Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Defense Component Manufacturing – Rudder Pedal Housing

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture, testing, and delivery of rudder pedal housing units identified by NSN 1680-00-400-3737, all of which must fully comply with applicable military specifications and pass Factory Acceptance Testing to ensure performance and quality standards are met. The work is classified as a subcontract under NAICS code 336412, indicating it pertains to aerospace product and parts manufacturing, specifically for defense-related airframe components. All units must be produced to exacting defense industry standards, with emphasis on reliability, durability, and precise fit for installation in military aircraft systems. The solicitation was posted on July 28, 2026, with a response deadline set for August 7, 2026, giving potential contractors approximately ten days to submit proposals. Performance is expected to be carried out under the oversight of the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. While specific location details for performance or contact information are not provided, the contract is accessible via the DIBBS platform, and successful bidders will be required to meet rigorous acceptance criteria before delivery, with no set-aside provisions specified, meaning the opportunity is open to all qualified entities regardless of business size or status.

General Info

Manufacture, test, and deliver rudder pedal housings to military specs for aerospace defense use.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, test, and deliver rudder pedal housing units (NSN 1680-00-400-3737) in compliance with military specifications and Factory Acceptance Testing (FAT) requirements.

Similar Contracts

Same NAICS industry code

ARM, ACTUATING VANE

Solicitation # SPE4A7-26-T-599K

The contract pertains to the procurement of 5,059 units of an ARM, ACTUATING VANE with NSN 2840-00-199-5235, issued under solicitation SPE4A7-26-T-599K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is classified as technical data subject to U.S. export control regulations, either ITAR or EAR, meaning any transfer, including electronic disclosure to foreign persons within or outside the United States, requires explicit government authorization. DFARS 252.225-7048 governs the handling of this controlled information, and access is restricted to contractors certified under the U.S./Canada Joint Certification Program who have completed mandatory DLA training and approval processes. Delivery is scheduled 547 days after award, with the place of performance located at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, under a NAICS code 336412 indicating aircraft and missile propulsion systems manufacturing. The primary point of contact for inquiries is Mahlon Marcus, reachable via email and phone. The acquisition is designated as a federal procurement with no set-aside classification. All parties handling the technical data must comply with stringent controls to prevent unauthorized disclosure, extending to U.S. companies and their foreign subsidiaries, and DLA mandates additional verification steps before granting access to the controlled technical information.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Military-Grade Component Supply (RIB Unit)The contract requires the supply of two military-grade components identified by NSN 1560-LN-001-5270 and Part Number 449-034-219-151, with strict adherence to technical, quality, and packaging standards applicable to defense equipment. This subcontract is issued under the Department of Defense through the DLA Fleet Readiness Center DLA PSC and is intended for performance at Cherry Point, North Carolina, with a ZIP code of 28533-0021. The solicitation was posted on July 28, 2026, with responses due by August 5, 2026, and is classified under NAICS code 336412, indicating it relates to aerospace product and parts manufacturing. No set-aside provisions or specific point of contact details are provided in the documentation, and the official solicitation can be accessed through the DIBBS portal at the provided online link.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Manufacture of Tail Rotor Blade Dust and Moisture Seals (Boots)The contract is for the manufacture and delivery of 2,926 precision-engineered boots designed to seal tail rotor blades on military rotorcraft, ensuring protection against dust and moisture in demanding operational environments. These components must meet stringent aerospace and defense standards to guarantee reliability, durability, and compatibility with existing military aircraft systems. The work is classified as a subcontract under a Women-Owned Small Business Set-Aside, with the North American Industry Classification System code 336412, indicating the focus on aircraft manufacturing and parts production. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with performance expected to be carried out at a location in Texarkana, Texas, zip code 75507-5000. The contract is managed under the Land Supply Chain division of the Department of Defense, signaling its critical role in sustaining military aviation readiness and logistics.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Reconditioned Torque Tube AssembliesThe contract solicits the procurement, reconditioning, and certification of torque tube actuators identified by NSN 1680-00-438-9161, ensuring full compliance with military specifications. Each unit must undergo rigorous reconditioning processes to restore performance and reliability, followed by certification that confirms adherence to all technical and quality standards. Traceability of components and final assemblies is mandatory, requiring detailed documentation from raw material sources through final inspection. All markings on the actuators must meet military labeling requirements, and packaging must be configured to protect against damage during transit and storage while maintaining environmental and security controls. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division, with the National Aerospace and Defense Contractors Accreditation Program code 336412 indicating specialization in aircraft parts and equipment manufacturing. Responses are due by August 10, 2026, following a posting date of July 28, 2026. The place of performance and official point of contact details are not provided, but all work must be completed in alignment with DLA standards and delivered in accordance with military logistics protocols. Full compliance with packaging, marking, and traceability requirements is non-negotiable, and failure to meet these criteria will result in rejection of the deliverables.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Wiring Harness Manufacturing

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Small Business and Socioeconomic ParticipationSmall, disadvantaged, veteran-owned, and women-owned businesses are invited to participate as subcontractors under Department of Defense socioeconomic programs, with a focus on the NAICS code 336412 related to combat vehicle and armament production. The opportunity is administered by the LSO Combat Vehicles and Armament office under the Department of Defense, and performance is centered at the New Cumberland location with ZIP code 17070-5002. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, providing a limited window for eligible businesses to submit their proposals. Participation is intended to expand inclusion and economic opportunity through targeted subcontracting within defense procurement, though no specific set-aside classification is listed. Interested parties must access the DIBBS platform via the provided link to review full requirements and submit responses before the deadline.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Aircraft Wiring Harness ManufacturingThe contract pertains to the manufacture of aircraft wiring harness sets in strict accordance with military specifications, encompassing all phases from crimping and termination to shielding, assembly, and comprehensive testing, with full traceability mandated under AS9100 and Defense Logistics Agency requirements. This subcontract is focused on delivering high-integrity electrical systems critical to defense aviation platforms, requiring adherence to rigorous quality control, documentation, and compliance standards throughout the production lifecycle. The solicitation is issued under the NAICS code 336412 for Aircraft Parts and Auxiliary Equipment Manufacturing and is associated with the Department of Defense’s LSO Combat Vehicles and Armament office. Performance is required at a designated facility in New Cumberland, Pennsylvania, with a response deadline of August 10, 2026. All work must meet exacting defense standards, ensuring operational reliability and seamless integration into military aircraft systems, with no set-aside provisions specified and the opportunity open to qualified subcontractors capable of fulfilling the technical and regulatory demands.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Precision Aerospace Manufacturing – Structural Plate Fabrication

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

DIAPHRAGM, SPECIAL

Solicitation # SPE4A7-26-T-599D

The contract pertains to the procurement of 47 units of a special diaphragm assembly, bonded, with NSN 2915-01-292-1600, under solicitation SPE4A7-26-T-599D. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting any disclosure or transfer to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and distribution is limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally authorized by DLA to access controlled technical data. The item requires adherence to CMMC Level 2 cybersecurity standards as certified by a C3PAO and enforces specific physical identification and bare item marking requirements. Documentation for source approval must be provided per RC001. Delivery is due within 164 days of award, with performance slated for Tracy, California, 95304-5000. The solicitation was posted on July 28, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Huy Nguyen as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

NOZZLE, STARTER FUEL

Solicitation # SPE7LX-26-U-8795

The contract solicitation SPE7LX-26-U-8795 is for the procurement of 67 units of a Nozzle, Starter Fuel, identified by NSN 2910-00-919-2022, under a Small Business Set-Aside with NAICS code 336412. The item is designated as a Critical Application Item for use on the CH-47 Chinook helicopter and must conform to exacting technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 for packaging. Packaging, marking, and palletization must strictly follow MIL-STD-129 and RP001 DLA Packaging Requirements, with hazardous material labeling compliant with 29 CFR 1910.1200 and exemptions limited to specific federal acts. Delivery is required within 167 days after award, FOB Origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The contract is an Indefinite Delivery Contract with a guaranteed minimum order of 10 units and a maximum total value of $350,000, and pricing is to be submitted without a specified unit price, with payment processed electronically via WAWF. The contract incorporates numerous FAR and DFARS clauses, including those mandating cybersecurity compliance with NIST SP 800-171, prohibitions on hexavalent chromium and toxic materials, employment eligibility verification, combating human trafficking, and safeguarding contractor information systems, with deviations noted for several clauses. Contractors must be registered in SAM, hold a valid UEI and CAGE code, and affirm small business status, with joint venture representations requiring additional disclosures. All proposals must be submitted electronically through DIBBS by the deadline of July 31, 2026, and must adhere to DLA’s automated simplified acquisition protocols, including appropriate representation of socioeconomic certifications and compliance with transportation by sea requirements and safety issue reporting obligations. The award will be made to the most advantageous offeror based on price and other factors, with the Government retaining full authority over inspection, acceptance, and enforcement of all contractual terms.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

SEAL RING, LABYRINTH

Solicitation # SPE4A7-26-T-599J

This solicitation, SPE4A7-26-T-599J, seeks a labyrinth seal ring with NSN 2840-00-352-1989 in a quantity of 233 units for delivery within 640 days after award, with a response deadline of August 5, 2026. The contractor must conduct first article testing on three units of this item and submit a formal test report within 180 calendar days of contract award, providing written notice at least 14 days prior to shipment for government verification. The contracting officer will issue written approval, conditional approval, or disapproval of the test results within 30 days of receipt. The offeror must ensure that no covered telecommunications equipment or services are provided under this contract as mandated by FAR 52.204-24 and DFARS 252.204-7016. Domestic source compliance is strictly enforced under the Berry Amendment and Buy American Act, with a reduced threshold of $150,000; any use of non-domestic materials requires explicit disclosure. Small business joint ventures must submit all applicable certifications for eligibility under the stated categories. Quoters are strongly encouraged to provide quantity ranges in submissions to facilitate efficient procurement decisions, except for Auto IDC, and must submit a “No Bid” notification on DIBBS if unable to quote by the deadline to avoid misunderstandings. All contractors must register through DLA’s Account Management & Provisioning System to access the Vendor Shipment Module and must not use additive manufacturing for this item unless formally approved in advance. Additionally, the vendor must disclose current dealer or distributor certifications and confirm they are not utilizing Fast Pay provisions.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Main Wheel Assemblies (NSN 1630-01-158-5752)The contract solicits the supply of ten brand-new, airworthy Main Wheel Assemblies identified by NSN 1630-01-158-5752, requiring full original equipment manufacturer traceability and a Certificate of Conformance in compliance with FAR 52.246-15. All units must be certified as airworthy and delivered with complete documentation to ensure compliance with federal aviation standards. The solicitation is issued under a subcontract type with a NAICS code of 336412, indicating focus on aerospace component manufacturing. The offering is managed by the Aviation Logistics Center under the Department of Homeland Security and is open for responses until August 18, 2026, with submissions due by 6:00 PM Eastern Time. There is no set-aside designation, and performance location details are unspecified. The opportunity was posted on July 28, 2026, and interested parties must access the complete solicitation through the provided SAM.gov link.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

PANEL, STRUCTURAL, AI

Solicitation # SPE4A7-26-Q-0920

The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.

Fabricated Structural Metal Manufacturing

POSTED

about 11 hours ago

DEADLINE

DUCT ASSEMBLY, AIR COND

Solicitation # SPE4A7-26-Q-0921

The contract is for the procurement of four duct assemblies for aircraft air conditioning and heating systems, identified by NSN 1660-01-138-4412, with a delivery requirement within 300 days after award. The solicitation number is SPE4A7-26-Q-0921, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with a response deadline of August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and been approved by DLA. Packaging, inspection at origin, removal of government identification from non-accepted items, and calibration of test equipment are governed by specific DLA requirements, and all delivered items must adhere to rigorous quality standards applicable to both manufacturers and non-manufacturers.

Sheet Metal Work Manufacturing

POSTED

about 11 hours ago

DEADLINE

TOW COLLAR, LANDING GEA

Solicitation # SPE4A7-26-T-600P

The contract is for the procurement of two TOW COLLAR, LANDING GEAR units with NSN 1620-01-073-1108 under solicitation SPE4A7-26-T-600P, issued by the Department of Defense through the Defense Logistics Agency. The requirement is designated as a Total Small Business Set-Aside under NAICS code 336413, with responses due by August 6, 2026, and delivery expected within 163 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with DLA packaging standards, inspection and acceptance at origin, and the removal of government identification from non-accepted supplies. Physical identification and bare item marking are mandatory, and the item is subject to Covered Defense Information requirements. The technical data associated with this part is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, even within the United States, and only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access the data. Cybersecurity compliance requires CMMC Level 2 certification by a C3PAO, and performance is to occur at Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at DLA.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-600B

This contract is for the procurement of 1,087 units of a spacer sleeve identified by NSN 5365-01-285-9796 and part number NAS42DD6-48N, classified as a commercial item under the DLA acquisition system. The item must comply with a comprehensive set of technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for inspection at origin, government identification removal, physical marking, and test equipment calibration. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s packaging standards, and all labeling must reflect the specified unit of issue and quantity per unit pack. The item is designated as a critical application component and must meet the technical specifications of NAS42 Revision 11 dated 10/31/2012. Delivery is required FOB origin within 86 days, with strict zero tolerance for quantity variance and acceptance also taking place at origin. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and verification levels are assigned based on attribute classification. The contract specifies a unit price and total value but does not include a shelf life requirement. All shipments must be directed to the DLA Distribution Depot at Hill AFB, Utah, with transportation protocols outlined in DLAD Proc Notes C19 and C20. The required delivery date is April 16, 2027, with an initial ship date of November 1, 2026, under solicitation SPE4A7-26-T-600B, issued by the Department of Defense’s ASC Supplier Operations division.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 11 hours ago

DEADLINE

PLATE, STRUCTURAL, AI

Solicitation # SPE4A7-26-T-600A

The contract is for the procurement of 16 structural plates designated for aircraft use, identified by part number 68A350868-2010 and NSN 1560-01-291-2535. The item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled technical data, and have received explicit approval from DLA. Packaging must adhere to DLA procurement standards, and physical identification of the item must follow specified marking requirements. Cybersecurity compliance is enforced through CMMC Level 2 certification for any assessed third-party organizations involved. The solicitation number is SPE4A7-26-T-600A, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 6, 2026, and an expected delivery timeline of 166 days after award. Performance will occur at Robins Air Force Base, Georgia, with Mahlon Marcus listed as the primary point of contact. The NAICS code 336413 applies, indicating the item falls under aircraft manufacturing. No set-aside classification is specified, and the contract is open to federal contractors meeting all export, cybersecurity, and packaging requirements. The technical data associated with the item is tightly controlled, and failure to comply with export regulations or handling protocols will result in contract violation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-599M

This contract pertains to the procurement of 445 blind rivets identified by NSN 5320-01-192-1492 and part number NAS9308M-4-04, manufactured in accordance with Technical Data Package Revision B General 2, compliant with NAS9308 Revision 5 and reference drawing 13873 011921492-19241. The items must meet all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements. Inspection and acceptance occur at origin, following zero-defect sampling protocols under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. All items must be physically marked and labeled as required, with government identification removed from non-accepted supplies. Packaging shall be palletized per RP001, and the unit of issue is each, with no variance permitted in quantity. The delivery schedule requires fulfillment within 84 days of award, with delivery scheduled for October 30, 2026, and an original required delivery date of January 1, 2027. The destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with freight and transportation governed by DLA procedural notes C19 and C20. The contract is issued under solicitation SPE4A7-26-T-599M with a total price of $445.00 per unit for the full quantity, and the point of contact is Brad Ingram of the Department of Defense.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

SPACER, REACTION, IGNITI

Solicitation # SPE4A7-26-T-600N

The contract pertains to the procurement of four units of SPACER, REACTION, IGNITION with NSN 5365-01-230-3095, under solicitation SPE4A7-26-T-600N, with a response deadline of August 6, 2026, and a required delivery within five days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to such controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and DLA questionnaire, and have received formal authorization from DLA. Packaging must adhere to DLA standards, inspection and acceptance occur at the manufacturer’s origin, and non-accepted items must have government identification removed. Covered defense information applies, and tailored higher-level quality requirements are enforced for both manufacturers and non-manufacturers. The solicitation is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Christian Roberson as the primary point of contact.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

DUCT, AIR CONDITIONING

Solicitation # SPE4A7-26-Q-0882

The contract is for the procurement of two duct air conditioning units under NSN 1560-00-878-4950, with a delivery requirement of 282 days after award. It is issued under solicitation SPE4A7-26-Q-0882, with a response deadline of August 10, 2026, and is classified under NAICS code 336413 for aircraft and parts manufacturing. The contract incorporates a comprehensive set of technical and quality requirements referenced from the DLA Master List, including packaging standards, inspection at origin, measurement and test equipment compliance, and configuration change management. Export control is strictly enforced under ITAR or EAR regulations, prohibiting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and applies to all contractors and their subsidiaries. Access to this data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled technical data, and have received formal approval from the DLA controlling authority. Additionally, government identification must be removed from non-accepted supplies, and all work must comply with tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division, reachable via email and phone provided in the contract data.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

BRUSH SEAL, COVER

Solicitation # SPE4A7-26-Q-0886

The contract specifies the procurement of 45 units of BRUSH SEAL, COVER, with each unit measured as 1PG equaling 2EA, resulting in a total of 90 individual items. The item is identified by NSN/Part Number 1680-01-062-1740 and is tied to Purchase Request 7016849191. Delivery is required within 106 days after delivery order. The solicitation number is SPE4A7-26-Q-0886, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 8, 2026, and a posted date of July 29, 2026. Primary point of contact is April Reed, reachable via email and phone provided. This item contains technical data subject to export control under either ITAR or EAR, meaning any disclosure, including to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and only DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export-controlled data training, and approval from the DLA controlling authority are permitted to access this data. Additional requirements include certification as a CMMC Level 2 C3PAO and compliance with physical identification and bare item marking standards. All distribution and handling must strictly conform to DLA’s export control protocols.

POSTED

about 11 hours ago

DEADLINE

FITTING, STRUCTURAL

Solicitation # SPE4A7-26-Q-0928

The contract specifies the procurement of 15 structural fittings with NSN 1560-01-649-2616 under solicitation SPE4A7-26-Q-0928, with a delivery requirement of 250 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The supplier must comply with DLA packaging standards, inspection and acceptance at origin, and strict retention of supply chain traceability documentation as defined in DLA Procurement Note C03 from August 2016. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Export control of technical data is strictly enforced under ITAR or EAR, prohibiting any disclosure to foreign persons without prior authorization, and requires contractors to hold valid US/Canada Joint Certification Program certification, complete mandatory training and DLA questionnaires, and obtain formal approval from DLA to access controlled data. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with point of contact Rekisha Burton, and the solicitation response deadline is August 11, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 11 hours ago

DEADLINE

COUPLING, CLAMP, GROO

Solicitation # SPE4A7-26-T-600H

The contract pertains to the procurement of 30 units of a grooved coupling and clamp identified by NSN 5342-01-254-4624, with a required delivery within 20 days of award. This item is classified as a commercial item and is source-controlled, meaning it must be manufactured and tested using limited rights data associated with Honeywell International Inc. drawing 195792, revision P/N 195792-1, and only vendors with verified access to this data or traceability to approved sources—Eaton Aeroquip Inc and V.I.J. Corporation—are eligible to quote. The procurement is governed by technical and quality requirements referenced in the DLA Master List, with sampling to follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances are required unless otherwise stated. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, requiring compliance with DFARS 252.225-7048 and restricting access to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Documentation for source approval requests must meet RC001 requirements, and packaging must comply with DLA standards. Item Unique Identification is not required per customer request, and the acquisition falls under NAICS code 332510 with a response deadline of August 6, 2026.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE