Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CULTURE MEDIUM, GRAM NE

Active
SPE2DS-26-T-325RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of Gram Negative Broth culture medium in liquid form, 8 mL per unit, requiring refrigeration between 2 to 8 degrees Celsius. Each purchase group (PG) contains 100 units, and the item has a non-extendable shelf life of nine months under RS001 requirements for Type I (Code G) items. The product is regulated by the FDA, and bidders must provide the source and part number being offered, with Cardinal Health and Becton, Dickinson and Company listed as potential manufacturers. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies are available through DLA Troop Support. The material must be packaged in commercial-grade sealed unit containers and shipped in protective exterior containers suitable for safe delivery by common carriers at the lowest cost. Delivery is FOB destination within 20 days of ordering, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The NSN is 6550-01-231-7217, and the solicitation number is SPE2DS-26-T-325R, with a response deadline of August 17, 2026, and an original required delivery date of August 11, 2026. The contract references applicable DLA technical and quality requirements and includes special provisions for hazardous material handling, government identification removal, and covered defense information. The point of contact for the solicitation is Kendall Jones of the Department of Defense’s Medical Supply Chain MD Surg FSF.

General Info

Procure 8 mL Gram Negative Broth, refrigerated, 100 units per PG, FDA-regulated, FOB destination, NSN 6550-01-231-7217, delivery by Aug 11, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

621410 - Family Planning CentersView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DS-26-T-325R Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Kendall Jones
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CULTURE MEDIUM,GRAM NEGATIVE BROTH
CULTURE MEDIUM, GRAM NEGATIVE BROTH
LIQUID, 8 ML
.
REQUIRES REFRIGERATION BETWEEN 2 TO
8 DEGREES C
.
1 PG = 100 EA
RS009: Shelf-life requirement RS001 for a TYPE I (CODE G) item with a shelf life of 9 months (non-extendable) applies to this item. . RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES . BIDDER SHALL SPECIFY SOURCE AND PART NUMBER BEING SUPPLIED. . This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CARDINAL HEALTH 200, LLC 07TA6 P/N 4321730 BECTON, DICKINSON AND COMPANY 22790 P/N 221730
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE2DS-26-T-325R
SECTION B
PR: 7017790214 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017790214 0001 PG 1.000
NSN/MATERIAL:6550012317217
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
FM5288
FM5288 51 MED COBLOG DET 1 OLA SGSL
BLDG 1006 CP 011 051 979 4080
GONGHANG JINIP RO 42 ST #54
SPE2DS-26-T-325R
SECTION B
PR: 7017790214 PRLI: 0001 CONT’D
BUSAN 46718
KR
MEDICAL AIR BRIDGE WEST. FOR ELIGIBLE ITEMS: SD0379. CARDINAL HEALTH, 4551 EAST PHILADELPHIA ST ONTARIO,
CA (TEXT IN ENHANCEMENT)
M/F: (TCN) FM528862170038
RDD:
PROJ: TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A01 DIST: ADV: 2A FC: 6B
Need Ship Date:00/00/0000 Original Required Delivery Date:08/11/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017790213 0001 PG 1.000
NSN/MATERIAL:6550012317217
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
SPE2DS-26-T-325R
SECTION B
PR: 7017790213 PRLI: 0001 CONT’D
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
SPE2DS-26-T-325R
SECTION B
PR: 7017790213 PRLI: 0001 CONT’D
FM5288
FM5288 51 MED COBLOG DET 1 OLA SGSL
BLDG 1006 CP 011 051 979 4080
GONGHANG JINIP RO 42 ST #54
BUSAN 46718
KR
MEDICAL AIR BRIDGE WEST. FOR ELIGIBLE ITEMS: SD0379. CARDINAL HEALTH, 4551 EAST PHILADELPHIA ST ONTARIO,
CA (TEXT IN ENHANCEMENT)
M/F: (TCN) FM528862170151
RDD:
PROJ: TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A01 DIST: ADV: 2A FC: 6B
Need Ship Date:00/00/0000 Original Required Delivery Date:08/11/2026
SPE2DS-26-T-325R NSN/Part Number: 6550-01-231-7217 Quantity: 1 PG Purchase Request: 7017790213QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 621410
New
DIBBS
CULTURE MEDIA, SALMONEL
Solicitation # SPE2DS-26-T-322Z
This contract pertains to the procurement of Culture Media, specifically Salmonella Shigella Agar and Xylose Lysine Deoxycholate Agar, identified by NSN 6550-01-358-3835 and manufacturer part number R02140 from REMEL INC. The items are classified as Type I (Code A) with a strict non-extendable shelf-life of one month and require refrigeration between 2 and 8 degrees Celsius throughout storage and transport. The product is regulated by the FDA and must be supplied with full disclosure of the source and part number. Packaging must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and all units must be sealed in commercial containers designed to prevent damage, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. Delivery is required FOB destination within 20 days, and the packaging must adhere to MIL-STD-2073-1E standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract falls under a federal solicitation with NAICS code 621410 managed by the Department of Defense’s Medical Supply Chain. Covered Defense Information may apply, and bidder information must be submitted to the product specialist via EBS for FDA confirmation prior to award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 621410
New
SLED
OB/Gyn Services
Solicitation # RFA 27-630-8000-0037
The New Mexico Health Care Authority is soliciting applications for funding under the OB/Gyn Services in Northwest New Mexico initiative, with a total available funding pool of $1,000,000 to support the delivery and expansion of maternal and reproductive health services in Cibola, McKinley, San Juan, Valencia, and Catron counties. Eligible applicants must be Medicaid-enrolled providers currently serving Medicaid recipients and must propose services eligible for Medicaid reimbursement, including prenatal and postpartum care, labor and delivery, gynecologic examinations, family planning, cancer screenings, and menopause management. Proposals must be submitted electronically via the Euna Application Site by 11:59 p.m. MST on September 10, 2026, and must include a narrative of no more than 15 pages, a detailed budget using Appendix C’s cost response form, proof of eligibility, and optional letters of support. The funding period runs from September 1, 2026, to June 30, 2027, with services beginning no earlier than October 1, 2026, and all expenses must be incurred by June 30, 2027. Proposals will be evaluated on a 100-point scale based on service capacity and timeline (25 points), sustainability beyond grant funding (25 points), relevance to identified needs and Medicaid impact (20 points), budget reasonableness and financial management (20 points), and organizational expertise (10 points), with a panel of experts scoring each application independently. Funding is contingent upon legislative appropriation, and if not secured, the agreement terminates immediately. Awarded entities must provide verification of service delivery within 90 days after the funding period ends or forfeit the award, and submit a final report detailing the program’s impact. All materials developed under the agreement become property of the State of New Mexico, and contractors must comply with strict confidentiality, conflict of interest, debarment, and equal opportunity requirements tied to state and federal statutes, including the Governmental Conduct Act and 45 C.F.R. Part 76. Invoices must be submitted monthly or quarterly as retrospective payments, with a strict deadline of 15 days after the end of the fiscal year for payment eligibility. Records must be retained for five years following final payment and are subject to audit by the HCA, Department of Finance and Administration, or State Auditor. Payment is made within 30 days of
New Mexico Human Services Department

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIUM, GRAM NE
Solicitation # SPE2DS-26-T-311Y
This contract specifies the procurement of Gram Negative Broth culture medium in liquid form, 8 mL per unit, requiring refrigeration between 2 to 8 degrees Celsius. The item is identified by NSN 6550-01-231-7217 and must be supplied in packaging units of 100 units per pack (PG), with a total quantity of one pack. The item has a non-extendable shelf life of nine months, governed by DLA’s RS009 requirement for Type I Code G items, and must comply with DLA Packaging Requirements RP001 and Medical Marking Standard No. 1, which supersedes MIL-STD-129. The product is regulated by the FDA, and bidders must provide the manufacturer name, part number, and source for verification prior to award. All supplies must be marked according to MMS No. 1, and government identification must be removed from non-accepted items. Delivery is required within five days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must conform to MIL-STD-2073-1E, and the contract references technical and quality standards from the DLA Master List. The solicitation, issued under SPE2DS-26-T-311Y, was posted on August 5, 2026, with a response deadline of August 11, 2026, and is managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
CHLORINE TEST TABLE
Solicitation # SPE2DS-26-T-314L
The contract is for the procurement of 3 packages of chlorine test tablets, each containing 100 tablets, identified by NSN 6550-01-574-6867 and solicitation number SPE2DS-26-T-314L. The tablets are designed to measure combined chlorine levels in water using DPD No. 3 reagent, which detects sanitizers that have reacted with impurities. The item is classified as a TYPE I (CODE P) medical supply with a mandatory non-extendable shelf life of 30 months, and no more than four months may have passed from the date of manufacture to the date of delivery to the government. Packaging and labeling must adhere strictly to Medical Marking Standard No. 1, replacing MIL-STD-129, and all containers must include the date of manufacture, expiration or retest date, and the contract or lot number as specified in MMS1C. The product must be packaged in sealed commercial unit containers and shipped in suitable exterior packaging to ensure safe, low-cost delivery to the specified point of performance in San Diego, California, under commercial shipping standards. The contract falls under federal medical acquisition guidelines and incorporates technical and quality requirements from the DLA Master List, with compliance controlled by the version in effect on the solicitation issue date. Packaging must meet DLA packaging requirements, and government identification must be removed from non-accepted supplies. The product is subject to Covered Defense Information potentially applying under RD003. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, and the required delivery is set for 20 days after award. All supplies must be delivered to the designated location in San Diego, and the point of contact for inquiries is Anh Lam at the Department of Defense’s Medical Supply Chain. The NAICS code 621410 identifies this as a medical laboratory services procurement under federal acquisition regulations.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
BETA-LACTAMASE DETECTI
Solicitation # SPE2DS-26-T-311T
The contract specifies the procurement of beta-lactamase detection discs, packaged in tubes containing 50 discs each, with a total order of 10 tubes. These discs require refrigerated storage between 2 to 8 degrees Celsius and are classified as a TYPE I (CODE H) item with a non-extendable shelf life of 12 months, meaning no more than one month may have elapsed from the date of manufacture to the date of government delivery. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all labels must clearly indicate the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C. Items must be sealed in commercial unit containers that protect against damage and packed in commercial shipping containers suitable for safe transport at the lowest carrier rate to the specified delivery point. The product is subject to DLA packaging requirements and the removal of government identification from non-accepted supplies. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The purchase is under solicitation SPE2DS-26-T-311T, with a 20-day delivery window and procurement managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
PLASMA CONTROL, NORMAL
Solicitation # SPE2DS-26-T-310P
PLASMA CONTROL, NORMAL LEVEL is a quality control solution designed for citrated plasma samples used in prothrombin time and activated partial thromboplastin time coagulation testing. It is intended exclusively for use with citrated PT and APTT cuvettes on the Coagulation Analyzer NS 6630 and comes in a kit of 15 vials packaged in 4 sleeves. The product must be stored refrigerated between 2 and 8 degrees Celsius and has a non-extendable shelf life of nine months. It is classified as a Type I (Code G) medical item regulated by the FDA and requires proper handling, labeling, and packaging in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is supplied by WERFEN USA LLC under part number 000DCJCPT-N and is identified by NSN 6550-01-519-7696. The contract specifies delivery within five days FOB destination with zero tolerance for quantity variance and inspection and acceptance occurring at the delivery point. Packaging must meet MIL-STD-2073-1E standards, ensuring protection during transit via commercial carriers at the lowest cost, with exterior containers suitable for export if required. All supplies must be marked in accordance with MMS No. 1, and government identification must be removed from non-accepted items. The solicitation number is SPE2DS-26-T-310P with a response deadline of August 11, 2026, and the procurement is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at JBER, AK. Bidder information including manufacturer details and part numbers must be provided during submission.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
TEST SLIDE, CSF PROT
Solicitation # SPE2DS-26-T-312N
The TEST SLIDE, CSF PROT is a specialized reagent slide designed for cerebral spinal fluid protein analysis, requiring strict temperature control with all units shipped and received frozen at minus 18 degrees Celsius. Each unit of issue consists of one package (PG) containing 90 slides, and the material must comply with Commercial Packaging standards as specified in the procurement document, ensuring protection against damage during transit. All packaging and marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, with labels clearly indicating the date of manufacture, expiration date, contract number, and lot number in accordance with MMS1C. The item has a non-extendable shelf life of 12 months, and no more than one month may have elapsed from the date of manufacture to the date of government delivery. Technical and quality requirements referenced under RA001 are governed by the DLA Master List, and the item is subject to applicable defense information and packaging standards identified under RD003 and RP001. The NSN is 6550-01-449-6818, with a single package ordered under purchase request 7017766878, and delivery is due within 84 days after award. Bidders must specify the source and part number being offered, and all submissions must respond to solicitation SPE2DS-26-T-312N, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance address at APO 96260-5479.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
TUBE, SORBENT
Solicitation # SPE2DS-26-T-306J
The tube sorbent is a specialized sampling device featuring XAD-2 sorbent material in two sections totaling 140/270 mg, housed within a glass tube measuring 13 to 8 mm outer diameter and 75 mm in length. It includes a glass fiber filter, foam, and Teflon ring separators to isolate the sorbent sections and a protective cover for handling integrity. The unit is designed for commercial-grade packaging and must be sealed in a container capable of preventing damage or breakage during transport. Each package contains ten units, and packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129. All labeling must include the date of manufacture, expiration or retest date, and the contract or lot number, adhering to the latest revision of MMS1C. This item has a non-extendable shelf life of 12 months, and no more than one month may have elapsed from the date of manufacture to the date of delivery to the government. The product is subject to DLA packaging and quality requirements as referenced in the DLA Master List of Technical and Quality Requirements, specifically under R numbers for technical and quality controls. Covered defense information may apply. The item is identified by NSN 6550-01-566-1504 and is being procured under solicitation SPE2DS-26-T-306J, with a delivery requirement of 20 days ADO to APO, 96278-2060. The solicitation was posted on August 4, 2026, with responses due by August 10, 2026, and falls under NAICS code 621410 for medical supply chain operations within the Department of Defense.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 621410
New
DIBBS
GLOBULIN SERUM, ANTI-HU
Solicitation # SPE2DS-26-T-307T
GLOBULIN SERUM, ANTI-HUMAN is a medical supply item intended for the detection of human IgG bound to red blood cells, packaged in 10 mL vials with a unit of issue of one vial per VI. The product requires refrigerated storage between 2 to 8 degrees Celsius and must have a non-extendable shelf life of 12 months, with no more than one month elapsed between the date of manufacture and the date of delivery to the government. All labels must include the date of manufacture, expiration or retest date, contract number, and lot number, with shelf-life markings strictly compliant with the latest revision of MMS1C. Packaging and marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in a protective container within commercial shipping packaging suitable for safe delivery by common carrier at the lowest cost to the destination, which is APO, Korea with ZIP code 96260-5479. Delivery is FOB destination, with inspection and acceptance performed at the point of delivery, and the item must be delivered within 84 days after award. The contract falls under the NAICS code 621410 and is administered by the Department of Defense through the Medical Supply Chain MD Surg FSF. All submissions must be made electronically via the DLA Internet Bid Board System with a response deadline of August 10, 2026. Payment processing is managed through Wide Area WorkFlow (WAWF), requiring electronic invoicing with an Invoice and Receiving Report for fixed-price line items. The item is governed by a series of FAR and DFARS clauses including safeguards for covered defense information, cybersecurity requirements per NIST SP 800-171, restrictions on hazardous materials, export controls, whistleblower protections, and prohibitions on certain telecommunications equipment. The contractor must comply with hazardous material labeling standards, provide Safety Data Sheets if applicable, and ensure no covered defense telecommunications equipment is used unless exempted. The total estimated contract value is $5,996.00 across multiple line items, all identified by NSN 6550-01-242-2234. Offerors must provide a Unique Entity Identifier and CAGE code and certify their size status, including any socioeconomic designations, with affirmative responses triggering additional disclosures under the covered defense telecommunications clause.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 621410
New
DIBBS
TEST SLIDE, ALCOHOL DET
Solicitation # SPE2DS-26-T-305S
The contract specifies the procurement of TEST SLIDE, ALCOHOL DETERMINATION for use with VITROS CHEMISTRY SYSTEMS, with a unit of issue consisting of 90 slides per package and a total order quantity of 10 packages. The item is identified by NSN 6550-01-433-5349 and is subject to strict technical, quality, and packaging requirements aligned with the DLA Master List of Technical and Quality Requirements. The product must have a non-extendable shelf life of 15 months from the date of manufacture, with no more than two months elapsed between manufacture and delivery to the government. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and include mandatory labeling with the date of manufacture, expiration or retest date, and the contract or lot number. The slides must be stored frozen at minus 18 degrees Celsius and packed in commercial containers designed to ensure safe delivery by common carrier at the lowest feasible rate. The acquisition is governed by solicitation SPE2DS-26-T-305S, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a response deadline of August 10, 2026, and delivery required within 20 days after award to Langley AFB, Virginia. Bidders must clearly state the source and part number being offered.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 621410
New
SLED
OB/GYN Clinical Provider ServicesThe contract entails the provision of comprehensive obstetric and gynecological clinical services at a Federally Qualified Health Center in Hesperia, California, covering all phases of women’s reproductive healthcare including prenatal monitoring, labor and delivery support, postpartum follow-up, routine and specialized gynecological examinations, and the management of high-risk pregnancies. Services must align with the standards of a community-based healthcare facility serving underserved populations, ensuring accessible, continuous, and culturally competent care. The scope requires qualified providers to deliver integrated, patient-centered care within the operational framework of the sponsoring health center. The solicitation is categorized as a subcontract under NAICS code 621410, with a response deadline of October 24, 2026, and a posted date of August 3, 2026. While the contracting agency is identified as Community Health Center in California, the place of performance is specified as San Bernardino with a zip code of 92408, indicating that services may be delivered across a broader geographic area than Hesperia alone. The contract does not specify a set-aside classification, and no point of contact information is provided. Interested parties must submit proposals through the online portal linked in the solicitation, adhering to all procedural and compliance requirements outlined by the county’s procurement system.
Community Health Center

POSTED

6 days ago

DEADLINE

in 3 months
View Details
NAICS: 621410
New
SLED
Comprehensive Obstetrics/Gynecology Services for the Desert Region
Solicitation # DPHE26-CHC-6419
Community Health Center

POSTED

6 days ago

DEADLINE

in 3 months
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
HANDLE, LARYNGOSCOPE
Solicitation # SPE2DS-26-T-325V
The contract solicits a small pediatric laryngoscope handle made of chrome-over-brass, designed for use with a fiber optic laryngoscope blade and powered by a AA battery, with a unit of issue of one each. The item is identified by NSN 6515-01-396-4249 and is requested in a quantity of one unit for delivery within 20 days of award. The solicitation, numbered SPE2DS-26-T-325V, was posted on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 339112 for medical equipment manufacturing. The purchasing agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required at Laughlin AFB, Texas, and the primary point of contact is Michael Small. Bidders must specify the source and part number being offered and are required to comply with all referenced technical and quality specifications from the DLA Master List, packaging standards, and procedures for removing government identification from non-accepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CATHETER AND NEEDLE UN
Solicitation # SPE2DS-26-T-324C
The contract specifies the procurement of a sterile disposable intravenous catheter and needle unit in 18 gauge size with a 1.25 inch length, identified by NSN 6515-01-718-5456 and packaged in boxes of fifty. The product must meet stringent shelf-life requirements, including a non-extendable 36-month shelf life from the date of manufacturer, with no more than five months elapsed between the manufacture date and delivery to the government. All packaging and labeling must comply with the latest revision of MMS1A, clearly displaying the date of manufacture, expiration or retest date, and the contract and lot number. The item is classified as a TYPE I (CODE Q) item under RS020 and must adhere to DLA packaging standards and other technical and quality requirements referenced in the DLA Master List. The contract requires bidders to clearly identify the source and part number being supplied and mandates removal of government identification from non-accepted supplies. Delivery is required within five days of award, with the place of performance specified as Fort Lewis, Washington. The solicitation was issued on August 9, 2026, with responses due by August 17, 2026, under contract number SPE2DS-26-T-324C, managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
DEFIBRILLATOR TEST, DIS
Solicitation # SPE2DS-26-T-323X
The contract pertains to the procurement of a defibrillator test and discharge resistor with two leads, specifically designed for discharging capacitors in the defibrillation circuit of the ZOLL PROPAQ MD device, used exclusively for troubleshooting purposes. The item is issued individually, with a single unit required under the NSN 6515-01-691-7585, and must be delivered within 20 days of award. Bidders are required to clearly state the source and part number being supplied to ensure compatibility and compliance with technical specifications. The solicitation, identified as SPE2DS-26-T-323X, is issued by the Department of Defense under the Medical Supply Chain MD Surg Fsf, with performance to occur at Scott AFB, Illinois. It incorporates technical and quality requirements referenced in the DLA Master List, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must meet DLA standards, and government identification must be removed from rejected supplies. Covered defense information may apply, and all responses must be submitted by the deadline of August 17, 2026. Point of contact for inquiries is Brooke Webb, reachable via email or phone.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
PAD, ABDOMINAL
Solicitation # SPE2DS-26-T-325A
The product is an abdominal pad composed of multiple layers including absorbent fibers backed by a nonabsorbent fiber layer, covered with gauze or nonwoven fabric, with an alternative construction using cellulose wadding backed by nonabsorbent cotton and similarly covered. Each unit is packaged in a case of 144 pads and must maintain a shelf life of 36 months from manufacture, with no more than six months elapsed between manufacture and delivery to the government. All containers must be clearly marked with the lot or control number and the date of manufacture, prefixed with MFD. The item is identified by NSN 6510-01-271-7671 with a purchase quantity of six cases and a delivery requirement of 63 days after order award. The solicitation number is SPE2DS-26-T-325A, issued on August 9, 2026, with proposals due by August 17, 2026, under NAICS code 339112 for medical device manufacturing. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at APO ZIP 96260-5479 and primary point of contact Anh Lam via email and phone. The procurement follows DLA packaging requirements and incorporates technical and quality standards listed in the DLA Master List, with applicable revisions governed by the solicitation or amendment date. Government identification must be removed from any nonaccepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTURE
Solicitation # SPE2DS-26-T-323F
The contract is for the procurement of acupuncture needles specified as silver plated spiral wound handle, 0.35mm diameter by 75mm length, manufactured from sterile, disposable stainless steel and identified by the NSN 6515-01-673-6604, with a unit of issue of one box containing 100 needles. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, which must be reviewed in its version effective on the solicitation issue date or award date, depending on the acquisition type. Packaging must comply with DLA packaging standards, and government identification must be removed from any supplies not accepted. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-323F, was posted on August 9, 2026, with a response deadline of August 17, 2026, and is categorized under NAICS code 339112 for medical equipment manufacturing. It is a federal procurement under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, with performance delivery set for Hampton, Virginia, 23665-2040. The single purchase request calls for one box, with delivery required within 20 days of award. Primary point of contact is Dorothy Marquis at the provided email and phone number, and all bids must be submitted through the DIBBS portal prior to the deadline. Covered defense information may apply, and compliance with all applicable technical, quality, and packaging provisions is mandatory for acceptance.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
LITTER, RIGID, SEA-AIR, M
Solicitation # SPE2DS-26-T-324M
The contract calls for the procurement of two rigid sea-air medical evacuation litters, designated by NSN 6530-01-187-0104, with a delivery requirement within 20 days after award. Each litter measures 80 inches in length and 16.5 inches in width, constructed with a stainless steel or corrosion-resistant metal frame and a special cloth stretcher, designed to be folded in half, hoisted vertically or horizontally, backpacked, and carried without hands, enabling transport into confined spaces. The litters must be orange in color and include a urethane-coated carrying case. Mercury or mercury-containing compounds are strictly prohibited unless used in functional components such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions. Bidders are required to provide the source and part number of the litters being offered. The solicitation, issued under SPE2DS-26-T-324M with a response deadline of August 17, 2026, is managed by the Department of Defense’s Medical Supply Chain, with the place of performance in Jacksonville and primary point of contact Lisa Thomas-Wright.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334510
New
DIBBS
CONNECTOR, SURGICAL
Solicitation # SPE2DS-26-T-325F
The contract pertains to the procurement of a surgical connector made from corrosion-resistant metal, specifically a Diamond O2 quick connector with a DISE male fitting and check valve, designed for use with oxygen tubing. Each unit is sold individually, with a total order quantity of ten units identified by the NSN 6515-01-457-0271 and required for delivery within five days of award. The item falls under the NAICS code 334510 and is part of a federal solicitation issued by the Department of Defense’s Medical Supply Chain, with performance located in San Antonio, Texas. All units must be packaged in sealed commercial containers that protect against damage and meet the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Shipping containers must ensure safe delivery via common carrier at the lowest feasible rate, and all packaging must comply with DLA packaging requirements. The product is subject to Defense Information that may be controlled, and technical and quality compliance standards referenced as R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders are required to specify the source and part number being offered, and the solicitation’s response deadline is August 17, 2026.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 327992
New
DIBBS
DENTAL KIT, EMERGENCY
Solicitation # SPE2DS-26-T-325D
The DENTAL KIT, EMERGENCY is a standardized medical supply containing a dental exam mirror, dental stick, toothbrush, toothpaste, dental floss, cotton-tipped applicators, oil of cloves, temporary cavity filling material, aspirin, and a gauze pad, all packaged as a single unit for immediate use. The kit must be delivered to the government within two months of manufacture and is subject to strict shelf-life requirements as a TYPE I (CODE H) item with a non-extendable 12-month shelf life. The product is regulated by the FDA, and bidders must provide the manufacturer name, part number, and source details, with the specified part number being 700014 from MYHRE'S EXPLORATION PRODUCTS, INC. All packaging must comply with commercial standards and MIL-STD-2073-1E, and items must be marked in accordance with Medical Marking Standard No. 1, ensuring protection from damage and safe transport via common carrier to the delivery point at Travis Air Force Base, California. The unit of issue is each (EA), with a contract quantity of one unit, delivery due within 20 days FOB destination, and no variance allowed in quantity. The solicitation falls under NAICS code 327992 and is governed by DLA technical and quality requirements referenced in the DLA Master List, with the contracting official required to submit an FDA referral through EBS including all manufacturer and bidder details.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
DRESSING, COMPRESSION, T
Solicitation # SPE2DS-26-T-323C
This item is a sterile, flat-fold compression dressing designed for one-handed use in emergency trauma situations involving arterial bleeding and severe hemorrhaging in limbs. It features a 4-inch wide by 60-inch long elastic bandage and an 8-inch wide by 10-inch long absorbent pad, all packaged in a compact 4-inch by 6-inch by 0.6-inch unit weighing 3.6 ounces. The dressing meets TAA compliance standards and is intended for immediate, effective application under any condition to control life-threatening bleeding. Each unit is individually wrapped and must have a minimum 60-month shelf life, with no more than nine months elapsed between the manufacturer’s production date and the delivery date to the government. The item is identified by NSN 6510-01-598-8418 and is being procured in quantities of 20 units under solicitation SPE2DS-26-T-323C, with a delivery deadline of 20 days after award. The procurement falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain division, with performance occurring at Fort Drum, New York. Technical and packaging requirements are governed by DLA’s Master List, and government identification must be removed from any non-accepted supplies. The contract point of contact is Kendall Jones at DLA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CEMENT, ORTHOPEDIC SURG
Solicitation # SPE2DS-26-T-325Z
The contract specifies the procurement of a radiopaque orthopedic surgical cement set, supplied as a unit of issue containing ten each of sterile powder and liquid monomer components. Each set includes a 40-gram sterile powder mixture of polymethyl methacrylate, methyl methacrylate styrene copolymer, and barium, along with a 20-milliliter sterile liquid monomer ampule. The product must have a shelf life of 36 months, with no more than five months elapsed between the date of manufacture and delivery to the government. All packaging must meet commercial standards, with each unit sealed in a protective container to prevent damage and shipped in suitable exterior containers optimized for safe, low-cost delivery to the specified point in Williamsburg, Virginia. Markings on all containers must include the lot or control number and date of manufacture preceded by “MFD” and conform to Medical Marking Standard No. 1, which replaces MIL-STD-129. The material is classified as hazardous, requiring compliance with 49 CFR and ICAO regulations for transport, and a current Material Safety Data Sheet (MSDS) must accompany each shipment and be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The NSN is 6515-01-153-5275, the solicitation number is SPE2DS-26-T-325Z, and delivery is required within five days after delivery order.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
BLADE, SURGICAL KNIF
Solicitation # SPE2DS-26-T-324X
The contract specifies the procurement of 3 packages, each containing 10 detachable surgical knife blades, totaling 30 units, under NSN 6515-01-538-8302, with delivery required within 5 days FOB destination to Camp Pendleton, California. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding any general standards like ASTM D3951, and must adhere strictly to Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport by common carrier at the lowest cost. The blades must include a safety locking system for maximum protection during handling and use. Marking and labeling must follow MMS No. 1 guidelines, and parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The contract requires zero variance in quantity, with inspection and acceptance occurring at the destination. The solicitation number is SPE2DS-26-T-324X, with a response deadline of August 17, 2026, and the item is classified under NAICS code 339112 for surgical appliance and supply manufacturing. The delivery point is governed by government addresses provided, and the order is subject to covered defense information protocols.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details