This Government Contract opportunity from Department Of Commerce was posted on March 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Data Quality Assurance & Control (QA/QC) Services

Closed

Federal

Submission Closed03/17/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking qualified small and disadvantaged business firms to serve as a subconsultant for the Oakland and Santa Fe Waterline Replacement project (CIP 5661) in Hemet, California. The selected firm will provide geotechnical and materials inspection and testing services, including material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottom. Key responsibilities include initial sampling and acceptance testing, continuous monitoring throughout the anticipated 210 construction working days, and the preparation of a certification memorandum signed by a professional engineer to identify any non-complying materials. This project is funded in whole or in part through a U.S. Environmental Protection Agency Community Grant, making the subconsultant a federal subrecipient. The subcontract award is contingent upon Webb Associates being selected by the City of Hemet. Interested firms must submit a technical proposal, a fee proposal, and documentation of small or disadvantaged business certifications via PlanetBids. The selected firm must comply with rigorous federal and state requirements, including the Build America, Buy America Act, EPA domestic preference requirements, and California prevailing wage laws. Additionally, the subconsultant must adhere to Disadvantaged Business Enterprise (DBE) participation standards under 40 CFR Part 33, maintain specific insurance coverage with an A.M. Best rating of no less than A:VII, and ensure all personnel are registered with the Department of Industrial Relations. Final project deliverables must include a hard-copy project notebook and an electronic copy on a USB thumb drive.

Albert A. Webb Associates

POSTED

DEADLINE

Request for Qualifications

Solicitation # 48818

The City of St. Louis Board of Public Service has issued a Request for Qualifications under solicitation number 48818 for the testing and inspection of materials. This contract is specifically designated for various landside construction projects located at the St. Louis Lambert International Airport. Interested parties must submit their qualifications by the response deadline of September 29, 2026. This solicitation is managed as a state and local government opportunity to ensure the quality and compliance of materials used in airport infrastructure improvements.

City of St. Louis Board of Public Service

POSTED

DEADLINE

Third-Party Quality Inspection and SamplingThis subcontract for Third-Party Quality Inspection and Sampling supports prime contractors on DLA supply contracts at Tinker AFB. The selected provider will perform independent quality verification and sampling, ensuring dimensions align with TDP Rev A Gen 3 and adhering to the DLA Master List of Technical and Quality Requirements. Technical execution requires the use of precision measurement tools such as CMM, micrometers, and calipers, along with specific knowledge of ASTM D3951 to deliver comprehensive inspection reports and quality certification documents. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense through the ASC Supplier Oper AE and AF Div. Interested parties must respond by October 6, 2026, following the posting date of September 28, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) for Hose AssemblyThis subcontract involves performing First Article Testing for hose assemblies under NSN 47200167195 to support DLA Land and Maritime fluid handling contracts. The selected provider will utilize a qualified laboratory facility to conduct pressure testing and material analysis, ensuring that manufacturing processes and products comply with all necessary specifications. The primary deliverables include the generation of detailed test reports, certifications of results, and the delivery of a certified first-article sample. This work is managed by the Department of Defense Fluid Handling Division and is to be performed in New Cumberland, Pennsylvania, with a response deadline of October 9, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing and InspectionThis subcontract for First Article Testing and Inspection supports prime contractors on DLA supply contracts by validating manufacturing processes. The scope involves testing and inspecting the first production unit to ensure full compliance with technical drawings and the DLA Master List of Technical and Quality Requirements. To achieve this, the provider will utilize specialized metrology equipment, testing rigs, and inspection software, ultimately delivering a validated first article and a comprehensive FAT Report. The project is managed under the Department of Defense for the Land Supply Chain agency and is performed at Hill AFB in zip code 84056-5734. Classified under NAICS code 541380, the opportunity was posted on September 28, 2026, with a response deadline of October 9, 2026.

POSTED

DEADLINE

First Article Testing (FAT) and Quality CertificationThis subcontract focuses on First Article Testing and Quality Certification for prime contractors under DLA Troop Support supply contracts. The scope involves validating sample units for NSN 3940-01-541-0894 by utilizing certified load-testing rigs and calibration equipment within a materials testing laboratory to ensure compliance with technical specifications. The successful contractor is responsible for developing and submitting formal test reports for government approval and delivering the final FAT Report along with the approved sample unit. The opportunity is a Total Small Business Set-Aside under NAICS code 541380, managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 5, 2026, following the posting date of September 28, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Rubber Testing For Electrical Safety Equipment - Professional Services Agreement

Solicitation # URQM-2025-APU RFP (CP 4.1)-0032

The City of Anaheim Public Utilities Department is seeking a NAIL-accredited laboratory to enter into a two-year professional services agreement for the testing, inspection, certification, and recertification of rubber insulating protective equipment. The selected contractor will be responsible for the end-to-end logistics of the process, including the pickup and delivery of equipment, maintaining a detailed inventory database of serial numbers and expiration dates, and providing notification to the City 30 days prior to certification expirations. Additionally, the contractor must furnish new, manufacturer-certified replacement equipment, such as gloves, sleeves, and blankets, for any items that fail testing, ensuring all products meet current ASTM International specifications. Proposals will be evaluated based on a weighted scoring system comprising cost effectiveness (25%), experience and past performance (20%), technical approach and quality control (20%), and facility and operational capability (20%). To be considered responsive, respondents must demonstrate NAIL accreditation, a capacity for logistics management, and the ability to provide replacement stock. The contract is based on a Pro Forma Professional Services Agreement, with strict adherence required for insurance and indemnity provisions. Submissions must be made electronically via the OpenGov Portal by October 14, 2026, and must include a respondent questionnaire, at least three customer references, and any proposed agreement redlines in DOCX format.

City of Anaheim Public Utilities Department

POSTED

DEADLINE

High-Voltage Equipment Testing and CertificationThis subcontract for High-Voltage Equipment Testing and Certification involves providing independent testing and certification of high-voltage apparatus for prime contractors working on City of Lakeland utility projects. The scope of work includes measuring Radio Influence Voltage according to NEMA 107 and verifying dielectric strength and operational performance to ensure all equipment complies with NEC and NESC standards. The contractor will utilize specialized high-voltage testing labs and RIV measurement equipment to deliver formal certified test reports and compliance certificates. This opportunity is managed by the LE Substation Operations agency in Florida under NAICS code 541380, with a response deadline of October 27, 2026.

LE - Substation Operations

POSTED

DEADLINE

Structural Steel Material TestingThis subcontract for the State of Rhode Island involves the testing and inspection of steel materials and welds for bridge projects. The selected provider will work for prime contractors to perform prefabrication inspections and material testing in accordance with the CS-7 Material Testing Breakdown List, utilizing specialized non-destructive testing, ultrasonic, or X-ray equipment. To qualify, the provider must operate an accredited testing laboratory and employ certified inspectors. The primary deliverables for this engagement include detailed material testing reports and official inspection certifications. The solicitation is categorized under NAICS code 541380, with a response deadline of October 23, 2026.

State of Rhode Island

POSTED

DEADLINE

Soil and Rock Laboratory TestingThis subcontract for Soil and Rock Laboratory Testing involves providing specialized analysis of soil and rock samples for prime contractors working on gravity sewer projects within the Niagara Region. The selected provider will be responsible for evaluating soil stratigraphy and properties through a variety of methods, including sieve analysis, Atterberg limits, and triaxial testing, while ensuring all in-situ testing adheres to standard geotechnical laboratory protocols. The contractor is required to deliver comprehensive laboratory test reports and detailed soil property data. Interested parties must submit their responses by October 15, 2026, for this Niagara Region agency project categorized under NAICS code 541380.

POSTED

DEADLINE

Inspection and Testing of Aerial Devices and Ground Ladders

Solicitation # IFB 7800 MAS1013

The City of Austin is soliciting bids under IFB 7800 MAS1013 for a contractor to provide annual and as-needed inspection, testing, and certification of aerial devices and ground ladders. The scope of work covers a diverse inventory including ladder fire trucks, forklifts, aerial man lifts, bucket trucks, and approximately 7,200 linear feet of ground ladders. All services must be performed at designated City fleet service centers using mobile test equipment. The contractor is required to employ technicians certified to NDT Level II or III and must adhere to the latest industry standards, including ANSI/SAIA, ASME, OSHA, and NFPA 1932. Key deliverables include the provision of official certification stickers for compliant units, the installation of heat sensor labels for ground ladders, and a contingency plan identifying the City as a priority customer during emergencies. The contract is structured around three pricing categories: non-fire aerial apparatuses, fire department aerial apparatuses and ground ladders, and expedited services. Award criteria are based on overall low cost or a combination of factors most advantageous to the City, with preferences available for local and small businesses. Mandatory compliance requirements include the City of Austin Living Wage Program, which sets a minimum wage of 22.15 per hour, and a certification that the firm has not been adjudicated for wage theft within the last five years. Additionally, contractors must meet strict insurance requirements with an A.M. Best rating of B+VII or better and comply with Texas Government Code Chapter 2275 regarding foreign ownership restrictions. Offers are due by October 22, 2026.

POSTED

DEADLINE

Precision Cleaning Services (Oxygen Systems)This subcontract for Precision Cleaning Services (Oxygen Systems) supports Navsup Weapon Systems Support Mech projects within the Department of Defense. The contractor is responsible for the precision cleaning and testing of components to ensure they are free of contaminants for oxygen-rich environments, specifically focusing on shipboard oxygen, helium, nitrogen, and hydrogen systems. All work must adhere to Special Clean 02-N2 (Green) protocols and comply with MIL-STD-1330 standards to deliver certified Oxygen Clean components. The project requires the use of specialized cleaning solvents and testing equipment under NAICS code 541380. Interested parties must submit their responses by October 9, 2026, at 8:30 PM.

Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

in 10 days

General Info

Agency

Department Of Commerce → Acquisition And Grants Office

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Silver Spring, MD, 20910, USA

Set-Aside

SBA

Documents

This scope was carved out of 253410DataIntegration2026.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

253410DataIntegration2026

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMar 10

subcontract

Response DeadlineMar 17

Deadline has passed

Submission Closed

03/17/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Commerce → Acquisition And Grants Office

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Commerce → Acquisition And Grants Office

Office AddressN/A

ContactsNo contact information available

Full Description

Implementation and maintenance of a Quality Control Plan (QCP) to ensure ≥95% accuracy in data deliverables and reports, including validation of data imports and error tracking.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS