Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CYLINDER ASSEMBLY, H

Active
SPE7M1-26-T-270RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a right-hand, single-end wheel cylinder assembly with a boot, designed for 15,000-pound trailers and used on the M416A1 quarter-ton cargo trailer, manufactured by ETS Hoking Corp under model MHU-110M. It is classified as a critical application item, requiring strict adherence to military and defense standards. Manufacturing must follow approved technical data packages referencing specific drawings and quality assurance provisions, with mandatory use of DCSC Drawing 16236 CS-2300-0001 for chemical agent resistant coatings and high-temperature finishes in place of Army drawing specifications. The item is cast using a metal casting process, requiring specialized tooling, and suppliers must comply with configuration change management procedures and deviation request protocols. Quality conformance is governed by zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively—unspecified attributes default to major. Acceptance requires zero non-conformances unless otherwise stated, and a Certificate of Quality Compliance must accompany each shipment. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special marking codes. Mercury or mercury-containing compounds are prohibited except for exempted functional uses such as batteries or instruments, which require secondary containment. The contract requires delivery of 221 units within 71 days FOB destination, with inspection and acceptance occurring at the destination. All items must be shipped to the DLA distribution facility in New Cumberland, Pennsylvania, with a required ship date of May 11, 2026, and are subject to a small business set-aside.

General Info

Procure 221 right-hand wheel cylinders for M416A1 trailers, compliant with military standards, delivered FOB New Cumberland by May 11, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

336340 - Motor Vehicle Brake System ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7M1-26-T-270R Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
SARA WILSON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CYLINDER ASSEMBLY,H
WHEEL CYLINDER ASSEMBLY.
RH,SINGLE END,W/BOOT,FOR TRAILER,15000 LB,ETS HOKING CORP,MODEL
MHU-110M. USED ON 1/4 TON, 2 WHEEL CARGO TRAILER, M416A1.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
THE ITEM DESCRIBED IN THIS SOLICITATION
IS DEFINED IN WHOLE OR IN PART BY ARMY
DRAWING(S). THESE DRAWING(S) MAY CONTAIN
A PAINT FINISHING REQUIREMENT. WHERE SUCH
REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING
16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE
MENTS OF THE ARMY DRAWING(S). THIS DRAWING
CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT
RESISTANT COATINGS (CARC), AND ADDITIONAL
INFORMATION RELATING TO HIGH TEMPERATURE
COATINGS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
SPE7M1-26-T-270R
SECTION B
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.
CRITICAL APPLICATION ITEM
BENDIX COMMERCIAL VEHICLE SYSTEMS LLC 06853 P/N 617856 TITAN DISTRIBUTION INC 1TUY2 P/N 9776
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 11686292 REVISION NR B DTD PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 11686293 REVISION NR A DTD PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 19207 11686267 REVISION NR A DTD 03/09/1990 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 11686267 REVISION NR B DTD 02/04/1994 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 19207 11686288 REVISION NR B DTD 04/22/1975 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12461890 REVISION NR B DTD 05/01/2023 PART PIECE NUMBER:
TDP Rev A Gen 1
SPE7M1-26-T-270R
SECTION B
IAW REFERENCE DRAWING NR 19207 12355846
REVISION NR F DTD 04/04/2007
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361 REVISION NR DTD 12/01/2017 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272 REVISION NR DTD 12/01/2017 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 11686284 REVISION NR A DTD 03/09/1990 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 19207 11686284 REVISION NR DTD 03/09/1990 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 11686267-2 REVISION NR DTD 12/16/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 11686288 REVISION NR B DTD 12/30/1992 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016265899 0001 EA 221.000
NSN/MATERIAL:2530001617575
DELIVERY (IN DAYS):0071
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
SPE7M1-26-T-270R
SECTION B
PR: 7016265899 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/11/2026 Original Required Delivery Date:08/13/2026
SPE7M1-26-T-270R NSN/Part Number: 2530-00-161-7575 Quantity: 221 EA Purchase Request: 7016265899QTY: 221 Delivery: 71 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336340
New
DIBBS
VALVE, RELAY, AIR PRESSU
Solicitation # SPE7L4-26-T-6224
The contract pertains to the procurement of a valve, relay, air pressure, identified by NSN 2530-01-470-5919, with a single unit requirement to be delivered within 20 days from the contract award. The item must conform strictly to source-controlled drawing specifications, with WABCO USA LLC as the sole approved manufacturer using part number 472 195 017 0 and revision D of the reference drawing dated November 21, 2023. Manufacturing requires a metal casting process with specific tooling, and offerors must ensure compliance with the DLA Master List of Technical and Quality Requirements, as applicable based on acquisition size and revision dates. All components must be produced under strict configuration control, and any deviation or variance request must follow formal engineering change proposal procedures. The item is classified as a critical application, and compliance with environmental restrictions is mandatory: ozone-depleting chemicals are prohibited without explicit authorization, and mercury or mercury-containing compounds are banned except in narrowly defined functional applications such as specified instruments or batteries, which must meet additional containment standards per NAVSEA guidance. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special markings for ZZ requirements and palletization per DLA standards, with hazardous material handling following IP025 guidelines. Delivery is FOB origin, inspection and acceptance occur at destination, and shipment must be via traceable means, excluding parcel post. The consignee is located at Fort Bragg, North Carolina, and the contract is issued under solicitation SPE7L4-26-T-6224 with a response deadline of August 21, 2026, and an original required delivery date of August 11, 2026.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336340
New
DIBBS
Pneumatic Tire Supply (NSN 2610015046590)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336340
New
DIBBS
Supply of Vehicular Mirror Heads (MIRROR HEAD, VEHICULAR)The contract obligates the supplier to manufacture, package, label, and deliver exactly 96 vehicular mirror heads annually, fully compliant with military specifications and hazardous materials labeling standards. All units must meet exacting defense requirements for functionality, durability, and safety, with labeling that adheres strictly to regulations governing the transport and handling of hazardous substances. The work is structured as a subcontract under the NAICS code 336340, which pertains to automotive body and trailer manufacturing, and is solicited by the Department of Defense through LSO Combat Vehicles and Armament. The opportunity was posted on August 9, 2026, with a firm response deadline of August 24, 2026, and performance is expected to support critical military vehicle systems without designated location constraints beyond the scope of delivery and compliance.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336340
New
DIBBS
Supply of Signal Horns (NSN 6350014841974)The contract mandates the manufacture, supply, and delivery of Signal Horns identified by NSN 6350014841974, with strict adherence to military specifications for design, performance, packaging, and labeling. All items must meet documented defense standards to ensure compatibility and reliability in operational environments. Deliveries are structured under FOB destination terms, placing responsibility for transportation risk and costs on the supplier until the goods reach the designated delivery point, where inspection by the receiving authority will verify compliance prior to acceptance. The work falls under NAICS code 336340, indicating classification within the Motor Vehicle Parts Manufacturing sector, and is issued as a subcontract under the Defense Logistics Agency, a component of the Department of Defense. The solicitation was posted on August 9, 2026, and the performance location details are unspecified, but the contract is referenced through the DLA’s award system with the contract identifier SPE7LX26FB5G8.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336340
New
DIBBS
Brake Shoe Set ManufacturingThe contract calls for the manufacture of internally actuated brake shoe sets that must fully comply with military and federal technical specifications, ensuring suitability for defense-related operational environments. The work is classified as a subcontract under NAICS code 336340, and the place of performance is designated as Fort Eustis with a zip code of 23604-5577, indicating the production and delivery must align with the logistical and operational requirements of the Department of Defense. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, requiring potential bidders to submit proposals within this narrow window to be considered for award. The contracting activity is managed by the Land Supply Chain under the Department of Defense, and while no specific set-aside provisions or point of contact are detailed, the emphasis on strict technical compliance underscores the mission-critical nature of the brake components. The contract does not outline subcontracting preferences or small business considerations, suggesting it is open to qualified manufacturers capable of meeting the rigorous performance standards required by military applications. The official solicitation can be accessed via the DIBBS portal using the provided link to obtain full technical documentation, evaluation criteria, and submission instructions.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336340
New
DIBBS
Commercial Item Supplier (NAICS Representation & Certification)
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336340
New
DIBBS
Oil Pan Supply (Military Specification)
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336340
New
DIBBS
Fluid Core Assembly Manufacturing and SupplyThe contract is for the manufacture and supply of CORE ASSEMBLY, FLUID units in strict adherence to National Stock Number specifications, encompassing end-to-end production, quality control verification, packaging, and documentation required to meet Department of Defense military logistics standards. The work falls under NAICS code 336340 and is executed as a subcontract under the Defense Logistics Agency, ensuring alignment with federal procurement protocols and defense supply chain requirements. All deliverables must comply with established military technical and logistical criteria to ensure interoperability and readiness across operational environments. The contract was posted on August 9, 2026, and is linked to the award SPE7LX21D0007 with delivery instruction SPE7L126FACL6, indicating a specific fulfillment pathway within the DLA’s procurement system. While no set-aside designation or geographic performance location is specified, the work is intended to support national defense logistics infrastructure, with full accountability for documentation, traceability, and compliance as mandated by defense contracting regulations. The contractor is responsible for ensuring timely delivery and adherence to all quality assurance protocols without deviation from the approved technical baseline.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336340
New
DIBBS
Rear Drum Hub Supply (NSN 2530010840444)The contract requires the supply of one rear drum hub assembly identified by NSN 2530010840444, strictly compliant with military specifications and associated delivery standards. This subcontract is part of the Department of Defense's procurement efforts under the NAICS code 336340, which pertains to motor vehicle body manufacturing, indicating the component's critical role in military vehicle systems. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, allowing suppliers a limited window to submit proposals. The procurement is managed by LSO Combat Vehicles and Armament, and performance must align with the operational needs of the defense sector, though specific delivery locations or point of contact details are not provided. Interested parties must comply with all technical and procedural requirements outlined in the official solicitation available through the DIBBS portal.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336340
New
DIBBS
Vehicular Suspension Component SupplyThe contract entails the supply of 50 units of vehicular suspension control arms designated by NSN 2530015801073, with full responsibility for proper packaging, labeling, and delivery to the specified destination. Inspection of the delivered items will occur upon arrival at the destination to ensure compliance with all technical and quality requirements. The solicitation is issued under the NAICS code 336340, indicating classification within the automotive parts manufacturing sector, and is structured as a subcontract within the Department of Defense procurement framework under the LAND SUPPLIER OPNS ENGINES organization. Delivery must be completed to the place of performance located in Texarkana, with a zip code of 75507-5000, and all activities must adhere to military specifications for component integrity and logistical handling. The opportunity was posted on August 9, 2026, with a response deadline set for August 20, 2026, allowing potential suppliers a limited window to submit offers.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336340
New
DIBBS
Radiator Core Manufacturing and AssemblyThe contract solicits the manufacture and assembly of radiator core units designated by NSN 2930-01-578-4859, requiring strict compliance with military specifications to ensure durability, thermal efficiency, and seamless integration into defense systems. The work must meet rigorous performance and quality standards appropriate for military operational environments, with all units produced to support sustained field use under demanding conditions. This is a subcontract opportunity reserved exclusively for small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, emphasizing support for small business participation in defense supply chains. The North American Industry Classification System code 336340 identifies the appropriate industry classification for this procurement. The solicitation was posted on August 9, 2026, with a response deadline of August 24, 2026, and is administered by the Land Supply Chain division of the Department of Defense. While no specific place of performance or point of contact is provided, the contract falls under the DLA’s procurement framework as referenced by the DIBBS portal link. The nature of the work requires manufacturing capabilities capable of fulfilling precise military-grade requirements, and interested parties must respond through the designated electronic platform prior to the deadline to be considered for award.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336340
New
DIBBS
Aircraft Tire Supply (Pneumatic, Commercial-Off-The-Shelf)The contract is for the supply of eight pneumatic aircraft tires with NSN 2620011373398, compliant with commercial-off-the-shelf specifications, ensuring they meet required performance and safety standards without custom military modifications. The tires must be properly packaged and labeled according to industry and government guidelines to ensure safe handling, identification, and traceability throughout the supply chain. Delivery is scheduled for Gulfport, Mississippi, with the vendor responsible for meeting all shipping logistics and timelines. This is a subcontract under the Department of Defense, administered by the Defense Logistics Agency, and classified under NAICS code 336340, which pertains to aircraft tire manufacturing. The solicitation was posted on August 9, 2026, and while no specific set-aside type is indicated, the award is part of a broader defense procurement effort focused on maintaining operational readiness through reliable commercial components.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 333996
New
DIBBS
RING, WEARING
Solicitation # SPE7M1-26-Q-1344
The contract is for the procurement of three wearing rings identified by NSN 4320-01-505-0957 under solicitation SPE7M1-26-Q-1344, with a firm fixed price and zero variance allowance for quantity. Delivery is required within 30 days after award, with FOB origin and inspection and acceptance occurring at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes. Packaging must use approved materials and methods including drying, protective wrap, and a designated unit container, and palletization must follow DLA standards. The shipment is to be delivered to DLA Distribution San Joaquin in Tracy, California, with transportation governed by specific DLA procedural notes. The contract prohibits intentional addition or direct contact of mercury or mercury compounds unless exempted for functional uses such as batteries, fluorescent lamps, or weapon system components, which must include secondary containment as specified by NAVSEA 5100-003D. Sourcing may require casting or forging, and if government tooling is not available, suppliers must submit a casting and forging assistance request. The item is part of a larger procurement under the Department of Defense, managed by the Maritime Supply Chain, with a primary point of contact at DLA and a mandatory response deadline in August 2026.
Fluid Power Pump and Motor Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334515
New
DIBBS
DETECTOR, RADIO FREQ
Solicitation # SPE7M1-26-T-270T
The contract is for the procurement of a Radio Frequency Detector with NSN 6625-00-877-7148 and part number 7017775627, under solicitation SPE7M1-26-T-270T, issued as a Women-Owned Small Business Set-Aside. The requirement specifies adherence to stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with the revision effective on the solicitation issue date controlling compliance. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. The detector must be free from intentional use of mercury or mercury-containing compounds except in limited functional applications such as batteries, fluorescent lights, or instrumentation approved by NAVSEA, with portable devices required to have shockproof construction and a secondary containment barrier. Use of Class I ozone-depleting substances is strictly prohibited in all phases of design, manufacturing, testing or cleaning without written approval from the Contracting Officer. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, under DLA Packaging Requirements, with no special marking required and palletization following RP001 guidelines. Hazardous materials handling, if applicable, must conform to IP025 standards. The item is to be delivered FOB origin, with inspection and acceptance occurring at destination, and a firm quantity of 47 units must be delivered within 164 days of contract award, with no variance allowed. Delivery is directed to Tinker AFB, Oklahoma, with an original required delivery date of February 4, 2027 and a need ship date of February 2, 2027. Each unit is priced at $47.00, totaling $2,209. The technical data referenced is incomplete, yet the delivered item must meet or exceed all cited specifications. The contract applies to the specific part numbers from approved manufacturers including Thales, Anritsu, Northrop Grumman, and Keysight Technologies.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
CALIBRATION CHECK KIT,
Solicitation # SPE7M1-26-T-270L
The contract is for the procurement of two Calibration Check Kits for gas monitors, identified by part number A-CAL-40-F-10027938-00-0-1002802 and NSN 6665-01-538-2224, under solicitation SPE7M1-26-T-270L. Delivery is required within 20 days to Fort Carson, Colorado, with FOB destination terms, zero variance allowed in quantity, and inspection and acceptance to occur upon delivery. The kits are subject to stringent packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including special marking codes and palletization per DLA standards, and must be shipped via traceable freight, excluding parcel post. The item may contain batteries and must comply with federal hazardous materials packaging standards if applicable, otherwise meet ASTM D3951 for commercial packaging. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The equipment is for government use only, with specific reporting codes and delivery instructions tied to the contract’s unique identifiers. The supplier must adhere to all labeling, packaging, and shipping directives outlined in the requirements, including the mandatory use of traceable shipping methods and shipment to the designated military delivery point at Fort Carson. The contract includes detailed commercial item data, unit of issue, and pricing structured under a single CLIN with two units at the quoted price, and specifies that the required delivery date is August 6, 2026, with a response deadline for the solicitation set for August 21, 2026. The solicitation is classified under NAICS code 334511 for manufacturing instruments and related equipment, under the Department of Defense, managed by the Maritime Supply Chain. The point of contact for inquiries is Michael Reese, and the item falls under a federal procurement framework governed by DoD acquisition policies and standardized logistics protocols.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
ELECTRICAL STANDARD
Solicitation # SPE7M1-26-T-270V
This contract outlines the technical, packaging, and hazardous material requirements for the procurement of a single electrical item with NSN 6625-01-366-3837 under solicitation SPE7M1-26-T-270V. The item, valued at one unit, must be delivered FOB origin within 20 days of the required delivery date of August 18, 2025, with no quantity variance permitted. All packaging and labeling must comply with MIL-STD-129 and DLA’s RP001 packaging standards, with non-hazardous materials packaged according to ASTM D3951 unless superseded by higher-priority DLA technical requirements. If the item contains hazardous materials as defined by FED-STD-313, the supplier must provide a fully completed Safety Data Sheet adhering to 29 CFR 1910.1200 and include the OSHA-compliant hazard communication label; failure to classify correctly may result in non-acceptance. The item must be shipped via traceable freight to the designated military facility at Camp Pendleton, California, and parcel post is strictly prohibited. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract specifies the point of contact, delivery instructions, and government-only identifiers for tracking and logistics use.
Bare Printed Circuit Board Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333914
New
DIBBS
PUMP, ROTARY
Solicitation # SPE7M1-26-Q-1347
This contract is for the procurement of four rotary pumps, identified by NSN 4320-01-503-1000 and part number MHC729, under solicitation SPE7M1-26-Q-1347. The item is classified as a critical application item and must comply with Item Unique Identification (IUID) requirements per MIL-STD-130 and the DFARS clause 252.211-7003. Pricing is firm fixed price with no tolerance for quantity variance—exactly four units must be delivered. The delivery schedule requires fulfillment within 30 days after delivery order issuance, with shipment originating from the supplier’s location and inspection and acceptance occurring at the destination. Packaging must strictly adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, and containment, and marking must follow MIL-STD-129 without any special labeling. Palletization must meet DLA’s packaging requirements. The item is to be delivered to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, Pennsylvania, 17070-5002, with transportation governed by DLA procedural notes C19 and C20. The contract references technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and controlled by the revision in effect on the solicitation issue date. The procurement is under NAICS code 333914 and falls under the Department of Defense, managed by the Maritime Supply Chain office. The primary point of contact is Kelsey Schlagenhaft, and the material need date is July 27, 2026. The solicitation was posted on August 10, 2026, with a response deadline of August 17, 2026.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATE
Solicitation # SPE7M1-26-T-270F
The contract pertains to the procurement of one gate valve, part number LHD-8430, with NSN 4820-01-270-4247, supplied by WILLIAM E WILLIAMS VALVE CORP. The item is classified as a critical application component and must strictly comply with DLA packaging and technical requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the valve, except for specified functional uses in batteries, lighting, instruments, weapon systems, or reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Delivery must occur within five days FOB origin to the destination inspection point, with zero tolerance for quantity variance. The valve must be packaged and palletized per DLA standards, identified with correct packaging codes, and shipped via traceable freight methods—parcel post is prohibited. Shipping instructions direct delivery to a U.S. Naval Station in National City, California, with a required delivery date of August 7, 2026. The contract is governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date, and all documentation must align with the authorized unit of issue per DoD guidelines. The solicitation number is SPE7M1-26-T-270F, with a response deadline of August 21, 2026, and primary point of contact is Misty Eckard of the Maritime Supply Chain under the Department of Defense.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
New
DIBBS
FILTER ELEMENT, INTAKE
Solicitation # SPE7M1-26-Q-1334
The contract pertains to the procurement of 1,572 filter elements for intake air cleaner systems, identified by NSN 4310-01-466-8495, under solicitation SPE7M1-26-Q-1334. Delivery is required within 180 days after contract award, with a total purchase request volume of 4,758 units indicating potential future call-offs or aggregated requirements. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the acquisition size. Any configuration changes or deviations must be formally submitted via an Engineering Change Proposal or a Request for Variance. The contractor is also required to overpack one copy of the manufacturer’s commercial manual covering operation, service, maintenance, and repair instructions. Government identification must be removed from any non-accepted supplies during handling. The contract is managed by the Department of Defense through the Maritime Supply Chain office, with the place of performance located in New Cumberland, Pennsylvania. All inquiries should be directed to the primary point of contact, Sara Wilson, at the provided email and phone number. The solicitation was posted on August 10, 2026, with responses due by August 20, 2026, and is administered through the DIBBS procurement system.

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-270U
This contract outlines the procurement of a single alternating current motor designated by NSN 6105-01-500-4242 and part numbers 872403201 and 801625-577-4 from Alfa Laval Inc and ABB Motors & Mechanical Inc respectively. The item is classified as a critical application with strict compliance requirements, including adherence to DLA packaging standards under RP001 and MIL-STD-2073-1E specifications for preparation, packaging, and marking in accordance with MIL-STD-129 without special markings. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the motor unless part of approved exceptions such as functional components in batteries, fluorescent lamps, or instruments, and where such items must meet NAVSEA 5100-003D requirements for shock resistance and secondary containment. Delivery is FOB origin with a strict quantity variance of plus or minus zero percent, and inspection and acceptance occur at the destination. The delivery window is 164 days from the contract award, with a required ship date of February 2, 2027 and an original delivery deadline of September 6, 2027. The sole delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation under SPE7M1-26-T-270U was issued as a total small business set-aside under NAICS code 335312, closed to responses by August 21, 2026, and is managed by the Department of Defense’s Maritime Supply Chain through the DLA. All technical and quality standards referenced are governed by the current revision of the DLA Master List of Technical and Quality Requirements as of the solicitation or award date, depending on acquisition size.
Motor and Generator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
SEAT, VALVE
Solicitation # SPE7M1-26-Q-1004
The contract is for the procurement of 41 units of a valve seat identified by NSN 4820-01-551-2424, issued under solicitation number SPE7M1-26-Q-1004 by the Department of Defense through the Maritime Supply Chain. The solicitation was posted on August 10, 2026, with a response deadline of August 20, 2026, and the delivery requirement is set for 230 days after award. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The procurement is categorized as a federal action with no set-aside designation, and the primary point of contact for inquiries is Sara Wilson, reachable via email at sara.1.wilson@dla.mil or phone at 4457371625. The solicitation is accessible through the DIBBS website for further details and submission.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7M1-26-Q-1311
The contract specifies the procurement of 33 units of a globe valve with a copper alloy body and a 1.0 inch size, identified by the NSN 4820-01-106-2406. The item is classified as a critical application component and must conform to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must follow DLA’s RP001 requirements and MIL-STD-129 for labeling and marking, with palletization adhering strictly to DLA packaging protocols. The valve must be delivered in firm fixed price terms with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Delivery is required within 150 days after award, with FOB origin terms applying. The required packaging and unit of issue are specified, and the item must be shipped to DLA Distribution Depot Hill at Hill AFB, Utah, per the provided shipping and parcel post addresses. The purchase request number is 7017049162, with a scheduled delivery date of December 19, 2026. The contract is issued under solicitation SPE7M1-26-Q-1311, with responses due by August 20, 2026, and points of contact are provided through the DLA procurement system.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M1-26-T-270Q
This contract specifies the procurement of two power supply units, part number XPF60-20S with NSN 6120-01-724-1912, supplied by AMETEK INC under solicitation SPE7M1-26-T-270Q. The items must be delivered within 206 days from the contract date, with a firm delivery deadline of March 16, 2027, and are subject to zero tolerance for quantity variance. Delivery is FOB origin and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with compliance tied to the revision in effect on the solicitation or award date. Packaging must conform to MIL-STD-2073-1E, including specific preservation methods, wrap materials, and unit containment, with marking fully compliant with MIL-STD-129 and no special markings required. Palletization follows DLA packaging standards. The supplier must hold a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment, and the item is designated as a critical application. Covered Defense Information applies, requiring adherence to data protection protocols. The unit of issue is each, priced at $2.00 per unit. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20, with all deliveries directed to the specified DDSP New Cumberland facility.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334515
New
DIBBS
LEAD, TEST
Solicitation # SPE7M1-26-T-270C
The contract pertains to the procurement of two units of LEAD, TEST with NSN 6625-00-042-4430 under solicitation SPE7M1-26-T-270C, issued by the Department of Defense through the Maritime Supply Chain organization. Delivery is required within 20 days after order, with responses due by August 21, 2026, and the solicitation was posted on August 10, 2026. Full and open competition is applicable, and the NAICS code 334515 indicates the industrial classification. The item involves technical data subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals within the U.S., with compliance mandated under DFARS 252.225-7048. Access to this controlled data is restricted to contractors approved by DLA, requiring JCP certification, completion of specific DOD export training, and approval via the DLA questionnaire. Additionally, the contract incorporates DLA packaging requirements, cybersecurity requirements mandating CMMC Level 2 certification for third-party assessors, and provisions for removing government identification from non-accepted supplies. The place of performance is Keyport, WA, with Michael Reese listed as the primary point of contact.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details