Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Defense Logistics Agency (DLA) Packaging and Marking Services

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Defense Logistics Agency Weapons Support Fluid Handling Division involves providing specialized military-grade packaging and marking services for prime contractors. The scope of work requires strict adherence to RP001 packaging guidelines and marking standards defined by MIL-STD-129 and MIL-STD-2073-1E. The contractor must utilize military-standard marking equipment and specific preservation materials, specifically QUP:001 and PRES MTHD:10, to ensure all shipments are ready for destination acceptance. The project is categorized under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the response deadline is October 19, 2026. This effort supports the Department of Defense by ensuring that critical fluid handling components are preserved and identified according to rigorous military specifications.

General Info

Military packaging and marking services for DLA, due October 19, 2026, in Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

488510 - Freight Transportation Arrangement

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-0583.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOSE ASSEMBLY, NONMETAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized military-grade packaging and marking for prime contractors on DLA Weapons Support Fluid Handling Division projects. Applies packaging per RP001 and executes marking standards per MIL-STD-129 and MIL-STD-2073-1E. Utilizes military-standard marking equipment and preservation materials (QUP:001, PRES MTHD:10). Delivers properly packaged and marked shipments ready for destination acceptance.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging and marking of one Bearing Unit Housing in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. To ensure compliance with safety and logistics regulations, the provider must adhere to RP001 palletization requirements and guarantee that no mercury is used in the preservation process per IP056. The contractor is responsible for coordinating the final delivery of the processed component to DLA Distribution DDSP New Cumberland. This requirement falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized military-grade packaging, preservation, and marking for bearings to ensure they meet strict DLA acceptance criteria. Technical execution must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, incorporating specific requirements for cleaning, drying, and cushioning. The service provider is required to utilize industrial marking equipment and MIL-SPEC preservation materials to complete the deliverables. This opportunity falls under NAICS code 488510 and was posted on October 11, 2026, with a response deadline of October 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Standard Packaging and FreightThis subcontract for Military-Standard Packaging and Freight, issued by C AND T Supply Chain under the Department of Defense, requires specialized packaging, marking, and transportation services for prime contractors on DLA supply contracts. The contractor is responsible for ensuring all shipments adhere to MIL-STD-2073-1E, MIL-F-2692, and MIL-STD-129 standards, with a strict requirement for zero mercury use. Key deliverables include the packaging and marking of flags and the coordination of their delivery to Arizona Industries for the Blind in Phoenix, Arizona. The scope of work includes managing all necessary shipping documentation to satisfy FAR 52.246-2 acceptance criteria. This opportunity falls under NAICS code 488510 and was posted on October 9, 2026, with a response deadline of October 16, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves the professional packaging, marking, and palletization of electronic components to ensure they are ready for delivery to CONUS stock locations. All operations must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 standards for palletization, with a mandatory requirement that all materials used are mercury-free. The opportunity is categorized under NAICS code 488510 and was posted on October 9, 2026. Interested parties must submit their responses by the deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Component Packaging and MarkingThis subcontract for Aerospace Component Packaging and Marking involves providing specialized packaging and marking services for prime contractors supporting DLA Aviation supply contracts. The scope of work focuses on the processing of bleed air tubes, requiring strict adherence to ASTM D3951 and TQ requirement IP025 for hazardous materials. All packaging must be marked and labeled according to MIL-STD-129, with final palletization executed per RP001 to ensure shipments are compliant and ready for transport. Managed by the Department of Defense under the ASC Supplier OE and AF Division, the project falls under NAICS code 488510. The solicitation was posted on October 9, 2026, with a response deadline set for November 9, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

DLA-Compliant Packaging and Expedited ShippingThis subcontract through the Maritime Supply Chain for the Department of Defense requires specialized packaging and expedited, traceable shipping services for prime contractors on DLA Land and Maritime supply contracts. The provider must ensure all units are packaged using MIL-SPEC materials in strict accordance with RP001, MIL-STD-129, and ASTM D3951 standards. All hardware must be properly labeled and delivered FOB Destination. The scope of work involves coordinating the fastest available traceable freight shipping to the USS John P Murtha LPD 26, specifically excluding the use of parcel post. This requirement falls under NAICS code 488510, with the place of performance located at FPO 96694. Interested parties must respond by October 15, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services involves providing specialized military-grade packaging and marking for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Maritime Supply Chain. The scope of work requires the delivery of six packaged and marked units, adhering strictly to MIL-STD-2073-1E for packaging and MIL-STD-129 for markings. Additionally, the contractor must implement DLA packaging requirement RP001, utilizing specific wraps and cushioning. Successful execution of this contract requires deep expertise in the DLA Master List of Technical and Quality Requirements. The opportunity was posted on October 9, 2026, with a response deadline of October 23, 2026. It is categorized under NAICS code 488510 and is managed through the DLA Weapons Support Maritime Supply Chain ESOC Buys.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves the specialized packaging, marking, and palletization of cable assemblies to ensure they are shipment-ready. All activities must strictly adhere to military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for shipment marking, and DLA RP001 standards for palletization. Technical requirements include the use of E5 unit containers and specific preservation methods, namely CLNG/DRY:1 and PRESV MAT:00. The project falls under NAICS code 488510. Interested parties should note the response deadline of October 23, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military Packaging and Distribution ServicesThis small business set-aside subcontract involves providing specialized packaging and distribution services for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is responsible for packaging, marking, and palletizing items in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Key operational requirements include the coordination and delivery of shipments to DLA Distribution centers located in Barstow, California, and Texarkana, Texas. The successful provider must demonstrate proficiency in using the Wide Area Workflow system for all necessary shipping documentation. Performance of these services is centered in Barstow, California, under NAICS code 488510. Interested parties must adhere to the response deadline of October 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors delivering to the DLA Weapons Support Aviation Supply Chain. The scope of work involves the preservation, packaging, and palletization of shipments to ensure they are fully prepared for delivery to DLA Distribution DDSP New Cumberland. Technical execution must strictly adhere to specific military standards, including MIL-DTL-28786 for packaging, MIL-STD-129 for marking, and MIL-STD-2073-IE for general packaging requirements. Additionally, all palletization must be performed in accordance with DLA requirement RP001. The opportunity is categorized under NAICS code 488510.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

MIL-STD-129 Compliant Packaging and Expedited FreightThis subcontract involves providing specialized military packaging and expedited shipping services for prime contractors supporting the Department of Defense, specifically for DLA Weapons Support Maritime Supply Chain projects. The scope of work requires strict adherence to technical standards, including packaging per ASTM D3951, palletization per RP001, and marking and labeling in accordance with MIL-STD-129. The selected provider is responsible for coordinating the fastest traceable transport to the Anniston Army Depot, ensuring that all shipments are fully labeled, palletized, and tracked until they reach the final destination inspection point. This opportunity falls under NAICS code 488510 and was posted on October 9, 2026, with a response deadline of October 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Preservation and Packaging Services for NSN 5365-01-233-7344This subcontract involves providing military-grade preservation, packaging, and marking services for 2,000 rings under NSN 5365-01-233-7344. The work is performed for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, with final delivery destined for DLA Dist San Joaquin. The contractor must adhere to strict technical specifications, including MIL-PRF-23199 for preservation, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking. Additionally, the scope requires palletization according to RP001 and the use of cushioning as specified in MIL-STD-2073 Appendix J. The opportunity was posted on October 9, 2026, with a response deadline of October 23, 2026, under NAICS code 488510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Aerospace Component Finishing and PlatingThis subcontract, titled Aerospace Component Finishing and Plating, is issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division. The project requires the application of aerospace-approved surface treatments and plating, specifically anodizing or passivating, for machined shafts according to P/N 257733 specifications. The selected contractor is responsible for delivering finished coated shaft components and must perform rigorous quality control, including surface roughness testing and coating thickness verification. A critical requirement for this contract is that the provider must hold NADCAP accreditation for special processes. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813. Interested parties must submit their responses by October 16, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, involves the supply of certified aerospace-grade raw metal stock or forged blanks. The scope of work requires the delivery of certified raw materials for 10 shaft units, with a strict emphasis on supply chain traceability. To meet these standards, the provider must furnish Material Test Reports and Certificates of Conformance in accordance with C03 requirements and ensure full compliance with DFARS Specialty Metals clauses. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210. Interested parties must have submitted their responses by the deadline of October 16, 2026. This procurement ensures that prime contractors receive high-specification materials that meet rigorous aerospace and defense industry certifications.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Precision Manufacturing of Shaft SubassemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the precision machining and assembly of 10 shaft subassemblies for Eaton Aerospace part number 257733. The scope of work requires the use of CNC turning, milling, and grinding on aerospace-grade alloys to meet strict OEM specifications, with quality validation performed via CMM. The opportunity is designated as a total small business set-aside under NAICS code 336413. To be eligible, contractors must comply with the DLA Master List of Technical and Quality Requirements and complete a CMMC Level 2 self-assessment. The response deadline for this requirement is October 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Precision Surface Coating and PlatingThis subcontract for Precision Surface Coating and Plating supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will apply specialized surface coatings and plating for prime contractors, ensuring all components meet a 16 RMS surface finish and adhere to strict corrosion and wear specifications. To maintain environmental standards, all plating processes must be performed without the use of Class I Ozone Depleting Chemicals. Eligible contractors must hold US/Canada Joint Certification Program certification and maintain full compliance with ITAR and EAR regulations. This opportunity falls under NAICS code 332813, with a response deadline set for October 16, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

NDT Inspection and Material CertificationThis subcontract for the DLA Weapons Support Fluid Handling Division involves providing non-destructive testing and material validation services for prime contractors. The scope of work includes performing magnetic particle, liquid penetrant, radiographic, and pressure leakage testing to ensure material integrity. The selected provider is responsible for delivering detailed inspection reports and material certifications. To qualify, contractors must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. Technical requirements specify the use of Level II or III NDT technicians. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Testing Laboratories and Services

POSTED

DEADLINE

Heat Treating and Surface Hardness ServicesThis subcontract for Heat Treating and Surface Hardness Services supports prime contractors on projects for the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work involves providing specialized thermal processing for metal components, specifically focusing on heat treating, stress relieving, and shot peening, as well as performing Rockwell surface hardness testing. All delivered components must be accompanied by the appropriate process certifications to ensure quality and compliance. To be eligible for this contract, providers must maintain US/Canada Joint Certification Program certification and strictly adhere to ITAR and EAR compliance regulations. The opportunity is categorized under NAICS code 332813, with a response deadline set for October 16, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Metal Tube Assembly FabricationThis subcontract involves the fabrication of seven high-precision metal tube assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The project requires extreme technical precision, with machining and forming specifications demanding tolerances of .001 inch or less and surface finishes of 16 RMS or less. To be eligible, contractors must maintain rigorous industry certifications and security clearances, including SAE AS9100, US/Canada Joint Certification Program certification, and CMMC Level 2. Additionally, the provider must hold ITAR/EAR authorization to handle the sensitive nature of these defense components.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

HOSE, AIR BREATHING

Solicitation # SPE7M4-27-T-0591

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-27-Q-0039

Solicitation SPE7M4-27-Q-0039 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of seven metal tube assemblies, identified by NSN 4710-00-797-0040. These items are designated as Critical Safety Items, requiring 100 percent inspection of heat treating, stress relieving, and surface hardness. The required delivery timeline is 300 days after the date of order, with a material need ship date of October 31, 2027. Inspection and acceptance will occur at the origin, and the contract is issued under the First Destination Transportation program for delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The procurement is subject to strict technical and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorizations. Award will be based on the best value to the Government, evaluating past performance, offered delivery, and price. Contractors must utilize the Wide Area WorkFlow system for electronic invoicing and comply with various FAR and DFARS clauses, including those regarding the Buy American program and safeguarding covered defense information.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M4-27-Q-0040

Solicitation SPE7M4-27-Q-0040 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 10 units of Shaft, Subassy (NSN 1420-00-961-5009), corresponding to Eaton Aerospace LLC part number 257733. This procurement is designated as a total small business set-aside under NAICS code 336413. The required delivery date is 300 days after order award, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. The contractor must adhere to strict technical and quality standards, including packaging per ASTM D3951 and palletization according to RP001, with all DLA Master List requirements taking precedence. Marking and labeling must comply with MIL-STD-129. Key compliance mandates include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to various DFARS and FAR clauses regarding cybersecurity, foreign entity restrictions, and small business subcontracting. Invoicing and receiving reports are to be processed electronically via the Wide Area Workflow system. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Sediment Strainer Supplier (NSN 4730-01-340-5971)This subcontract involves the procurement of 20 sediment strainers for the Department of Defense DLA Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing units that strictly adhere to NSN 4730-01-340-5971 and the DLA Master List of Technical and Quality Requirements. Notably, the use of additive manufacturing is prohibited for this project. All items must be packaged according to ASTM D3951, RP001, and MIL-STD-129 standards. The contract requires compliance with DFARS cybersecurity reporting and specifies that the 20 completed strainers be delivered FOB Origin to Winchester, Tennessee. The response deadline for this opportunity is October 19, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Nonmetallic Tubing (NSN 4710-01-662-6922)This subcontract involves the supply of 11 units of nonmetallic tubing for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The required tubing must be manufactured or sourced according to Isometrics Inc part number 1060-03-03 and NSN 4710-01-662-6922, with delivery terms set as FOB Origin. The contractor must adhere to strict military standards, including MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking. Additionally, the agreement mandates compliance with DFARS 252.204-7012 and requires a shelf life certification of 120 months. Performance for this contract is centered in New Cumberland.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS