This Government Contract opportunity from Department Of Defense was posted on August 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Ultra-Narrow Electric Slab Scissor Lift Supply (Option)

Closed

Federal

Submission Closed08/28/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333120

New

Federal

NSN 5130015669115; HAMMER, HYDRAULIC, MOUNTED

Solicitation # 47QSSC26Q9115

The General Services Administration is soliciting quotes for the procurement of two brand name hydraulic hammer attachment kits, NSN 5130015669115, designed for the Case M400T compact track loader. These units must feature the CH300 Hammer Body and correspond to Case part number 47450998. This is a brand name only procurement, and no substitutions will be accepted. The award will be granted to the responsible offeror who meets all administrative compliance requirements and provides the lowest evaluated price. To be considered valid, quotes must include the completed Request for Quote document and the MIL STD 129R certification submitted via email to the primary point of contact. Delivery is specified as FOB Destination, CONUS, with a shipping destination in Bastrop, Louisiana. All items must be permanently marked with the manufacturer's part number, name or symbol, and country of origin. Packaging and marking must comply with MIL-STD-129R, Federal Standard 123, or ASTM D-3951. The acquisition is subject to the Buy American Act and GSA Class Deviation RFO-2025-25.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Solicitation # 2140229

The New York Power Authority is soliciting proposals under solicitation number 2140229 for the procurement of a JLG lift to be used at the Clark Energy Center in Marcy, New York. The contract, identified by number C26-10390686JK, has a performance term of one year. Interested bidders must submit their proposals through the Ariba event portal by the deadline of November 17, 2026, at 4:00 PM. Instructions for participating in the bidding process are available on the official New York Power Authority website. The primary point of contact for this procurement is Site Buyer Jaimie Kinville. While the specific contract value and evaluation factors are not detailed in the provided documentation, the scope of work is centered on the delivery of the lift equipment to the Marcy facility. It is noted that Skyworks LLC has been awarded an identical or substantially similar procurement contract within the last five years.

Power Authority of New York

POSTED

DEADLINE

MMO T-LINES PURCHASE TWO NEW BOBCAT SKIDSTEEERS UNITS, EO 14398The Western Area Power Administration, under the Department of Energy, has issued a forecast for the purchase of two new Bobcat skidsteer units under EO 14398. This procurement falls under NAICS code 333120 and is associated with the MMO T-Lines project. The current incumbent contractor for this equipment is American Material Handling, Inc. Interested parties can coordinate with the Small Business Program Managers, Tetrault and Teves, regarding this upcoming acquisition.

Western Area Power Administration

POSTED

DEADLINE

Portable Asphalt Recycling Machine SupplierThis subcontract agreement involves the procurement of a portable asphalt recycling machine to support prime contractors working on Texas Department of Transportation projects within the Waco District. The selected supplier is responsible for the manufacturing and sourcing of a machine that strictly adheres to all TxDOT technical specifications, ensuring the equipment is capable of meeting the operational demands of the district. To be eligible for this contract, suppliers must be registered on the Texas Comptroller of Public Accounts Centralized Master Bidders List. The scope of work concludes with the successful delivery of one portable asphalt recycling machine to a designated location within the Waco District. The solicitation was posted on October 23, 2026, with a response deadline of November 13, 2026.

Texas Department of Transportation

POSTED

DEADLINE

Portable Asphalt Recycling Machine for TxDOT Waco District

Solicitation # 601310000102818

The Texas Department of Transportation is soliciting bids for the procurement of one Portable Asphalt Recycling Machine for the Waco District. The required equipment must feature a Cummins Tier 4 Final diesel engine rated at 260 horsepower, a maximum cutting width of 48 inches, and a maximum cutting depth of 12 inches. In addition to the primary machine, the solicitation includes several mandatory bid options: a Piranha Top-Hatch Adjustable Breaker Bar, Accu-Trak Wheel Assist with Power Steering, a custom Wheel Assist Trailer with a 3-inch pintle hitch, and a WA150 Wheel Assist Mount Water Supply System. The successful vendor must provide a minimum of four hours of operator and maintenance training upon delivery, along with a complete set of manufacturer manuals. Eligible respondents must be authorized dealers who have been engaged in manufacturing or supplying portable asphalt recycling machines for at least three of the last five years. Bids must be submitted via the Euna Procurement portal by November 13, 2026, at 3:00 p.m. Central Time. The evaluation process is a two-stage best-value determination; vendors must first pass a documentation review and maintain a CPA Vendor Performance rating of A, B, or C before being evaluated on purchase price, technical compliance, delivery timeframes, warranties, and the risk of non-performance. All goods must be shipped FOB Destination to Waco, Texas, in first-class condition and must meet all applicable Federal and State of Texas safety and noise regulations.

Texas Department of Transportation

POSTED

DEADLINE

Sealed bids Will be received by the Board of Supervisors 0fDeS0t0 County, Mississippi, until a.m. on Thursday, October 29, 2026, at the Onice of Procurement, 365 Losher Street, Suite 320, Hernando, Mississippi, for the Puturase of One or More 12,000 Pound

Solicitation # 27-300-005

The Board of Supervisors of DeSoto County, Mississippi, has issued solicitation number 27-300-005 for the purchase of one or more 12,000 pound compact track loaders, also known as skid steers. This procurement falls under product category 07203 for Class 3 trucks with a gross vehicle weight rating between 10,001 and 14,000 pounds. Detailed specifications for the equipment are available through the Office of Procurement in Hernando, Mississippi, the official county procurement website, or via Central Bidding. Sealed bids must be submitted by 11:00 a.m. on Thursday, October 29, 2026. Submissions can be delivered physically to the Office of Procurement at 365 Losher Street, Suite 320, Hernando, Mississippi, or submitted electronically through Central Bidding. Physical envelopes must be sealed and clearly labeled with the contractor's company name on the outside. For inquiries regarding this solicitation, the point of contact is Vickie Tillman, and the contracting official is Misty Heffner, Chancery Clerk for the DeSoto County Board of Supervisors.

POSTED

DEADLINE

J061--Thompson Power Generator Service RFI Intent to Sole Source

Solicitation # 36C24927Q0025

The Department of Veterans Affairs intends to award a sole-source, firm-fixed price contract to Thompson Machinery Commerce Corporation for recurring full-service maintenance and rebuilds of the Caterpillar G3520C generator set and associated radiator system at the Alvin C. York Campus. This procurement, conducted under FAR 12.102-1(b) and NAICS code 333120, is justified by the proprietary nature of Caterpillar engine control software and the fact that Thompson Machinery is the only factory-authorized source for sales, service, and parts in the designated region. The contract is designed to ensure the continuous operation of the natural gas-fueled engine, which provides primary electrical power and steam to the facility. The scope of work requires manufacturer-certified technicians to perform maintenance according to service manual SEBU7681-16, including battery replacements every 24 months, radiator cleaning and fluid inspections every 1,000 hours, and comprehensive coolant and hose replacements every five years. Major deliverables include a standard top end overhaul every 18,000 service hours and a full out-of-frame overhaul during the fifth year of the contract. The estimated period of performance spans five ordering periods from December 1, 2026, through November 30, 2031. While this is an intent to sole source, the government will evaluate any interested parties who submit capability statements by October 30, 2026, to determine if the requirement should be competed.

249-NETWORK Contract Office 9 (36C249)

POSTED

DEADLINE

Mechanic Crane Truck (LCB)The Bureau of Reclamation, under the Department of the Interior, is forecasting the purchase of two mechanic crane trucks to support the Yuma Area Office within the Lower Colorado Basin. This procurement falls under NAICS code 333120 and is intended to provide essential equipment for operations based in Yuma. The forecast was posted on October 22, 2026, and lists Melissa Trotter as both the primary point of contact and the Small Business Specialist. Interested parties can find further details through the Acquisition Gateway portal.

Bureau of Reclamation

POSTED

DEADLINE

YAO Overhead Crane (LCB)The Bureau of Reclamation, under the Department of the Interior, is forecasting the purchase of an overhead crane for the Yuma Area Office Carpenter Shop located in the Lower Colorado Basin. This procurement is categorized under NAICS code 333120 and is intended for performance in Yuma. The opportunity was posted on October 22, 2026, and is currently listed as a forecast. Melissa Trotter serves as both the primary point of contact and the Small Business Specialist for this requirement.

Bureau of Reclamation

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0329

Solicitation SPE7M2-27-T-0329, issued by the DLA Weapons Support Nuclear Reactor Program on October 23, 2026, is a fixed-price procurement for three units of Cable Pulling Guides (NSN 3895013410132). The requirement is not a small business set-aside and falls under NAICS code 333120. The need ship date is April 20, 2027, with an original required delivery date of July 19, 2027. Delivery is established as FOB Destination, utilizing the First Destination Transportation program for government-arranged transport to the DLA Distribution New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies that items must meet NAVAIR aircraft launch and recovery equipment traceability standards. Packaging must comply with MIL-STD-2073-1E and RP001, while shipment marking must follow MIL-STD-129. Bare items must be marked with the contract number, NAWC CAGE, and part number. Additionally, the contract prohibits the intentional addition of mercury and requires compliance with the Buy American Act and Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # 2026-15-RFB

Miami County, Kansas, through its Road and Bridge Highway Department, is soliciting bids under solicitation number 2026-15-RFB for the procurement of a new Compact Track Loader. The equipment must be built for the U.S. market, sold by a factory authorized dealer, and delivered in ready-to-use condition to the department in Paola, Kansas. Key deliverables include two operator manuals, parts and shop service manuals, a model brochure with detailed specifications, one complete set of filters, and a minimum two-year full warranty. Bidders are required to provide a demonstrator before the bid opening and must submit an itemized quote covering base specifications, delivery, and any additional options. The contract will be effective for approximately twelve months from the notice of award, with deliveries scheduled Monday through Friday between 7:00 a.m. and 3:00 p.m. CST, requiring 24 hours prior notification. Award determinations will consider cost, technical requirements, and discounts for prompt payment. The successful contractor may be required to provide performance and statutory bonds equal to 100 percent of the contract sum. All terms are governed by the laws of the State of Kansas and the District Court of Miami County, with specific compliance required for the Kansas Act Against Discrimination and the Americans with Disabilities Act. Payments are made in arrears via procurement card, check, or electronic transfer, subject to the Kansas Cash Basis Law.

Road & Bridge - Highway Department

POSTED

DEADLINE

Copy of T8080-260066 Transport Canada Churchill Airport Electric Compact Loader

Solicitation # WS5765821402

Transport Canada is seeking the procurement of one electric powered compact loader for use at Churchill Airport. The primary objective of this acquisition is to evaluate the equipment's battery performance, charging compatibility, and overall reliability in cold weather environments. The loader will be utilized year-round for both airside and groundside maintenance tasks, including seasonal sweeping, sanding, and snow removal, to gather comprehensive performance data across all seasons. This solicitation, numbered WS5765821402, is managed by the Department of Public Works and Government Services for the Government of Canada. Interested parties must submit their responses by October 30, 2026. The contract falls under NAICS code 333120, with the place of performance located in Churchill, Canada. Lisa Harris serves as the primary contracting authority for this requirement.

Department of Public Works and Government Services

POSTED

5 days ago

DEADLINE

in 4 days

AI Contract Overview

This subcontract opportunity involves the supply and delivery of one brand-new, ultra-narrow electric slab scissor lift to Beale AFB. The equipment must feature a minimum platform height of 19 feet and be specifically designed for indoor use while meeting all required safety and operational specifications. The contract is issued by the Department of Defense under the agency FA4686 9 Cons Pk and is designated as a total Small Business Set Aside. Interested parties must respond by August 28, 2026, with the project falling under NAICS code 333120. Performance will take place in the 95903 zip code area.

General Info

Supply one 19ft electric slab scissor lift to Beale AFB by August 28, 2026.

Agency

Department Of Defense → FA4686 9 Cons Pk

NAICS

333120 - Construction Machinery Manufacturing

Place of Performance

0, CA, 95903, USA

Set-Aside

SBA

Documents

This scope was carved out of FA468626QC010.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Boom Lift and Scissor Lifts

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 25

subcontract

Response DeadlineAug 28

Deadline has passed

Submission Closed

08/28/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA4686 9 Cons Pk

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA4686 9 Cons Pk

Office AddressN/A

ContactsNo contact information available

Full Description

Supply and delivery of one brand-new, ultra-narrow electric slab scissor lift with a minimum 19-foot platform height, suitable for indoor use and compliant with safety and operational specifications, to Beale AFB.