Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CYLINDER ASSEMBLY, R

Active
SPE7M4-26-T-290TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single commercial off-the-shelf cylinder assembly, part number 15S002386JJ0623, with NSN 2040-01-714-3700, procured by the Department of Defense’s Fluid Handling Division under solicitation SPE7M4-26-T-290T. Delivery is required within 20 days FOB origin with zero variance in quantity and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede other specifications including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001 guidelines. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval. The unit of issue is each, with a total price of $1.00, and shipment must be sent via the fastest traceable freight method—parcel post is explicitly forbidden. The delivery address is in Virginia Beach, and the required delivery date is July 27, 2026. Only authorized substitutes approved by the specification requirements may be used, and all markings and labeling must conform to federal standards.

General Info

One cylinder assembly, part 15S002386JJ0623, delivery by July 27, 2026, to Virginia Beach, FOB origin, $1.00.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

114119 - Other Marine FishingView NAICS

Place of Performance

BLDG 1265, VIRGINIA BEACH, VA, 23459, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CYLINDER ASSEMBLY,R
CYLINDER ASSEMBLY,REACTION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
BARNES GROUP INC. 74197 P/N 15S002386JJ0623
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017659200 0001 EA 1.000
NSN/MATERIAL:2040017143700
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7M4-26-T-290T
SECTION B
PR: 7017659200 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N4365A
MESG TWO
2465 GUADALCANAL RD STE 14
BLDG 1265
VIRGINIA BEACH VA 23459
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N4365A
MESG TWO
1320 BARNSTABLE COUNTY
BLDG 3090
VIRGINIA BEACH VA 23459
US
M/F: (TCN) N4365A62011320
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 24 FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:07/27/2026
SPE7M4-26-T-290T NSN/Part Number: 2040-01-714-3700 Quantity: 1 EA Purchase Request: 7017659200QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 114119
New
DIBBS
MODIFICATION KIT, MISCE
Solicitation # SPE7M4-26-T-290A
This contract requires the delivery of a modification kit for miscellaneous ship applications, identified by NSN 2090016926161, with a total quantity of five units at a unit price of five dollars, resulting in a total contract value of twenty-five dollars. The item is classified as a critical application and must be delivered FOB origin within 187 days after award, with a specified delivery date of February 14, 2027. Inspection and acceptance occur at the destination, specifically at the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and must comply with FAR 52.246-2. Packaging must adhere to MIL-STD-2073-1E, including Appendix D for kits, with detailed preservation and packaging data specified by code values that require contractual definition. Marking must follow MIL-STD-129 with special codes ZZ indicating contract-specific requirements, and palletization must conform to DLA’s RP001 packaging standards. The contract prohibits the use of Class I ozone-depleting chemicals and mandates approval for any substitute chemicals unless explicitly authorized by the specification. Compliance with hazardous material labeling under 29 CFR 1910.1200 and military standards is required, and all items must avoid the inclusion of covered defense telecommunications equipment as prohibited by DFARS 252.204-7018. Contractors must submit electronic invoices through Wide Area WorkFlow and comply with cybersecurity obligations including safeguarding covered defense information per DFARS 252.204-7012 and NIST SP 800-171 assessment requirements. Technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, and contractors must provide their Unique Entity Identifier and CAGE code, representing their small business status and compliance with socioeconomic programs where applicable. Employment eligibility verification, equal opportunity for workers with disabilities, sustainable products, and prohibition of unauthorized obligations are governed by applicable FAR and DFARS clauses. The contracting officer is Rory O’Reilly of the Fluid Handling Division, Department of Defense, and all proposals must be submitted electronically via DIBBS by August 10, 2026.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 114119
New
DIBBS
MODIFICATION KIT, MISCE
Solicitation # SPE7M0-26-T-020L
This contract pertains to a modification kit designated by NSN 2090-01-653-7341 and purchase request 7017643737, with a quantity of one unit to be delivered within five days to the Mobile Diving and Salvage Unit 1 at Pearl Harbor, Hawaii. The delivery must be made FOB destination with a strict zero tolerance variance, and both inspection and acceptance occur at the delivery point. All items must comply with DLA packaging requirements, including MIL-STD-2073-1E Appendix D for kits, and marking per MIL-STD-129, with no use of ozone-depleting chemicals under any circumstances. Preservation and packaging materials must be specified per approved methods, and palletization must follow DLA guidelines. Shipments are to be sent by the fastest traceable means, explicitly prohibiting parcel post, and must use the provided government shipping address and DLA-provided tracking identifiers. The contract enforces technical and quality standards referenced from the DLA Master List, with version control tied to the solicitation or award date depending on acquisition scale. The solicitation number SPE7M0-26-T-020L was posted on July 28, 2026, with responses due by August 10, 2026, and the original required delivery date is July 29, 2026. The item is categorized under NAICS code 114119 and issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The primary point of contact is Audrey Acuna, and the shipment must include the provided supplier address, project code WK5 TP 1, and government tracking identifiers. Special marking and packaging directives, including the use of specific preservation methods and container types, are mandatory. The contract imposes no substitutions for restricted materials unless explicitly approved and requires full adherence to DLA logistical and compliance protocols for federal procurement.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 114119
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7M4-26-T-261P
The contract pertains to the procurement of 35 mounting plates identified by NSN 2040-01-716-3560 under solicitation SPE7M4-26-T-261P, issued by the Defense Logistics Agency’s Fluid Handling Division. Delivery is required within 200 days of order placement, with a specified delivery date of February 13, 2027, under FOB Origin terms to the designated receipt facility in Tracy, California. The item is classified as a restricted source requiring engineering source approval from the government design control activity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must conform to MIL-STD-129 for labeling and 2D Data Matrix barcode application, with palletization following RP001 DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance allowed in quantity. The contract prohibits the intentional use of ozone-depleting substances and mercury or mercury-containing compounds in manufacturing or processing, except for specific exempted applications such as batteries, fluorescent lighting, weapon systems, and instruments specified by NAVSEA, with portable mercury-containing devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Compliance with hazardous material handling is enforced through DFARS clauses, including mandatory hazard communication labeling under 29 CFR 1910.1200, submission of Safety Data Sheets, and notification of any radioactive materials exceeding specified activity thresholds. Contractors must maintain active SAM registration, represent their small business status and socioeconomic classifications accurately, and disclose any covered defense telecommunications equipment per DFARS 252.204-7018. Invoicing must occur electronically via WAWF, and all deliveries are subject to destination inspection and acceptance. The contract incorporates multiple FAR and DFARS clauses governing contract type, cybersecurity safeguarding of covered defense information, trafficking in persons, employment eligibility verification, whistleblower protections, and restrictions on compensation of former DoD officials, with no options, price data, or award basis specified in the solicitation.
FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in about 10 hours
View Details
NAICS: 114119
New
DIBBS
PANEL, FLOOR, WATERCR
Solicitation # SPE7M4-26-T-286R
The contract is for the procurement of two units of a floor panel designed for watercraft, identified by NSN 2040-01-715-9887, under solicitation SPE7M4-26-T-286R, with a total small business set-aside and a NAICS code of 114119. Delivery is required within 20 days after order, with a response deadline of August 6, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. All items must comply with DLA packaging standards and must not contain any Class I ozone-depleting chemicals; any substitute chemicals must be submitted for approval unless explicitly authorized. Government identification must be removed from non-accepted supplies. The item involves technical data subject to ITAR or EAR export control, prohibiting disclosure to foreign persons without prior authorization, and only DLA contractors with approved JCP certification, completed training, and DLA approval may access such data. The place of performance is Camp Lejeune, North Carolina, with Rory O’Reilly designated as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 114119
New
DIBBS
BLADE, WINDSHIELD WI
Solicitation # SPE7M4-26-T-286H
This contract pertains to the procurement of one unit of a windshield wiper blade, identified by part number CC-52412 and NSN 2090-01-700-1318, supplied by CORNELL-CARR CO., INC. Delivery is required within 20 days from contract award, with shipment FOB origin and no tolerance for quantity variance. All items must comply with DLA’s packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. The use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative substances must be pre-approved unless expressly permitted by the specification. Packaging and palletization must adhere to DLA’s procurement requirements, and shipment must be sent by the fastest traceable method, explicitly excluding parcel post. The delivery destination is Lewis McChord, Washington, with the government point of contact for inquiries being Rory O’Reilly. The contract is issued under solicitation SPE7M4-26-T-286H, with an original required delivery date of July 21, 2026, and the solicitation was posted on July 26, 2026, with responses due by August 6, 2026. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, and all provisions are binding regardless of conflicting specification language.
FLUID HANDLING DIVISION

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 114119
New
DIBBS
HOOK, BOAT
Solicitation # SPE7M4-26-T-275Z
The contract pertains to the procurement of a 12-foot-long boat hook with a minimum handle diameter of 1-9/16 inches, manufactured via metal casting and requiring specialized tooling for production. The item is identified by NSN 2040-00-268-9252 and part number H20402689252, referenced in technical documents dated back to 1963 and 1965, and is classified as a critical application item. The specification mandates strict adherence to DLA packaging standards, including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with explicit prohibition of plastic packaging materials and mercury or mercury-containing substances in any stage of production, preservation, or packaging, except for specified functional uses like batteries or instruments as defined by NAVSEA. Ozone-depleting chemicals are strictly forbidden, and any substitute materials must be approved prior to use. The contract requires 79 units to be delivered FOB origin within 99 days, with a final ship date of July 23, 2026, and an original delivery deadline of February 5, 2027. No quantity variance is permitted, and inspection and acceptance occur at the destination. Delivery must be made to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The item is procured under solicitation SPE7M4-26-T-275Z, classified as full and open competition, with pricing set at $79.00 per unit for a total contract value of $6,241.00. All technical and quality requirements are governed by the DLA Master List, and packaging logistics must comply with RP001 and IP056 directives, including palletization and preservation methods as outlined. Primary point of contact for inquiries is Blake Tushar with the Fluid Handling Division of the Department of Defense.
FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 114119
New
DIBBS
BLADDER, ACCUMULATOR, HY
Solicitation # SPE7M4-26-T-280U
The contract specifies the procurement of one bladder accumulator hydraulic unit, identified by NSN 2090-01-473-0955 and part number 95-00500 from Young Engineering & Manufacturing, Inc., with a required delivery within 168 days of contract award. Delivery is FOB origin and inspection and acceptance occur at the destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, using the specified packaging code U and no special marking. The shipment is addressed to DLA Distribution at the New Cumberland, Pennsylvania facility, and transportation logistics follow DLA procedural notes C19 and C20. The item is designated as a critical application item and is subject to strict prohibitions against intentional incorporation or direct contact with mercury or mercury-containing compounds, except for approved functional uses such as in batteries, lights, sensors, or weapons systems as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements for all applicable technical and quality standards identified by R or I numbers, with the applicable revision determined by the solicitation or award date based on acquisition size. The solicitation number is SPE7M4-26-T-280U, posted on July 23, 2026, with responses due by August 3, 2026, and the original required delivery date was September 1, 2026, with a revised ship date of January 19, 2027.
FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 114119
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7M4-26-T-282J
This contract governs the supply of a mounting plate identified by NSN 2040-01-716-3573 and part number 8931716 REVPC NO 9, with a quantity of 10 units to be delivered in 168 days under solicitation SPE7M4-26-T-282J. The item must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere strictly to MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific authorized uses such as batteries, fluorescent lights, sensors, weapon systems, and naval chemical reagents, with portable devices requiring shock-proof design and a secondary containment boundary as defined by NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any manufacturing, cleaning, or testing process is strictly forbidden without prior written approval from the contracting officer, though this restriction does not apply to commercial items or part-numbered only components. The unit of issue is each, with a unit price of $10.00 and a total contract value of $100.00. The original required delivery date is January 11, 2027, with a need ship date of January 19, 2027, and the contract is managed by the Fluid Handling Division under the Department of Defense, with Rory O’Reilly listed as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 114119
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7M4-26-T-282H
This contract is for the procurement of a mounting plate identified by NSN 2040-01-716-3488 and part number 8931716 Rev PC No 37, with a quantity of 16 units to be delivered within 168 days under contract SPE7M4-26-T-282H. Delivery is FOB origin and inspection and acceptance occur at the destination, with no tolerance for quantity variance. The item is classified as a restricted source requiring government engineering source approval, and it must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Ozone depleting chemicals are strictly prohibited, and any substitute materials must be submitted for approval unless explicitly authorized by the specifications. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes. Palletization adheres to DLA standards, and the item must be delivered to the specified DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each, at a unit price of $16.00, for a total contract value of $256.00. The need ship date is January 19, 2027, with the original required delivery date set for January 29, 2027. All transportation details and logistics are governed by DLA procedural notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 114119
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7M4-26-T-282S
This contract outlines the procurement of a mounting plate identified by NSN 2040017169948 and part number 8931716 REVPC NO 42, with a quantity of eight units to be delivered within 168 days from the contract award date. The item is classified as a restricted source requiring formal engineering approval from the government design control activity, and it must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The product is subject to strict prohibitions against the use of Class I ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly authorized by the specifications. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with marking conforming to MIL-STD-129 and no special marking codes applied. The goods are to be delivered FOB origin, inspected and accepted at destination, and shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. The delivery schedule mandates shipment no later than January 19, 2027, with an original required delivery date of December 16, 2026, and no quantity variance is permitted. The unit of issue is each, priced at $8.00 per unit, totaling $64.00, under solicitation SPE7M4-26-T-282S, issued by the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 114119
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7M4-26-T-282R
The contract solicitation SPE7M4-26-T-282R calls for the procurement of 27 mounting plates identified by NSN 2040017163974, with a unit price of $27.00 and a total value of $729.00 for this line item, though the overall estimated contract value across multiple CLINs reaches approximately $29,408.99. Delivery is required within 168 days after order placement, with a need ship date of January 19, 2027 and an original delivery deadline of February 11, 2027. All items must be delivered FOB origin and inspected and accepted at the destination facility located at New Cumberland, Pennsylvania. Packaging must strictly adhere to MIL-STD-2073-1E using preservation method 31 (clean/dry), with no preservation materials applied, and each item must be individually wrapped in an EA format and contained within a fiberboard unit container and intermediate fiberboard box. Palletization must comply with DLA’s RP001 requirements and marking must follow MIL-STD-129 with no special marking codes applied; barcoding is mandatory on all packaging levels. The item is designated for distribution through DLA’s New Cumberland facility under the Freight Shipping Address provided. The contract imposes strict regulatory and safety controls, including a comprehensive prohibition on the intentional addition of mercury or mercury-containing compounds in any hardware or supply unless specifically exempted for functional uses like batteries, fluorescent lamps, sensors, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in design or manufacturing is prohibited without express written approval from the Contracting Officer, and this restriction overrides any conflicting specification requirements except for commercial items as defined in FAR 11.001. Hazardous materials must be labeled in accordance with 29 CFR 1910.1200, and contractors must submit Safety Data Sheets, comply with 252.223-7006 (prohibition of toxic/hazardous material storage and disposal), and 252.223-7008 (hexavalent chromium prohibition). Compliance with 252.240-7997
FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 114119
New
DIBBS
WINDSHIELD WIPER AS
Solicitation # SPE7M4-26-T-279R
The contract is for the procurement of three windshield wiper assemblies identified by NSN 2090-01-509-6731 under solicitation SPE7M4-26-T-279R, issued by the Department of Defense’s Fluid Handling Division. The requirement is set aside for Service-Disabled Veteran-Owned Small Businesses and mandates compliance with DLA packaging and technical standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The items must be delivered FOB origin within 168 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for specific exceptions like functional use in batteries, instrumentation, or weapons systems, and all portable devices containing mercury must include shock-resistant design and secondary containment per NAVSEA 5100-003D. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, and the supplier must adhere to DLA’s authorized unit of issue and transportation requirements outlined in DLAD Proc Notes C19 and C20. The original required delivery date is January 9, 2027, with a needed ship date of January 19, 2027, and the contract value for three units at $3.00 each totals $9.00.
FLUID HANDLING DIVISION

POSTED

7 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-291C
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SHOP EQUIPMENT, TIRE
Solicitation # SPE7M4-26-T-290S
This contract pertains to the procurement of one unit of shop equipment, specifically a tire, identified by NSN 4940-01-668-8502 and purchase request 7017659115, with a required delivery within 20 days of contract award. The item must be delivered FOB origin and inspected and accepted at the destination, with no variance allowed in quantity. Packaging and labeling must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s packaging requirements, with all documentation and markings following DLA Master List Technical and Quality Requirements, which take precedence. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. The contract mandates shipment via traceable freight methods only—parcel post is prohibited—and designates the delivery destination as a military facility at Camp Lejeune, North Carolina, with specific address and contact information provided. The supply is governed by technical standards referenced through R and I numbers incorporated from DLA’s official master list, and all compliance obligations, including government identification removal from non-accepted items, are binding. The solicitation number is SPE7M4-26-T-290S, with a response deadline of August 10, 2026, and the original required delivery date is July 27, 2026.
Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
NUT, TUBE COUPLING
Solicitation # SPE7M3-26-T-7740
The contract is for the procurement of two steel tube coupling nuts, cadmium plated, with a nominal tube outer diameter of 1/4 inch, manufactured to meet MIL-DTL-18866K and referenced under part number MS39210-3. The items are classified as a critical application product and must comply with stringent military standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirements. Sampling and inspection follow zero-defect acceptance criteria per MIL-STD-1916 or comparable zero-based plans, with unspecified attributes treated as major and verified at AQL 1.0. The items are prohibited from containing mercury or ozone-depleting chemicals unless explicitly exempted, and any substitute materials require prior approval. Delivery is FOB origin within 20 days to a military facility in Taiwan, with no variance allowed in quantity. The contract enforces full and open competition and references the DLA Master List of Technical and Quality Requirements for all technical and quality stipulations. The NSN is 4730-00-052-9876, the purchase request number is 7017671486, and the delivery deadline is August 3, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-291J
This contract specifies the procurement of a nonmetallic hose assembly with part number 89819-TTNAV and NSN 4720-01-734-5813, requiring three units to be delivered within 147 days from the contract award. The item is designated as a critical application item and includes mandatory compliance with DLA technical and quality requirements referenced through R and I numbers from the DLA Master List. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and the material is subject to specialty metal requirements under DFARS clauses 252.225-7008, 252.225-7009, and 252.225-7010 if the contract exceeds the Simplified Acquisition Threshold. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, respectively, with no special marking codes applied. Palletization follows DLA packaging guidelines, and delivery is FOB origin to the specified DLA distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance are required at the destination point, with zero tolerance for quantity variance. The contract solicitation number is SPE7M4-26-T-291J, issued by the Department of Defense’s Fluid Handling Division, with a response deadline of August 10, 2026, and an original required delivery date of January 23, 2027.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE7M4-26-T-290V
The contract pertains to the procurement of a pin, straight, headless item with NSN 5315-01-164-5823 and part number 19221-1, supplied by EATON AEROSPACE LLC, under solicitation SPE7M4-26-T-290V. One unit is required to be delivered within 20 days FOB origin, with no tolerance for quantity variance. All deliveries must be made to the specified military receiving location at Fort Irwin, California, using the fastest traceable shipping method—parcel post is prohibited. Packaging must comply with ASTM D3951, while marking and labeling are governed by MIL-STD-129 and the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. The item is classified as a critical application product and must be marked in accordance with MIL-STD-130N. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitute chemicals require prior approval unless explicitly permitted by the specification. The unit of issue is each, and palletization must adhere to DLA’s packaging requirements. Delivery is due by July 27, 2026, and all government-specific identifiers and codes, including the RDD, DODAAC, and procurement request numbers, must be accurately applied to the shipment for proper tracking and receipt.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7M4-26-T-291G
This contract specifies the procurement of 20 helical compression springs with the NSN 5360-01-392-0755 from Vickers Inc, Sterer Engineering & Manufacturing Division in Los Angeles, CA. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and the use of Class I ozone-depleting chemicals is strictly prohibited in manufacturing or incorporation, overriding any conflicting specification requirements unless the substitute chemicals are explicitly authorized or approved. The contract was issued under solicitation number SPE7M4-26-T-291G with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The delivery schedule requires completion within 147 days after award, with performance location designated as Hill AFB, Utah, 84056-5734. The purchasing agency is the Department of Defense’s Fluid Handling Division, and the primary point of contact is Rory O’Reilly, reachable via email and phone provided. This solicitation falls under NAICS code 332613 and is classified as a federal procurement activity.
Spring Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-290Y
This contract specifies the procurement of an air duct hose designated by NSN 4720016448140, with a single unit required and a delivery timeline of 140 days FOB destination. The item is classified as a critical application item and must comply with MIL-PRF-32107/12, Revision D dated 05/31/2022, along with referenced quality assurance provisions including QAP 16236 and MIL-PRF-32107 Supplement 1. Shelf life is strictly defined at 60 months with no extension permitted, and the item is labeled as Type I under shelf-life code S. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with palletization following DLA packaging requirements. The hose must be free of ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specific exempted uses such as in batteries, fluorescent lights, or instrument controls specified by NAVSEA, which must include secondary containment if portable. Inspection and acceptance occur at origin, and the contractor must perform first article testing as required under FAR 52.209-3, with a separate line item designated for this purpose, though no separate charge is assumed unless explicitly quoted. Delivery is directed to USS GERALD R FORD CVN 78 at FPO AE 09523 via fastest traceable means, with parcel post explicitly prohibited. All technical and quality requirements are governed by the DLA Master List referenced in the document, and any substitution of materials requires prior approval. The contract prohibits any use of government identification on rejected items and applies to full and open competition with no set-aside.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-291A
A 2-1/2 inch nonmetallic hose, 35 feet in length, is being procured under specification MIL-DTL-22240G with a modified weight test requirement of 500 pounds instead of the standard 650 pounds. The product must comply with stringent quality and technical requirements referenced through the DLA Master List and includes controlled packaging, inspection, and acceptance protocols at origin, with shipment following MIL-STD-2073-1E and MIL-STD-129 standards. The item carries a non-extendable 120-month shelf life classified as Type I (Code W) and must be marked accordingly. Ozone-depleting chemicals and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted and approved, and all substitute materials require prior authorization. The contract mandates full and open competition under a Service-Disabled Veteran-Owned Small Business Set-Aside, with adherence to ISO 9001 and higher-level quality requirements including configuration control, engineering change proposals, and zero-defect sampling per MIL-STD-1916 or equivalent. First article testing is required for one unit, and failure to price this line item will result in no separate charge being assumed. Delivery is due within 333 days FOB origin to the Defense Logistics Agency in San Diego, with no variance allowed in quantity. The procurement is governed by clauses addressing inspection, acceptance, packaging, and transportation, and all documentation and marking must align with current DLA and DoD directives.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 313320
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-290Z
This contract pertains to the procurement of a single nonmetallic hose assembly, sized at 6 inches and 20 inches in length, manufactured to meet the military specification for high-temperature, medium-pressure tetrafluoroethylene hose used in UH-60 helicopter applications. The item is identified by NSN 4720-00-147-1696 and is listed on the Qualified Products List, requiring compliance with approved manufacturers and technical standards including MIL-DTL-25579H, MS8006D, and MIL-STD-130N for marking and configuration control. The hose must not contain any Class I ozone-depleting chemicals, and any substitution of materials must be pre-approved. Technical and quality requirements referenced from the DLA Master List supersede all other specifications, and packaging must adhere to ASTM D3951 while aligning with MIL-STD-129 labeling and DLA-specific packaging directives, including palletization per RP001. The item is designated as a critical application component with strict compliance requirements. Delivery is required within ten days of contract award, FOB origin, with zero percent variance allowed in quantity, and inspection and acceptance occur at the destination. The sole unit is to be delivered to the U.S. Army SSA Bulgaria facility at Novo Selo Training Area, Building 7000, Mokren 8994, Bulgaria, under Shipment RDD 555, following DLA Transport Procedure Notes C19 and C20. Marking must include the contract number SPE7M4-26-T-290Z, procurement request 7017659456, and government identifier WK4GDV62090174. The solicitation was issued on July 29, 2026, with responses due by August 10, 2026, and the original required delivery date is July 31, 2026. The contract is under the Department of Defense, Fluid Handling Division, and all deliverables must conform to DLA’s authorized unit of issue and procurement protocols.
Fabric Coating Mills

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-290X
The contract is for one unit of a hose and air duct, identified by NSN 4720-01-644-8032, under solicitation SPE7M4-26-T-290X, with a required delivery within 20 days of award and delivery FOB destination. The product must comply with technical specifications outlined in MIL-PRF-32107/3 and MIL-PRF-32107 Sup 1, as defined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging must adhere to ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement. The item is subject to full and open competition, with zero tolerance for quantity variance, and inspection and acceptance occur at the final destination. The delivery address is USS GERALD R FORD CVN 78, FPO AE 09523, with shipment required via fastest traceable means, excluding parcel post, and transportation logistics governed by DLAD PROC NOTES C19 and C20. The required delivery date is July 27, 2026, and the contract includes government-only fields for internal tracking and disposition. The point of contact for the solicitation is Blake Tushar of the Department of Defense’s Fluid Handling Division.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-291M
Offerors must comply with strict requirements regarding telecommunications equipment and domestic sourcing, including adherence to the Berry Amendment, Buy American Act, and DFARS clauses that restrict foreign-sourced materials, with a reduced threshold of $150,000 requiring full disclosure for non-domestic content. Submission of quantity ranges is strongly encouraged due to fluctuating demands, allowing buyers to consolidate or adjust orders without re-solicitation, though this does not apply to Auto IDC. All offerors must represent they will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit certifications for eligibility under specific small business categories as outlined in FAR provisions. Access to the Vendor Shipment Module is transitioning to require registration via the Account Management & Provisioning System, with mandatory schema updates for WebServices users to maintain shipping capabilities. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and any offer including AM-produced items will be deemed ineligible. Offerors unable to quote by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or explanation to avoid assumption of non-responsiveness. The solicitation is for 309 O-rings under NSN 5331-00-800-8390, with a delivery requirement of 256 days ADO, and responses are due by August 10, 2026. APEX Accelerators offer free support for businesses seeking to enter government contracting.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-291B
The contract specifies the procurement of a non-metric hose assembly with NSN 4720-01-571-5016 and part number 040505-601, quantity of two units, under solicitation SPE7M4-26-T-291B. Delivery is required within 161 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must follow DLA Packaging Requirements for Procurement (RP001), with all technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and must adhere to requirements for handling covered defense information. The unit price is $2.00 per unit, with no variance allowed in quantity. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and original delivery due by January 26, 2027. Transportation details are governed by DLAD Proc Notes C19 and C20. The contract is issued under the Department of Defense’s Fluid Handling Division, with Blake Tushar listed as the primary point of contact, and falls under NAICS code 326220 for rubber product manufacturing.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details