Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Dental Instrument Procurement and Supply

Active

Federal

Response Deadline07/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement, packaging, labeling, and delivery of a single dual-ended dental chisel identified by NSN 6520-01-735-6318, fully compliant with military and federal logistics regulations, safety protocols, and hazardous materials handling standards. All work must adhere to the stringent requirements set by the Department of Defense to ensure compatibility with the Medical Supply Chain FSH inventory systems and operational readiness. The item must be properly documented and labeled to meet federal specification for traceability, sterilization, and storage, with delivery destined to an FPO address ending in 09587. This is a subcontract opportunity posted on July 16, 2026, with a response deadline of July 23, 2026, under NAICS code 339114 for Dental Equipment and Supplies Manufacturing. The solicitation is managed through the DLA Troop Support system under the reference SPE2DH26T5255, and bidders must ensure full alignment with DoD supply chain procedures, including certification for defense logistics compliance, though no specific set-aside provisions are outlined. All parties involved are expected to deliver a fully qualified, ready-for-issue medical instrument meeting exact government specifications without deviation.

General Info

Procure, package, label, and deliver NSN 6520-01-735-6318 dental chisel to FPO 09587 per DoD standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339114 - Dental Equipment and Supplies ManufacturingView NAICS

Place of Performance

FPO, AE, 09587, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 23

Submission deadline

Response Deadline

07/23/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement, packaging, labeling, and delivery of a single dual-ended dental chisel (NSN 6520-01-735-6318), compliant with military and federal logistics, safety, and hazardous materials standards.

Similar Contracts

Same NAICS industry code

6520--Sources Sought: Digital Scanning, Intraoral System, workstations, and software.The Department of Veterans Affairs, through its VISN 02 Network Contracting Office, is seeking information from potential vendors capable of providing a complete digital dental intraoral scanning solution including five intraoral scanners, five Dell Precision 7680 mobile workstations, Design Studio software, and all necessary hardware, accessories, and support services. The system must meet strict technical specifications including wireless operation, FDA 510(k) clearance, high-definition scanning at 2400 images per second, AI-assisted features for pathology detection and scan alignment, patient engagement applications, seamless integration with dental labs and practice management systems, and full compatibility with MOVE Pro and model builder tools. The solution must include remote onboarding and clinical workflow training, a one-year complimentary warranty, rechargeable battery operation, and support for both reusable and disposable scanning tips, with secure digital case management and export capabilities. All equipment must be domestically manufactured in the United States, and responses must include detailed evidence demonstrating how the proposed solution meets or exceeds each salient characteristic. Vendors are required to disclose their business size classification under NAICS code 339114 (750 employees), their entity type such as SDVOSB, VOSB, WOSB, or large business, and whether they are the manufacturer, distributor, or reseller. Large businesses must identify any authorized distributors, while small business resellers must specify if they alter or modify the equipment. Pricing information is encouraged for market research only and will not influence awards. The response must include the company’s Sam.gov Unique Entity ID and confirm if the vendor holds any federal contracts such as GSA Schedule, NAC, or NASA SEWP. Submissions must be sent via email to Jonatan.Rondon@va.gov no later than July 30, 2026, at 1600 EST, and this sources sought notice is strictly for planning and market research purposes—it does not constitute a solicitation or guarantee of future procurement.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 21 hours ago

DEADLINE

Specialized Medical Packaging and Labeling ServicesThe contract encompasses specialized packaging, preservation, and labeling services for medical components in strict compliance with MIL-STD-2073-1E, MMS No. 1, and DLA RP001 standards, ensuring all items meet military-grade requirements for durability, traceability, and environmental protection. Critical elements include the application of ZZ marking and barcoding to enable accurate identification and inventory control throughout the defense supply chain, with procedures designed to maintain the integrity and readiness of medical supplies during storage and transit. This subcontract is issued under the Defense Logistics Agency, part of the Department of Defense, and falls under NAICS code 339114, indicating focus on medical equipment and supplies manufacturing with packaging as a core function. The work is performed to support federal defense logistics operations, with the contract publicly accessible via the DIBBS system under award number SPE2DS26P2401. All activities are oriented toward ensuring standardized, reliable, and fully traceable packaging solutions for mission-critical medical components used by U.S. military forces.

Defense Logistics Agency

POSTED

DEADLINE

Medical Device Packaging and Preservation ServicesThe contract requires the provision of contamination-free packaging, preservation, and labeling services for medical cervical supports, strictly adhering to the military standards MIL-STD-2073-1E and MIL-STD-129 to ensure product integrity and compliance with defense logistics protocols. The work must be performed at Nellis AFB, Nevada, with all packaging and labeling procedures designed to maintain sterility and readiness for military medical supply chains. The contract is structured as a subcontract under the Department of Defense, specifically managed by the Medical Supply Chain MD Surg FSF, and is classified under NAICS code 339114 for medical equipment and supplies manufacturing. Proposals must be submitted by July 22, 2026, with the solicitation posted on July 16, 2026, providing a six-day window for responses. The requirement emphasizes zero tolerance for contamination throughout the entire packaging lifecycle, from initial handling to final seal, ensuring devices remain viable for field deployment in surgical and trauma scenarios. Compliance with standardized military marking and documentation rules is mandatory, and failure to meet the specified standards could result in rejection of delivered units. The place of performance and regulatory framework indicate this is a federally mandated support function critical to the U.S. military’s medical readiness posture.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Packaging and Labeling Services

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Disposable Dental Surgical Burrs SupplyThe contract entails the supply of sterile, single-use dental surgical burrs specified as FG 2, No. 2 round, with a 1.0mm head and 31-FG shank, packaged in quantities of 25 per unit. All items must meet strict medical labeling standards, including proper identification, sterilization status, and batch traceability, and must comply with hazardous material handling protocols due to potential sharps and material risks. Shipping must be fully traceable from manufacturer to point of delivery, ensuring chain-of-custody integrity throughout logistics. The solicitation is classified as a subcontract under NAICS code 339114, issued by the Department of Defense through the Medical Supply Chain FSH, with performance located at FPO, ZIP 96672-4090. Responses are due by July 23, 2026, and the opportunity was posted on July 16, 2026, with no set-aside provisions indicated.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Manufacturing of Dental Ligature Wire (Stainless Steel, Medical Grade)The contract requires the production of medical-grade stainless steel dental ligature wire adhering to stringent DLA and military specifications, encompassing the full manufacturing lifecycle from raw material sourcing to final packaging and labeling. All processes including drawing, cutting, quality control, and documentation must meet established medical and military standards to ensure safety, consistency, and performance in clinical use. The work must be performed in compliance with relevant industry regulations and certified quality systems to guarantee traceability and reliability of the final product. The solicitation, issued under the NAICS code 339114 for medical equipment and supplies manufacturing, is structured as a subcontract opportunity with a response deadline of July 23, 2026. The place of performance is designated as FPO with a ZIP code of 96672-4090, indicating delivery to military facilities overseas or in transit. The agency responsible is the Department of Defense under the Medical Supply Chain FSH, signaling the end use is for military medical applications. Bidders must be prepared to meet exacting military requirements for material composition, dimensional tolerances, sterilization compatibility, and labeling to ensure seamless integration into defense medical supply systems.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

CHISEL, DENTALThe contract specifies the procurement of a dual-ended dental chisel instrument identified by NSN 6520-01-735-6318, with a quantity of one unit, intended for forming line angles on anterior dental preparations. The instrument is categorized as a dental hoe and must meet technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation or award date. Packaging must adhere to DLA procurement standards, and all supplies must be free of government identification if not accepted. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under number SPE2DH-26-T-5255, was posted on July 16, 2026, with responses due by July 23, 2026. Delivery is required within 20 days after order placement, and performance is to be directed to FPO, 09587. The contracting activity is under the Department of Defense, specifically the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

WIRE, LIGATURE, DENTALThe product is a 24 gauge, 0.020 inch stainless steel dental ligature wire sold in a 4 oz spool, intended for stabilizing and fixing jaw fractures by wiring the jaws together. It is identified by NSN 6520-01-681-7312 with a unit of issue of each, and the solicitation requests one unit for delivery within 20 days. The contract is issued under solicitation number SPE2DH-26-T-5277 by the Department of Defense through the Medical Supply Chain FSH, with a response deadline of July 23, 2026. The product must meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA procurement guidelines. The supplier must provide the source and part number, and any non-accepted supplies must have government identification removed. This procurement is subject to regulations covering defense information and requires compliance with federal acquisition rules for medical devices.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

FLITER, AIR DENTALThe contract specifies the procurement of one unit of an air dental filter, identified by NSN 6520-01-530-3027 and manufacturer part number 24-0469-00 from A-DEC INC, under solicitation SPE2DH-26-T-5246. The item is regulated by the FDA, requiring the contracting official to submit a referral in EBS for confirmation, including bidder and manufacturer details. Delivery is due within 20 days to the destination FPO AP 96607 aboard the USS GEORGE WASHINGTON CVN 73, with FOB destination terms, zero quantity variance, and inspection and acceptance occurring upon delivery. Packaging must comply strictly with DLA Packaging Requirements for Procurement and Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier transport at the lowest rate. The item is not classified as hazardous under FED-STD-313 and must be packaged per ASTM D3951, unless otherwise overridden by DLA’s Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are prohibited from direct contact with the item, with exceptions limited to functional uses like batteries or sensors, which must meet strict containment standards per NAVSEA 5100-003D. All labeling, marking, and palletization must adhere to documented DLA standards, and transportation logistics are governed by DLAD Procurement Notes C19 and C20. The contract is governed by technical and quality requirements from the DLA Master List, effective as of the solicitation issue date.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

CLEANING COMPOUND, DENTThe contract is for a 500-milliliter can of AQUACARE cleaning spray specifically formulated for use with air-driven dental handpieces, identified by NSN 6520-01-675-6678 and issued under solicitation SPE2DH-26-T-5271. The unit of issue is one can per contract line, with a single unit requested and a delivery requirement of 20 days after award. Technical and quality specifications referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is subject to hazardous materials regulations, requiring compliance with 49 CFR and ICAO standards for packaging and transportation. A current Material Safety Data Sheet (MSDS) must be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet P-75, and a physical copy of the MSDS must accompany each shipment. Government identification must be removed from non-accepted supplies, and DLA packaging requirements apply. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact, and performance is required at an FPO location with ZIP 96672-4090. The solicitation was posted on July 16, 2026, with responses due by July 23, 2026, under a federal procurement framework with NAICS code 339114.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

ABUTMENT, DENTAL IMPThe contract pertains to the procurement of dental implant healing abutments, specifically 3.5 mm by 3 mm units manufactured by Esthetic Dental Solutions, supplied sterile and sold individually. Each unit is identified by NSN 6520-01-518-1307 with a total quantity of three units required under purchase request 7017473605. Delivery must be completed within 20 days of award, with the place of performance listed as APO 09853. The solicitation number is SPE2DH-26-T-5241, issued on July 16, 2026, with responses due by July 23, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date, depending on acquisition size. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. Covered defense information provisions apply, and bidders are required to clearly specify the source and part number being offered. Primary point of contact is Tina Vu, reachable via email and phone provided.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

CALCIUM HYDROXIDE PASTCalcium Hydroxide Paste Dental is a radiopaque, antimicrobial endodontic dressing with a high pH level of 12.5, supplied in 1.2 mL syringes as part of the Ultracal XS Kit. Each kit includes four syringes and twenty assorted 29-gauge Navitip tips, five of each length, designed for precise application in root canal treatment. The material is corrosive and must be stored at room temperature. The item is categorized under NSN 6520-01-686-3975 with a unit of issue of kit, and the contract specifies a quantity of two kits for delivery within twenty days after order. It is subject to a non-extendable shelf life of twenty-four months, classified as a Type I Code M item under DLA’s shelf-life requirements. Packaging must comply with DOD specifications and applicable hazardous materials regulations including 49 CFR and ICAO standards. A current Material Safety Data Sheet (MSDS) is required and must accompany each shipment, submitted via DLA’s designated email portal along with the required cover sheet. The solicitation falls under the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the RFP issue date. Government identification must be removed from non-accepted supplies, and the item is considered covered defense information. The contracting office is the Department of Defense Medical Supply Chain FSH, with primary contact Tina Vu, and the procurement is tied to solicitation SPE2DH-26-T-5275, issued July 16, 2026, with responses due by July 23, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

TUBE, SAYBOLT VISCOSThe contract pertains to the procurement of TUBE, SAYBOLT VISCOS under NSN 6630-00-399-2968, with a requested quantity of four units. The solicitation number is SPE2DH-26-T-4253, posted on June 2, 2026, and responses are due by June 9, 2026. This is a federal solicitation issued by the Defense Logistics Agency under the Department of Defense, targeting suppliers within the North American Industry Classification System code 424690, which covers miscellaneous nondurable goods wholesalers. The place of performance and office address details are not specified, but the contract is administered within the United States. All inquiries and submissions must be made through the official DIBBS portal linked in the contract data.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

Domestic and International Shipping with U.S.-Flag Vessel ComplianceThis contract requires the arrangement of ocean transportation using U.S.-flag vessels in strict accordance with DFARS 252.247-7023, ensuring compliance with federal regulations mandating the use of American-owned and -operated vessels for certain government shipments. The contractor must document all diligent efforts made to secure compliant carriers, including outreach, negotiations, and substantiation of attempts when U.S.-flag options are limited or unavailable, and must submit ocean bills of lading no later than 30 days after the shipment date to verify adherence to the requirements. The work is classified as a subcontract under NAICS code 483111, associated with the Department of Defense’s Medical Supply Chain FSH, with performance centered at Fort Bragg, North Carolina, and the deadline for response is July 23, 2026.

Deep Sea Freight Transportation

POSTED

DEADLINE

Military-Compliant Packaging and MarkingThe contract requires the packaging, preservation, and marking of medical supplies in strict accordance with MMS No. 1 and MIL-STD-2073-1E standards, ensuring all items meet military specification for handling, storage, and transport. This includes the application of bar-code labeling for accurate inventory tracking and the use of commercial shipping containers that are approved for military distribution systems, guaranteeing durability and compliance throughout the supply chain. All work must align with the Defense Logistics Agency’s protocols to maintain operational readiness and logistical integrity. The solicitation is issued as a subcontract under the NAICS code 561990, with a performance location at Fort Bragg, North Carolina, and a response deadline of July 23, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, indicating this effort supports critical military medical logistics. There is no set-aside designation, and the opportunity is open to qualified subcontractors capable of fulfilling stringent military packaging and marking requirements without deviation.

All Other Support Services

POSTED

DEADLINE

Hazardous Materials Packaging and LabelingThe contract requires the provision of hazardous materials compliance services specifically for thermometers containing bio-safe glycol, focusing on adherence to OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 regulations. Services include the development and application of HAZCOM labeling, preparation of material safety data sheets, and the submission of accurate hazard warning labels to ensure proper handling, storage, and transport of the chemical-containing devices. All deliverables must conform to federal safety standards for chemical communication and defense acquisition requirements, with strict attention to labeling accuracy and regulatory documentation. The contract is classified as a subcontract under NAICS code 561990 and is managed by the Department of Defense through the Medical Supply Chain FSH office. Performance is expected to occur at Fort Bragg with a ZIP code of 28310. The solicitation was posted on July 16, 2026, and responses are due by July 23, 2026. While no set-aside designation is specified, bidders must be prepared to meet all federal compliance obligations and deliver full documentation for audit and verification purposes. The contract is accessible through the DIBBS system under solicitation number SPE2DH26T5239.

All Other Support Services

POSTED

DEADLINE

Supply of Incubator Thermometers (Medical Devices)The contract requires the supply of compact, non-breakable 30ml plastic thermometers specifically designed for use in incubators, with specifications including spirit-filled contents using bio-safe glycol, NIST-traceable calibration, and a PTFE safety coating for enhanced durability and chemical resistance. Each thermometer must feature a double magnet mounting system for secure attachment and be certified as Accu-Safe to meet stringent medical safety standards. The devices must accurately measure temperatures within the range of +18°C to +50°C with 0.5-degree graduations to ensure precise environmental monitoring in sensitive medical settings. This subcontract is issued by the Department of Defense under the MEDICAL SUPPLY CHAIN FSH, with performance required at Fort Bragg, North Carolina, 28310. The solicitation, identified by the reference SPE2DH26T5239, falls under NAICS code 339113 for medical and surgical instrument manufacturing. The opportunity was posted on July 16, 2026, with responses due by July 23, 2026. All submitted products must comply fully with the technical and certification requirements, and vendors are expected to demonstrate conformance without reliance on external documentation or references.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

International Logistics & Ocean Transport CoordinationThe contract requires coordination of ocean freight shipments from the United States to Osan Air Base in South Korea, with full responsibility for managing all logistics tied to maritime transport. It includes the mandatory submission of MARAD bills of lading and handling any necessary waiver requests to ensure compliance with federal regulations and delivery timelines. The work falls under NAICS code 488310, indicating a focus on international freight forwarders and related logistics services, and is classified as a subcontract under the Department of Defense’s Medical Supply Chain FSH. The solicitation was posted on July 16, 2026, with responses due by July 23, 2026, and performance will be centered on enabling secure and timely delivery to a U.S. military installation in South Korea.

Port and Harbor Operations

POSTED

DEADLINE

Medical and Technical Supply Packaging & LabelingThe contract requires the provision of compliant packaging and labeling for medical and technical supplies in strict accordance with Medical Marking Standard No. 1, ensuring all items are contained in sealed unit containers with accurate hazard and medical markings. This includes adherence to standardized identification, safety symbols, and regulatory requirements necessary for handling, storage, and transport within military and healthcare environments. The work is governed by a subcontract arrangement under the Department of Defense’s Medical Supply Chain FSH, with performance expected to meet exacting federal compliance benchmarks. All responses must be submitted by July 23, 2026, with the solicitation issued on July 16, 2026 under NAICS code 561910 for other support activities for manufacturing. The contract does not specify a set-aside category or a defined place of performance, indicating flexibility in execution location. Access to detailed requirements is available through the official DIBBS platform, and bidders are expected to fully understand and implement the marking standards without ambiguity to ensure readiness and safety in operational medical supply chains.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the preparation and ongoing maintenance of Safety Data Sheets for all hazardous materials used in support of the Department of Defense’s Medical Supply Chain, ensuring full compliance with OSHA regulations, the Defense Federal Acquisition Regulation Supplement, and Federal Standard No. 313. These SDS documents must be accurately developed and kept current prior to the contract award, reflecting the chemical composition, hazards, handling procedures, and emergency measures for each substance. The requirement is critical to operational safety and regulatory adherence within DoD supply operations, where improper documentation could compromise personnel health and mission readiness. The solicitation is issued as a subcontract under NAICS code 541690, categorizing it as an other scientific and technical consulting service, with a response deadline of July 23, 2026. While no specific location or point of contact is provided, performance is expected in support of the broader Medical Supply Chain operations under the Department of Defense. The contract does not specify a set-aside status, indicating it is open to all qualified offerors. Compliance with all applicable federal and defense standards is non-negotiable, and failure to deliver complete, accurate, and up-to-date SDS documentation will result in disqualification or non-performance.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Petroleum Hydrocarbon Detection TubesThe contract calls for the supply and delivery of ten capillary tubes specifically designed to detect petroleum hydrocarbons within a concentration range of 20 to 500 parts per million, intended for use with an electronic detector system. These tubes are critical components in environmental monitoring and contamination detection, ensuring accurate and reliable identification of hydrocarbon presence in field or laboratory settings. The contract is structured as a subcontract under the NAICS code 334516, indicating it pertains to the manufacturing of instrumentation for measuring and testing environmental or physical properties. The solicitation was posted on July 16, 2026, with responses required by July 23, 2026, and is managed by the Department of Defense through its Medical Supply Chain FSH office, suggesting the tubes may support military or defense-related environmental health or safety operations. While specific performance locations and contact details are not provided, the contract is accessible via the DIBBS platform for vendors seeking to respond.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Packaging, Labeling, and Military Marking ServicesThe contract requires full compliance with MIL-STD-129 and DLA’s RP001 standards for all packaging, labeling, and military marking activities tied to the shipment of items identified by National Stock Numbers. This subcontract, issued under NAICS code 561910, is part of the Medical Supply Chain FSH initiative within the Department of Defense, with performance located at Dyess Air Force Base, Texas, 79607-1367. All work must adhere strictly to military specifications for identification, labeling, and packaging to ensure seamless integration into DoD logistics systems. Responses are due by July 23, 2026, and the opportunity was posted on July 16, 2026. The contract does not specify a set-aside type or point of contact, and the place of performance is fixed at Dyess AFB. Contractors must be prepared to meet the rigorous documentation and marking requirements of DLA’s RP001 and MIL-STD-129 to support military supply chain operations, with non-compliance likely resulting in rejection of delivered goods.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract seeks specialized services to ensure full compliance with hazardous materials regulations by providing comprehensive hazard communication support, including the preparation of Safety Data Sheets, accurate identification of hazardous substances, and the development and submission of warning labels that meet both DFARS and OSHA standards. All deliverables must align with federal defense requirements and be executed in accordance with strict regulatory timelines to support operational safety and legal compliance within military supply chain operations. This subcontract is issued under NAICS code 541620 and is tied to the Department of Defense through the Medical Supply Chain FSH office, with performance required exclusively at Dyess Air Force Base, Texas, ZIP 79607-1367. The solicitation was posted on July 16, 2026, and responses are due by July 23, 2026, with no set-aside designation specified, indicating open competition. Proposals must demonstrate technical expertise in regulatory compliance, proven experience with DoD protocols, and the capacity to deliver accurate, timely documentation critical to safe handling and transportation of hazardous materials in a military context.

Environmental Consulting Services

POSTED

DEADLINE

Medical Restraint Set SupplyThe contract involves the supply of a complete medical restraint set compliant with FDA and military standards, including wrist and ankle restraints, 36-inch and 48-inch belts, a universal lock and key system, and a dedicated restraint bag. All components must meet rigorous safety and performance requirements to ensure secure, humane, and standardized use in medical and tactical environments. The contract is structured as a subcontract under the Department of Defense, specifically managed by the Medical Supply Chain FSH, with performance required at Dyess Air Force Base, Texas, 79607-1367. The solicitation was posted on July 16, 2026, with a strict response deadline of July 23, 2026, and is classified under NAICS code 339113, which pertains to surgical and medical instrument manufacturing. Although no set-aside provisions are specified, the procurement is open to qualified subcontractors capable of delivering certified, standardized restraint systems. All products must be fully functional, tamper-resistant, and designed for durability under demanding operational conditions. The contract details are accessible via the DIBBS platform for interested parties seeking to submit proposals.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE