C19 and C20. The solicitation number is SPE7M4-26-T-328M, with a response deadline of August 21, 2026, and the item falls under Federal Supply Class 5330 with NSN 5330-01-126-8850.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-328S
This contract pertains to the procurement of a nonmetallic hose assembly identified by NSN 4720-01-482-7562, with a requirement for eight units to be delivered within 101 days to the designated receiving warehouse in Tracy, California. The product must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, specifically incorporating technical identifiers R and I, and adhere strictly to DLA packaging guidelines as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking and packaging. The hose assembly is governed by SAE AS117K and SAE AS1339K standards and is listed on a Qualified Products List or Qualified Manufacturers List, requiring sourcing only from qualified suppliers. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the referenced specifications. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans with zero non-conformances required unless otherwise stated, and attributes are evaluated using defined verification levels or AQLs. The item is designated as a critical application component, and delivery is FOB origin with no variance allowed in quantity. The contract mandates adherence to DLA freight and transportation procedures, with a firm delivery deadline of April 23, 2027, though an earlier ship date of December 1, 2026, is requested. No shelf life restrictions apply to this material.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
RETAINER ASSY
Solicitation # SPE7M4-26-T-329D
The retainer assembly, identified by NSN 5330-00-525-6138 and quantity of 126 units, is solicited under contract SPE7M4-26-T-329D with a response deadline of August 21, 2026, and a required delivery date 95 days after award. This item is classified as a commercial item and strictly prohibits the use of asbestos as defined in FED-STD-313. All technical and quality requirements applicable to this procurement are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The procurement is administered by the Department of Defense’s Fluid Handling Division, with performance located at Tinker AFB, Oklahoma, and primary point of contact Rory O’Reilly at dla.mil. The NAICS code 339991 applies, and the solicitation is issued through the DLA eProcurement portal.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details