This Government Contract opportunity from Florida was posted on December 15, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CPT System Integration and Calibration Services

Closed

State & Local

Submission Closed12/18/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting lump sum bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all labor, transportation, tools, and materials to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, as well as resurfacing the flywheel and replacing hydraulic pipes and filters as necessary. All work must be performed according to manufacturer specifications and verified through operational testing under load before final acceptance by the Facility Maintenance Department. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms, under NAICS code 811310. Interested bidders must submit a bid sheet, completed supplier packet (including W-9 and self-certification), and proof of insurance to Angie Mahoney by November 3, 2026, at 3:00 PM CST. Award will be based on best value. The contract incorporates various Federal Acquisition Regulation clauses, including requirements for combating trafficking in persons, Buy American compliance, and adherence to Service Contract Act wage determinations for Kentucky. Final deliverables must include a summary of diagnostic findings, an itemized list of parts and services, and applicable warranty documentation.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 27, 2026, and requires all responses to be submitted by the deadline of November 4, 2026, at 7:00 PM. Interested parties can access further details and submit their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES

Solicitation # 2026-RFP-130

Lakeland Electric is soliciting proposals under RFP 2026-RFP-130 to establish a pool of qualified contractors for the annual inspection, testing, repair, reconditioning, and storage of critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of assets, including low- and medium-voltage AC/DC electric motors and circulating water and condensate pumps. Required services include clean inspection tests, troubleshooting, motor rewinding, dynamic field balancing, laser alignment, and vibration analysis. Additionally, the selected contractors must provide logistics support, including pickup, delivery, and secure indoor storage with ongoing preservation activities such as shaft rotation and lubrication. Proposals are due by 3:00 pm on October 30, 2026, via the OpenGov portal. Award decisions will be based on a 100-point scoring system evaluating pricing (30%), qualifications and experience (25%), technical and facility capabilities (25%), service approach and response (15%), and past performance (5%). Mandatory submittals include a signed W-9, Florida Sunbiz registration, a notarized Hold Harmless Indemnification Agreement, and a Human Trafficking Affidavit. Contractors must adhere to strict safety standards, including OSHA regulations for crane operations and powered industrial trucks, and must certify compliance with drug-free workplace and suspension and debarment regulations.

LE - Production - MPP

POSTED

DEADLINE

Generator Remote Monitoring and Notification ServicesThis subcontract for Generator Remote Monitoring and Notification Services involves the remote oversight of backup power generators for prime contractors working on Baldwin County Health Department projects in Alabama. The selected provider will utilize telemetry to monitor critical metrics, including generator health, fuel levels, and battery status, to ensure the delivery of automated failure notifications and regular status reports. To qualify for this engagement, contractors must possess professional electrical technician licensing and hold specific manufacturer authorizations for the generator brands being serviced. The primary objective is the implementation and maintenance of an active monitoring system that ensures power reliability through consistent health tracking and reporting.

POSTED

DEADLINE

Airport Baggage Handling System

Solicitation # PUR-RFP2026.08.10068

The City of San Jose is seeking responses from qualified vendors for an Airport Baggage Handling System under solicitation number PUR-RFP2026.08.10068. All proposals must be submitted electronically via Biddingo by December 4, 2026, at 12:00 PM PT. The contract will be awarded based on a best value evaluation rather than price alone, and preference may be given to Local and Small Business Enterprises that maintain an office in Santa Clara County and hold a valid City of San Jose Business Tax Certificate. Vendors are instructed to exclude sales tax from their initial responses, as the city will determine the applicable tax upon award. It is important to note that any quantities provided in the solicitation are estimates and are not guaranteed, meaning variations in volume will not justify adjustments to unit pricing or rates. Further details and required documentation are available through the official solicitation documents and the Biddingo platform.

City of San José - Purchasing

POSTED

DEADLINE

Fuel System Maintenance and Repair

POSTED

DEADLINE

Laboratory Instrument Installation and CalibrationThis subcontract, titled Laboratory Instrument Installation and Calibration, involves the physical installation, setup, and calibration of the THW-L1S system for prime contractors supporting NASA Marshall Spaceflight Center projects. The scope of work includes transporting and positioning equipment within Lab 105E of Building 4205, establishing power and temperature control connections, and performing precise calibrations for volumetric specific heat and thermal conductivity measurements. Managed by the NASA Shared Services Center under NAICS code 811310, the project requires personnel with specific security clearance for access to Building 4205. The final deliverable is a fully commissioned and calibrated system. The solicitation was posted on October 27, 2026, with a response deadline of October 30, 2026.

NASA Shared Services Center

POSTED

DEADLINE

Uninterruptible Power Supply (UPS) Maintenance and Repair

W2SD Endist Baltimore

POSTED

DEADLINE

Propulsion and Machinery MaintenanceThis subcontract for Propulsion and Machinery Maintenance supports prime contractors on Puget Sound Naval Shipyard IMF projects under the Department of Defense. The scope of work focuses on the mechanical overhaul of propulsion systems, specifically including the servicing of Schottel Z-drive units and the overhaul of twin disc transmission coolers utilizing Dexron III fluid. Additionally, the contractor is responsible for propeller cleaning and the associated documentation, ensuring the final delivery of all serviced propulsion units and overhauled coolers. The opportunity is categorized under NAICS code 811310 and was posted on October 27, 2026. Interested parties must submit their responses by the deadline of November 3, 2026, at 8:00 PM.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

Refrigeration Unit Teardown and Repair Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Inspection, Testing, and Repair of Rosemount Model 6888 Oxygen Sensors

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Forklift and Utility Vehicle Safety & MaintenanceThis subcontract opportunity involves providing specialized safety inspections and routine maintenance for forklifts and utility vehicles at the Golden Gate National Cemetery in San Bruno, California. Working under prime contractors for the National Cemetery Administration within the Department of Veterans Affairs, the selected provider will perform rigorous safety system checks and operational compliance inspections utilizing forklift-specific checklists and testing tools to ensure all equipment meets strict safety standards. The project requires certified technicians with proven experience in forklift safety standards to deliver detailed, certified safety inspection reports. This opportunity falls under NAICS code 811310, with a response deadline set for November 3, 2026.

National Cemetery Administration (36C786)

POSTED

about 19 hours ago

DEADLINE

in 6 days

AI Contract Overview

The CPT System Integration and Calibration Services subcontract involves the technical integration of a cone penetrometer system onto a 20-ton truck chassis. The scope of work encompasses the complete installation of hydraulic, electrical, and data acquisition systems, ensuring the equipment is fully operational and integrated with the vehicle. Following installation, the contractor is responsible for performing both factory and field calibrations to ensure the system adheres to ASTM D5778 and Florida Department of Transportation standards. This project is managed under the Florida Department of Transportation and will be performed in Tallahassee.

General Info

Agency

Florida Department of Transportation

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Tallahassee, FL, USA

Set-Aside

NONE

Documents

This scope was carved out of DOT-ITB-26-5006-PTS.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

20 Ton Truck Mounted Cone Penetrometer Testing System

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedDec 15

subcontract

Response DeadlineDec 18

Deadline has passed

Submission Closed

12/18/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyFlorida Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / AgencyFlorida Department of Transportation

Office AddressN/A

ContactsNo contact information available

Full Description

Integration of the cone penetrometer system onto a 20-ton truck chassis, including hydraulic, electrical, and data acquisition system installation, followed by factory and field calibration to meet ASTM D5778 and FDOT standards.