Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COVER ASSY, RAM AIR

Active
SPE8EF-26-Q-0117Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 10 units of a cover assembly for a ram air inlet with NSN 1730-00-811-3041, issued under solicitation SPE8EF-26-Q-0117. Delivery is required within 315 days of award, and the solicitation was posted on July 15, 2026, with responses due by July 27, 2026. The item is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions for packaging, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. The supply involves technical data controlled under either ITAR or EAR, requiring strict compliance with U.S. export control regulations that restrict disclosure to foreign persons regardless of location. Only contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export control training and been formally authorized by DLA, may access or handle this controlled data. DFARS 252.225-7048 governs the protection and distribution of this information. The contract is classified as a federal procurement under the Department of Defense, with Russell Keiser designated as the primary point of contact for inquiries.

General Info

Procurement of 10 cover assemblies for ram air inlet, subject to ITAR/EAR, restricted access, DOD export controls, 315-day delivery.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

336419 - Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE8EF-26-Q-0117 for Cover Assembly, Ram Air Inlet

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Russell Keiser
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COVER ASSEMBLY, RAM AIR INLET
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1730-00-811-3041 Quantity: 10 EA Purchase Request: 7017286721QTY: 10 Delivery: 315 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336419
New
DIBBS
BOOT ASSY, AUXILIARYThe contract pertains to the procurement of 24 units of a BOOT ASSEMBLY, AUXILIARY with NSN 1650-01-132-0794, under solicitation SPE4A7-26-Q-0854, with a delivery deadline 202 days after award. This item is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—is prohibited without explicit authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on export-controlled technical data handling, and have passed the DLA Export-Controlled Technical Data Questionnaire, with final approval granted by the DLA controlling authority. The Defense Federal Acquisition Regulation Supplement clause DFARS 252.225-7048 governs the handling of this data, applying equally to U.S. companies, their foreign subsidiaries, and foreign national employees. The solicitation was posted on July 17, 2026, with responses due by July 29, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Brian Kurtz listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336419
New
Federal
Ground-Based Launcher Request for Information (RFI)The Air Force Life Cycle Management Center’s Command, Control, Communications, and Battle Management Directorate at Wright-Patterson Air Force Base in Ohio is conducting market research through a Request for Information to explore potential industry capabilities for a Ground-Based Launcher. This RFI, identified by solicitation number FA8612_RFI_C3BM_2026_0002, is strictly for gathering information and does not represent a solicitation for proposals, nor does it obligate the government to initiate a contract or issue a future Request for Proposal. Responses are due by August 7, 2026, and submissions must align with the North American Industry Classification System code 336419. The opportunity is not set aside for any specific business size or veteran-owned category, and the government is not accepting unsolicited proposals at this stage. All inquiries and submissions should be directed to the designated point of contact, Christopher Core, with Heather Bakker available as a secondary contact for clarification. The response must be submitted through the SAM.gov portal linked in the official posting, and interested parties are advised to review all provided documentation for detailed technical expectations and requirements.
FA8612 Aflcmc C3BM C3

POSTED

about 21 hours ago

DEADLINE

in 20 days
View Details
NAICS: 336419
New
DIBBS
CLOTH, FIBERGLASSThe contract pertains to the procurement of fiberglass cloth identified by NSN 5999-01-184-3935 and part number 1581, supplied by BGF Industries Inc, with a total quantity of 1,447 yards to be delivered FOB origin within 112 days of contract award. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego CA 92136-3581, with inspection and acceptance occurring at the destination point. The quantity is fixed with zero variance allowed, and packaging must comply with DLA Packaging Requirements for Procurement, MIL-STD-129 marking, and applicable federal standards, including ASTM D3951 for non-hazardous materials or TQ requirement IP025 if classified as hazardous under FED-STD-313. All technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence over any other standards. Palletization must adhere to RP001 guidelines, and the unit of issue is yard with corresponding commercial packaging per contract specifications. The solicitation number is SPE7M5-26-T-331N, issued on July 16, 2026, with a response deadline of July 27, 2026, and the original required delivery date is January 27, 2027, though the needed ship date is listed as November 17, 2026. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the point of contact is Corey Carter from the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336419
New
DIBBS
SEAL ASSEMBLYThe contract specifies the procurement of two units of a SEAL ASSEMBLY with NSN 1440-00-560-8390 under solicitation SPE4A6-26-T-04GQ, with a mandatory delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date depending on the acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs; unspecified attributes are treated as major. All work must comply with DLA packaging standards and the removal of government identification from non-accepted supplies. The item involves controlled technical data subject to ITAR or EAR, restricting export and disclosure to foreign persons without prior authorization, and access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA approval. DFARS 252.225-7048 governs handling of this data. The solicitation was posted July 15, 2026, with responses due by July 20, 2026, under NAICS code 336419, and is managed by the Department of Defense’s ASC Commodities Division with Antonia Willcox as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336419
New
DIBBS
CASE, LIFE RAFTThe contract specifies the procurement of 53 carrying cases for the LRU-34/A life raft used on V-22 aircraft, with the NSN 4220-01-533-2994 and part number 66106-105, manufactured exclusively by Air Cruisers Company, LLC under approved source designation. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, including palletization as outlined in RP001. The item is designated as a critical application item and may involve covered defense information, requiring strict handling protocols. Delivery is due 150 days after award, with FOB origin, inspection and acceptance occurring at destination, and pricing is firm fixed with no variance allowed in quantity. All packaging and labeling must meet specified military standards and include the correct unit of issue and quantity per unit pack as defined in the contract. The government will receive the cases at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with transportation guided by DLAD procedural notes C19 and C20, and the delivery must be completed no later than May 2, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336419
New
Federal
AMPLIFIERThis contract solicitation, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks qualified contractors to repair an AMPLIFIER under a firm-fixed-price, not-to-exceed, or estimated pricing structure. All bids must adhere to strict military standards including MIL-STD-130 for item marking, MIL-STD-2073 for packaging, and DFARS 252.211-7003 for Item Unique Identification (IUID). The repair turnaround time is fixed at 119 days from physical receipt of the asset as logged in the Commercial Asset Visibility system, and failure to meet this deadline triggers a per-unit, per-month price reduction, with the contractor required to specify the reduction amount and maximum cap. The contract mandates that only authorized repair sources may be awarded, and submission of proof of authorized distributor status is mandatory. All quotes must include detailed pricing, RTAT, cost breakdowns, expiration dates, facility CAGE codes, and explicit affirmation of the ability to meet throughput constraints. The solicitation includes a unilateral government option to increase the order by up to 100%—equivalent to two additional units—within 365 days of contract award, governed by FAR 52.217-6. Contract performance is subject to Navy CAV logistics and inspection protocols, with all repaired items requiring government final acceptance. Records of inspection and testing must be retained for one year post-delivery, and any design or part number changes require prior written approval from the Contracting Officer. Compliance with Buy American provisions, cybersecurity maturity model certification, and the mandatory use of Workflow Pro modules is required. The contract excludes test-and-evaluation-only quotes, and any items deemed beyond repair (BR/BER) may incur a limited negotiation-based fee capped at a specified amount. Responses must be submitted electronically by the deadline to the designated point of contact, and all documentation must conform to Navy distribution controls and security protocols, including NOFORN handling where applicable.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336419
New
Federal
All Up Round plus Canister Simulator (AURCS)The Naval Undersea Warfare Center Division Newport is seeking industry input through a Request for Information to assess capabilities for the future fabrication of the All Up Round plus Canister Simulator, a complex developmental system requiring advanced manufacturing, precision machining, and stringent welding standards. Respondents must demonstrate the capacity to handle large, heavy components with detailed facility infrastructure including lifting and assembly capabilities, along with proven expertise in large-scale precision machining and welding that meets strict military specifications. The future contract effort would involve producing a First Article Unit for validation through Manufacturing Readiness Review and Physical Configuration Audit, followed by recurring production of AURCS units and associated Peculiar Support Equipment, plus ongoing engineering change management and supply chain obsolescence mitigation. The government will provide the Technical Data Package and Statement of Work upon solicitation but currently seeks evidence of industry readiness through a white paper response no longer than ten pages, complemented by supporting visuals. Companies responding must provide a comprehensive company profile including CAGE code, UEI, size classification under NAICS 336419, and point of contact details, while explicitly addressing five key capability areas: facility infrastructure for handling heavy components, precision machining experience with tight tolerances on large assemblies, welding program certification and NDT inspection capabilities, ability to meet aggressive production schedules, and relevant past performance in naval or submarine-related fabrication projects. Two government contract references are required, and proprietary information must be clearly marked. All responses are due by August 14, 2026, submitted via email to designated Navy points of contact. Importantly, this RFI is not a solicitation, does not obligate the government to award a contract, and respondents bear all costs associated with their submission. Access to controlled attachments, including the draft Statement of Work and background slides, requires a SAM.gov role and formal request with justification, and all received information will be handled as Controlled Unclassified Information.
Nuwc Division Newport

POSTED

3 days ago

DEADLINE

in 27 days
View Details
NAICS: 336419
New
DIBBS
First Article Testing (FAT) Preparation and ExecutionThe contract requires the production and delivery of a single test article for First Article Testing to confirm adherence to established design and production specifications, with delivery mandated within 180 days of award. This effort is classified as a subcontract under a Total Small Business Set-Aside, ensuring eligibility is limited to small businesses as defined by the SBA, and falls under the NAICS code 336419 which pertains to other transportation equipment manufacturing. The work is to be performed at Tinker Air Force Base with a zip code of 73145-8000, and the contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 14, 2026, with responses due by July 22, 2026, and is accessible through the DIBBS platform under the solicitation number SPE4A726T569G.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 336419
New
DIBBS
Supply of Aircraft Components and SubassembliesThe contract seeks the supply of OEM or certified replacement aircraft components and subassemblies intended for integration into AI modification kits, ensuring full traceability and complete documentation throughout the supply chain. All provided parts must strictly comply with approved technical data packages to guarantee compatibility, performance, and safety in operational environments. The requirement emphasizes adherence to rigorous quality and regulatory standards, with no tolerance for noncompliant or undocumented components, ensuring the integrity of the modification kits and the aircraft systems they support. Performance of this subcontract is designated for Tracy, California, with a response deadline of July 22, 2026, and the solicitation falls under the NAICS code 336419 for aircraft component and parts manufacturing. The contracting activity originates from the ASC Commodities Division within the Department of Defense, reflecting its military aviation support mission. All suppliers must demonstrate the capability to deliver certified replacement parts with end-to-end traceability, supporting long-term sustainment and mission readiness for defense aviation platforms.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 336419
New
DIBBS
COVER, LAUNCHER, CELLThe contract covers the procurement of eight units of a cover, launcher, and cell assembly under solicitation SPE4A6-26-T-05YX, with a total small business set-aside designation and a NAICS code of 336419. Delivery is required within 351 days after order, and the item is identified by NSN 1440-01-288-1879. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and inspection and acceptance occur at the origin. Government identification must be removed from non-accepted items, and all hardware must be physically marked per RQ017. Mercury and mercury-containing compounds are strictly prohibited unless part of functional batteries, fluorescent lights, sensors, controls, weapon systems, or specified chemical reagents, and portable devices containing mercury must be shock-proof with a secondary containment system as per NAVSEA 5100-003D. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Technical data associated with this item is subject to ITAR or EAR controls, restricting access and disclosure to authorized entities only. Access requires JCP certification, completion of DOD export-controlled data training, and approval from DLA, with DFARS 252.225-7048 applicable. The place of performance is New Cumberland, PA, and the primary point of contact is Ashley Sacolick with the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 336419
New
DIBBS
CABLE ASSEMBLY, SPECThe contract is for the procurement of 11 units of a cable assembly identified by NSN 1420-01-714-8893 under solicitation SPE4A6-26-T-06JS, with a delivery deadline of 171 days after contract award. It is governed by stringent technical and quality requirements referenced from the DLA Master List, including specific controls for inspection, acceptance at origin, and removal of government identification from non-accepted items. The item is subject to export control under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048, and access to associated technical data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally authorized. Cybersecurity compliance is mandated at CMMC Level 2 through a certified third-party assessment organization, and covered defense information protections apply. Packaging must adhere to DLA procurement standards, and tailored higher-level quality requirements are enforced for both manufacturers and non-manufacturers. The contract is managed by the Department of Defense’s ASC Commodities Division, with performance location in New Cumberland, Pennsylvania, and primary point of contact is Monica Greene.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 5 days
View Details
NAICS: 336419
New
DIBBS
CABLE ASSEMBLY, SPECThe contract pertains to a cable assembly specified under NSN 1420-01-714-8784, with a quantity of seven units, and a required delivery within 171 days of award. The solicitation, numbered SPE4A6-26-T-06FP, was posted on July 14, 2026, with responses due by July 22, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The item is subject to stringent cybersecurity requirements, mandating that the supplier be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Technical data associated with this item is controlled under export regulations—either ITAR or EAR—making unauthorized disclosure or transfer to foreign persons, including foreign national employees or overseas subsidiaries, a violation. DFARS 252.225-7048 applies, and access to this data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program status, have completed mandatory DOD export control training, and have been formally authorized by DLA. Documentation for source approval, physical identification of items, and export control compliance are explicitly required. The place of performance is identified as New Cumberland, Pennsylvania, with Vincent Price listed as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 331318
New
DIBBS
PARTS KIT, REEL ASSEThe contract pertains to a parts kit for a reel assembly, specifically designated with NSN 4930-01-524-6930, with a quantity of one unit required under purchase request 7017400121. Delivery must be completed within five days of award. The solicitation, identified as SPE8EE-26-T-2032, was posted on July 17, 2026, with a response deadline of July 22, 2026. It falls under NAICS code 331318 and is issued by the Department of Defense through the Construction & Equipment Manu & Con organization. The place of performance is specified as Fort Stewart, Georgia, with a zip code of 31314-5185. The primary point of contact is Philip Ferrara, reachable via email and phone provided. This procurement is subject to DLA packaging requirements and integrates technical and quality specifications referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. The applicable revision of the master list is determined by the solicitation issue date for simplified acquisitions, unless amended, in which case the amendment date governs. Additionally, government identification must be removed from any non-accepted supplies as per the RQ011 requirement.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332420
New
DIBBS
Commercial Item Supplier for Industrial Equipment ComponentsThe contract is for the supply of commercial off-the-shelf components including fabricated metal parts, hydraulic systems, and electrical controls used in the assembly of clamshell equipment, all of which must comply with established commercial or military specifications. These components are essential for the functionality and reliability of industrial equipment used by the Department of Defense and are intended for performance at the specified location in Lima, Ohio, with the zip code 45804-3700. The contract is classified as a subcontract and falls under the NAICS code 332420, which pertains to forged and stamped metal product manufacturing. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, leaving a limited window for potential suppliers to submit proposals. There is no set-aside designation specified, meaning the opportunity is open to all qualified vendors regardless of business size or ownership status. The contracting activity is managed under the agency name CONSTRUCTION & EQUIPMENT MANU & CON, and the official point of contact information is not provided in the available data. Interested parties must access the DIBBS portal via the provided link to obtain full details and submit responses.
Metal Tank (Heavy Gauge) Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CDI SafeguardingThe contract requires full implementation and documentation of NIST SP 800-171 controls to safeguard Covered Defense Information (CDI) across all relevant systems and processes. This includes establishing technical, administrative, and physical safeguards to ensure the confidentiality, integrity, and availability of CDI, as well as conducting a thorough system assessment to validate compliance with all specified controls. The contractor must also establish and maintain procedures for timely cyber incident reporting in accordance with federal requirements, ensuring rapid identification, response, and escalation of any security breaches or anomalies affecting CDI. The effort is structured as a subcontract under the Department of Defense, with performance focused at a specified location in Lima, Ohio, 45804-3700. The North American Industry Classification System code 541512 indicates this contract pertains to computer systems design services, reflecting the technical nature of the compliance work. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, leaving a limited window for qualified entities to submit proposals. Compliance with NIST SP 800-171 is mandatory, and the contractor must demonstrate not only technical implementation but also comprehensive documentation and readiness for audit or assessment by government entities.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Safety Data ManagementThe contract requires comprehensive management of hazardous materials associated with the clamshell assembly, encompassing accurate identification, proper labeling, and thorough documentation in accordance with OSHA and military safety regulations. This includes the preparation and maintenance of up-to-date Safety Data Sheets (SDS) for all hazardous substances used in or transported with the assembly, ensuring full compliance with federal and defense-specific standards. The work must support safe handling, storage, and transportation practices while maintaining meticulous records for audits and operational readiness. Performance is expected at the specified location in Lima, Ohio, with a strict response deadline of July 27, 2026, and the solicitation was posted on July 16, 2026. The contract falls under NAICS code 541620, indicating its classification as scientific and technical consulting services related to safety and compliance, and is structured as a subcontract within the Department of Defense’s procurement framework. All activities must align with defense requirements and ensure that hazardous material handling meets the highest safety and regulatory benchmarks without deviation.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333120
New
DIBBS
Manufacture and Supply of Clamshell Assembly (NSN 3815-01-463-9925)The contract entails the full manufacturing, assembly, testing, and delivery of a clamshell assembly in strict adherence to military National Stock Number specifications, specifically NSN 3815-01-463-9925. All work must comply with applicable military packaging, labeling, and hazardous materials handling standards to ensure operational safety and regulatory conformity. The scope encompasses end-to-end production, from raw material processing through final quality assurance testing, with delivery targeted to the specified place of performance in Lima, Ohio, under the ZIP code 45804-3700. This is a subcontract opportunity under NAICS code 333120, categorized under the Department of Defense’s Construction & Equipment Manu & Con organization. The solicitation was posted on July 16, 2026, with a response deadline of July 27, 2026, providing potential bidders a 11-day window to submit proposals. While no set-aside type is designated, the procurement is administered through the Defense Logistics Agency’s DIBBS platform, and interested parties must access the official solicitation via the provided digital link to obtain detailed technical requirements and submission guidelines.
Construction Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight & FOB Origin Shipment CoordinationThe contract requires coordination for the domestic transportation of finished aircraft wheels from FOB origin points to designated DLA destinations, ensuring full compliance with U.S.-flag vessel requirements when international shipping is involved. Carriers must be effectively managed throughout the logistics chain to guarantee timely, secure, and regulatory-compliant delivery, with particular attention to handling specialized aviation components under strict defense supply protocols. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, reinforcing support for small business participation in defense logistics. This procurement is categorized under NAICS code 484220 for general freight trucking and is administered by the Department of Defense through the Construction & Equipment Manu & Con agency. Performance is centered at New Cumberland, Pennsylvania with a ZIP code of 17070-5002, indicating that even though shipments originate and terminate at various locations, administrative oversight and key logistics coordination are consolidated here. The solicitation was posted on July 16, 2026, with a response deadline of July 27, 2026, giving interested parties approximately eleven days to prepare and submit proposals under the DIBBS platform using solicitation number SPE8EF26T1468.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThis contract requires the identification, documentation, and submission of Safety Data Sheets for all hazardous materials used in manufacturing or packaging operations, ensuring full compliance with OSHA’s Hazard Communication Standard and Department of Defense requirements. The work focuses on maintaining accurate, current, and accessible SDS records to support worker safety, regulatory reporting, and operational readiness within a DoD-managed facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. All materials handled must be systematically tracked and documented to meet federal safety protocols and ensure continuity across supply chain and production functions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, classified under NAICS code 541620 for environmental consulting services, and is exclusively available to small businesses certified by the Small Business Administration. Responses are due by July 27, 2026, with the opportunity posted on July 16, 2026. The requirement emphasizes procedural rigor in managing hazardous materials documentation, with adherence to regulatory timelines and format standards as dictated by federal guidelines. Performance will be conducted on-site at the specified location, and the contractor must demonstrate proven capability in hazardous materials compliance systems, SDS management, and coordination with defense sector clients.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThis contract requires the delivery of military-compliant packaging, palletization, and moisture protection services specifically for aircraft wheels, ensuring full adherence to DLA standards. All packaging must include proper moisture barriers, secure pallet configurations, and compliant MIL-STD-129 barcoding and labeling to ensure traceability and readiness for military logistics systems. The work must be performed in accordance with federal acquisition regulations and is designated as a total small business set-aside under the SBA program, reserved exclusively for small businesses. The North American Industry Classification System code for this solicitation is 561910, indicating it falls under other support activities for waste management and remediation services, though the nature of work is clearly focused on defense logistics and packaging. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all deliverables must be completed by the response deadline of July 27, 2026. The contract is structured as a subcontract under the Department of Defense’s Construction and Equipment Manufacturing and Construction division, with the official solicitation available through the DIBBS platform.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
Precision Machining of Aircraft Wheel ComponentsPrecision machining services are required for critical aircraft wheel components including hubs, flanges, and mounting surfaces, to be manufactured using aerospace-grade materials with strict dimensional tolerances to meet rigorous safety and performance standards. The work must adhere to industry-specific quality controls and processes suitable for defense applications, ensuring reliability under extreme operational conditions. The contract is a total small business set-aside under SBA guidelines, reserved exclusively for small businesses as defined by the NAICS code 332999, and is issued as a subcontract under the Department of Defense. Performance is designated for New Cumberland, Pennsylvania, with a response deadline of July 27, 2026, following the posting date of July 16, 2026. All proposals must demonstrate technical capability, compliance with aerospace manufacturing requirements, and capacity to meet the set-aside eligibility criteria.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336390
New
DIBBS
Aircraft Wheel Manufacturing – Rear Wheel Assembly (NSN 1740-01-538-2581)The contract calls for the manufacture of 100 rear aircraft wheels in full compliance with military specifications, encompassing complete final assembly, rigorous quality inspection, and packaging that meets Defense Logistics Agency standards. The work is tied to the National Stock Number 1740-01-538-2581 and must be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002. The procurement is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, as defined under FAR 19.5 and NAICS code 336390. The solicitation was posted on July 16, 2026, and all responses must be submitted by July 27, 2026, with the contracting activity managed by the Department of Defense under the Construction & Equipment Manu & Con organization.
Other Motor Vehicle Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
DIBBS
Military Packaging, Labeling, and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services to support logistics readiness and long-term storage of equipment and materials under the standards of DLA RP001 and MIL-STD-130N. These services must ensure that all items are properly protected against environmental damage, marked with authorized identification labels, and prepared for transport and storage in accordance with Department of Defense specifications. The work is critical to maintaining the operational readiness of military assets over extended periods and must adhere strictly to technical and procedural requirements for traceability, durability, and compliance. This subcontract opportunity, issued by the Department of Defense under the NAICS code 561910, is focused on services to be performed in Jacksonville, Florida, with a response deadline of July 23, 2026. Although the solicitation number and point of contact details are not included in the data provided, interested parties can access further information through the official DIBBS portal using the provided link. The nature of the work requires specialized expertise in military packaging standards, and contractors must demonstrate capability to meet stringent federal requirements for preservation methods, labeling accuracy, and documentation integrity.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 541512
New
DIBBS
CMMC Level 2 Cybersecurity Compliance and AssessmentThe contract seeks a subcontractor to deliver comprehensive cybersecurity compliance services aimed at achieving CMMC Level 2 certification, with a focus on aligning with NIST SP 800-171 standards for the protection of Covered Defense Information. Services include readiness assessments to evaluate current cybersecurity posture, detailed gap analyses to identify deficiencies, remediation planning and execution to address vulnerabilities, and ongoing support through the official certification process. The work is critical for entities handling sensitive defense data and must ensure full adherence to federal cybersecurity requirements under the Department of Defense framework. Performance of this contract is required to occur at a designated location in Jacksonville, with a ZIP code of 32212-0103, and must be completed in alignment with the response deadline of July 23, 2026. The solicitation is classified as a subcontract under NAICS code 541512, indicating it involves computer systems design and related services, and is issued by the Department of Defense under the contracting entity Construction & Equipment Manu & Con. All activities must support the acquisition and maintenance of CMMC Level 2 certification, ensuring the organization can securely process, store, and transmit Controlled Unclassified Information in accordance with mandated federal standards.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 5 days
View Details