CUTTER SET, HOLE

CUTTER SET,HOLE
CUTTER SET, HOLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
KIT INCLUDES: 1 EA. DRILL MOTOR MAGNETIC
MOUNT, HOLE CAPACITY OF 2.0625 IN. DIA. AND
3 IN. DEPTH; 115 V, 60 HZ, 1 PH
1 EA. OF THE FOLLOWING BIT SETS: 0.4375
IN., 0.5000 IN., 0.5625 IN., 0.6250 IN., 0.6875
IN., 0.7500 IN., 0.8125 IN., 0.8750 IN., 0.9375
IN., 1.0000 IN., 1.0625 IN., 1.1250 IN., 1.3125
IN., 1.3750 IN., 1.4375 IN., 1.5000 IN., 1.5625
IN., 1.6250 IN., 1.6875 IN., 1.7500 IN., 1.8125
IN., 1.8750 IN., 1.9375 IN., 2.000 IN.
2IN CAP. DEPTH; 1 EA. #3 MORSE MACHINE ARBOR;
1 EA. ARBOR FOR HAND HELD TOOLS;
INTENDED FOR METALS UP TO 0.1875 IN. THK.;
1 EA. PILOT TO ACCOMMODATE HOLE CUTTERS;
AND ADAPTERS NEEDED TO FACILITATE USE OF THE
BITS IN THE DRILL MOTOR, HAND ARBOR, AND MACHINE
ARBOR.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
HOUGEN MANUFACTURING, INC 63672 P/N 10940
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE8E5-26-T-3094
SECTION B
PR: 7016967493 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016967493 0001 KT 1.000
NSN/MATERIAL:3455012455500
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB6071
FB6071 103 AW LGRDD
CP 860 292 2393
161 RAINBOW RD BLDG 2
EAST GRANBY CT 06026-9309
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB6071
FB6071 103 AW LGRDD
CP 860 292 2393
161 RAINBOW RD BLDG 2
EAST GRANBY CT 06026
US
M/F: (TCN) FB607153030028
RDD: 334
PROJ: TP 2
SUPP ADD: YBZ567 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
SPE8E5-26-T-3094
SECTION B
PR: 7016967493 PRLI: 0001 CONT’D
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:11/04/2025
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7016966676 0001 KT 1.000
NSN/MATERIAL:3455012455500
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W35CL1
W8SH MS ARNG FMS 7
14271 HWY 15
DECATUR MS 39327-9351
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W90NCT
W8SH MS ARNG FMS 7
14271 HWY 15
DECATUR MS 39327-9351
US
SPE8E5-26-T-3094
SECTION B
PR: 7016966676 PRLI: 0001 CONT’D
MARKFOR
W90NCT
W8SH MS ARNG FMS 7
14271 HWY 15
DECATUR MS 39327-9351
US
M/F: (TCN) W90NCT21160006
RDD:
PROJ: TP 3
SUPP ADD: W35KT6 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: 7Y
Need Ship Date:00/00/0000 Original Required Delivery Date:04/29/2022
SPE8E5-26-T-3094 NSN/Part Number: 3455-01-245-5500 Quantity: 1 KT Purchase Request: 7016966676QTY: 1 Delivery: 20 days ADO