CYLINDER ASSEMBLY, REAC
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract pertains to the procurement of two cylinder assembly, reaction units under solicitation SPE7L4-26-T-5655, with a firm delivery deadline of ten days from award and FOB origin terms. The item is identified by NSN 2540-01-624-9487 and must be manufactured and packaged strictly in accordance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards, with no special marking required. Packaging must comply with palletization guidelines and hazardous materials shipping protocols, and all shipments must be sent via the fastest traceable means, excluding parcel post. The delivery destination is W8071J in Annville, Pennsylvania, with inspection and acceptance occurring at the point of delivery. No quantity variance is permitted, and a Certificate of Conformance is mandatory. The product is subject to strict environmental restrictions prohibiting the use of Class I ozone-depleting chemicals, which overrides any conflicting specification requirements unless approved substitutes are submitted and authorized. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. Configuration changes require formal Engineering Change Proposals or variance requests, and removal of government identification from non-accepted supplies is prohibited. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stipulated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The component drawings referenced include revisions dated between 2015 and 2023 under part numbers 5B5M3 11B5190831, 11B5190878, and 11B5190879. The contract is managed by the Department of Defense through the LSO Combat Vehicles and Armament office, with primary contact at DLA’s procurement division.
General Info
Agency
NAICS
Place of Performance
BLDG 14 26 FIRE LANE, ANNVILLE, PA, 17003-0000, USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Response Deadline
Organization & Contact Information
Full Description
CYLINDER ASSEMBLY,R
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
.
CERTIFICATE OF CONFORMANCE REQUIRED
.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 5B5M3 11B5190831 REVISION NR B DTD 06/08/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 5B5M3 11B5190878 REVISION NR DTD 07/20/2015
SPE7L4-26-T-5655
SECTION B
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 5B5M3 11B5190879 REVISION NR A DTD 05/31/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 5B5M3 11B5190831 REVISION NR DTD 06/08/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017509526 0001 EA 2.000
NSN/MATERIAL:2540016249487
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:FA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
BULK BREAK POINT:
W8071J
W8WF PA ARNG CSMS 1
BLDG 14 26 FIRE LANE
ANNVILLE PA 17003-0000
US
SPE7L4-26-T-5655
SECTION B
PR: 7017509526 PRLI: 0001 CONT’D
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8071J
W8WF PA ARNG CSMS 1
BLDG 14 26 FIRE LANE
ANNVILLE PA 17003-0000
US
MARKFOR
W8071J
W8WF PA ARNG CSMS 1
BLDG 14 26 FIRE LANE
ANNVILLE PA 17003-0000
US
M/F: (TCN) W8071J61900049
RDD: 555
PROJ: 9GQ TP 2
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A3A DIST: ADV: FC: 61
Need Ship Date:00/00/0000 Original Required Delivery Date:07/14/2026
SPE7L4-26-T-5655 NSN/Part Number: 2540-01-624-9487 Quantity: 2 EA Purchase Request: 7017509526QTY: 2 Delivery: 10 days ADO