Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Custom Reception Counter (SCE)

Active

State & Local

Response Deadline09/15/2026, 09:00:21 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the California Facilities, Planning and Management agency involves the fabrication, supply, and installation of one custom L-shaped reception counter. The contractor is required to build the desk according to specific layout drawings and SCE Reception Specifications, utilizing high-pressure laminates or other custom finishes. A critical requirement of the project is ensuring that all transaction heights are fully compliant with ADAAG standards. The solicitation was posted on August 20, 2026, with a response deadline of September 15, 2026. Classified under NAICS code 337120, this project is designed for prime contractors managing facilities projects. Further details and submission portals are available through the OpenGov procurement system.

General Info

Fabricate and install one ADA-compliant custom L-shaped reception counter for California FPM agency.

Agency

California → Facilities, Planning and ManagementView Agency

NAICS

337127 - Institutional Furniture ManufacturingView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of 2026-063.

The full solicitation package (23 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Custom Furniture (FF&E) for the Technology & Health Building

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 20

subcontract

Response DeadlineSep 15

Submission deadline

Response Deadline

09/15/2026, 09:00:21 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Facilities, Planning and Management

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Facilities, Planning and Management

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and installs a custom L-shaped reception counter for prime contractors on Facilities, Planning and Management projects. Fabricates reception desk based on layout drawings using high-pressure laminates or custom finishes per SCE Reception Spec. Ensures ADAAG compliance for transaction heights. Delivers one L-Shaped SCE Reception Counter.

Similar Contracts

Same NAICS industry code

Durable Office/Institutional Furniture Supply

Navsup Flt Logistics Ctr Pearl Harbor

POSTED

DEADLINE

Bowling Center Furniture

Solicitation # F3Y0AK6124A001

This solicitation, issued by the Department of Defense for the AFSC PZIOB at Tinker AFB, Oklahoma, is for the procurement and installation of bowling center furniture. The order consists of nine Kensington sofas, including one left-facing single, one right-facing single, and seven double sofas, along with eight Cardinal oval coffee tables. All seating features CNC-cut plywood frames, CAL117 fire-rated foam, and Spradling Patriot Plus vinyl upholstery with steel legs. The coffee tables are constructed from plywood with Wilsonart laminate finishes. The contract includes comprehensive installation services, which encompass the removal and transport of existing Lane furniture to DRMO, off-loading, staging, assembly, and final installation of the new pieces. The scope of work also requires final adjustments, site cleanup, and trash removal. This is a total small business set-aside opportunity under NAICS code 337127.

FA8136 Afsc Pziob

POSTED

DEADLINE

Shelving and Lab Stools for ARS

Solicitation # 123A9426Q0040

Solicitation 123A9426Q0040 is a combined synopsis and request for quotation issued by the USDA Agricultural Research Service for the procurement of specialized commercial shelving and laboratory seating for the Plant Bioscience Research Building in Pullman, Washington. The requirement is unrestricted and open to all responsible sources under NAICS code 337127. The scope of work includes the delivery of 75 mobile cold-storage shelving units, 33 stationary cold-storage units, 30 mobile chrome wire shelving units, 52 polyurethane lab chairs, and 14 sit/stand work stools. All shelving must be commercial grade, epoxy-coated for chemical and rust resistance, and capable of supporting 800 to 1,000 pounds per shelf. The seating must be non-cloth, puncture-resistant, and chemical-resistant. Award will be made based on the lowest price technically acceptable criteria, evaluating both price fairness and past performance. To be considered responsive, offerors must provide a Unique Entity ID, country of origin for all items, specification sheets with pictures, and complete remittance information. All items must be delivered FOB Destination by September 21, 2026, with the total contract duration not exceeding three months. Quotations are due by September 3, 2026, and prices must remain firm for 90 calendar days. The procurement incorporates standard FAR commercial item clauses, including Buy American preferences and HUBZone price evaluation preferences.

Usda, Fsis, Oas Pcmb

POSTED

DEADLINE

in about 9 hours

BMET Work Center Furniture Package-Workbenches and Installation

Solicitation # FA301626Q0276

The 502d Contracting Squadron is seeking quotes for the turn-key delivery, assembly, and installation of a Biomedical Equipment Technician Work Center Furniture Package at the Port San Antonio Consolidated Storage and Deployment Center in Texas. This open-market commercial solicitation is set aside 100 percent for small businesses under NAICS 337127 and is conducted on a brand name or equal basis, specifically referencing Lista or Vidmar products. Contract award will be determined using a Best Value Tradeoff methodology, where technical capability, delivery and installation schedules, and past performance are weighted as significantly more important than price. Interested parties must submit all inquiries by September 10, 2026, with final quotes due to the designated contracting officials by September 14, 2026.

FA3016 502 Cons Cl

POSTED

DEADLINE

RFP - U6415-278111 PSIB Workspaces

Solicitation # WS5825864392

Public Works Government Services Canada, acting on behalf of Innovation, Science and Economic Development Canada, is soliciting bids for the purchase, delivery, and installation of office furniture. This requirement is governed by Standing Offer SA E60PQ-140003/PQ version D and will be executed in Ottawa, Ontario, within the National Capital Region. The solicitation, identified as WS5825864392, was posted on September 4, 2026, with a strict submission deadline of September 22, 2026, at 7:00 PM. All necessary documentation and attachments are available exclusively through SAP Ariba accounts. Interested parties should coordinate with the primary contracting authority, Katia-Annik Torkia, regarding this federal opportunity.

Department of Public Works and Government Services

POSTED

DEADLINE

EH990-261440 PSIB Office Seating RFP

Solicitation # WS5825280654

The Department of Public Works and Government Services for the Government of Canada has issued a solicitation under number WS5825280654 for the EH990-261440 PSIB Office Seating RFP. This federal procurement opportunity, categorized under NAICS code 337122, focuses on providing office seating solutions within the National Capital Region. Interested parties must submit their responses by the deadline of September 17, 2026, at 7:00 PM. Nancy Sell serves as the primary contracting authority for this requirement. Further details and submission guidelines are available through the CanadaBuys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

EF236-270075, Acquisition of office furniture under SA CAT 1, 2, 3, 5 for RCMP floor A

Solicitation # WS5755505099

Public Works and Government Services Canada is issuing a request for proposal on behalf of the Royal Canadian Mounted Police for the acquisition, delivery, and installation of office furniture. The project specifically covers workspaces for floor A in Westmount, Quebec, under standing offer categories 1, 2, 3, and 5. The solicitation, identified by number WS5755505099, is open to bidders under various international and domestic trade agreements, including CFTA, CETA, and the WTO GPA. Interested parties must submit their responses by the deadline of August 25, 2026. The procurement is managed by the Department of Public Works and Government Services with Lisa-Marie Julien serving as the primary contracting authority.

Department of Public Works and Government Services

POSTED

DEADLINE

86100-260858 - Purchase of office furniture under the SA for category 4 - Phone Booths for IRB

Solicitation # WS5846446185

Public Works and Government Services Canada, acting on behalf of the Immigration and Refugee Board of Canada, is seeking proposals for the purchase, delivery, and installation of office furniture, specifically phone booths. This procurement is being conducted under the supply arrangement E60PQ-140003/D and will serve locations in Montreal, Vancouver, and Ottawa. The solicitation, identified by number WS5846446185, was posted on September 4, 2026, with a response deadline of September 24, 2026. Interested parties should coordinate with the primary contracting authority, Corine Lavoie, regarding the submission of bids for this federal government requirement.

Department of Public Works and Government Services

POSTED

DEADLINE

Detention and Facility Specialties Supplier/InstallerThis subcontract opportunity is for the supply and installation of specialized security and facility equipment for the Town of Strasburg police department upgrade projects. The selected provider will work with prime contractors to deliver and install bullet resistant panels, metal lockers, detention gun lockers, and various detention furnishings. The project is located in Strasburg, Virginia, under NAICS code 337127. Interested parties must submit their responses by the deadline of October 19, 2026.

Town of Strasburg

POSTED

DEADLINE

in about 1 month

Marine Corps Recruit Depot Initial Outfitting Project

Solicitation # W9127S26QA048

This solicitation, numbered W9127S26QA048, is an 8(a) Small Business Set-Aside for the Marine Corps Recruit Depot Initial Outfitting Project, issued under NAICS code 337127 for Institutional Furniture Manufacturing, with a size standard of 500 employees. Only small business concerns may respond, and contractors must ensure that at least fifty percent of the contract value consists of commodities or supply items manufactured or processed by domestic small businesses. If no qualified small manufacturers exist for any item, contractors must immediately notify the Contracting Officer to seek a waiver before submitting a quote. The Nonmanufacturer Rule and Buy American Act clauses apply, and failure to comply may result in protest, delay, or cancellation. Offers must be submitted by September 1, 2026, at 4:00 p.m. Eastern Time, with a mandatory site visit scheduled for August 12, 2026, at 11:00 a.m. Pacific Time, requiring prior coordination with Timothy Pighee or Vonda Rogers. The Statement of Work is included, and the acquisition follows commercial item procedures under FAR Part 12, incorporating specific provisions and clauses by reference, including RFO 52.212-4 and its addendum. The Government is not responsible for construction delays or financial hardships linked to the overall project timeline, making it imperative that the Initial Outfitting contractor maintains sufficient financial resources to sustain operations through potential construction delays. Contractors are strongly advised to coordinate closely with the USACE Contracting Officer’s Representative and Facility Project Manager to align outfitting milestones with the general contractor’s schedule and mitigate cost impacts. While the Government may consider limited assistance under applicable laws, contractors are expected to exhaust their own resources before requesting financial aid such as prepayments or interest payments. The awardee will be subject to performance evaluations under the Contractor Performance Assessment Reporting System, and all quotations must adhere to the instructions and evaluation criteria outlined in RFO 52.212-1 and RFO 52.212-2. The procurement is managed by the U.S. Army Corps of Engineers office in Little Rock, Arkansas, and all communications and submissions must be directed through the designated points of contact.

W076 Endist Little Rock

POSTED

DEADLINE

Research Vivarium Bedding Material Dispenser

Solicitation # 36C24626Q1020

The Department of Veterans Affairs, through Network Contracting Office 6, is soliciting bids for a Research Vivarium Bedding Material Dispenser under solicitation number 36C24626Q1020. This procurement falls under NAICS code 337127 and is open to all qualified bidders as there is no specific set-aside designated for this requirement. Interested parties must submit their responses by September 10, 2026, at 5:00 PM. The equipment will be utilized at a performance location in Richmond, Virginia. Primary inquiries regarding this solicitation should be directed to Cedric Frasier via the provided contact information.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Electrostatic Discharge (ESD) compliant laboratory benches and chairs

Solicitation # 80NSSC26941644Q

Solicitation 80NSSC26941644Q is a firm-fixed-price, small business set-aside procurement issued by the NASA Shared Services Center for the acquisition of brand-name Treston Electrostatic Discharge (ESD) compliant laboratory furniture. The requirement consists of 14 ESD lab benches featuring 6-inch double drawer assemblies, 15 AMP electrical channels, instrument shelves with a 500lb capacity, and LED undershelf lighting, along with 14 Integra ESD upholstered chairs with a minimum weight capacity of 300lb. All items must be delivered FOB Destination to NASA GSFC Code 524 in Greenbelt, Maryland, where final inspection and acceptance will be conducted by the NASA Point of Contact to ensure all specifications are met and items are free of defects. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. To be considered for award, offerors must be registered in the System for Award Management (SAM) and provide both proof of pricing from the manufacturer and official authorization from the original equipment manufacturer to resell the specified Treston items. Quotes must be submitted by September 9, 2026, and must remain valid for 30 days. The procurement includes specific federal requirements regarding duty-free entry marking for foreign suppliers and mandates that the contractor obtain all necessary export licenses for the performance of the contract.

NASA Shared Services Center

POSTED

DEADLINE

More opportunities from California → Facilities, Planning and Management

Same awarding agency

Custom Technical Work Tables (CNET)This subcontract for the California Facilities, Planning and Management agency involves the fabrication and delivery of custom technical work tables. The contractor is responsible for producing 40 standard CNET work tables and 8 ADA-compliant CNET work tables, ensuring all units adhere to specific furniture specification sheets, layout references, and custom finishes. All deliverables must maintain strict BIFMA and UL compliance to meet industry safety and quality standards. The project falls under NAICS code 337127 and was posted on August 20, 2026, with a response deadline of September 15, 2026. The scope of work is designed to support prime contractors operating within facilities, planning, and management projects.

Institutional Furniture Manufacturing

POSTED

DEADLINE

Compartments, Cubicles, and PartitionsThis subcontract opportunity with the California agency Facilities, Planning and Management involves the supply and installation of modular partitions, cubicles, and compartments. The selected provider will be responsible for delivering and installing these systems for prime contractors on various agency projects. The contract falls under NAICS code 238390 and was posted on August 20, 2026. Interested parties must submit their responses by the deadline of September 15, 2026.

Other Building Finishing Contractors

POSTED

DEADLINE

Decorative Metal RailingsThis subcontract opportunity with the California Facilities, Planning and Management agency involves the fabrication, supply, and installation of architectural decorative metal railings. The selected provider will work with prime contractors to deliver completed railing systems for various agency projects, operating under NAICS code 238120. The solicitation was posted on August 20, 2026, with a response deadline of September 15, 2026. Interested parties can find further details and submission guidelines through the OpenGov procurement portal.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Specialty Flooring & CeilingsThis subcontract for Specialty Flooring and Ceilings is issued by the California agency for Facilities, Planning and Management. The selected provider will be responsible for supplying and installing specialty ceiling systems and flooring for prime contractors, specifically focusing on the installation of specialty ceiling grids, acoustic panels, and various specialty flooring materials. The project is categorized under NAICS code 238330. The solicitation was posted on August 20, 2026, and the deadline for responses is September 15, 2026. The primary objective of the contract is the successful delivery of completed specialty ceiling and flooring installations across designated project sites.

Flooring Contractors

POSTED

DEADLINE

Specialty Signage & Visual DisplaysThis subcontract for Specialty Signage and Visual Displays involves the fabrication, supply, and installation of dimensional lettering and visual display surfaces, including whiteboards, for prime contractors working on Facilities, Planning and Management projects in California. The selected provider is responsible for executing all work according to the specific signage schedule and ensuring all installations strictly adhere to ADAAG, ANSI A117.1, and NFPA 101 Life Safety Code standards. The opportunity is categorized under NAICS code 238990 and was posted on August 20, 2026, with a response deadline of September 15, 2026. All deliverables must be fully installed and compliant with the required safety and accessibility regulations.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Plastic Fabrications & Specialty SurfacesThis subcontract for Plastic Fabrications and Specialty Surfaces involves the supply and installation of custom plastic components for prime contractors working on projects under the California Facilities, Planning and Management agency. The scope of work includes specialized technical processes such as cold bending, hot bending, thermoforming, and drape forming of plastics, as well as the lamination of back-lit wall cladding, transaction tops, and countertops to various substrates. All deliverables must maintain UL compliance to ensure safety and quality standards. The contract falls under NAICS code 238130 and requires the provider to deliver fully installed specialty fabrications and countertops. Interested parties must respond by September 15, 2026.

Framing Contractors

POSTED

DEADLINE

Architectural Woodwork & Finish CarpentryThis subcontract for Architectural Woodwork and Finish Carpentry supports Facilities, Planning and Management projects within California. The scope of work involves performing finish carpentry and installing architectural wall panels and cabinets for prime contractors. Specific tasks include the installation of wood furring, blocking, shims, and plastic-laminate-clad cabinets, with a requirement to scribe components to adjacent finishes to ensure all installations are plumb and level. All work must comply with ASTM E 84 standards. The solicitation was posted on August 20, 2026, with a response deadline of September 15, 2026. This opportunity falls under NAICS code 238350 and focuses on the delivery of fully installed architectural cabinets and wall panels.

Finish Carpentry Contractors

POSTED

DEADLINE

Custom Furniture (FF&E) for the Technology & Health Building

Solicitation # 2026-063

Mount San Antonio College is soliciting bids for the procurement, fabrication, and installation of custom furniture, fixtures, and equipment (FF&E) for the new Technology and Health Replacement Building in Walnut, California. This project, part of a larger multi-phase facility expansion, involves providing specialized furniture for various environments, including lecture classrooms, laboratories, computer labs, faculty offices, and student communal spaces. Key deliverables include custom L-shaped reception counters for the SCE Pathways and Division Office suites, as well as a significant quantity of custom CNET work tables, including ADA-compliant versions. The scope of work encompasses space planning, furniture development, coordination of vendor proposals, and field installation. All furniture must adhere to 2010 ADA Standards for Accessible Design and is encouraged to incorporate environmental sustainability principles, such as using FSC-certified wood. The contract will be awarded to the lowest responsive and responsible bidder. Successful respondents must provide bid security and, upon award, execute both performance and payment bonds covering 100% of the contract price. Contractors are required to maintain specific insurance coverages, including commercial general liability, employers liability, and automobile liability, naming the District as an additional insured. Compliance with California prevailing wage laws and a 3% participation goal for Disabled Veteran Business Enterprises (DVBE) are mandatory. Technical requirements include strict material standards, such as the prohibition of particle board for primary work surfaces, and specific acclimation protocols for materials prior to installation. Bids must be submitted electronically through the Mt. SAC eProcurement Portal by the specified deadline in September 2026.

Institutional Furniture Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS