Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Architectural Woodwork & Finish Carpentry

Active

State & Local

Response Deadline09/15/2026, 09:00:21 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Architectural Woodwork and Finish Carpentry supports Facilities, Planning and Management projects within California. The scope of work involves performing finish carpentry and installing architectural wall panels and cabinets for prime contractors. Specific tasks include the installation of wood furring, blocking, shims, and plastic-laminate-clad cabinets, with a requirement to scribe components to adjacent finishes to ensure all installations are plumb and level. All work must comply with ASTM E 84 standards. The solicitation was posted on August 20, 2026, with a response deadline of September 15, 2026. This opportunity falls under NAICS code 238350 and focuses on the delivery of fully installed architectural cabinets and wall panels.

General Info

Subcontract for architectural woodwork and finish carpentry installations for California facilities projects.

Agency

California → Facilities, Planning and ManagementView Agency

NAICS

238350 - Finish Carpentry ContractorsView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of 2026-063.

The full solicitation package (23 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Custom Furniture (FF&E) for the Technology & Health Building

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 20

subcontract

Response DeadlineSep 15

Submission deadline

Response Deadline

09/15/2026, 09:00:21 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Facilities, Planning and Management

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Facilities, Planning and Management

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs finish carpentry and installs architectural wall panels and cabinets for prime contractors on Facilities, Planning and Management projects. Installs plastic-laminate-clad cabinets, wood furring, blocking, and shims. Scribes components to adjacent finishes to ensure plumb and level installation. Requires ASTM E 84 compliance. Delivers installed architectural cabinets and wall panels.

Similar Contracts

Same NAICS industry code

Interior Finish Carpentry & CabinetsThis subcontract opportunity is for the provision of interior finish carpentry and architectural cabinet installation for prime contractors working on County of San Bernardino facility projects. The scope of work includes the installation of premium grade architectural woodwork, the application of water-based polyurethane finishes, and the installation of plastic-laminate-faced cabinets to deliver completed interior trim and cabinetry. The project is located in San Bernardino, California, under NAICS code 238350. Interested parties must submit their responses by September 30, 2026, at 5:00 PM.

POSTED

DEADLINE

Doors & Hardware

USDA Forest Service

POSTED

DEADLINE

in about 1 month

Commercial Door and Hardware InstallationThis subcontract for Commercial Door and Hardware Installation involves the replacement of selective doors, frames, and hardware for prime contractors at the Saint Croix National Scenic Riverway. The scope of work includes the removal of existing units and the installation of new commercial-grade doors, metal frames, and specialized security hardware such as locks, closers, and hinges. Managed by the Department of the Interior under the agency Mwr NEKOTA, the project falls under NAICS code 238350. Qualified providers must possess valid carpentry or locksmithing licenses to perform the installation and delivery of all required materials.

Mwr NEKOTA(63000)

POSTED

DEADLINE

Window Installation and Replacement (Bldg 13)

Csa Southwest 7 Usda-Fs

POSTED

DEADLINE

Rough & Finish CarpentryThis subcontract opportunity with the Department of Agriculture, specifically for Csa Intermountain 8 Usda-Fs, involves providing rough and finish carpentry services for US Forest Service projects. The scope of work includes performing framing, sheathing, and interior architectural woodwork, with specific requirements for rough carpentry under Section 06 10 00, cementitious sheathing under Section 06 16 63, and finish carpentry under Section 06 20 00. The primary objective is the delivery of framed structures and completed wood interiors. The project is located in Lyndhurst and falls under NAICS code 238350. This is a total small business set-aside contract. Interested parties must respond by September 18, 2026, following the posting date of September 4, 2026.

Csa Intermountain 8 Usda-Fs

POSTED

DEADLINE

Doors, Frames & GlazingThis subcontract opportunity with the Department of Veterans Affairs, Network Contract Office 23, involves the supply and installation of various door and window systems for the Building 5 kitchen renovation project in Sioux Falls, South Dakota. The scope of work includes hanging hollow metal doors and frames, installing interior wood doors, performing glazing, and installing manual crank-up coiling counter doors within fire-rated partitions. The contract is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238350. Interested parties must submit their responses by October 20, 2026, following the posting date of September 4, 2026.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

in about 1 month

Doors, Frames, and Hardware InstallationThis subcontract opportunity with the Department of Veterans Affairs involves the supply and installation of hollow metal doors, frames, access doors, and associated hardware for medical facility projects. The contractor is responsible for delivering fully functioning door assemblies, including fire-rated access doors and closers, while ensuring all installations comply with IBC and ABAAS standards. The project is located in Columbia, zip code 65201, and is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238350. Interested parties must respond by September 9, 2026, at 8:00 PM.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Openings and Door HardwareThis subcontract opportunity, titled Openings and Door Hardware, is issued by the Department of Veterans Affairs Office of Construction and Facilities Management for performance in Roseburg. The scope of work involves the installation of hollow metal doors, access doors, and associated hardware for prime contractors, ensuring all systems are fully installed and functioning. Specifically, the contractor must adhere to standards 08 11 13 for hollow metal doors and frames, 08 31 13 for access doors, and 08 71 00 for door hardware. The project falls under NAICS code 238350 and is designated as a Service-Disabled Veteran-Owned Small Business set-aside. The solicitation was posted on September 4, 2026, with a response deadline of September 10, 2026.

Office Of Construction & Facilities Management (36C10F)

POSTED

DEADLINE

Z--MORU VC GLASS & DOOR REPLACEMENT

Solicitation # 140P6326B0009

Solicitation 140P6326B0009 is an Invitation for Bid for a firm-fixed-price construction project at the Mount Rushmore National Memorial Visitor Center lower level. The scope of work involves the demolition and replacement of 43 lower-level viewing glass panels and the installation of two ADA-compliant accessibility door opener systems. Technical requirements specify the use of high-altitude rated insulated glazing units for an elevation of 5500 feet, adhering to ANSI Z97.1 and CPSC 16 CFR 1201 standards. Door openers must comply with ADA Section 404, ANSI/BHMA A156.10, and American Association of Automatic Door Manufacturers standards to ensure a full 90-degree opening for wheelchair access. The project is 100% set aside for Indian Small Business Economic Enterprise (ISBEE) firms under NAICS code 238350. The estimated contract value is between 250,000 and 500,000 dollars, with a performance period of 90 to 120 calendar days. Bids are due by September 9, 2026, at 1300 local time. Eligible offerors must be active in the System for Award Management and possess a Unique Entity ID. Contractors are also required to comply with Department of Labor wage determinations for Custer, Meade, and Pennington counties in South Dakota.

Mwr NEKOTA(63000)

POSTED

DEADLINE

Bldg 13 Window Replacement

Solicitation # 127EAX26Q0104

Solicitation 127EAX26Q0104 is a request for quotations for the removal and replacement of windows at Building 13, the Honeybee Breeding, Genetics and Physiology Research Laboratory in Baton Rouge, Louisiana. The project requires the installation of energy-efficient windows that match the style of Buildings 11 and 22, specifically covering eight 3x3 windows and one 2x2 window on the south elevation, and two 5x3 windows and four 3x3 windows on the north elevation. All installations must be plumb, level, and weather-tight according to manufacturer specifications. This acquisition is a total small business set-aside under NAICS code 238350 for Finish Carpentry Contractors, with a size standard of 19 million dollars. The contract is issued by the Department of Agriculture through the Csa Southwest 7 Usda-Fs office. Interested responsible sources must submit their quotations by the deadline of September 22, 2026.

Csa Southwest 7 Usda-Fs

POSTED

DEADLINE

Cabinet Installation - Springer, OK

Solicitation # 27696

The Chickasaw Nation is seeking a contractor for a cabinet installation project located in Springer, Oklahoma, under solicitation number 27696. The scope of work includes installing cabinetry and jamocha countertops with ebony stain across several areas, including a large kitchen with a pantry and lazy susan, a laundry room, and two bathrooms. The master bathroom requires a vanity and an upper cabinet above the toilet, while the second bathroom requires a vanity. This solicitation was posted on September 3, 2026, with a response deadline of September 8, 2026. Interested parties should contact Caitlen Wilkins for scheduling and further details. Please note that Davis-Bacon wage requirements may apply to this contract.

Chickasaw Nation

POSTED

DEADLINE

in about 12 hours

Kitchen and Bathroom CabinetryThis subcontract opportunity with the Department of the Interior involves the supply and installation of new kitchen cabinetry and bathroom vanities for National Park Service facility projects at Oregon Caves National Monuments and Preserve. The selected contractor will work under prime contractors to ensure all units are properly fitted and leveled, with a strict requirement to comply with Buy American Construction Materials regulations for domestic sourcing. The project is designated as a total Small Business Set Aside under NAICS code 238350. Interested parties must submit their responses by September 15, 2026, to be considered for the delivery and installation of these cabinetry components.

Pwr Pore Mabo (84000)

POSTED

DEADLINE

More opportunities from California → Facilities, Planning and Management

Same awarding agency

Custom Reception Counter (SCE)This subcontract for the California Facilities, Planning and Management agency involves the fabrication, supply, and installation of one custom L-shaped reception counter. The contractor is required to build the desk according to specific layout drawings and SCE Reception Specifications, utilizing high-pressure laminates or other custom finishes. A critical requirement of the project is ensuring that all transaction heights are fully compliant with ADAAG standards. The solicitation was posted on August 20, 2026, with a response deadline of September 15, 2026. Classified under NAICS code 337120, this project is designed for prime contractors managing facilities projects. Further details and submission portals are available through the OpenGov procurement system.

Institutional Furniture Manufacturing

POSTED

DEADLINE

Custom Technical Work Tables (CNET)This subcontract for the California Facilities, Planning and Management agency involves the fabrication and delivery of custom technical work tables. The contractor is responsible for producing 40 standard CNET work tables and 8 ADA-compliant CNET work tables, ensuring all units adhere to specific furniture specification sheets, layout references, and custom finishes. All deliverables must maintain strict BIFMA and UL compliance to meet industry safety and quality standards. The project falls under NAICS code 337127 and was posted on August 20, 2026, with a response deadline of September 15, 2026. The scope of work is designed to support prime contractors operating within facilities, planning, and management projects.

Institutional Furniture Manufacturing

POSTED

DEADLINE

Compartments, Cubicles, and PartitionsThis subcontract opportunity with the California agency Facilities, Planning and Management involves the supply and installation of modular partitions, cubicles, and compartments. The selected provider will be responsible for delivering and installing these systems for prime contractors on various agency projects. The contract falls under NAICS code 238390 and was posted on August 20, 2026. Interested parties must submit their responses by the deadline of September 15, 2026.

Other Building Finishing Contractors

POSTED

DEADLINE

Decorative Metal RailingsThis subcontract opportunity with the California Facilities, Planning and Management agency involves the fabrication, supply, and installation of architectural decorative metal railings. The selected provider will work with prime contractors to deliver completed railing systems for various agency projects, operating under NAICS code 238120. The solicitation was posted on August 20, 2026, with a response deadline of September 15, 2026. Interested parties can find further details and submission guidelines through the OpenGov procurement portal.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Specialty Flooring & CeilingsThis subcontract for Specialty Flooring and Ceilings is issued by the California agency for Facilities, Planning and Management. The selected provider will be responsible for supplying and installing specialty ceiling systems and flooring for prime contractors, specifically focusing on the installation of specialty ceiling grids, acoustic panels, and various specialty flooring materials. The project is categorized under NAICS code 238330. The solicitation was posted on August 20, 2026, and the deadline for responses is September 15, 2026. The primary objective of the contract is the successful delivery of completed specialty ceiling and flooring installations across designated project sites.

Flooring Contractors

POSTED

DEADLINE

Specialty Signage & Visual DisplaysThis subcontract for Specialty Signage and Visual Displays involves the fabrication, supply, and installation of dimensional lettering and visual display surfaces, including whiteboards, for prime contractors working on Facilities, Planning and Management projects in California. The selected provider is responsible for executing all work according to the specific signage schedule and ensuring all installations strictly adhere to ADAAG, ANSI A117.1, and NFPA 101 Life Safety Code standards. The opportunity is categorized under NAICS code 238990 and was posted on August 20, 2026, with a response deadline of September 15, 2026. All deliverables must be fully installed and compliant with the required safety and accessibility regulations.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Plastic Fabrications & Specialty SurfacesThis subcontract for Plastic Fabrications and Specialty Surfaces involves the supply and installation of custom plastic components for prime contractors working on projects under the California Facilities, Planning and Management agency. The scope of work includes specialized technical processes such as cold bending, hot bending, thermoforming, and drape forming of plastics, as well as the lamination of back-lit wall cladding, transaction tops, and countertops to various substrates. All deliverables must maintain UL compliance to ensure safety and quality standards. The contract falls under NAICS code 238130 and requires the provider to deliver fully installed specialty fabrications and countertops. Interested parties must respond by September 15, 2026.

Framing Contractors

POSTED

DEADLINE

Custom Furniture (FF&E) for the Technology & Health Building

Solicitation # 2026-063

Mount San Antonio College is soliciting bids for the procurement, fabrication, and installation of custom furniture, fixtures, and equipment (FF&E) for the new Technology and Health Replacement Building in Walnut, California. This project, part of a larger multi-phase facility expansion, involves providing specialized furniture for various environments, including lecture classrooms, laboratories, computer labs, faculty offices, and student communal spaces. Key deliverables include custom L-shaped reception counters for the SCE Pathways and Division Office suites, as well as a significant quantity of custom CNET work tables, including ADA-compliant versions. The scope of work encompasses space planning, furniture development, coordination of vendor proposals, and field installation. All furniture must adhere to 2010 ADA Standards for Accessible Design and is encouraged to incorporate environmental sustainability principles, such as using FSC-certified wood. The contract will be awarded to the lowest responsive and responsible bidder. Successful respondents must provide bid security and, upon award, execute both performance and payment bonds covering 100% of the contract price. Contractors are required to maintain specific insurance coverages, including commercial general liability, employers liability, and automobile liability, naming the District as an additional insured. Compliance with California prevailing wage laws and a 3% participation goal for Disabled Veteran Business Enterprises (DVBE) are mandatory. Technical requirements include strict material standards, such as the prohibition of particle board for primary work surfaces, and specific acclimation protocols for materials prior to installation. Bids must be submitted electronically through the Mt. SAC eProcurement Portal by the specified deadline in September 2026.

Institutional Furniture Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS