Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CYLINDER, GRADUATED, LAB

Active
SPE2DH-26-T-6223Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of one 250ml laboratory graduated cylinder. The required item must be constructed from autoclavable polypropylene, feature a pour-out design, and include permanent graduations. The contract is identified by solicitation number SPE2DH-26-T-6223 and NSN 6640-01-498-8524, with a delivery requirement of 20 days after receipt of order. The procurement is subject to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Performance is designated for Fort Hood, Texas. Interested parties must adhere to the response deadline of September 1, 2026, and refer to the DLA Master List of Technical and Quality Requirements for full compliance specifications.

General Info

DoD procurement of one 250ml polypropylene graduated cylinder for delivery to Fort Hood.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

WHSE BLDG 89010, FORT HOOD, TX, 76544, USA

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-6223.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUSA
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CYLINDER,GRADUATED,LABORATORY
CYLINDER, GRADUATED, LABORATORY, 250ML<(>,<)>
POLYPROPYLENE, AUTOCLAVABLE, EACH
POUR-OUT, PERMANENT GRADUATIONS
.
UNIT OF ISSUE EACH (EA)
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-498-8524 Quantity: 1 EA Purchase Request: 7018013343QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
BOTTLE, SCREW CAP
Solicitation # SPE2DS-26-T-369V
This contract is for the procurement of cylindrical plastic bottles with screw caps and liners, featuring a permanent used oil legend. Each bottle has an overall height of 4 inches, an overall diameter of 2.235 inches, and a capacity of 4 ounces. The items are identified by NSN 6640010967529, with specific part numbers from Dresser-Argus, Inc and Gerin Corp Inc. The agreement includes two line items: one for a single unit and another for 500 units, both with a delivery requirement of 20 days. Shipping is FOB destination, with deliveries directed to the USS Laboon and the WRM Preposition Program. Packaging must adhere to DLA requirements and ASTM D3951 for non-hazardous materials, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplies.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M1-26-T-305T
This contract is for the procurement of 11 fluid assembly filters for the M-109 SP Howitzer under solicitation SPE7M1-26-T-305T. The requirement is a total small business set-aside with a delivery timeline of 265 days after order. The contractor is required to perform a First Article Test and submit the resulting report to the Rock Island Arsenal, providing 30 days advance notice for the testing location and date. The agreement incorporates strict DLA technical and quality requirements, including specific packaging instructions and sampling methods based on MIL-STD-1916 or ASQ H1331. Compliance with CMMC Level 2 certification, phosphate coating supplier requirements, and the prohibition of Class I ozone-depleting chemicals is mandatory. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring authorized access to technical data and adherence to the US/Canada Joint Certification Program.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
PARTS KIT, FLUID PRESSU
Solicitation # SPE7M1-26-T-305U
This contract is a solicitation for the procurement of 240 transmission oil filter service kits, identified as fluid pressure filter parts kits under NSN 4330-01-204-2585. Issued by the Department of Defense Maritime Supply Chain, the requirement is set aside for Service-Disabled Veteran-Owned Small Businesses. The delivery timeline is established at 390 days after receipt of order, with the place of performance located in New Cumberland, Pennsylvania. A critical component of this agreement is the strict adherence to export control regulations. The technical data associated with these parts is subject to ITAR and EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7L1-26-T-02B4
This contract is a solicitation for the procurement of fluid filter elements under NSN 2940015583396. The requirement is split into two line items totaling 29 units, with 8 units destined for DLA Distribution New Cumberland, PA, and 21 units destined for DLA Distribution San Diego, CA. The delivery timeframe is set at 83 days after order, with required delivery dates in early 2027. The agreement specifies strict adherence to DLA packaging requirements, including RP001 and MIL-STD-129, with ASTM D3951 standards applied unless superseded by the DLA Master List of Technical and Quality Requirements. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. Approved part numbers include those from General Dynamics Land Systems, Donaldson Company, Advantage West Investment Enterprises, WIX Corp, and URO Vehiculos Especiales SA.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
CENTRIFUGE, LABORATORY
Solicitation # SPE2DH-26-T-6229
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of one laboratory centrifuge, identified by NSN 6640-01-624-3287. The required equipment is a small tabletop unit suitable for clinical and research applications, featuring a direct brushless induction drive motor and tool-free rotor exchange. Technical specifications include a power requirement of 120V, 310W, and dimensions of 18.9 by 14.6 by 12.2 inches. The contract mandates compliance with DLA packaging requirements and technical standards as outlined in the DLA Master List. Bidders must provide the specific source and part number being supplied. Delivery is required within five days after receipt of order to the performance location at Camp Pendleton. The response deadline for this solicitation is September 1, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
DISH, CULTURE, PETRI
Solicitation # SPE2DH-26-T-6224
This contract is for the procurement of high-sensitivity coliform count Petri film culture dishes under solicitation SPE2DH-26-T-6224. The requirement is for 4 packages, with each package containing 50 dishes. The items are FDA regulated and must be supplied according to specific manufacturer part numbers, such as those from 3M Company or Neogen Corp. Delivery is required within 20 days after the order, with the destination serving as the point of inspection and acceptance. The supplies must adhere to strict shelf-life and packaging standards, requiring a 12-month shelf life with no more than two months elapsed from the date of manufacture to the date of delivery. Packaging must be commercial grade, sealed to prevent damage, and marked according to Medical Marking Standard No. 1, including the lot control number and manufacture date. All technical and quality requirements are governed by the DLA Master List and specific medical acquisition packaging standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M1-26-T-306C
This contract is for the procurement of 79 fluid filter elements under solicitation number SPE7M1-26-T-306C for the Department of Defense Maritime Supply Chain. The items are identified by NSN 4330012994127 and include specific part numbers from Hydac Corp and Cincinnati Machine Co. Delivery is required within 160 days after the order, with a required delivery date of December 3, 2026, and a need ship date of February 16, 2027. The shipment is designated as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. There are explicit prohibitions against the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required by specified systems. This is classified as a critical application item and requires compliance with covered defense information and government identification removal protocols.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M1-26-Q-1401
This contract, identified as SPE7M1-26-Q-1401, is a firm fixed price solicitation for the procurement of 442 fluid filter elements under NSN 4330-01-014-1896. The items are designated as Navy Critical Safety Items and Critical Application Items, requiring strict adherence to quality standards including SAE AS9100 and specific documentation for source approval. Approved manufacturers include Boeing Distribution Services, Honeywell International, and Rolls-Royce Corporation. Delivery is required within 30 days after order, with inspection and acceptance occurring at the origin. Packaging and marking must comply with MIL-STD-129 and RP001, ensuring each unit package is marked with the NSN, contract number, lot number, and relevant cage codes. The final destination for shipment is DLA Distribution Warner Robins in Georgia. All requests for waivers or deviations must be approved by the DSC contracting officer.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7L1-26-T-02D0
This contract is a solicitation for the procurement of 110 fluid filter elements, identified as commercial items with part number 5801415504 from Iveco Defence Vehicles S.P.A. and NSN 4330150144194. The requirement is issued by the Department of Defense Land Supply Chain and is designated as a total small business set-aside under NAICS code 333998. Delivery is required within 160 days, with an original required delivery date of November 16, 2026, and a need ship date of February 16, 2027. The items are to be delivered FOB Origin to DLA Distribution Barstow in California. Compliance with DLA packaging requirements, ASTM D3951, and MIL-STD-129 for marking and labeling is mandatory, and the contract incorporates specific technical and quality requirements including the removal of government identification from non-accepted supplies.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
DISPENSER, ORTHO MTS
Solicitation # SPE2DH-26-T-6264
This contract is for the procurement of one plastic Ortho MTS dispenser, a manually operated dual action repeating device designed to dispense pre-determined volumes of liquid under 1 ml for use with the Ortho ID-MTS blood bank gel system. The item is identified by NSN 6640-01-493-7294 and corresponds to several manufacturer part numbers, including Ortho Clinical Diagnostics P/N MTS-9612. As an FDA-regulated device, the procurement requires specific bidder details, including manufacturer information and part numbers, to be submitted for product specialist confirmation. Delivery is required within 20 days after receipt of order, with the destination serving as the point of inspection and acceptance. Packaging must adhere to commercial standards, ensuring each unit is in a sealed container to prevent damage and is marked according to Medical Marking Standard No. 1. The contract incorporates DLA master lists for technical and quality requirements and specifies that shipping should be conducted via common carrier at the lowest available rate to the designated delivery point.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
DISH, CULTURE, PETRI
Solicitation # SPE2DH-26-T-6237
This contract is for the procurement of three packages of PetriFilm Yeast and Mold Count plates, with each package containing 100 units. These nutrient-coated films are used for population determination in food products and environmental testing. The items must be delivered within 20 days after the order and must have a shelf life of 12 months, with no more than two months passing between the date of manufacture and the date of delivery to the government. Packaging must follow commercial standards and be secured in sealed unit containers and suitable shipping containers to prevent damage. All materials must be marked according to Medical Marking Standard No. 1, and labels must include the NSN, manufacturer and CAGE code, manufacture or expiration dates, and the contract or lot number. This acquisition is managed by the Department of Defense Medical Supply Chain FSH and is subject to DLA technical and quality requirements.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M1-26-T-305P
This contract is for the procurement of 13 fluid filter elements, identified by NSN 4330-01-389-0151 and part number 9066-4001 from Fluid Conditioning Products, Inc. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 234 days after the order, with a required delivery date of April 3, 2027. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA. Inspection and acceptance will take place at the destination, and the shipping terms are FOB Origin.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 334510
New
DIBBS
CONTROL UNIT, X-RAY
Solicitation # SPE2DH-26-T-6230
This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of one rechargeable battery handle for the Nomad Pro dental x-ray system. The specific component is identified by NSN 6525-01-684-5488 and features a nominal voltage of 22.2V with a maximum of 25.2V and a maximum energy output of 150W per hour. The contract requires delivery within 20 days after receipt of the order to Fort Hood, Texas. Compliance with DLA master lists for technical, quality, and packaging requirements is mandatory, including the removal of government identification from any non-accepted supplies. The solicitation is listed under NAICS code 334510 with a response deadline of September 1, 2026.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
MATTRESS, LITTER
Solicitation # SPE2DH-26-T-6228
This contract is for the procurement of two Warrior Evacuation Litter Pads (WELP) for the Department of Defense Medical Supply Chain. These black mattress pads measure 72 by 23 by 2 inches and weigh 10.5 pounds. They are engineered for high-altitude aviation use, meeting U.S. Air Force Air Mobility Command standards and Federal Aviation Regulations for flammability. The pads feature a non-reflective, conductive surface with fluid-impermeable materials and pressure relief vents designed to maximize patient pressure management and reduce shear injuries. The solicitation, identified as SPE2DH-26-T-6228, requires delivery within five days after receipt of order to San Antonio, Texas. Bidders must provide the source and part number for the items supplied. The contract adheres to DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies, and specifies that the item is not regulated by the FDA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331313
New
DIBBS
RESCUE AND TRANSPORT S
Solicitation # SPE2DH-26-T-6251
This solicitation issued by the Department of Defense Medical Supply Chain for the agency in Tustin, California, seeks one unit of a basic patient rescue and transport system. The equipment consists of a green high density plastic sheet measuring 10 inches in diameter by 36 inches in length when rolled, weighing less than 20 pounds. It is designed for patient removal and transport from challenging environments including cliffs, rock formations, snow fields, and confined spaces. The system includes a comprehensive accessory kit featuring a Cordura backpack towing harness, a steel locking D carabiner, horizontal and vertical lift slings, a tow strap, and removal handles. The contract requires the supplier to specify the source and part number for NSN 6530-01-620-2574. Delivery is required within 20 days after the order is placed. The procurement is subject to DLA master technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. Responses for solicitation SPE2DH-26-T-6251 must be submitted by the deadline of September 1, 2026.
Alumina Refining and Primary Aluminum Production

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEAT TREATMENT
Solicitation # SPE2DH-26-T-6239
This contract is a solicitation from the Department of Defense Medical Supply Chain for the procurement of two cases of large, single-use instant heat treatment pads. These pads are designed to reach 112 degrees Fahrenheit when activated at a room temperature of 75 degrees Fahrenheit. Each case contains 24 units, and the items must be delivered within 20 days after the order is placed to the performance location at Fort Bragg. The supplies must adhere to specific DLA technical, quality, and packaging requirements, including the removal of government identification from non-accepted supplies. The heat pads must have a total shelf life of 24 months, with no more than 3 months elapsed from the date of manufacture to the date of delivery. All labeling must include the manufacturer date, expiration or retest date, and the contract or lot number in accordance with MMS1A standards.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
EYE, MANIKIN, RESUSCITAT
Solicitation # SPE2DH-26-T-6231
This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of user-repairable replacement eyes for the 6-in-1 TCCC resuscitation training manikin. The requirement consists of one package containing two eyes, identified by NSN 6910-01-702-9059. The contract specifies a delivery timeline of 20 days after the order is placed. All supplies must adhere to DLA packaging requirements and technical quality standards as outlined in the DLA Master List. The solicitation is managed by the Federal Medical Supply Chain and requires the removal of government identification from any non-accepted supplies.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
TRACHEA, MANIKIN, RESUSC
Solicitation # SPE2DH-26-T-6241
This contract is a solicitation from the Department of Defense Medical Supply Chain for the procurement of one user-repairable replacement trachea designed for use with the 6-in-1 TCCC resuscitation training manikin. Identified by NSN 6910-01-702-9060, the item is issued as a single unit and must be delivered within 20 days after the order is received. The procurement is governed by DLA packaging requirements and specific technical and quality standards outlined in the DLA Master List. The solicitation, numbered SPE2DH-26-T-6241, was posted on August 25, 2026, with a response deadline of September 1, 2026. Performance for this federal contract is designated for FPO 96692.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
HANDLE, WEBBING, RESCUE
Solicitation # SPE2DH-26-T-6221
This contract is for the procurement of webbing handles used in rescue and transport systems, specifically identified as replacement handles for the basic patient rescue and transport system. The requirement is for one package containing four handles, referencing Skedco Inc part number SK-205 and NSN 6530-01-260-1214. The item is explicitly noted as not being an FDA regulated device. The supplier must adhere to DLA packaging requirements and Medical Marking Standard No. 1 for all labeling and shipping. Delivery is required within 20 days after the order, with the destination serving as the point for both inspection and acceptance. The contract is issued by the Department of Defense Medical Supply Chain and specifies that the bidder must clearly identify the company and part number being supplied.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331313
New
DIBBS
BAG, EXTRICATION COL
Solicitation # SPE2DH-26-T-6243
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of two royal blue extrication collar carry bags, identified by NSN 6530-01-584-3778. The bags must feature separate inside compartments for straps or heads and adhere to specific DLA packaging and quality requirements. Bidders are required to provide the country of origin and part numbers for the items being supplied. The contract requires delivery within 20 days after receipt of the order, with performance taking place at Davis Monthan AFB. Interested parties must submit responses by September 1, 2026, in accordance with the guidelines set forth in solicitation SPE2DH-26-T-6243.
Alumina Refining and Primary Aluminum Production

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
MEASURE, LIQUID
Solicitation # SPE2DH-26-T-6234
This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of one liquid measure unit with a capacity of 250ML. The item is associated with NSN 6640-01-650-1146 and is intended for use with an unmounted water purification unit. Bidders are required to specify the source and part number being supplied and must adhere to DLA packaging requirements and quality standards as outlined in the DLA Master List. The contract requires delivery within 20 days after receipt of the order, with the place of performance located at Camp Pendleton, California. Interested parties must submit responses by September 1, 2026, in accordance with solicitation number SPE2DH-26-T-6234. The procurement also specifies the removal of government identification from any non-accepted supplies.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
LIGHT, SURGICAL, CEILING
Solicitation # SPE2DH-26-T-6261
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of three ceiling-mounted surgical examination lights, identified by NSN 6530-01-688-4565. These high-performance units feature eight LEDs producing 55,000 lux at a 24 inch focal length with a color temperature of 4300 degrees Kelvin and a color rendering index of 97. The lights are capable of dimming to 50 percent output and are supplied with a shipboard mil-spec dorn plug and stowing fixture. The equipment is specifically engineered for maritime environments, having passed the MIL-S-901D lightweight shock test in the stowed position and receiving approval for Grade B, Class I, Type A deck and hull mounting. The contract requires adherence to DLA master technical and quality requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. Delivery is required within five days after the order is placed.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details