Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DASHPOT

Active
SPE4A7-26-T-566EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a dashpot item identified by NSN 5342-01-303-0601 and part number 11629897, sourced exclusively from ITT Enidine Inc. with CAGE code 24403. Technical requirements are dictated by a legacy drawing dated April 8, 1988, with no approved technical data package currently available for competitive procurement due to proprietary or insufficient documentation. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated in the contract, and unspecified attributes are treated as major. The item is classified as a critical application item with verification levels assigned per critical, major, and minor attributes. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and unit container specifications, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization adheres to DLA packaging requirements, and delivery is FOB origin with a firm quantity of seven units and zero variance allowed. Inspection and acceptance occur at origin, and delivery is due within five days of contract award with an original required delivery date of June 25, 2026. The item is destined for the 2nd Supply Depot in Busan, South Korea, under a DoD procurement managed by the Department of Defense, and cybersecurity compliance is required under CMMC Level 2 self-assessment. The solicitation number is SPE4A7-26-T-566E, with a response deadline of July 20, 2026, and the unit of issue is each.

General Info

Procure seven dashpots NSN 5342-01-303-0601 from ITT Enidine Inc. by June 25, 2026, FOB origin, CMMC Level 2 compliant.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPEA47-26-T-566E

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Lauren Montgomery
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DASHPOT
DASHPOT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SOURCE CONTROL ITEM:
THE TECHNICAL/QUALITY/TEST REQUIREMENTS FOR
CITED P/N WILL BE IN CONFORMANCE WITH
THE LISTED DRAWING.
IAW US ARMY TANK AUTOMOTIVE COMMAND
CAGE 19207
DWG 11629897, BASIC W/NO REV, DTD 8 APR 88. P/N 11629897
APPROVED SOURCE(S):
ENIDINE INCORPORATED,CAGE 24403 IDENTIFY TO:
DSCR DOES NOT CURRENTLY HAVE AN APPROVED
TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
TECH DATA:
DSCR DOES NOT CURRENTLY HAVE AN APPROVED
TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT.
SAMPLING:
SPE4A7-26-T-566E
SECTION B
CRITICAL APPLICATION ITEM
ITT ENIDINE INC. 24403 P/N SP-4243
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 11629897 REVISION NR DTD 04/08/1988 PART PIECE NUMBER: 11629897
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017252423 0001 EA 7.000
NSN/MATERIAL:5342013030601
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
BKSJ00
THE 2ND SUPPLY DEPOT
FMS IMPORT MANAGER (82-51-790-5619)
8BUDO-RO GAMMAN-DONG NAM-GU
BUSAN
KR
MARKFOR
SPE4A7-26-T-566E
SECTION B
PR: 7017252423 PRLI: 0001 CONT’D
BKSJ00
THE 2ND SUPPLY DEPOT
FMS IMPORT MANAGER (82-51-790-5619)
8BUDO-RO GAMMAN-DONG NAM-GU
BUSAN
KR
M/F: (TCN) BKSJ5461640277
RDD: 172
PROJ: TP 1
SUPP ADD: BA5BUE SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: B01 ADV: FC: YY
Need Ship Date:00/00/0000 Original Required Delivery Date:06/25/2026
SPE4A7-26-T-566E NSN/Part Number: 5342-01-303-0601 Quantity: 7 EA Purchase Request: 7017252423QTY: 7 Delivery: 5 days ADO

Similar Contracts

NAICS: 332994
New
DIBBS
STOP, SLIDEThis contract pertains to the procurement of defense articles subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring registration with the Directorate of Defense Trade Controls prior to award. The items specified are classified as critical application hardware supplied by SIG SAUER INC with part numbers 1301309-02M17 and 13067046, totaling 248 units, each priced at $248.00, for a total value of $61,504. Delivery is mandated FOB origin, with a 99-day lead time and inspection and acceptance points at the destination, in accordance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The items must be palletized per DLA packaging directives and must not contain intentionally added mercury except under strictly defined exceptions such as batteries, fluorescent lamps, and weapon system components, with additional containment requirements for portable devices containing mercury. Supply chain traceability documentation must be retained by the contractor as outlined in DLAD Procurement Note C03, and government identification must be removed from non-accepted supplies. The contractor is also required to comply with CMMC Level 2 cybersecurity self-assessment standards and adhere to all technical and quality requirements referenced in the DLA Master List. Delivery is directed to DLA Distribution Anniston in Anniston, Alabama, with a required ship date of October 31, 2026, and the contract solicitation number is SPE7L4-26-T-5608, under a federal acquisition with NAICS code 332994.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
LOADER, GUNThe item being procured is a loader, gun, specifically designated as charger, gun, LH, MK16 MOD 0 with NSN 1010-01-129-1247, for a quantity of 29 units, under solicitation SPE7L3-26-T-115E. This is a critical defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls, with proof of registration mandatory prior to award. Technical and quality requirements are governed by the DLA Master List, with revisions tied to solicitation or award dates depending on acquisition type. The item must be manufactured using specific processes including metal casting, requiring approved tooling, and phosphate coating must meet certified supplier requirements. Packaging must follow MIL-STD-2073-1 Method 33 with detailed material specifications for preservation, wrapping, bagging, cushioning, and container closure, replacing prior methods. Export control extends to technical data under ITAR or EAR, restricted to contractors with approved JCP certification, completed training, and DLA authorization. All production must occur through qualified manufacturers or suppliers listed on applicable QPLs or QMLs, with configuration changes requiring formal engineering change proposals. Product inspection is conducted by DCMA QAR at the manufacturer’s facility, and verification testing may be invoked prior to each shipment, requiring five samples per subcontractor, with one potentially destroyed during testing. No certificate of conformance is permitted. Manufacturing must comply with zero-defect sampling standards under MIL-STD-1916 or equivalent, with all attributes assigned strict verification levels. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals require approval. The contractor must identify the actual manufacturer and phosphate supplier, with any post-award changes requiring formal modification. Delivery is due within 317 days, and the contract imposes stringent quality management requirements including ISO 9001:2015 and CMMC Level 2 certification for third-party assessment. The Defense Logistics Agency enforces strict controls over technical data handling and data disclosure to foreign nationals, regardless of location.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
TRACK ASSEMBLY, CHUTEThe contract is for the procurement of a TRACK ASSEMBLY, CHUTE with NSN 1005-01-239-4199, under solicitation SPE7LX-26-U-8783, for a quantity of 123 units to be delivered within 133 days of award. The requirement falls under NAICS code 332994 and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation was posted on July 12, 2026, with responses due by July 27, 2026, and the point of contact is Theodore Misiolek. Technical and quality requirements referenced in the document are drawn from the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect at the solicitation issue date. The item is subject to demilitarization requirements as a Category I munitions component and must comply with DLA packaging standards and the removal of government identification from non-accepted supplies. Contractor retention of supply chain traceability documentation is mandated under DLA Directive Procurement Note C03 from August 2016. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization; access is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA export control training and obtained official approval. CMMC Level 2 certification is required for any third-party assessment organization involved in cybersecurity-related functions under this contract.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
DOOR, ACCESS, WEAPONThe contract pertains to the procurement of a Door, Access, Weapon System identified by NSN 5342-01-420-8210, with a quantity of six units to be delivered within 74 days under solicitation SPE7L1-26-T-827P. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination located at DLA Distribution Red River in Texarkana, Texas. Packaging must comply with ASTM D3951 and MIL-STD-129, prioritizing DLA’s Master List of Technical and Quality Requirements over any standard, and palletization must follow RP001 DLA Packaging Requirements. The item must be labeled according to specified unit of issue and quantity per unit pack, and all packaging must remove government identification from non-accepted supplies. The contract mandates adherence to CMMC Level 2 Self-Assessment for cybersecurity and applies Covered Defense Information protocols. Sampling and quality verification follow MIL-STD-1916 or ASQ Z1.4 with zero non-conformances required unless otherwise directed, assigning verification levels VII, IV, and II for critical, major, and minor attributes respectively. The technical and quality requirements are governed by the DLA Master List, with revisions controlled by the RFP issue date or amendment date for large acquisitions. The unit of issue is each (EA), and transportation logistics are governed by DLAD procedural notes C19 and C20. The solicitation was posted on July 12, 2026, with a response deadline of July 23, 2026, under NAICS code 332994, administered by the Department of Defense’s Land Supply Chain, with Madison Young as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
BUTTON, LINK STRIPPERThe contract is for the procurement of three Button, Link Stripper units, identified by NSN 1005-01-418-3007 and part number 465-0209, supplied by Northrop Grumman Systems Corp, ROSOMAK S.A, and BAE Systems Hagglunds Aktiebolag. The item is classified as a Category I munition under DoD regulations, requiring demilitarization upon disposal. The contract mandates compliance with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 marking requirements, with no special marking codes applied. All materials must be steel, packaged in accordance with RP001, and shipped FOB origin with zero quantity variance allowed. Inspection and acceptance occur at the point of origin. The delivery deadline is 20 days from the contract award, with an original required delivery date of July 15, 2026. The end recipient is the Royal Thai Air Force Armament Supply Depot at Don Muang Air Base in Thailand, with freight handled by Login FMS Logistics LLC. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date. The procurement falls under solicitation SPE7L7-26-T-4266, with a response deadline of July 23, 2026, and is issued by the Defense Logistics Agency under NAICS code 332994.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details