This Government Contract opportunity from Government of Canada was posted on April 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Crane Integration and Vehicle Customization

Closed

International

Submission Closed05/20/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333921

New

SLED

Automated Sample Exchange and Positioning System

Florida State University

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3822

The contract pertains to the procurement of 35 units of SLAVE PLUG with NSN 3431-01-576-8427 under solicitation SPE8E5-26-T-3822, issued by DLA Dist San Joaquin under the Department of Defense. Each unit is priced at $35.00 with a total contract value of $1,225.00, and delivery is required within 167 days from the award date, with an original required delivery date of November 18, 2026, and a needed ship date of February 1, 2027. Items are to be delivered FOB origin with no variance allowed in quantity, inspected and accepted at destination, and must comply with all DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging must adhere to MIL-STD-129 specifications and be palletized per RP001: DLA Packaging Requirements for Procurement. All items must be labeled and marked in accordance with the defined standards, and units of issue are strictly as specified. The designated delivery point is the DLA Distribution San Joaquin warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000, with transportation instructions governed by DLAD Proc Notes C19 and C20. The contract reference includes strict compliance with covered defense information protocols and incorporates technical requirements referenced by R or I numbers from the official DLA Master List. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and primary point of contact is Amanda Bird at DLA.

POSTED

DEADLINE

Filtration and Particulate Removal ModuleThe contract seeks the supply of high-efficiency mechanical and adsorbent filtration modules designed to remove particulates, acids, and sludge from transformer oil, ensuring compatibility with field maintenance protocols and featuring replaceable cartridges for operational continuity. These modules must meet rigorous performance standards to preserve transformer integrity and extend service life under demanding conditions, with an emphasis on ease of integration and reliability during routine servicing. The procurement is structured as a subcontract under the SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside, specifically targeting businesses certified under the WOSB Program as outlined in FAR 19.15, and falls under NAICS code 333921 for other commercial and service industry machinery manufacturing. The opportunity was posted on August 5, 2026, with a response deadline of August 11, 2026, at 9:00 PM Eastern Time, and is managed by the Grand Coulee Power Office under the U.S. Department of the Interior. While specific location details for performance or delivery are not provided, the modules are intended for use in field environments where transformer maintenance is conducted, requiring systems that are durable, scalable, and suitable for remote or off-grid applications. All proposals must align with the WOSB set-aside requirements, ensuring only eligible women-owned small businesses can respond, and submissions must be complete and compliant with federal contracting guidelines to be considered.

Grand Coulee Power Office

POSTED

DEADLINE

Ultra High Pressure Fire Skid Units SupplyThe contract calls for the supply of four fully assembled ultra high pressure fire skid units designed specifically for military firefighting operations, with all units required to meet detailed technical specifications and salient characteristics to ensure operational readiness and performance under demanding conditions. These units are intended for deployment in high-risk environments where rapid, high-pressure water delivery is critical to extinguishing fires and protecting personnel and infrastructure. The requirement is structured as a subcontract under a Small Business Set Aside – Total designation, ensuring eligibility and preference for qualified small businesses, and is classified under NAICS code 333921 which corresponds to other commercial and service industry machinery manufacturing. The performance location is specified as Colorado Springs, Colorado with a zip code of 80913, indicating the units will be delivered directly to a Department of Defense installation managed by W6QM Micc-Ft Carson. The solicitation was posted on August 5, 2026, and responses are due no later than August 7, 2026, at 6:00 p.m., providing a narrow window for submission and evaluation.

POSTED

DEADLINE

MPA-534 Elevator Service and Repairs

Solicitation # OEV27006887

The State of Rhode Island is seeking qualified vendors for MPA-534 to provide comprehensive service, repair, and maintenance for elevators, escalators, and other vertical transportation equipment across state facilities. This open enrollment contract allows for routine monthly inspections, emergency response, and potential new installations if determined appropriate by the Division of Purchases. Vendors must adhere to strict performance standards, including monthly preventive maintenance involving lubrication, cleaning, and inspection of critical components such as motors, brakes, door operators, and safety systems. Emergency response timelines are strictly enforced: one hour during business hours, two hours outside business hours, twenty minutes for passenger entrapments, and thirty minutes to assist individuals with disabilities. All work must comply with Rhode Island General Laws Chapter 23-33 and the ASME A17.1 National Elevator Code, with mandatory annual testing of car safety and speed governor devices, three-year full load tests for hydraulic elevators, and five-year tests for cable elevators, all conducted in the presence of a state inspector at no additional cost to the state. Vendors must maintain a local parts warehouse for emergency delivery, comply with FOB terms for parts delivery without shipping charges, and submit detailed service reports after each inspection to building managers. Invoicing is structured around fixed monthly rates per unit that include all required testing, with time-and-materials billing permitted only for unauthorized damage incidents, subject to strict documentation requirements including time sheets, service logs, and verification by state personnel. Hourly billing is restricted to time spent on-site, rounded to the nearest half-hour, with no minimum or travel charges allowed. Vendors must also comply with prevailing wage requirements under RIGL 37-13-1 et seq., paying employees weekly, posting wage rates on-site, submitting certified weekly payroll forms monthly, and ensuring all workers on projects over $100,000 hold OSHA 10-hour certifications. All bidders must submit a Conflict of Interest Attestation confirming no participation in the solicitation’s development and no conflicts under Chapter 14 of Title 36. Proposal evaluation is a strict pass/fail process; failure on any single criterion results in automatic disqualification. Bidders are required to quote all hourly rates and charges as specified, and must review and certify understanding of the state’s Contract Addendum regarding prevailing wages and other obligations. The solicitation window opens August 3, 2026, with responses due by August 1, 2028

State of Rhode Island

POSTED

DEADLINE

Escalator Modernization

Solicitation # PE-92200-RFP-2027-000000090

The Georgia World Congress Center Authority is soliciting proposals for the modernization of escalators at its facilities in Georgia, under solicitation number PE-92200-RFP-2027-000000090, with responses due by August 27, 2026. The Authority maintains full discretion to reject any or all submissions, waive procedural irregularities, or cancel the procurement at any time without notice. A strict communication restriction is in place from the date of advertisement until final award: no discussions about the scope or solicitation are permitted with any Authority staff, representatives, or consultants except through formal channels outlined in the request for qualification, and all inquiries must be submitted as directed. Finalists and apparent awardees are prohibited from issuing public statements or press releases regarding their status in the process, and violations will result in disqualification. The primary point of contact for the solicitation is Erle Coleman, reachable via email or phone provided in the posting.

Georgia World Congress Center Authority

POSTED

DEADLINE

Solicitation # W50S8A26QA023

This solicitation, numbered W50S8A26QA023, is a full small business set-aside under the NAICS code 333921 for Elevator and Moving Stairway Manufacturing, with a size standard of 1,000 employees, and is open only to qualified small businesses. It seeks a 10,000-pound capacity two-post vehicle lift and its professional installation, to be delivered and set up at 302 Newmarket Street, Newington, New Hampshire, under Free On Board (FOB) Destination terms. The government will award a Firm-Fixed Price contract based on quotes submitted by 4:00 PM Eastern Time on July 31, 2026, with all quotes required to remain valid for 60 days. Registration in the System for Award Management (SAM) must be active at the time of award, and only properly submitted responses conforming to the instructions in FAR 52.212-1 will be considered. Technical and contractual inquiries must be sent in writing via email to the designated point of contact by noon EST on July 23, 2026, and must include the solicitation number, the submitter’s legal name, and the nature of the inquiry; telephone calls will not be accepted. The required lift must be capable of lifting vehicles up to 10,000 pounds and raise them six feet off the ground, operate on 208–230V power, feature a single cylinder per column with a width between posts of up to 10 feet, and include both automatic mechanical and hydraulic safety systems. The installation CLIN covers the complete setup and commissioning of the equipment. Evaluation of quotes will follow the factors outlined in FAR 52.212-2, and any modifications to the solicitation will be issued as amendments if responses to questions affect the requirements. All terms, conditions, provisions, and clauses are governed by Federal Acquisition Circular 2026-01, and complete details are contained in the accompanying Provisions and Clauses document. Failure to comply with submission, SAM registration, or inquiry requirements will disqualify a response.

W7NN Uspfo Activity Nhang 157

POSTED

DEADLINE

Precision Manufacturing and Assembly of Hydraulic Lift SystemThe contract calls for the fabrication, machining, and final assembly of a hydraulic lift system adhering strictly to OEM specifications and Department of Defense technical requirements, with full compliance to military quality and performance standards. All work must include rigorous quality control measures throughout the manufacturing process to ensure conformance with applicable defense regulations and operational reliability under demanding conditions. The project is designated as a total small business set-aside under the SBA program, exclusively available to small business concern entities as defined under FAR 19.5, and falls under the NAICS code 333921 for other commercial and service machinery manufacturing. Performance of the contract is required to be conducted at Fort Stewart, Georgia, with a response deadline of August 10, 2026, following a public posting date of July 30, 2026. The contracting agency is the Department of Defense under its Construction & Equipment Manu & Con division, and while no specific point of contact is listed, all submissions must be directed through the designated DIBBS platform. The scope encompasses end-to-end production including inspection, testing, and documentation to meet federal military procurement standards, with no tolerance for deviation from approved technical data or quality assurance protocols.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Elevator & Escalator Maintenance US Consulate General Guadalajara

Solicitation # 19MX3026Q0008

The U.S. Consulate General in Guadalajara is seeking maintenance services for its elevators and escalators under solicitation number 19MX3026Q0008, with a NAICS code of 333921. Proposals must be submitted by August 11, 2026, at 12:00 p.m. local time in Guadalajara, and only English-language submissions will be considered; incomplete proposals will be rejected. Questions regarding the solicitation must be submitted no later than August 4, 2026, at 12:00 p.m. local time, and no inquiries will be accepted after this deadline. The contract will be awarded to the responsible offeror submitting the lowest technically acceptable quotation, with the government reserving the right to conduct discussions if necessary, though no discussions are anticipated at this stage. The work will be performed at the U.S. Consulate General in Guadalajara, Jalisco, Mexico, and solicitations must be submitted via email to GdlGSOProcurement@state.gov, the designated point of contact. The solicitation was posted on July 30, 2026, and the award is expected to be made based solely on initial submissions unless further clarification is required. All proposals must originate from companies capable of meeting technical requirements with competitive pricing, and failure to comply with formatting, language, or submission deadlines will result in disqualification. The contracting office is located in Washington, D.C., under the Department of State, with no set-aside type designated for this procurement.

American Consulate Guadalajara

POSTED

DEADLINE

Ladder System Supply – Dual-Side Rail Ladders with WinchesThe contract solicits the supply of dual-side rail ladder systems equipped with manual winches for safe roof access, designed to fully comply with OSHA and IBC fall protection and structural standards. These systems are intended to provide reliable, code-compliant access for maintenance and emergency personnel at the U.S. Embassy in Riga, Latvia, with the place of performance confirmed as LV-1510. The equipment must meet rigorous safety and engineering specifications to ensure durability and operational integrity under environmental and usage conditions typical of the region. This subcontract opportunity was posted on July 28, 2026, with a response deadline of August 12, 2026, at 11:00 a.m. The North American Industry Classification System code 333921 applies, indicating it relates to other commercial and service machinery manufacturing, consistent with the fabrication and supply of specialized access equipment. The solicitation is managed by the U.S. Department of State through the U.S. Embassy in Riga, and all proposals must align with federal procurement requirements, though no specific set-aside status is designated. Bidders are expected to demonstrate compliance with all technical, safety, and delivery obligations without reliance on external documentation beyond the stated standards.

POSTED

DEADLINE

Supply of Gas-Powered Water Jetter (2”–10” pipes)The contract involves the supply of a gas-powered water jetting system designed for heavy-duty cleaning of pipes ranging from 2 inches to 10 inches in diameter. This equipment must meet the operational demands of industrial-scale pipe maintenance and cleaning, ensuring high-pressure performance suitable for challenging debris and blockages. The system is intended for use by the U.S. Embassy in Mexico under the Department of State, with all performance activities centered in Mexico. Local maintenance and technical support must be readily available to ensure continuous operation, minimizing downtime and requiring a responsive service presence within the country. The contract falls under NAICS code 333921, indicating it is classified within the industrial machinery manufacturing sector, and is structured as a subcontract. The posting date is listed as July 28, 2026, which suggests this is a future procurement opportunity, though no solicitation number is provided and specific point of contact details are omitted. Delivery and service obligations are tied exclusively to the operational environment in Mexico.

POSTED

DEADLINE

Supply of Corded Water Jetter (1 1/4”–4” pipes)The contract entails the supply of a new corded water jetting system designed for cleaning drain pipes ranging from 1.25 inches to 4 inches in diameter. The equipment must be fully functional and backed by a comprehensive warranty ensuring reliability and performance over time. Local technical support is required to guarantee prompt service, maintenance, and troubleshooting within the designated area of performance. The system is intended for use by the U.S. Embassy in Mexico under the Department of State, with all deliveries and support activities focused in Mexico City. The procurement falls under NAICS code 333921, indicating it is for industrial machinery and equipment manufacturing, and is structured as a subcontract arrangement. The solicitation was posted on July 28, 2026, and while specific delivery timelines and performance metrics are not detailed, the requirement emphasizes operational readiness and sustained local assistance to meet the embassy’s sanitation and infrastructure maintenance needs.

US Embassy Mexico

POSTED

10 days ago

DEADLINE

N/A

AI Contract Overview

The contract involves the integration of 5-ton hydraulic cranes onto truck chassis, which encompasses several critical tasks such as structural reinforcement of the vehicle, installation of hydraulic systems, setup of control panels, and obtaining safety certifications to ensure full compliance and part interchangeability. This comprehensive customization ensures that the crane and vehicle work seamlessly together while adhering to safety and operational standards. The work is to be performed in New Brunswick and Quebec (excluding the National Capital Region) and is issued by the Department of National Defence under the Government of Canada. This subcontract opportunity, identified under NAICS code 333921, is designed to address specialized manufacturing and integration services related to cranes and hydraulic lifting equipment. The solicitation was posted on April 9, 2026, with responses due by May 20, 2026. The project highlights the need for advanced technical expertise in hydraulic systems, vehicle structural modifications, and compliance certification, reflecting the government’s commitment to reliable and standardized equipment performance in its fleet operations.

General Info

Integration of 5-ton hydraulic cranes on trucks with structural, hydraulic, control setup, safety certifications.

Agency

Government of Canada → Department of National Defence

NAICS

333921 - Elevator and Moving Stairway ManufacturingView NAICS

Place of Performance

New Brunswick, Quebec (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 9

subcontract

Response DeadlineMay 20

Deadline has passed

Submission Closed

05/20/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Integration of 5-ton hydraulic cranes onto truck chassis, including structural reinforcement, hydraulic system installation, control panel setup, and safety certification to ensure parts interchangeability.