Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

DBE-Certified Subcontracting Participation

Active

State & Local

Response Deadline08/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

DBE-certified firms are invited to participate in subcontracting opportunities to support prime contractors in meeting federal Disadvantaged Business Enterprise goals under 49 CFR Part 26. Eligible firms may perform defined scopes of work including labor, materials, or specialty trades essential to the overall project, with the primary objective of ensuring compliance with federal outreach and utilization requirements. This opportunity is structured as a subcontract and is tied to the NAICS code 238220, indicating focus on electrical and other construction trades. The solicitation is administered by Centro through the New York agency office with a response deadline of August 28, 2026, at 5:00 PM. While no specific project location or point of contact is provided, interested DBE firms must submit their expressions of interest via the designated online portal by the stated deadline. Participation requires valid DBE certification and the ability to deliver services in accordance with federal guidelines to support prime contractors’ obligations under the program.

General Info

DBE-certified firms can bid on subcontracting opportunities in electrical trades by August 28, 2026, to meet federal compliance goals.

Agency

New York → CentroView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

NY, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 28

Submission deadline

Response Deadline

08/28/2026, 05:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNew York → Centro

ContactsNo contacts available

OfficeN/A

Organization / Agency

New York → Centro

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

DBE-certified firms to perform defined scopes such as labor, materials, or specialty trades to help prime meet federal DBE goals under 49 CFR Part 26.

Similar Contracts

Same NAICS industry code

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

This is a subcontracting opportunity for fire extinguisher inspection and servicing at the Excelsior Springs Job Corps Center in Missouri, solicited by Education & Training Resources under the solicitation number esjc-fire-extinguisher-services. The contract requires quarterly inspections of 175 fire extinguishers across 22 campus buildings and center-owned vehicles, with replacement of any used, partially used, or uncharged units to ensure all devices are fully operational. Each extinguisher must be tagged with an inspection label upon service, and all work must comply with the National Electrical Code, NFPA Standard No. 101, Life Safety Code, and applicable OSHA regulations, along with local, state, and federal codes. The period of performance runs from October 1, 2026, through September 31, 2027, with services performed four times annually. Bids must be submitted by 12pm CST on August 14, 2026, and are to be delivered to the center’s address in Excelsior Springs, Missouri, with the envelope clearly labeled. The procurement is set aside for small business concerns, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses. Respondents must hold an active SAM.gov registration with a Unique Entity ID, provide complete vendor documentation including Form W-9, Vendor Acknowledgement Form, FFATA Notice, and Anti-Lobbying Certification, and hold all required Missouri-specific licenses for fire protection services. Proposals must include a detailed cost breakdown, a proposed service schedule, and proof of insurance covering automobile, liability, workers compensation, and builders risk if applicable. Contractors must also comply with the Service Contract Act, Executive Order 14026 minimum wage requirements, and may be subject to payment and performance bonding depending on contract value. Award will be based on best overall value, not merely the lowest price, and ETR will determine the successful offeror. All personnel must adhere to facility security rules, including a zero-tolerance policy on alcohol, drugs, tobacco, and firearms, and must avoid fraternization with students or staff. Final acceptance occurs on-site, requiring a signed punch list and submission of warranties before payment, which is processed within 30 days of invoice.

ETR/Excelsior Springs Job Corps

POSTED

about 1 hour ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

Serrato Corporation DBA Flint Hills Job Corps is seeking a licensed HVAC contractor to replace three boilers across two buildings at the Flint Hills Job Corps Center in Manhattan, Kansas—two boilers in Building 1 (IOOF) and one high-efficiency boiler in Building 2 (Administrative/Academic). The project requires removal of two existing Peerless gas-fired boilers in IOOF and installation of new units rated at 1,680,000 B.T.U. input and 1,344,000 B.T.U. output per hour, while Building 2 will receive a new 94% efficient Energy Star-certified boiler with 600,000 B.T.U. input and 572,000 B.T.U. output per hour. All work must comply with the latest editions of NEC, NFPA-72, NFPA 101, IBC, IMC, IPC, IECC, and IFGC standards, as well as applicable Kansas state codes. The contractor must also adhere to EPA regulations including 40CFR761 and 40 CFR 61 subpart M, and OSHA’s 29CFR1926 safety requirements. A qualified commissioning agent must verify the boiler control systems, and all work must be documented with inspection reports, test results, warranties, commissioning reports, and operations and maintenance manuals. The contract is restricted to small business set-asides, including SB, SDB, WOSB, HUBZone SB, VOSB, and SDVOSB, with vendors required to submit a W-9 and DUNS number with their proposal. The contractor must provide a Certificate of Liability Insurance naming the Center as both Certificate Holder and Additional Insured, hold a current Kansas HVAC license, and obtain all necessary local permits. Labor must conform to Davis-Bacon wage determinations, and all materials must be properly received, stored, and secured by the contractor. Pipe labeling with preformed PVC labels and directional flow arrows is mandatory. Performance must begin within 14 days of the Notice To Proceed, with substantial completion expected within 60 days and full contract close-out within 90 days, though all work including punch list items must be finalized within 120 calendar days of NTP. The contractor must notify the Center seven days prior to substantial completion for a walk-through, and file a written notice three workdays before final inspection. Warrant

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 1 hour ago

DEADLINE

Keystone Lincoln Dorm Water Heater Repair

Solicitation # keystone-lincoln-dorm-water-heater-repair

The contract involves the repair of a specific AquaPlex Turbopower 96 water heater, Model #100L400A-TPX with Serial Number F008076, located at the Keystone Job Corps Center in Drums, Pennsylvania, within the Lincoln dormitory. The work requires replacement of key internal components including the blower motor assembly, gas valve, hot surface ignitor, ignitor gasket, and electrode flame rod. The contract is issued under a Small Business Set-Aside, open exclusively to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. All respondents must be registered and actively listed on Sam.gov. Labor standards require compliance with Davis-Bacon wage rates, and certified payroll documentation must be submitted. Bidders are required to clearly separate labor and material costs in their proposals, though no pricing schedule, estimated contract value, or specific evaluation factors are provided. The solicitation was posted on August 9, 2026, with proposals due by August 14, 2026. The award basis and funding amount are unspecified, and no detailed delivery schedule, period of performance, packaging requirements, or inspection criteria are outlined. No formal attachments or exhibits are listed, and the procurement is administered by Adams & Associates Keystone Red Rock Job Corps, with Jennie Drumheller as the point of contact.

Adams & Associates Keystone Red Rock Job Corps

POSTED

about 1 hour ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026- Maui- Dorm Exhaust Fans

This is a subcontracting opportunity with Management and Training Corporation (MTC) for the removal and replacement of approximately 25 exhaust fans across three dormitories at the Hawaii Job Corps Center in Makawao, Hawaii. The work includes safe removal and disposal of existing units in compliance with local regulations, installation of new approved fans with secure mounting and proper ventilation connections, restoration of damaged drywall and plaster, painting to match existing finishes, complete site cleanup, and a final inspection conducted with the Maintenance Supervisor. Contractors must provide two complete operation and maintenance manuals with product data sheets, parts lists, and maintenance requirements, as well as at least two hours of on-site training for facility personnel. The contract is a fixed-price, single lump sum arrangement, with performance to begin within five business days after a mutually agreed start date signed off in a Notice to Proceed letter during a pre-construction meeting. All work must comply with applicable building codes and professional practices, and contractors are responsible for securing all necessary permits. Bids must be submitted via email to Karllene Allen and Mila Handel no later than 3:00 PM HST on August 28, 2026, using the official MTC Bid for Lump Sum Contract form signed by an authorized official, along with a detailed cost breakout itemizing materials, labor with categories and rates, equipment, associated fees, bonds, subcontractor costs, overhead, profit, and other direct or indirect expenses. A mandatory physical site visit with signature on an attendance roster is required before bid submission. Offerors must submit the MTC Supplier Packet including a completed W-9, supplier self-certification, and acceptance of terms and conditions, three references for comparable projects, and proof of insurance meeting minimum requirements of $1 million general liability per occurrence with MTC listed as additional insured, $1 million auto liability, $500,000 workers’ compensation, and $1 million professional liability if applicable. If the bid equals or exceeds $25,000, a bid bond of 20% of the base bid and performance and payment bonds at 100% of contract value are required, issued by an A-rated surety and acceptable in AIA or SF form. All contractors and first-tier subcontractors must be certified as small business entities under the NAICS code 238220 and represent their status under the SBA’s small business categories including SDB, WOSB, HUBZone, VOSB, and SDV

Management & Training Corporation

POSTED

about 1 hour ago

DEADLINE

NJCC Building 32 Boiler Replacement in Vermont

Solicitation # njcc-building-32-boiler-replacement-vermont

The solicitation seeks bids for the replacement of an oil-fired boiler at Building 32 of the Northlands Job Corps Center in Vergennes, Vermont, with a high-efficiency propane steam boiler compliant with Federal Energy Management Program standards. The scope includes complete demolition and disposal of the existing boiler and blow-down separator, along with installation of new equipment such as a propane gas tank, gas burner, duplex boiler feed tank and control panel, condensate tanks, steam traps with Y strainers and check valves, condensate receivers, and reduced pressure backflow preventers. Piping must be insulated, the existing stack modified to fit, and the entire system wired, tested for fuel-oxygen mix, cleaned, skimmed, and fully commissioned. The work must adhere to the International Mechanical Code, International Energy Conservation Code, International Plumbing Code, International Fuel Gas Code, National Electric Code, NFPA Life Safety 101, and NFPA 58. The contract is a subcontracting opportunity open exclusively to small business categories including SBA-certified Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses, with all bidders required to possess an active SAM.gov registration and Unique Entity ID. All proposals must include a completed Bid Sheet with line-item pricing for equipment, materials, and labor; Vermont-specific licensing and credentials; a proposed work schedule; Form W-9; Vendor Acknowledgement Form; applicable FFATA and Anti-Lobbying Certifications; Certificates of Insurance listing Center/ETR as certificate holder; and, if applicable, Performance and Construction Bonds. For projects exceeding $35,000, a 100% payment bond is required; for those over $150,000, both 100% performance and payment bonds are mandatory. Contractors must comply with Davis-Bacon wage requirements, Executive Order 14026 minimum wage standards, and Service Contract Act provisions, while adhering to strict site security and conduct rules including no fraternization with staff or students, and a prohibition against alcohol, tobacco, drugs, and firearms on premises. Bids are due by 12:00 p.m. Eastern Time on August 20, 2026, and must be delivered to the designated address in Vergennes, Vermont. Items are quoted F.O.B. destination, with no additional charges for delivery, packing, or insurance accepted unless explicitly included and approved.

Northlands Job Corps Center /ETR

POSTED

about 1 hour ago

DEADLINE

RFQ#3857 Freezer Door Replacement

Solicitation # RFQ#3857

This is a subcontracting opportunity issued by Management & Training Corporation (MTC) for the replacement of three walk-in refrigeration doors—specifically one cooler door and two freezer doors—at the Charleston Job Corps Center located at 1000 Curtis Price Way, Charleston, West Virginia. The solicitation, identified as RFQ#3857 Freezer Door Replacement, is a fee-for-service procurement requiring contractors to furnish all labor, materials, equipment, transportation, supervision, and incidentals necessary to remove and dispose of the existing doors and install new ones with full hardware including hinges, latches, gaskets, closers, thresholds, and related accessories. Work must be performed in compliance with OSHA safety standards and applicable refrigeration and building industry codes, with all installations verified to open, close, latch, and seal properly. A final inspection by Charleston Job Corps personnel is mandatory for acceptance, and the work area must be cleaned upon completion. The contract requires adherence to strict shipping instructions from MTC, and any deviation resulting in loss or expense is the contractor’s responsibility. All shipments by third parties must include signed bills of lading forwarded to MTC with the invoice. The solicitation is set aside for small business categories under SBA rules, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, with the NAICS code 238220 (Plumbing, Heating and Air-Conditioning Contractors) and a size standard of $19 million in annual receipts. Respondents must self-certify their business category and provide full entity identifiers including Tax ID, DUNS#, and UEI. First-tier subcontractors whose awards exceed $30,000 must disclose debarment or suspension status. Compliance with FAR clauses including 52.222-41 (Service Contract Labor Standards) is required, with wages governed by WD#2015-4347 (Rev 29) effective July 8, 2025. Additional requirements include general liability insurance of $1 million per occurrence/$3 million aggregate, auto insurance of $1 million, and workers’ compensation of $500,000, all naming MTC, DOL, and Charleston Job Corps as certificate holders and additional insured. Contractors must also comply with DOL privacy, training, and records management directives, including reporting any PII breach within one hour,

Management & Training Corporation

POSTED

about 1 hour ago

DEADLINE

Plumbing and Gas Line Repair

Solicitation # plumbing-gas-line-repair

The contract requires the correction of plumbing and gas system deficiencies at the Earle C. Clements Job Corps Center in Morganfield, Kentucky, to ensure full compliance with the International Plumbing Code and safety standards. The awarded contractor must provide all labor, materials, equipment, supervision, and incidentals necessary to complete the work in a fully operational state. Key tasks include repairing gas piping and eliminating leaks at Building 305, installing backflow preventers at Buildings 607 and 701, relocating water piping away from electrical panels at Building 610, and performing pressure and leak testing throughout the system. The contractor is also responsible for providing all piping, fittings, supports, and accessories, along with restoration, sealing, and patching of affected areas. Delivered deliverables must include two complete operation and maintenance manuals with manufacturer data, certificates of warranty, and a minimum of two hours of on-site training for facility personnel. The work must be completed within 60 consecutive business days after receipt of a written notice to proceed, with work commencing no later than five business days after the agreed start date, following an on-site pre-construction meeting. The contract is a fixed-price, single lump sum arrangement with an estimated value not exceeding $25,000. Bids must be submitted via email to Miranda Wolfe by 3:00 PM CST on August 10, 2026, using the MTC Bid for Lump Sum Contract form, signed by an authorized representative, and accompanied by a detailed cost breakout on contractor letterhead, including labor rates, material costs, equipment specs, subcontractor expenses, overhead, and profit. Required documentation includes the MTC Supplier Packet with Form W-9, Supplier Self-Certification, and Acceptance of Terms. All bidders must possess a Unique Entity Identifier and a nine-digit Tax ID and DUNS number. Subcontractors with agreements over $30,000 must disclose any federal debarment status, and all must certify their business category under NAICS code 238220, with the solicitation restricted to small business set-asides including SDB, WOSB, HUBZone SB, VOSB, and SDVOSB. The contractor must submit weekly certified payrolls, comply with Executive Order 13658 prevailing wage requirements, provide Safety Data Sheets for hazardous materials, identify underground utilities before excavation, maintain $1 million general liability and auto insurance, and $50

Earle C. Clements Job Corps Center

POSTED

about 1 hour ago

DEADLINE

J--HVAC REPLACEMENT FOR COLORADO RIVER AGENCY DETENTION FACILITY

Solicitation # 140A1126R0011

The U.S. Department of the Interior, Bureau of Indian Affairs, Western Regional Office in Phoenix, Arizona, is preparing to solicit proposals for the replacement of heating, ventilation, and air conditioning systems at the Colorado River Agency Detention Facility in Parker, Arizona. The contract requires comprehensive mechanical services to remove outdated or nonfunctional HVAC units and install new commercial-grade systems to restore full climate control capability. This procurement is set aside exclusively for Indian Small Business Economic Enterprise concerns under NAICS code 238220, and contractors must be registered in the Government’s System for Award Management to be eligible. The performance period is strictly limited to 60 calendar days beginning on the Notice to Proceed date. The solicitation, identified as 140A1126R0011, is expected to be released during the week of August 17, 2026, with proposals due by September 8, 2026. All documents will be accessible electronically via SAM.gov, and qualified sources are invited to submit proposals. The designated point of contact for inquiries is Melanie Schiaveto, reachable via email or phone.

POSTED

about 17 hours ago

DEADLINE

Replace HVAC units (7) at Mashpee Service Unit

Solicitation # 75H71526R00006

The contract involves replacing seven existing HVAC units across three buildings at the Mashpee Service Unit, with work focused on the Admin, Medical, and Dental buildings, each measuring 2,400 square feet. Two outdated Trane rooftop units will be removed and replaced with new appropriately sized units on both the Admin and Medical buildings, while the Dental building will have its existing Bard vertical mounted units removed and replaced with new vertical mounted packaged units—two units in the Dental building and a single unit in the Admin building. All replacements are designed to meet the specific heating and cooling demands of each facility. The contract is titled Replace HVAC units (7) at Mashpee Service Unit, solicitation number 75H71526R00006, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. It falls under NAICS code 238220 for plumbing, heating, and air-conditioning contractors, with performance located in Mashpee, Massachusetts, and managed by the Nashville Area Indian Health Service under the Department of Health and Human Services. Proposals are due by August 12, 2026, and the solicitation was posted on July 13, 2026, with Andrew Rhoades listed as the primary point of contact.

Nashville Area Indian Health Svc

POSTED

about 17 hours ago

DEADLINE

Facility HVAC Mechanical Equipment Inspection, Maintenance, and Repair Services

Solicitation # STATE 0000000502SL

The State of Missouri, through the Office of Administration, Division of Facilities Management, Design, and Construction, has issued a solicitation for Facility HVAC Mechanical Equipment Inspection, Maintenance, and Repair Services under solicitation number STATE 0000000502SL. This solicitation is open to qualified vendors capable of providing comprehensive HVAC services across state-owned facilities within Missouri, with all work to be performed throughout the state. The solicitation was posted on July 24, 2026, and responses are due by August 10, 2026, at 7:00 PM Central Time. Proposals must demonstrate technical expertise in inspecting, maintaining, and repairing mechanical HVAC systems, including proactive preventive maintenance, emergency repairs, and compliance with state and industry standards. The contracting authority is the Missouri Division of Purchasing, Procurements, and the point of contact for inquiries is Ryan Bulinski, Buyer, reachable at ryan.bulinski@oa.mo.gov. There is no specific set-aside or NAICS code indicated, and the opportunity is open to all eligible contractors without geographic or vendor-type restrictions beyond those mandated by state procurement policies.

PROC OA DIVISION OF PURCHASING PROCUREMENTS

POSTED

about 24 hours ago

DEADLINE

Plumbing and Waterline InstallationThe contract titled Plumbing and Waterline Installation requires the installation of new waterlines and plumbing systems to support the operation of a hydro actuated diverter and the overall wash rack functionality. This subcontract is issued by the Texas Military Department under the North American Industry Classification System code 238220, which corresponds to plumbing, heating, and air-conditioning contractors. The work is intended to ensure proper water flow and system integrity for the wash rack, enabling efficient and reliable operation of the hydro actuated diverter mechanism. All work must be completed by the response deadline of August 24, 2026, and the performance location is within the state of Texas, though specific city or address details are not provided. The solicitation is open for bids through the Texas SmartBuy portal, and the contractor must be prepared to meet all technical and operational requirements tied to the water and plumbing infrastructure upgrades.

Texas Military Department

POSTED

DEADLINE

Hydro Actuated Diverter ReplacementThe contract seeks the replacement and installation of a new hydro actuated diverter along with all associated components and waterlines to fully restore the hydro functionality of the wash rack. This work is essential to ensure the system operates as intended, maintaining operational readiness and efficiency for the facility. The scope encompasses complete removal of the existing diverter system and the secure, compliant installation of the new unit, including all necessary plumbing, connections, and ancillary elements required for proper hydraulic performance. The contract is classified as a subcontract under NAICS code 238220, indicating it relates to plumbing, heating, and air-conditioning contractors. It is issued by the Texas Military Department under the Texas state agency, with a posted date of August 8, 2026, and a response deadline of August 24, 2026, at 8:00 PM. The place of performance and specific location details are not provided, but the work is intended for a wash rack within a Texas Military Department facility. The solicitation is accessible via the Texas SmartBuy portal for interested vendors to review requirements and submit proposals.

Texas Military Department

POSTED

DEADLINE

More opportunities from New York → Centro

Same awarding agency

Certified Payroll and Prevailing Wage Compliance ServicesThis contract encompasses comprehensive support for certified payroll reporting and strict adherence to New York State prevailing wage laws on public works projects. The provider will be responsible for ensuring accurate and timely documentation of employee wages, benefits, and work classifications in compliance with state regulations, facilitating audit readiness and legal compliance for contractors involved in publicly funded construction efforts. Services must align with the North American Industry Classification System code 541214, indicating a focus on accounting, tax preparation, bookkeeping, and payroll services tailored to the unique demands of public sector construction. The opportunity is structured as a subcontract under the organization Centro, operating within New York State, and is open for responses until August 28, 2026. Performance will occur across various project sites within the state, with no specific location designated. The solicitation does not specify a set-aside category, and there is no designated point of contact listed. Interested parties must submit their proposals through the provided online portal by the stated deadline to be considered for award.

Payroll Services

POSTED

DEADLINE

Insurance and Surety ServicesThe contract seeks providers of umbrella and excess liability insurance with a minimum coverage of $1 million to support public sector compliance requirements. It mandates a five-year claims-made reporting tail to ensure extended coverage for claims that may arise after the policy period ends, addressing ongoing liability exposure typical in public sector operations. The solicitation is positioned as a subcontract opportunity under NAICS code 524126, which corresponds to insurance carriers primarily engaged in direct property and casualty insurance, indicating the intent to engage specialist insurers capable of handling complex liability structures. The opportunity was posted on August 7, 2026, with a response deadline of August 28, 2026, and is managed by Centro through its New York office, though no physical address or point of contact details are provided. The contract is open without any set-aside designation, allowing all qualified vendors to respond, and all submissions must be made via the designated online portal.

Direct Property and Casualty Insurance Carriers

POSTED

DEADLINE

Freight and Logistics – U.S.-Flag Vessel TransportThe contract requires the transportation of HVAC equipment via U.S.-flagged vessels for a minimum of 50% of all overseas shipments, ensuring compliance with U.S. cargo preference laws. This obligation mandates that subcontractors prioritize vessels owned, operated, or chartered by U.S. entities, adhering to federal regulations designed to support the national maritime industry and maintain strategic shipping capacity. The work is tied to overseas logistics for HVAC systems, with performance obligations extending to international destinations and requiring strict adherence to documentation, vessel eligibility, and cargo routing standards. The opportunity is posted as a subcontract under the NAICS code 483111, which corresponds to water transportation of freight, and is available through Centro’s procurement platform. Responses are due by August 28, 2026, with the posting date listed as August 7, 2026. There is no specified set-aside classification, and the agency details indicate New York as the organizational location under Centro, though no physical office address or point of contact is provided. All participants must ensure their logistics plans fully satisfy the U.S.-flag vessel requirement, with potential penalties or disqualification for noncompliance.

Deep Sea Freight Transportation

POSTED

DEADLINE

Recycled-Content Materials SupplyThe contract involves the supply of EPA-compliant recycled-content materials, specifically insulation, duct liners, and metal components, for use in HVAC construction projects. These materials must meet environmental standards and be suitable for integration into commercial or institutional heating, ventilation, and air conditioning systems. The opportunity is structured as a subcontract and falls under NAICS code 327310, which pertains to other miscellaneous fabricating and finishing materials. The solicitation was posted on August 7, 2026, with a response deadline of August 28, 2026, at 5:00 PM. The contracting entity is Centro, operating through its New York office, though no specific location details for performance or contact information are provided. Interested parties must submit proposals through the designated portal at the provided web link to be considered for award.

Cement Manufacturing

POSTED

DEADLINE

Specialty Trade Contractor – Electrical Controls IntegrationCentro is seeking a specialty trade contractor to install and integrate electrical controls, thermostats, and monitoring systems for commercial HVAC operations under a subcontract arrangement. The work involves the precise implementation of control technologies to ensure efficient and reliable operation of heating, ventilation, and air conditioning systems across commercial facilities. The contract is classified under NAICS code 238210, which pertains to electrical contractors, and responses must be submitted by August 28, 2026. The place of performance and agency office details are unspecified, but the contracting entity is based in New York. Interested parties should submit their proposals through the provided portal before the deadline to be considered for this opportunity.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

HVAC System Installation – Commercial GradeThe contract calls for the full installation of commercial-grade HVAC systems at transportation facilities, encompassing the design and placement of units, ductwork fabrication and routing, and seamless integration with existing building infrastructure. All work must strictly comply with applicable state and local building, mechanical, and safety codes to ensure operational efficiency, occupant comfort, and regulatory adherence. The scope is comprehensive, requiring skilled labor and technical expertise to deliver a turnkey solution that meets the demanding performance standards of high-traffic public transit environments. The opportunity is posted as a subcontract under NAICS code 238220, indicating it falls within the heating, air conditioning, and refrigeration contracting sector. It was made available on August 7, 2026, with proposals due by August 28, 2026, at 5:00 PM. The contracting entity is Centro, operating under its New York office, though no specific city or detailed address is provided for the place of performance or point of contact. Interested parties must access the opportunity through the official portal linked in the posting to review full requirements and submit responses.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Radiant Heating Modifications

Solicitation # 2026-26-GR

The Central New York Regional Transportation Authority, operating as Centro, is soliciting qualified vendors to perform radiant heating system modifications to ensure full compliance with National Fire Protection Association standards. This project targets the upgrading of an existing heating infrastructure within a facility in New York, requiring technical expertise in industrial and commercial heating systems, fire safety integration, and adherence to NFPA codes. The solicitation, identified by number 2026-26-GR, was posted on August 7, 2026, with responses due by August 28, 2026, at 5:00 PM. The work is to be performed in New York State, and interested parties must submit proposals through the designated online portal. There is no specified set-aside or NAICS code provided, indicating open competition among qualified contractors. All applicants are expected to demonstrate relevant experience, technical capability, and a clear understanding of the safety and regulatory requirements inherent in heating system upgrades.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electronic Invoicing & Payment System IntegrationThe contract involves the management of electronic invoicing through the New York State Comptroller’s e-payment system, requiring precise adherence to standardized formatting rules and the timely resolution of any issues that arise during payment processing. The subcontractor will be responsible for ensuring seamless integration and compliance with state-mandated electronic invoice protocols to maintain uninterrupted financial transactions between the agency and its vendors. This includes monitoring system performance, troubleshooting errors, and implementing corrective actions to uphold payment accuracy and efficiency. The opportunity is posted under NAICS code 541512 and is classified as a subcontract with a response deadline of August 19, 2026. It is managed by Centro on behalf of the New York State agency, though specific location details and point of contact information are not provided. The contract is open to qualified vendors capable of executing electronic invoicing workflows within the state’s designated payment infrastructure, with performance expected to align with New York’s broader financial automation goals.

Computer Systems Design Services

POSTED

DEADLINE

Equal Employment Opportunity (EEO) Reporting & Workforce MonitoringThe contract requires the preparation and submission of EEO-100 and EEO-101 reports through comprehensive collection of demographic and wage data from both prime contractors and subcontractors, ensuring all parties comply with federal EEO reporting requirements. The work involves coordinating with multiple tiers of the supply chain to gather accurate, timely workforce information and validating that flow-down obligations are met across subcontracts, maintaining alignment with regulatory standards. The solicitation is designated as a subcontract under NAICS code 541612 and was posted on July 28, 2026, with a hard deadline for responses set for August 19, 2026, at 5:30 PM. The contracting entity is Centro, operating out of New York, and the place of performance is not specified beyond the agency’s location, with no set-aside provisions indicated. All activities must be completed within the stated timeline to ensure regulatory compliance and accurate federal reporting.

Human Resources Consulting Services

POSTED

DEADLINE

MWBE/SDVOB Subcontractor Utilization & Compliance ReportingThe contract requires the development and submission of MWBE and SDVOB utilization plans to ensure compliance with diversity and inclusion goals on public projects. This includes actively identifying and engaging qualified minority-owned, women-owned, and service-disabled veteran-owned businesses as subcontractors, maintaining detailed records of their participation throughout the project lifecycle, and preparing comprehensive Good Faith Efforts documentation to demonstrate proactive outreach and meaningful attempts to meet utilization targets. The work involves systematic tracking, reporting, and documentation processes to validate compliance with applicable regulatory standards. The opportunity is posted under NAICS code 541611 for management consulting services and is open for response until August 19, 2026, with submissions due by 5:30 PM. It is categorized as a subcontract engagement administered by Centro under the New York agency designation. While no specific set-aside type or location details are provided, the work must be conducted in alignment with state and federal MWBE and SDVOB compliance frameworks, and the successful bidder will be responsible for delivering accurate, timely, and audit-ready reports to support the prime contractor’s obligation to foster equitable subcontracting practices.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

VMware vSphere Licensing Administration & Core ManagementThe contract involves the administration and management of VMware vSphere Foundation 8i core-based licensing, requiring precise oversight of license provisioning, accurate tracking of core count changes across environments, and timely processing of prorated billing credits to ensure cost efficiency and compliance. The scope demands a deep understanding of VMware’s licensing model and the ability to dynamically adjust license allocations in response to infrastructure modifications, with a focus on maintaining accurate records and facilitating transparent financial adjustments. This is a subcontract under NAICS code 518210, issued by Centro through its New York office, with a response deadline of August 19, 2026. The work is performed remotely without a specified physical location, and there is no set-aside classification or point of contact provided. Interested parties must submit their proposals by the stated deadline to be considered for award, and successful bidders will need to demonstrate proven experience in managing VMware licensing operations at scale with attention to financial accuracy and operational integrity.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Virtual Infrastructure Software 2026-2029

Solicitation # 2026-21

The Central New York Regional Transportation Authority, operating as Centro, is soliciting qualified vendors to supply licensing for VMWare V-Sphere Foundation 8 software under the Virtual Infrastructure Software 2026-2029 contract. The solicitation, identified by number 2026-21, was posted on July 28, 2026, with a response deadline of August 19, 2026, at 5:30 PM. This procurement targets vendors capable of providing the necessary software licenses to support Centro’s virtual infrastructure needs across New York State, with performance expected within the state. The contract will cover a three-year period from 2026 through 2029, ensuring ongoing support and compliance with current technology standards. No set-aside classifications are indicated, and all interested parties must submit responses through the designated portal by the stated deadline.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE