Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Crane

Active

W911S226U3943Federal

Response Deadline08/18/2026, 04:55:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A single spider crane with a lifting capacity of 6400 pounds is being procured under solicitation number W911S226U3943, issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. The equipment includes a wireless remote control system and a quick install jib system to enhance operational efficiency and ease of deployment. This procurement is designated as a Small Business Set Aside under NAICS code 333120, specifically reserved for small businesses, with bids due by August 18, 2026, at 4:55 a.m. Eastern Time. The place of performance is listed with a zip code of 22211, and the primary point of contact is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or phone at 703-614-0476. The solicitation was posted on August 10, 2026, and is a combined type of acquisition, indicating potential for both contract award and delivery order processes.

General Info

Small business set aside for 6400-lb spider crane with wireless remote and jib system, due August 18, 2026.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

1 Memorial Dr Arlington VA Arlington National Cemetery, NY, 22211

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 10

Combined Synopsis

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 04:55:00 AM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts1 person available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / Agency

Department Of Defense → W6QM Micc-Ft Drum

View Agency Profile

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

Anthony Zyla

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Qty: 1 Spider crane that has lifting capacity of 6400lbs wireless remote control system, quick install jib system

Similar Contracts

Same NAICS industry code

BULLDOZER FOR SHIPROCK FIELD OFFICEThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the acquisition of a bulldozer to support operations at the Shiprock Field Office. This procurement is classified under NAICS code 333120, indicating it relates to the manufacturing of construction machinery, specifically dozers. The opportunity is intended for small business participation, though no specific set-aside type has been designated. The posting date is listed as August 10, 2026, suggesting this is a forward-looking forecast rather than an active solicitation. No details are provided regarding the quantity, model specifications, or delivery timeline, and the place of performance and office address fields are incomplete. The point of contact for small business inquiries includes two program managers at WAPA, both reachable via email, serving as the primary liaison for interested parties seeking to engage with this upcoming requirement.

Western Area Power Administration

POSTED

about 11 hours ago

DEADLINE

305 & 308 CAT MINI EXCAVATORS W/ATTACHMENTSThe Western Area Power Administration, under the Department of Energy, has issued a forecast for the acquisition of two models of Caterpillar mini excavators, specifically the 305 and 308, each equipped with necessary attachments. This procurement is classified under NAICS code 333120, indicating it pertains to construction machinery manufacturing, and is intended to support operational needs through the provision of specialized earthmoving equipment. The forecast is posted for informational purposes and does not constitute a solicitation or binding obligation, though it signals intent to procure in the future. The place of performance and specific delivery location have not been designated, and no set-aside classification has been indicated, meaning the opportunity is open to all eligible vendors without restrictions based on business size or other categories. Small business program managers at the agency, reachable via provided email addresses, serve as the primary contacts for inquiries related to this forecast. The posting date indicates this information became publicly available in August 2026, allowing potential suppliers time to prepare for a future solicitation.

Western Area Power Administration

POSTED

about 11 hours ago

DEADLINE

CASPER EXCAVATORThe Western Area Power Administration, under the Department of Energy, has issued a forecast for a procurement related to the CASPER EXCAVATOR under NAICS code 333120, which pertains to construction machinery manufacturing. This procurement is designated for small businesses, indicating a set-aside opportunity aimed at supporting small business participation in federal contracting. The place of performance is located in Georgia, suggesting that any awarded contract will require operations or deliverables within that state. The solicitation is currently in the forecasting stage, meaning it is not yet open for bids but provides advance notice to potential contractors of an upcoming opportunity. Two Small Business Program Managers are listed as points of contact, both reachable via email at tetrault@wapa.gov and setzel@wapa.gov, responsible for assisting small businesses with inquiries related to this forecast. The posting date indicates this forecast was published on August 10, 2026, and while no solicitation number or detailed contract terms are currently available, interested parties are encouraged to monitor official channels for future updates. The absence of specific city, zip code, or office address details suggests the requirements may still be in preliminary development, with more precise information expected as the procurement advances toward a formal solicitation.

Western Area Power Administration

POSTED

about 11 hours ago

DEADLINE

PURCHASE BOBCAT T770 COMPACT TRACK LOADER FOR HU ELECTRICIANS, EO 14398The Western Area Power Administration under the Department of Energy has forecasted a procurement for a Bobcat T770 Compact Track Loader intended for use by Hu Electricians, tied to Executive Order 14398. The acquisition is designated for small businesses, aligning with the NAICS code 333120 for construction machinery manufacturing. The place of performance is in Georgia, though specific city and zip details are not provided. The procurement is currently in the forecasting stage, with no solicitation number assigned yet and a posted date of August 10, 2026. Two Small Business Program Managers, Tetrault and Setzel, serve as points of contact, both reachable via email through wapa.gov, to assist small businesses interested in this upcoming opportunity. This forecast signals a future procurement intent, allowing eligible vendors to prepare accordingly for formal solicitation.

Western Area Power Administration

POSTED

about 11 hours ago

DEADLINE

PURCHASE FRONT END LOADER FOR PIERRE LINE CREWThe Western Area Power Administration, under the Department of Energy, has posted a forecast for the purchase of a front end loader to support the Pierre Line Crew, with the procurement categorized under NAICS code 333120 for construction machinery manufacturing. The anticipated acquisition is intended for use in Texas, though the specific city of performance is not detailed, and the contract type is classified as a forecast with no set-aside designation, indicating it is open to all eligible vendors without preferential treatment for small businesses or other categories. The point of contact for the opportunity includes two Small Business Program Managers reachable via email, suggesting that while the procurement is not formally reserved for small businesses, engagement with them is still a focus area. The posting date is listed as August 10, 2026, indicating this is a future procurement forecast, and no solicitation number or formal deadline is yet available. Interested parties should monitor official channels for subsequent updates or formal solicitations, as this entry serves only as an early indicator of planned spending.

Western Area Power Administration

POSTED

about 11 hours ago

DEADLINE

TRACK SHOE ASSEMBLY

Solicitation # SPE7L1-26-T-947X

The contract is for the procurement of two Track Shoe Assemblies, identified by NSN 2530-01-314-6415 and part numbers 3P1027 from CATERPILLAR INC and 53778 from INTERTRACTOR AMERICA CORP, with a total quantity of two units. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using wooden crates of overseas type capable of handling over 3200 lbs, constructed to MIL-C-104 or ASTM D6039 standards. Corrosion protection, grease-proof wrapping, and moisture control measures are mandatory for all containers. The items are designated as critical application components and must be marked with the center of balance code 14. All packaging, marking, and shipping must adhere to DLA procurement requirements and the DLA Master List of Technical and Quality Requirements referenced in the document. Shipment must be sent via traceable means, excluding parcel post, to the designated military facility in Little Falls, MN. The freight and marking addresses are identical, and the shipment is classified as RDD with no NMCS designation. The contract is issued under solicitation SPE7L1-26-T-947X, with a required delivery date of August 7, 2026, and is managed by the Department of Defense’s Land Supply Chain. The primary point of contact is Kristina Derry, and the National Industrial Security Program Code is 333120. The contract is subject to DoD unit of issue standards and federal procurement protocols, with all documentation and compliance requirements binding on the supplier.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Devens RFTA Range Control Dirt Sifter Machine Purchase Contract

Solicitation # W15QKN26QA156

The solicitation W15QKN-26-Q-A156, titled Devens RFTA Range Control Dirt Sifter Machine Purchase Contract, seeks a single tracked or wheeled topsoil screener capable of processing soil at Fort Devens Reserve Forces Training Area in Massachusetts to produce fines of 0.5 inches or less, removing rocks, debris, and roots. The equipment must be compatible with Bobcat loading operations, and the contractor is responsible for delivery, installation, operational training of Range Control personnel, and ensuring compliance with all technical specifications outlined in Attachment 0002, the Dirt Sifter Specs, and the Statement of Work in Attachment 0001. Performance is required over a 90-day period during business hours, with delivery due no later than May 12, 2026, at the FOB destination location W13GQF, where the Government will conduct final inspection and acceptance. The contract is a firm-fixed-price award under a Lowest Price Technically Acceptable (LPTA) evaluation method, where price is the primary factor and technical acceptability—determined by compliance with the SOW and specifications—is a pass-fail threshold; any unbalanced pricing or failure to meet requirements disqualifies an offer. Amendment 0002 extended the offer submission deadline from August 10, 2026, to August 14, 2026, at 10:00 AM local time, to allow vendors adequate preparation time, with all other solicitation terms unchanged. Proposals must be submitted electronically to Michael Romano and Jasmyne Peterson via email and must include the completed SF 1449, Unique Entity ID, CAGE code, tax identification number, and socioeconomic certifications if claimed. The offeror must also comply with stringent security protocols including Personal Identity Verification (PIV) under FAR 52.204-9, background screening per AR 525-13, and adherence to Fort Devens Provost Marshal policies for facility access; all personnel must pass suitability and trustworthiness evaluations. Invoicing is mandated through Wide Area WorkFlow (WAWF), with payments processed by HQ0490, and no other invoicing methods are acceptable. Contract administration and invoicing support are handled by Melanie J. Karl, while Daniel Sanchez serves as the Contracting Officer Representative. The contract incorporates numerous FAR and DFARS clauses including 52.21

W6QK Acc-Ri-Picatinny

POSTED

about 21 hours ago

DEADLINE

Tracked Mini Stand on Skid Steer with Attachments

Solicitation # W912EK26QA042

The United States Army Corps of Engineers - Rock Island District plans to issue a solicitation for a Tracked Mini Stand on Skid Steer with Attachments, specifically seeking one unit each of the mini stand on skid steer, a 42-inch bucket, and a 48-inch pallet fork. This pre-solicitation notice is strictly informational and does not constitute a commitment to purchase or any obligation on the part of the government; no reimbursement will be provided for costs incurred in responding to this notice or any subsequent requests. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 333120, ensuring eligibility is limited to small businesses. The official solicitation number is W912EK26QA042, and responses must be submitted by July 9, 2026, at 7:00 PM Eastern Time. The procurement is managed by the W07V Endist Rock Island office located in Rock Island, Illinois, with performance expected in Pleasant Valley, Iowa. For inquiries, contact Carrie Holub at carrie.l.holub@usace.army.mil.

W07V Endist Rock Island

POSTED

about 21 hours ago

DEADLINE

Aberdeen Test Center CAT 299D3 Non-Line Of Sight (NLOS) Remote Operations Kit

Solicitation # W91CRB-CAT-299D3-NLOS

The U.S. Army Contracting Command at Aberdeen Proving Ground, Maryland, is seeking a firm-fixed-price contract to convert a government-owned CAT 299D3 Skid Steer Loader, serial number LB301509 equipped with a forestry mulcher, into a remotely operated, non-line-of-sight unmanned platform using a brand-name Caterpillar Command NLOS Remote Operations Kit. This requirement is being procured under simplified procedures per FAR 12.201 with a sole-source justification under FAR 12.102(a), targeting a total contract value of approximately $50,000. The contractor is responsible for supplying all necessary hardware, including two vision kits, a Wi-Fi kit, a Mobile Mark LTM Dome Antenna, a CISCO IW3702 CPU, an Axiomatic Power Converter, a command station, display arm, pedestal set, television and monitor systems, power telescoping antenna mast, radio equipment, site camera, and communications antennas, along with the full Caterpillar Command Center upgrade. Installation must be performed on-site at the Aberdeen Test Center, and a single training session for up to three personnel is required. All components must be delivered, installed, and fully operational by September 30, 2026, with final government acceptance triggering a full one-year commercial manufacturer’s warranty. Documentation deliverables include complete operator’s manuals and OEM warranty certificates. The acquisition is classified under NAICS code 333120 with a small business size standard of 1,250 employees, and no set-aside is planned. Quotes will be evaluated solely on technical acceptability and lowest price, with the RFQ due within five days of issuance and responses due no later than August 21, 2026. The contract will be managed by Contracting Officer Karen Gibson and Requirements Representative Ben Gallardy, with performance occurring exclusively at the government facility in Aberdeen Proving Ground, Maryland.

POSTED

about 21 hours ago

DEADLINE

Solicitation # W911S226U3972

The contract is for the procurement of one DV60 Cabin dumper equipped with turf tires sized 41x18LL-22.5, designed for turf-specific operations with a 6-ton capacity and a 180-degree swing capability. The unit includes a ROPS/FOPS Level II certified cab, air conditioning, and full work lighting to ensure operator safety and functionality in varied conditions. This is a combined solicitation under the Small Business Set Aside program, exclusively open to small businesses as defined by the SBA, and falls under the NAICS code 333120 for construction machinery manufacturing. The solicitation number is W911S226U3972, posted on August 10, 2026, with a response deadline of August 18, 2026, at 4:55 AM Eastern Time. The purchasing agency is the Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, and the item is to be delivered to a performance location with the zip code 22211. Primary point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or phone at 703-614-0476.

W6QM Micc-Ft Drum

POSTED

about 21 hours ago

DEADLINE

Notice of Intent USACE MVK Crawler Crane (9502 Crane Barge Replacement)

Solicitation # W912EE26RA022

The U.S. Army Corps of Engineers – Vicksburg District is preparing to issue a sole source purchase order to Liebherr-America, Inc. for the acquisition of a single new commercial-grade crawler crane specifically designed for floating marine service, intended to replace the 9502 Crane Barge. This procurement follows Federal Acquisition Regulation Part 12 governing commercial products and services, and although it is not a competitive solicitation, any entity believing it can meet the specified requirements may submit a capabilities statement by 3:00 PM CST on August 20, 2026. Submissions must be sent via email only, and no telephone inquiries will be accepted. The government retains full discretion to determine whether to proceed with sole source award or open the opportunity to competition based on the responses received. The contract falls under NAICS code 333120, pertains to construction machinery manufacturing, and the equipment will be delivered and operated in Vicksburg, Mississippi. Contact for all inquiries and submissions is Javonta Roper and Dustin Cannada at their designated .mil email addresses.

W07V Endist Vicksburg

POSTED

about 21 hours ago

DEADLINE

Supply of POLY BR Kit (NSN: 3805015536640)The contract requires the procurement and delivery of one unit of the KIT, POLY BR, identified by part number CATERPILLAR INC 11083 P/N 5627622 and National Stock Number 3805015536640, ensuring full compliance with technical specification TDP Rev A Gen 1. The item must adhere to all applicable hazardous materials labeling requirements and military shipment marking standards to ensure safe handling and transportation in accordance with defense regulations. The delivery location is specified as Camp Pendleton, California, with zip code 92055-5861, and the contract is classified as a subcontract under NAICS code 333120, indicating its association with construction and equipment manufacturing. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, providing potential suppliers with a twelve-day window to submit proposals. The contract is managed by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MANU & CON, though no specific point of contact information is provided. Bidders must reference the official DIBBS platform link to access full solicitation details and ensure all submission requirements are met. The absence of a set-aside designation means the contract is open to all eligible contractors without restriction based on business size or type.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

Solicitation # W911S226U3976

This mobile command trailer is a fully custom-built, 33-foot bumper pull unit designed for high-performance emergency response and tactical operations, featuring a triple-axle chassis and 100 percent in-house construction from frame to finish. The trailer includes a front communications room with five fully equipped workstations, each outfitted with duplex outlets and Ethernet connectivity, alongside custom-made cabinets and overhead storage. Three additional workstations and an electrical cabinet are situated on the driver side, with one workstation specifically configured to control the front-mounted 8 to 30 ft Wil-Burt pneumatic mast, which supports a high-performance PTZ camera and integrates with Nycoil conduit for clean cable management. The trailer is equipped with a 42-inch TV on both the front and rear walls, capable of displaying live camera feeds or connecting to external laptops for real-time situational awareness. A dedicated conference room with a central table, six ergonomic chairs, and oversized whiteboards supports collaborative decision-making, with a second entrance door providing direct access. The rear of the trailer houses a secure, accessible generator compartment separated by a false back wall, which includes access doors to the electrical panel and overhead storage, along with a counter. Exterior features include seven scene lights for nighttime operations and an 18-foot electric awning spanning the passenger-side doors, creating a covered outdoor workspace. The trailer is built to meet the demanding requirements of military and emergency operations with integrated electrical, communications, and environmental systems. This contract, solicitation number W911S226U3976, is issued by the U.S. Department of Defense through the Office of W6QM Micc-Ft Drum and is classified under NAICS code 336214 for motor vehicle body manufacturing. The solicitation was posted on August 6, 2026, with a response deadline of August 12, 2026, and is a combined solicitation open to eligible contractors. The primary point of contact is Andre Bishop, reachable at 580-714-9525 or andre.r.bishop.civ@army.mil, and the contract is intended for performance at a location with zip code 73503, though the exact city and state are not specified. The trailer is a turnkey solution designed for immediate operational deployment, with all systems fully installed, tested, and integrated by the builder, ensuring readiness for mission-critical command, control, and communications applications in austere or

Travel Trailer and Camper Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # W911S226U3898

The contract solicitation titled STEEL BAR under solicitation number W911S226U3898 is a combined action issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is designated as a Small Business Set Aside - Total, meaning only small businesses are eligible to compete, and it falls under NAICS code 331110 which corresponds to Steel Mill and Steel Product Manufacturing. The solicitation was posted on August 10, 2026, with a response deadline of August 17, 2026, at 9:00 PM Eastern Time. The primary point of contact for inquiries is Cindy Jepsen, reachable via email at cindy.k.jepsen.civ@army.mil or phone at 309-782-8389. The place of performance is listed with a zip code of 61299, though specific city and state details are not provided. This solicitation specifically updates the length of the steel bar and the quantity requested, indicating prior requirements have been modified to reflect current procurement needs.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # W911S226U3980

The contract specifies the procurement of a Bobcat Toolcat UW56 or an equal model featuring a 61-horsepower turbo diesel engine and an operating weight between 5,800 and 6,000 pounds. It requires a fully hydrostatic transmission with high and low range, a top speed of 18 miles per hour, full-time all-wheel drive with limited slip differentials, and an all-wheel steer system. The machine must include a fully enclosed ROPS and FOPS certified cab with heating and air conditioning, sound reduction features, front windshield wipers, an AM/FM radio with weather band, a backup camera, horn, exterior side mirrors, and a keyless start system. Operational and safety requirements include 4-wheel independent suspension, 27x10.5-15 8-ply deep lug tires, a backup alarm, warning beacon, front and rear work lights, road lighting, and a minimum 20-gallon fuel capacity. The hydraulic system must deliver auxiliary hydraulics at 18 gallons per minute and high-flow hydraulics at 27 gallons per minute, with pressure-relieved remotes and a 7-pin electric attachment kit. Joystick controls, a skid steer-style coupler, and a hydraulic quick-change system are mandatory. Equipment must include a 62-inch dirt bucket with a steel bolt-on cutting edge and side cutters, a 72-inch front-mount 2-stage snowblower compatible with high-flow hydraulics, a hydraulic dump box rated for a 2,000-pound lift capacity, and a 2-inch receiver trailer hitch. The delivery must include all operational and service manuals, a scannable unique identification label, on-site operator training, and delivery to Fort Drum, New York. This is a Small Business Set Aside solicitation under NAICS code 339999, issued by the Department of Defense, with bids due by August 14, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # W911S226U3990

The U.S. Department of Defense, through the Office of W6QM Micc-Ft Drum, is seeking qualified small businesses to supply an Oil Filter Crusher under a combined solicitation with the number W911S226U3990. This opportunity is exclusively reserved for small businesses under the SBA Small Business Set Aside - Total category, with the NAICS code 333618 indicating the contract falls under Other Commercial and Service Industry Machinery Manufacturing. The solicitation was posted on August 10, 2026, and responses are due by August 17, 2026, at 3:00 PM Eastern Time. The place of performance is listed with a zip code of 76544, though no specific city or state is provided. The primary point of contact for inquiries is Rachel Rosenbaum, reachable by phone at 254-287-0304 or email at rachel.r.rosenbaum.civ@army.mil. The contract’s official details and submission portal can be accessed via the SAM.gov link associated with the opportunity.

Other Engine Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # W911S226U4003

The contract titled Overhead Doors, identified by solicitation number W911S226U4003, is issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is a combined solicitation with a North American Industry Classification System code of 332321, indicating it pertains to the manufacture of overhead doors. The solicitation was posted on August 10, 2026, and responses are due by August 17, 2026, with no set-aside designation specified. The place of performance is listed with a zip code of 74501, though no specific city or state is provided for the delivery location. Primary point of contact for inquiries is Mike Fabry, reachable via email at mike.j.fabry.civ@army.mil or by phone at 918-420-6580. All proposals must be submitted through the SAM.gov portal linked in the solicitation.

Metal Window and Door Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # W911S226U3965

The contract involves the procurement of GEM electric passenger vehicles with a seating capacity of six, specifically amended to update the NAICS code to 336999, which classifies it under other transportation equipment manufacturing. The solicitation number is W911S226U3965, posted on August 10, 2026, with a response deadline of August 14, 2026, at 10:00 PM Eastern Time. This is a combined solicitation under a Small Business Set Aside, fully reserved for small businesses, as administered by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a zip code of 13602-5220. The place of performance is indicated with a zip code of 10996, though the specific city and state are not provided. The primary point of contact is Paul Maxwell, reachable via email at paul.maxwell@westpoint.edu or by phone at 845-938-2845, and the full details can be accessed through the SAM.gov workspace link provided.

All Other Transportation Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Trailer Lite Check Tool

Solicitation # W911S226U4010

The Trailer Lite Check Tool solicitation, identified by number W911S226U4010, is a combined contract opportunity issued by the Department of Defense through the Office at Fort Drum, New York, with a NAICS code of 339999 indicating it falls under Other Miscellaneous Manufacturing. This procurement is exclusively reserved for small businesses as a total small business set aside, ensuring only eligible small entities can compete. The solicitation was posted on August 10, 2026, with a strict response deadline of August 17, 2026, at 5:10 p.m. Eastern Time, requiring all proposals to be submitted before then to be considered. The place of performance is listed with a zip code of 54656, though the specific city and state are not provided, suggesting delivery or performance may occur at a location within that zip region. Troy Boardman serves as the primary point of contact, reachable via email at troy.a.boardman.civ@army.mil or by phone at 502-898-0312, and is the designated individual for inquiries related to the requirement. The full solicitation details can be accessed through the official SAM.gov portal using the provided UI link.

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # W911S226U4002

The contract titled Overhead Door, identified by solicitation number W911S226U4002, is a small business set aside under the SBA program, specifically reserved entirely for small businesses. It is classified under NAICS code 332321, which corresponds to the manufacturing of metal doors and windows, indicating the procurement involves overhead door systems likely for military or government facilities. The opportunity was posted on August 10, 2026, with a firm response deadline of August 17, 2026, and is structured as a combined solicitation, suggesting it may integrate requirements from multiple procurement methods or funding sources. The contracting activity is managed by the Department of Defense through the W6QM Micc-Ft Drum office located at Fort Drum, New York, with a place of performance referenced by ZIP code 74501, which corresponds to Tinker Air Force Base in Oklahoma, implying the doors may be required for installations or infrastructure in that region. Primary point of contact for inquiries is Mike Fabry, reachable via phone at 918-420-6580 or email at mike.j.fabry.civ@army.mil, and further details can be accessed through the SAM.gov platform using the provided UI link.

Metal Window and Door Manufacturing

POSTED

about 21 hours ago

DEADLINE

Hilti threaded anchor bolts and epoxy

Solicitation # W911S226U4001

The contract solicitation W911S226U4001 seeks Hilti threaded anchor bolts and epoxy products under a Small Business Set Aside for total participation, as defined by the SBA, with the NAICS code 332722 indicating a focus on structural metal fabrication. Issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, the opportunity is open to small businesses and requires responses by August 17, 2026, with the solicitation posted on August 10, 2026. The place of performance is listed with a zip code of 74501, suggesting delivery or installation may occur at a specific military installation or facility in that region. Mike Fabry serves as the primary point of contact, reachable via email and phone for inquiries regarding specifications, requirements, or submission procedures. The combined nature of the solicitation indicates the contract may include both procurement and potential service elements related to the installation or application of the specified anchors and epoxy systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # W911S226U3986

The contract is for baseball caps under solicitation number W911S26U3986, with a response deadline of August 14, 2026, at 8:15 PM Eastern Time, and was posted on August 10, 2026. It is a combined solicitation reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 315990 indicating apparel accessories manufacturing. The awarding organization is the Department of Defense, specifically the Office W6QM Micc-Ft Drum located at Fort Drum, New York, 13602-5220, and the point of contact is Shirley Link, reachable via email at shirley.link.civ@army.mil or phone at 334-255-0985. The place of performance is identified with a zip code of 36362, though no specific city or state is provided. The contract duration has been amended to allow a seven-day timeframe for fulfillment.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 21 hours ago

DEADLINE

Wireless Column Lifts

Solicitation # W911S226U4009

The contract for Wireless Column Lifts under solicitation number W911S26U4009 is a Small Business Set Aside targeting small businesses for the procurement of specialized lifting equipment. Issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, the opportunity is classified under NAICS code 333517, which pertains to other engine equipment manufacturing. The solicitation was posted on August 10, 2026, with a firm response deadline of August 17, 2026, at 6:05 p.m. Eastern Time, and is structured as a combined solicitation indicating it may include both solicitation and award actions. The place of performance is designated with a ZIP code of 54656, though the specific city and state are not provided. Troy Boardman serves as the primary point of contact, reachable via email or phone, for inquiries and submissions related to this procurement. The full solicitation details and submission portal can be accessed through the SAM.gov workspace link provided.

Machine Tool Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # W911S226U3994

The contract seeks dining room furniture under solicitation number W911S26U3994, issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a postal code of 13602-5220. The opportunity is posted as a combined solicitation with a response deadline of August 17, 2026, at 8:35 PM Eastern Time. The North American Industry Classification System code 423210 identifies the procurement as related to furniture merchant wholesalers. The place of performance is designated with a zip code of 73503, indicating delivery or installation may occur in Oklahoma. David Green is listed as the primary point of contact, reachable via email at david.e.green.civ@army.mil or by phone at 580-442-1896. No specific set-aside type is assigned, meaning the procurement is open to all eligible vendors without restriction based on small business, veteran-owned, or other socioeconomic categories. The contract opportunity can be accessed through the SAM.gov portal using the provided UI link.

Furniture Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE