Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Department Of Defense was posted on July 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

COVER, RADOME

Closed
SPE7M5-26-T-323QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326299
New
Federal
USCG Base Miami Beach Replacement Fenders
Solicitation # 31020PR260000231
The United States Coast Guard Base Miami Beach Facilities Engineering division is soliciting quotations for a firm-fixed-price contract to procure three high-performance, foam-filled marine fenders. These fenders must have a nominal diameter of 5 feet and a length of 8 feet, featuring a 100 percent closed-cell foam core and a minimum 1.0 inch reinforced elastomeric polyurethane skin in non-marking marine black. A critical requirement is that all internal tension components, swivel end fittings, and bow or anchor shackles be constructed exclusively from Type 316 stainless steel to withstand harsh saltwater environments. The procurement includes the delivery of the fenders, technical data submittals, and logistics, with all items delivered FOB Destination to Base Miami Beach. The solicitation is a 100 percent total small business set-aside under NAICS code 326299. Award will be based on the best value, defined as the lowest evaluated price among technically acceptable offerors. Technical acceptability is contingent upon meeting specific performance ratings, including a minimum energy absorption of 136 ft-kip and a maximum reaction force of 101 kip. Additionally, the manufacturer must maintain an active ISO 9001 certification and provide certified mill test reports for all stainless steel hardware. Fabrication cannot begin until the Contracting Officer Representative provides written approval of all technical submittals, which are due within 15 calendar days of the award.
Base MIAMI(00028)

POSTED

about 23 hours ago

DEADLINE

in 6 days

AI Contract Overview

Show more

The contract is for the procurement of 80 units of a radome cover identified by NSN 5985-01-222-5315 under solicitation SPE7M5-26-T-323Q, with a delivery deadline 248 days after award. The requirement is for full and open competition and falls under NAICS code 326299, administered by the Department of Defense’s Active Devices Division. The supplier must comply with cybersecurity certification at CMMC Level 2 as a certified third-party assessment organization and adhere to all technical and quality requirements referenced from the DLA Master List, with the applicable revision determined by the solicitation or award date. The cover must not contain intentional mercury or mercury compounds and must avoid direct contact with such substances, except for approved functional uses in batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable devices containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Technical data associated with the item is subject to export controls under ITAR or EAR, requiring prior government authorization for any transfer, including disclosure to foreign persons, within or outside the U.S., and only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access this data. The delivery location is New Cumberland, Pennsylvania, with 17070-5002 as the zip code, and the point of contact is Matthew Stanko at DLA.

General Info

Procure 80 radome covers, NSN 5985-01-222-5315, deliver in 248 days, CMMC Level 2, no mercury, ITAR/EAR controlled, to New Cumberland, PA.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-323Q for DLA Land and Maritime

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA

Full Description

Show more
COVER,RADOME
RADOME, COVER
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
FULL AND OPEN COMPETITION APPLIES.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5985-01-222-5315 Quantity: 80 EA Purchase Request: 7017383876QTY: 80 Delivery: 248 days ADO

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7M5-26-U-0065
Solicitation SPE7M5-26-U-0065 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Active Devices Division, for the procurement of 3,182 spiral wound gaskets under NSN 5330-00-348-9152. This is a total small business set-aside under NAICS code 339991, structured as a unilateral indefinite delivery contract with a maximum value of 350,000 dollars. The delivery requirement is 63 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including RA001, RP001, and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved JCP certification and specific DLA training. Additionally, the item must be free of asbestos per FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act and Berry Amendment, and those utilizing non-domestic materials must provide full disclosure. Quotes are due by September 11, 2026, via the DIBBS portal, and must not utilize additive manufacturing unless specifically authorized.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-455B
Solicitation SPE7M5-26-T-455B, issued by DLA Land and Maritime Active Devices Division, is a request for quotations for four linear microcircuits, identified by NSN 5962012477674 and part number HI1-5047A/883 from Renesas Electronics America Inc. The procurement is for a critical application item and is categorized as a commercial item. Delivery is required within 143 days, with a need ship date of February 2, 2027, and a final required delivery date of July 1, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution DDWO in Columbus, Ohio. The contract imposes stringent quality and technical requirements, including CMMC Level 2 self-assessment and strict supply chain traceability. Contractors must provide DLA Land and Maritime Form 918 and associated traceability or test reports at least 15 days prior to the delivery date to receive shipping authorization. Packaging must adhere to MIL-STD-2073-1E and MIL-PRF-81705 for ESD and EMI protection, with specific cushioning requirements per A-A-59136 to prevent lead damage. Marking must comply with MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Additionally, the contractor must ensure that mercury is not intentionally added to the hardware and must comply with the Buy American and Balance of Payments Program. All quotes must be submitted via the DIBBS portal by September 11, 2026.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS