Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Depot-Level Repair of Electronic and Mechanical Components

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a response deadline set for November 4, 2026. Interested parties must submit their responses by the specified cutoff date via the official supplier portal.
Washington Metropolitan Area Transit Authority

POSTED

about 3 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
Fuel Dispenser Technical Installation & Repair
Pakistan State Oil Company Ltd

POSTED

about 5 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)
Solicitation # RF-32079-AS
Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.
Pakistan State Oil Company Ltd

POSTED

about 5 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Fisher Recirculation Valve and Actuator DCI and Overhaul
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
WEG Industrial Motor DCI and Overhaul
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Sulzer Boiler Feedwater Pump DCI and Overhaul
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Pump Refurbishment (Add-Alternate No. 3)
Nassau Community College

POSTED

about 12 hours ago

DEADLINE

in 22 days
NAICS: 811310
New
WINDOW AY — 1680016170785 — N0038327QAA17
Solicitation # N0038327QAA17
Solicitation N0038327QAA17, issued by Navsup Weapon Systems Support for the Department of the Navy, seeks a contractor for the teardown, evaluation, repair, and modification of two window assemblies, identified by NSN 1680-01-617-0785. The requirement covers an induction period of one year from the date of the order, with a delivery timeframe of 90 days and shipping terms set as FOB Destination. Final inspection and acceptance will be conducted by the Contract Administration Office at the contractor's location. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073 and MIL-STD-129, with specialized labeling requirements for Depot Level Repairable items. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American program and cybersecurity reporting standards.
Navsup Weapon Systems Support

POSTED

about 12 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Annual And Periodic Inspections And Maintenance And Repair Services Of Port Authority Trans-Hudson Corporation (Path) Emergency Diesel And Natural Gas Generators -Three Year Contract
Solicitation # 2140379
The Port Authority of New York and New Jersey is soliciting bids for a three-year contract to provide annual and periodic inspections, maintenance, and repair services for emergency diesel and natural gas generators used by the Port Authority Trans-Hudson Corporation (PATH). This procurement, identified by solicitation number 6000003543 and NIGP code 28539, is focused on stationary generators. A pre-bid meeting will be conducted via Microsoft Teams on November 9, 2026, from 10:00 a.m. to 11:00 a.m. ET to review the requirements and solicitation documents. Bids must be submitted electronically through the Euna portal by the deadline of November 18, 2026. The Port Authority emphasizes a commitment to non-discrimination in accordance with Title VI of the Civil Rights Act of 1964, ensuring full and fair opportunity for all businesses regardless of race, color, national origin, age, or disability. Procurement operations are managed from 150 Greenwich Street, 21st Floor, New York, New York, and interested parties can contact the Procurement Operations Bid/RFP Custodian via email at [email hidden] or by phone at [phone hidden] for assistance.
The Port Authority of New York and New Jersey

POSTED

about 12 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Commercial Kitchen Equipment Repair ServicesThis subcontract for Commercial Kitchen Equipment Repair Services involves providing inspection, diagnosis, and repair of kitchen machinery for prime contractors working on Arizona Department of Corrections, Rehabilitation & Reentry facility projects. The selected provider is responsible for troubleshooting equipment according to industry standards and manufacturer specifications, supplying all required tools and diagnostic equipment, and ensuring all machinery is fully operational through a final visual walkthrough. Due to the nature of the work locations, personnel must obtain and maintain necessary security clearances to access secured prison perimeters. This opportunity is categorized under NAICS code 811310, with a response deadline of December 18, 2026.
Arizona Department of Corrections

POSTED

about 17 hours ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

This subcontract opportunity with the Department of Defense, specifically Navsup Weapon Systems Support, involves the depot-level repair, overhaul, and testing of electronic and mechanical components. The selected provider will utilize military technical data packages to perform fault isolation, reassembly, calibration, and functional testing to ensure all components are restored to their original performance specifications. The project falls under NAICS code 811310 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of August 28, 2026.

General Info

DoD subcontract for depot-level repair and testing of electronic and mechanical components.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0038325RP458.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

58--RECEIVER,INFRARED, IN REPAIR/MODIFICATION OF

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform complete depot-level repair, overhaul, and testing of electronic and mechanical components using military technical data packages (TDPs), including fault isolation, reassembly, calibration, and functional testing to restore original performance specifications.

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 335312
New
Federal
PANEL,CONTROL,ELECT
Solicitation # N0038326QAA77
Solicitation NO0383-26-Q-AA77, issued by NAVSUP Weapon Systems Support, seeks a contractor to provide repair, overhaul, and modification services for electrical control panels (NSN 6110-01-433-5020). The contractor is responsible for providing all necessary facilities, labor, materials, and tooling to return units to a Ready For Issue condition. Key technical requirements include adherence to MIL-STD-130 for markings, the prohibited use of MIL-W-81381 wire in favor of SAE-AS22759, and compliance with ISO 9001/SAE AS9100 quality standards. The scope includes strict protocols for handling items determined to be Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair, all of which require written concurrence from DCMA and the Procuring Contracting Officer. The government intends to make a single award based on a trade-off between price and past performance, with past performance weighted as the more important factor. Deliveries are expected within 90 days, with Repair Turnaround Time measured from asset return to acceptance at the origin. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for electrostatic protection and Depot Level Repairable labeling. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The resulting contract will be a DO rated order certified for national defense.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
CABLE ASSEMBLY,ROTA
Solicitation # N0038327QAA18
This fixed-price solicitation, issued by Navsup Weapon Systems Support Philadelphia, is for the overhaul, upgrade, repair, testing, and inspection of the Cable Assembly, ROTA (NSN 1680-01-661-7957, Part Number 5217008-110). The primary objective is to return these assets to a Ready For Issue (RFI) condition, ensuring they perform reliably in their intended operational environment. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, with a specific prohibition against using MIL-W-81381 wire, requiring SAE-AS22759 series wire instead. The contract includes a one-year induction period from the date of award, after which any assets received require bilateral agreement for repair. Performance is governed by strict quality and timing requirements, including a defined Repair Turnaround Time (RTAT) and throughput constraints. The contractor must maintain a quality system conforming to ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. Key administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and the adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. Award evaluation will prioritize past performance as the primary factor, followed by price as the secondary factor, with the government utilizing the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
GUARD,GASOLINE ENGI
Solicitation # N0038327QTA11
Solicitation N0038327QTA11, issued on October 8, 2026, by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the procurement of a Gasoline Engine Guard, identified by NSN 2810-01-737-5535. The government intends to make a single award to a responsible offeror based on a best-value determination where past performance is considered more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings, while price serves as a secondary factor. Quotations are due by November 9, 2026, and the required delivery period is 90 days FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipments. Contractors must comply with cybersecurity standards outlined in NIST SP 800-171 and DFARS 252.204-7012. Quality management compliance with ISO 9001 or SAE AS9100 is required, and inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment, and compliance with the Buy American and Balance of Payments Program. Offerors must also provide hazardous material certifications and safety data sheets if applicable.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
Federal
66--INDICATOR,ATTITUDE, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBB18
This solicitation, issued by NAVSUP Weapon Systems Support Philadelphia, is a Request for Quotations for the repair, overhaul, upgrade, and inspection of 33 Attitude Indicators (NSN 6610-01-101-1927 LC, P/N 622-3374-002). The objective is to return these units to a Ready For Issue condition, ensuring they perform reliably in operational environments. The contract includes an initial induction period of 365 calendar days, which the government may extend by an additional year. Offerors must provide option pricing for a maximum of 135 units over the total contract period. Award will be granted to the offeror with the lowest price technically acceptable quote, with past performance evaluated via the DoD Supplier Performance Risk System. The contractor is responsible for providing all labor, facilities, materials, and tooling, as government-furnished manufacturing aids are not provided. Key technical requirements include compliance with ISO 9001 or SAE AS9100 quality systems and calibration standards such as ANSI/NCSL Z540.3 or ISO-10012-1. Specific prohibitions are in place regarding the use of MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead. The contract establishes strict protocols for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA. Deliveries are FOB Destination with a 90-day delivery window, and all packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336320
New
Federal
CONTROL,ELECTRIC LI
Solicitation # N0038326QAA79
Solicitation N0038326QAA79, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside request for quotations for the teardown, evaluation, repair, and modification of the Control, Electric L1 (NSN 7RH 6220-01-435-0198KB, P/N 712860-1). The objective is to return these units to a Ready For Issue condition, ensuring they perform reliably in their intended operational environment. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids such as fixtures or special test equipment. All work must be performed in accordance with the most recent technical publications and approved repair manuals, with specific prohibitions against the use of MIL-W-81381 wire, requiring SAE-AS22759 series wire instead. The contractor must maintain a rigorous quality management system compliant with ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. Key requirements include the maintenance of detailed historical record files for each serial number and the submission of all failure analysis and corrective action reports to the government. While the contractor is granted Internal Review Board authority for minor non-conformances, formal Material Review Board authority for as-is dispositions remains with the government. Award will be made to a single offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important. Deliveries are FOB Destination, and all items must be preserved and packaged according to MIL-STD-2073-1.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
66--PROCESSOR,FLIGHT IN, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBB19
Solicitation N0038326QBB19, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the teardown, evaluation, repair, and modification of Flight Processors (NSN 6610-01-622-1414). The contract covers a maximum of 30 units over a potential two-year period, with a delivery requirement of 90 days and FOB Destination terms. Award will be based on Lowest Price Technically Acceptable criteria, though past performance is noted as more important than price. Because the item is flight critical, government source approval is mandatory prior to award. The contractor is responsible for providing all labor, materials, and tooling necessary to return units to Ready For Issue condition, as the government will not provide manufacturing aids. Strict quality standards are mandated, including compliance with ISO 9001 or SAE AS9100 and calibration standards such as ANSI/NCSL Z540.3. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 and adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. The contractor must maintain comprehensive quality control documentation and historical record files for each serial number, with formal Material Review Board authority for as-is dispositions retained by the government.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 21 days
View Details
NAICS: 336413
New
Federal
IGITAL RECEIVER MO
Solicitation # N0038327RAA16
This solicitation, issued by NAVSUP Weapon Systems Support, is for the teardown, evaluation, repair, and modification of the Digital Receiver MO (NSN 1680-01-599-1106, Part Number 5204400-105) to return the assets to a Ready For Issue condition. The contractor is responsible for providing all necessary labor, facilities, materials, and tooling, with repairs performed according to Raytheon Company drawing 4U884 and applicable technical publications. The contract includes a one-year induction period from the date of award, with delivery measured by a specific Repair Turnaround Time from the date of physical receipt to final acceptance. The contractor must maintain a quality management system compliant with ISO 9001 or SAE AS9100 and adhere to strict documentation requirements, including historical record files for each unit by serial number. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will utilize the DoD Supplier Performance Risk System to assess supplier risk, item risk, and price risk. Key administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and adherence to MIL-STD-129 for marking and MIL-STD-2073 for packaging. The contract also incorporates various FAR and DFARS clauses, including the Buy American Act, priority ratings for national defense, and specific protocols for handling Beyond Economical Repair and Missing on Induction assets. Final inspection and acceptance will be conducted by the Contract Administration Office at the contractor's facility.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
Federal
PANEL,CONTROL,ELECT
Solicitation # N0038326QAA84
Solicitation N0038326QAA84, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside request for quotations for the repair, overhaul, and upgrade of electrical control panels (NSN 6110-01-472-3531). The contractor is responsible for providing all necessary facilities, labor, materials, and tooling to return assets to a Ready For Issue condition, as the government will not provide manufacturing aids or special test equipment. Key technical requirements include adherence to MIL-STD-130 for markings, MIL-STD-2073 for packaging, and a strict prohibition on the use of MIL-W-81381 wire, which must be replaced by SAE-AS22759 series wire. The required repair turnaround time is 100 days after receipt of the asset. The government will make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will utilize the Supplier Performance Risk System to assess item, price, and supplier risk. Contractors must maintain a quality management system compliant with ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. The contract includes specific protocols for Beyond Economical Repair and Missing on Induction determinations, both requiring written concurrence from DCMA. Invoicing and receiving reports must be processed through Wide Area Workflow, with final inspection and acceptance occurring at the contractor's location.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
CONTROL AND STATUS
Solicitation # N0038327RAA14
This solicitation, number N00383-27-R-AA14, is issued by NAVSUP Weapon Systems Support for the repair, teardown, evaluation, and modification of the Control and Status item, identified by NSN 1680-01-582-7988 and Part Number 5204500-100-105. The primary objective is to restore these assets to a Ready For Issue condition in accordance with Northrop Grumman Systems Corp drawings and applicable technical publications. The contractor is responsible for providing all necessary labor, materials, and tooling, while maintaining a quality management system compliant with ISO 9001 or SAE AS9100. Key performance metrics include the Repair Turnaround Time, measured from the physical receipt of the asset to the date of government acceptance, with reporting managed through the Commercial Asset Visibility portal. The government intends to make a single award based on a best-value determination, where past performance is weighted as more important than price. Evaluation will utilize the Supplier Performance Risk System to assess item, price, and supplier risks. The contract includes strict requirements for packaging and marking per MIL-STD-2073 and MIL-STD-129, and mandates the use of the Wide Area WorkFlow system for all invoicing and receiving reports. Special provisions are included for Beyond Economical Repair and Over and Above Repair determinations, both of which require written concurrence from the Defense Contract Management Agency. Proposals must be submitted by November 30, 2026, to the NAVSUP facility in Philadelphia, Pennsylvania.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
Federal
PANEL,CONTROL,ELECT
Solicitation # N0038326QAA83
Solicitation NO0383-26-Q-AA83, issued by NAVSUP Weapon Systems Support, is a request for quotations for the teardown, evaluation, repair, and modification of Electrical Control Panels (NSN 6110-01-472-3513). The objective is to return these units to a Ready For Issue condition through a process of inspection, component replacement, and testing. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Key technical constraints include a strict prohibition on MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead, and adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. The contract establishes a Repair Turnaround Time of 80 days after receipt of assets, with an induction expiration date set for 365 days after award. Performance is governed by high quality standards, requiring a quality management system compliant with ISO 9001/SAE AS9100 and calibration systems meeting ANSI/NCSL Z540.3 or ISO-10012-1. The government utilizes a specific process for Beyond Economical Repair and Missing on Induction determinations, requiring written concurrence from DCMA. Award will be made to a single, technically acceptable offeror based on the most advantageous combination of price and past performance, with past performance weighted as the more important factor.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--NVG,HUD CONVERTER,A, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QQB47
Solicitation NO0383-26-Q-B47, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside request for quotations for the teardown, evaluation, repair, and modification of the NVG HUD Converter A (NSN 7RH 1680 014956018 V2). The contractor is responsible for providing all labor, facilities, materials, and tooling necessary to return these units to a Ready for Issue condition. Key technical requirements include strict adherence to MIL-STD-130 for markings, the mandatory use of SAE-AS22759 series wire in place of prohibited MIL-W-81381 wire, and compliance with ISO 9001/SAE AS9100 quality standards. All work must be performed at the identified contractor facility, and any changes to repair manuals or sources require approval from the Procuring Contracting Officer. The contract establishes specific protocols for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA. Deliveries are expected within 90 days, with inspection and acceptance occurring at the origin. Packaging must conform to MIL-STD-2073-1 and ANSI/ESD S20.20-2021 for electronic protection. Award will be made to a single, technically acceptable offeror based on an evaluation of technical capability and past performance risk via the Supplier Performance Risk System. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336413
New
Federal
16--PREAMP,MAS, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RBA54
This solicitation, issued by Navsup Weapon Systems Support in Philadelphia, seeks a contractor to perform the overhaul, upgrade, repair, testing, and inspection of eight PREAMP,MAS units (P/N 5798-8000-001) to return them to a Ready for Issue condition. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids or test equipment. Work must be performed in accordance with Undersea Sensor Systems drawing 5798-8000-001 and ISO 9001 quality standards. The contract specifies a Repair Turnaround Time of 150 days after receipt of the asset, with an induction expiration date set at 365 days after the award date. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Key administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the adherence to MIL-STD-2073-1 for packaging and MIL-STD-129 for marking. The contract incorporates several critical FAR and DFARS clauses, including the Buy American and Balance of Payments Program and specific requirements for safeguarding sensitive conventional arms and explosives. Special provisions are included for handling items that are Beyond Economical Repair or Missing on Induction, requiring written concurrence from DCMA and the Procuring Contracting Officer.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 26 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Closed
Federal
Food Service Equipment Maintenance & Repair
FA4819 325 Cons Pkp

POSTED

2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 811310
Closed
Federal
Industrial Vehicle Painting Services
FA4819 325 Cons Pkp

POSTED

2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 811310
Closed
Federal
Quarterly HVAC Preventative Maintenance and Evaluation
Upper Colorado Regional Office

POSTED

2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 811310
Closed
Federal
Elevator Inspection and Maintenance
FA4407 375 Cons Lgc

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Scheduled Generator Preventative Maintenance (PM)
W7NU Uspfo Activity Ohang 179

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Comprehensive Generator Overhaul and Diagnostics (Cummins 900kW)
W7NU Uspfo Activity Ohang 179

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Pneumatic Actuator System Inspection & Repair Service
Sflc Procurement Branch 2(00085)

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Trawl Net Repair and Maintenance
Department Of Commerce Noaa

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Commercial Oven Preventive Maintenance
Defense Health Agency Hcd West

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Heavy Equipment & Hydraulic Repair
W07V Endist New Orleans

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
On-Site Medical Equipment Service and Maintenance
255-NETWORK Contract Office 15 (36C255)

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Post-Installation Testing, Training, and Warranty Support
Navsup Flt Logistics Ctr Yokosuka

POSTED

2 months ago

CLOSED

about 2 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS