This Pre-Solicitation opportunity from Department Of Defense was posted on August 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Design and Construction of a Modernized Industrial Wastewater Treatment Facility (Bioplant) at Radford Army Ammunition Plant (RFAAP)

Closed

W519TC-26-R-BIORFederal

Submission Closed08/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 325920

New

Federal

MJU-76/B Flare, Countermeasure

Solicitation # FA821326RB005-Solicitation

The Department of the Air Force is establishing a Multiple Award Contract (MAC) Indefinite Delivery Indefinite Quantity (IDIQ) for the production of MJU-76/B Thrusted Countermeasure Flares for the U.S. Government and Foreign Military Sales. This firm-fixed-price requirement features a five-year ordering period with a sixth-year option. The acquisition is anticipated to be other than full and open competition with limited sources. Due to the nature of the material, all offerors must possess a valid U.S. security clearance of Secret or higher and comply with the National Industrial Security Program Operating Manual. The government intends to award Basic IDIQ contracts to all qualified offerors who are determined responsible and rated acceptable on non-price technical factors. While the Basic IDIQ is unpriced, the first delivery order is anticipated as a buy-to-budget acquisition with an affordability cap ranging between approximately 9.4 million and 11.8 million dollars. Subsequent delivery orders will be awarded using a tradeoff methodology evaluating price and past performance, with CPARS ratings directly impacting the percentage of award splits. Contractors must adhere to stringent quality and safety standards, including ISO 9001-2015 and specific ammunition and explosives safety surveys. Key deliverables include the production units, Ammunition Data Cards via the WARP system, and First Article Testing of 250 units. Delivery timelines vary by price band, ranging from 12 to 24 months after receipt of order or first article approval. All shipments must comply with detailed hazardous material packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1.

POSTED

DEADLINE

1355-01-387-7738 T107 Suspension Band Set MK89 MOD 1

Solicitation # N0010426RK058

Solicitation N0010426RK058, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a competitive invitation for bids for the procurement of T107 Suspension Band Set MK89 MOD1 hardware. The requirement consists of a base quantity of 750 units with a one-year option for up to 80 percent of the total. This is a firm-fixed-price contract with deliveries destined for the NUWC Division Keyport in Washington. Key deliverables include the hardware, first article preproduction test samples, and specific technical data items A001 through A006. The contractor must adhere to strict quality standards, including ANSI/ISO/ASQ Q9001-2008 or equivalent, and follow MIL-STD-1168 for ammunition lot numbering and data cards. The government will utilize a best value trade-off analysis for the award, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate a robust Quality Management System and a proven track record of meeting milestones to be eligible. Proposals must be submitted electronically by November 3, 2026, divided into four volumes: introductory, past performance, small business participation, and price. Special requirements include compliance with CMMC cybersecurity levels, Buy American regulations, and the provision of DoD unique identification for all items. Invoicing must be processed through the Wide Area Work Flow Receipt and Acceptance system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Pre-Solicitation Synopsis - B-1 Parts Reman FY27

Solicitation # FY27_B-1_Parts_Reman_Synopsis

The Department of Defense, through the Aflcmc Ebhk office at Hill Air Force Base, Utah, has issued a pre-solicitation synopsis for the procurement of B-1 aircraft parts and remanufacturing components for Fiscal Year 2027. This requirement, identified under solicitation number FY27_B-1_Parts_Reman_Synopsis and NAICS code 325920, seeks a provider for specific hardware including 72 Mode Selectors, 162 AND Gate Type I units, and 36 Sensor Assembly CAB units. Additionally, the contract requires the delivery of data in accordance with DD 1423-1. The primary delivery destination for the hardware is Tinker Air Force Base, Oklahoma, with a required delivery date on or before April 21, 2028. The data deliverable is required one month after the receipt of the order. There is no set-aside for this procurement, and all responsible sources are invited to submit a capability statement, proposal, or quotation. Interested parties must contact Britney Eggett by the response deadline of November 13, 2026.

POSTED

DEADLINE

Request for Information - Energetics Center of Excellence

Solicitation # W519TC-26-R-0019

Army Contracting Command-Rock Island, acting for the Portfolio Acquisition Executive Agile Sustainment and Ammunition and Project Lead Joint Services, is conducting market research to establish an Energetics Center of Excellence at the Blue Grass Army Depot in Richmond, Kentucky. The initiative seeks to address critical vulnerabilities in the Department of War energetics ecosystem, including aging infrastructure, fragile supply chains, and limited domestic capacity for explosives like RDX and HMX. The government is interested in transformative, commercially sustainable solutions delivered through a Public-Private Partnership that can scale rapidly during surge requirements without relying on recurring government funding for steady-state operations. Desired capabilities include onshoring production of precursors and components, implementing flexible and automated manufacturing, and accelerating the transition of next-generation formulations from lab to full-rate production. All physical infrastructure must be located at the Blue Grass Army Depot and must align with existing Army networks. The government is targeting a rapid implementation schedule of 48 months or less for full project transition and commissioning. While this is currently a Request for Information for market research, the government has indicated a potential intent to award a non-competitive, sole-source Undefinitized Contract Action with a Firm-Fixed-Price ceiling. Responses are due by November 2, 2026, and must include a technical approach, a Rough Order of Magnitude cost estimate, and a sustainable business model.

POSTED

DEADLINE

1377 - MT06 Cartridge Actuated Initiator

Solicitation # N0010427RK007

NAVSUP Weapon Systems Support Mechanicsburg is seeking eligible contractors to provide the labor, materials, and facilities necessary to manufacture the MT06 Cartridge Actuated Initiator, identified by NSN 1377-01-269-6496 and source control drawing 6260964. These components are critical for the egress system of the AH-64 helicopter. Due to a lack of available government data required for manufacture, the government intends to solicit and negotiate with two approved sources under the authority of FAR 6.302-1. This notice serves as a sources sought request rather than a formal request for competitive proposals. Interested and responsible sources are encouraged to submit capability statements by the response deadline of November 12, 2026. The government maintains sole discretion in determining whether to compete the contract based on the responses received, and contractors should be aware that source approval may be required prior to award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

MD92: ME35: ME34/MT61: MT57: MT58: MT65: MD89

Solicitation # N0010427QK001

Solicitation N0010427QK001, issued by the Navsup Weapon Systems Support Mech, is a combined contract action for various supplies identified by multiple National Stock Numbers. The procurement involves specific quantities of items including MD92, ME35, ME34/MT61, MT57, MT58, MT65, and MD89. Due to the nature of the materials, the contract includes explosive ordnance items, necessitating a pre-award safety survey and adherence to DFARS 252.223-7002 regarding safety precautions for ammunition and explosives. The government intends to negotiate with a single source under FAR 6.302, though other responsible sources may submit capability statements. Key requirements include first article and production lot testing, as well as specific shipping terms where LAT and CDRLS are FOB Destination and deliverable items are FOB Origin. The response deadline is November 2, 2027, and the place of performance is located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Thin Layer Explosives (TLX)

Solicitation # W519TC26RA057

Solicitation W519TC26RA057 is a restricted Request for Proposal for a single Firm Fixed Price award to procure Thin Layer Explosive (TLX) and Detonating Cord Assembly (DCA) across multiple DODICS, including JL97, JL98, MU73, MU94, SS97, SS98, and SS99. Managed by the Department of Defense through ACC-RI, the contract requires the delivery of hardware, Lot Acceptance Testing (LAT), and various CDRLs within a base period of 24 months. To be eligible, offerors must provide a valid Qualification Acceptance Letter signed by an authorized Government engineer. Evaluation is based on a trade-off where technical factors, including the proposed project plan and delivery schedule, combined with past performance and small business participation, are significantly more important than price. The contract mandates strict adherence to technical standards, including MIL-STD-130 and MIL-STD-1168 for item marking and Ammunition Data Card (ADC) preparation. Unique Identification (UID) marking is mandatory for investigative units, and all organic materials must be fully traceable to the original equipment manufacturer. Contractors are required to submit a test plan within 60 days of award and must utilize the Wide Area Work Flow Receipt and Acceptance (WAWF-RR) system for invoicing and shipping reports. Compliance with cybersecurity standards, including CMMC and DFARS 252.204-7012, is required to safeguard covered defense information.

POSTED

DEADLINE

MJU-68/B INFRARED COUNTERMEASURE (IRCM) FLARE

Solicitation # FA821327RB00x

AFLCMC/EBHJC is conducting market research through a Sources Sought Synopsis to identify qualified manufacturers for the MJU-68/B Infrared Countermeasure (IRCM) Flare, NSN 1370-01-592-9246. The required product is a thrusted flare with an aluminum case measuring approximately 1.5 by 1.54 by 10 inches and a gross weight of about 1.66 lbs. These flares must be compatible for dispensing from an AN/ALE-47 dispenser and utilize BBU-35 or CCU-145 impulse cartridges for ejection and ignition. Prospective sources must operate under NAICS Code 325920 for Explosives Manufacturing and demonstrate the necessary experience and capability to manufacture the flare. To access technical drawings and documentation, vendors and all subcontractors must possess an approved DD Form 2345 and a Joint Certification Program certification number. The government is evaluating potential for a competitive procurement or a total Small Business Set-Aside, expressing specific interest in 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned small businesses. Interested parties must submit a two-part response including a contractor description overview and answers to market survey questions regarding experience, risk mitigation, and teaming arrangements. Responses should highlight company certifications such as ISO-9001, ASI-9100, or CMMI. The submission deadline is November 6, 2026, and the effort is managed by the Department of Defense at Hill AFB, Utah.

POSTED

DEADLINE

FY27-31 WC864 Ball Powder

Solicitation # W15QKN26RA085

The Department of Defense, specifically the W6QK Acc-Ri-Picatinny office located at Picatinny Arsenal, New Jersey, is soliciting bids for the FY27-31 WC864 Ball Powder contract. This combined type procurement falls under NAICS code 325920 and is managed by the Army. Interested parties must submit their responses by the deadline of October 30, 2026. Primary coordination for this opportunity is handled by Gina Cuiffo, with Bethany Ficacci-Kretzmer serving as the secondary point of contact.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

1355-01-436-4620 CWFP CABLE ASSY, ADCAP F/MK48 MODS 6 AND 7 TORPEDOES

Solicitation # N0010426RK022

Solicitation N0010426RK022, issued by the NAVSUP Weapon Systems Support Mechanics office, seeks a contractor to manufacture and deliver MK62 Mod 1 A Cable Assemblies (NSN 1355-01-436-4620) for use with ADCAP F/MK 48 Mods 6 and 7 Torpedoes. The requirement is a Firm Fixed Price arrangement involving the production of hardware according to drawing 6894510 Rev H, including first article preproduction samples for destructive testing and periodic production lot samples. Key deliverables include a test procedure, test/inspection reports, failure analysis, and monthly progress reports. The contract mandates strict adherence to quality standards, including ASQ-9000, ISO 9001, and MIL-STD-105, with 100 percent inspection required for critical characteristics. The government will award a single contract based on a best value trade-off analysis, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate at least limited confidence in past performance to be eligible. Delivery schedules are based on days after contract award or first article test approval, with shipments directed to various naval facilities in Rhode Island, Washington, Virginia, and Hawaii. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with NIST SP 800-171 for cybersecurity and safeguarding of covered defense information. Following several amendments, the final response deadline was extended to November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Squibs for Fire Sprinkler Valves

Solicitation # N00174-27-SIMACQ-102-0051

The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to Cartridge Actuated Devices, Inc. for the procurement of 50 squibs for fire sprinkler valves, specifically part number 074080-3. This action is being pursued as a sole source acquisition under FAR 13.106-1(b)(1) and 41 U.S.C. 1901, as the company is identified as the only source capable of meeting the government's requirements. The procurement falls under NAICS code 325920 for explosives manufacturing and FSC 1377 for cartridge and propellant actuated devices. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Contract Specialist Shannon Wooten by November 03, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is warranted, though the final decision remains at the government's discretion.

Nswc Indian Head Division

POSTED

DEADLINE

EDRM - Enhanced Drogue Rocket Motor

Solicitation # FA8213-26-R-3036

Solicitation FA8213-26-R-3036 is a firm fixed price requirement issued by the Department of the Air Force, AFLCMC EBHK, for the procurement of Enhanced Drogue Rocket Motors (NSN 1377-01-591-8912 ES, DODIC JN19). These critical safety items, constructed from machined metal and plastic with energetic propellant, are used in ejection seats to provide necessary thrust for altitude gain. The procurement is designated as unrestricted, though Rockwell Collins Inc. has been identified as the sole source. The current requirement specifies 33 units for Lot 1, with delivery schedules set at 20 months after receipt of order for Lot 1 and 26 months for Lot 2. The contract mandates stringent quality and safety standards, requiring certification to ISO 9001-2015 and compliance with DoD 5100.76-M for safeguarding arms, ammunition, and explosives. Key deliverables include a comprehensive set of eleven Contract Data Requirements List items, such as Ammunition Data Cards and Lot Acceptance Test Plans. Due to the hazardous nature of the material, the contractor must adhere to rigorous packaging and marking standards, including MIL-STD-2073-1, MIL-STD-129, and specific hazardous material shipping regulations for UN0186. Inspection and acceptance will occur at the origin, with mandatory source inspection and the use of Wide Area WorkFlow for invoicing and receiving reports.

FA8213 Aflcmc Ebhk

POSTED

10 days ago

DEADLINE

in about 1 month

AI Contract Overview

The Radford Army Ammunition Plant (RFAAP) is a critical national security facility and the last remaining CONUS government-owned site capable of producing a full spectrum of military propellants, including nitrocellulose, nitroglycerin, single-base, multi-base, and solventless formulations. The facility’s legacy wastewater treatment plant, constructed in the 1980s, is now beyond its operational lifespan and functions as a single point of failure, severely compromising mission continuity. Located within the 100-year floodplain, it suffered a forced shutdown during Hurricane Helene in 2024, underscoring its vulnerability. The aging system has also failed to meet regulatory limits under the Virginia Pollutant Discharge Elimination System (VPDES) permit, recording 14 violations in 16 months primarily due to inadequate treatment of biochemical oxygen demand and other propellant residuals. To mitigate these risks and ensure compliance, the U.S. Army is accelerating funding to replace the facility by FY26 through an Other Transaction Authority (OTA) under 10 U.S.C. § 2808a. This initiative seeks to design and construct a modernized, resilient industrial wastewater treatment facility capable of handling 1.5 million gallons per day with a 2.5 MGD surge capacity, incorporating advanced technologies to treat complex chemical effluents while meeting Virginia Department of Environmental Quality standards. The procurement is structured as a two-phase effort, beginning with a competitively awarded OTA for detailed design and pilot testing, with the potential for a follow-on noncompetitive contract to execute site preparation, construction, commissioning, and transition under the same statutory authority if successful outcomes are achieved. Proposals must be submitted in four clearly defined volumes—Technical, Schedule, Price, and Miscellaneous—with strict page limits and formatting requirements, and must be uploaded exclusively via DoD SAFE before the August 20, 2026 deadline. Evaluation is based on three weighted factors: first, specialized bioplant experience including technological feasibility and integration of systems engineering principles; second, schedule realism and risk assessment demonstrated through an Integrated Master Schedule with critical path analysis; and third, price reasonableness and proposed cost share. The contract requires adherence to multiple standards including ASTM, UFC, UFGS, OSHA, and MIL-STDs, with deliverables spanning system requirements, pilot test reports, design packages, commissioning plans, as-built documentation, and O&M manuals. Security protocols mandate CUI training, encrypted

General Info

Draft RFS for bioplant wastewater facility at Radford Army Ammunition Plant; feedback due August 7, 2026; no funding or contract yet.

Agency

Department Of Defense → W6QK Acc-Ri

NAICS

325920 - Explosives Manufacturing

Place of Performance

Radford, VA, 24141, USA

Set-Aside

NONE

Documents

DRAFT Bioplant Statement of Work for Radford Army Ammunition Plant

29 pages · sow

High

DRAFT Request for Solutions for Modernized Bioplant at RFAAP FY26

16 pages · rfs

High

Modernized Bioplant Facility at RFAAP Statement of Work

33 pages · sow

High

Representation and Certification for Modernized Bioplant Facility RFAAP

5 pages · representation-and-certification

High

Representation and Certification for RFAAP Bioplant OTA

5 pages · representation-and-certification

High

RFS W519TC-26-R-BIOR Modernized Bioplant Facility at RFAAP

17 pages · rfs

High

Toxicity Reduction Evaluation for Radford Army Ammunition Plant Bioplant March 2022

687 pages · toxicity-reduction-evaluation

High

VPDES Permit VA0000248 Sampling and Monitoring Requirements

7 pages · specifications

High

W519TC26 R-BIOR RFS Modernized Bioplant Facility

17 pages · rfs

High

W519TC-26-R-BIOR RFS Questions and Responses for Modernized Bioplant Facility

7 pages · q-and-a

High

Appendix 9: Evaluation of RFAAP Bioplant Performance - Contract W15QKN-22-C-0051

34 pages · contract-document

Low

RFAAP Modernized Bioplant Facility Proposal Cover Page

1 page · proposal-cover-page

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

7 updates

PhaseClosed

PostedJul 24

Presolicitation

Notice updatedJul 31

Response deadline changed from Aug 7, 2026 to Aug 20, 2026. The notice description changed.

Notice updatedAug 3

Notice details unchanged. Attachments may have changed.

Notice updatedAug 11

Notice details unchanged. Attachments may have changed.

Notice updatedAug 12

Notice details unchanged. Attachments may have changed.

Notice updatedAug 14

Notice details unchanged. Attachments may have changed.

Deadline changedAug 17

Response deadline changed from Aug 20, 2026 to Aug 28, 2026.

Notice updatedAug 18

The notice description changed.

Response DeadlineAug 28

Deadline has passed

Submission Closed

08/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QK Acc-Ri

Contacts2 people available

OfficeROCK ISLAND, IL, 61299-0000, USA

Organization / AgencyDepartment Of Defense → W6QK Acc-Ri

Office AddressROCK ISLAND, IL, 61299-0000, USA

Contacts

Steffanie L. Adams

Mallory Schmitt

Full Description

Constructed in the 1940s, Radford Army Ammunition Plant (RFAAP) is a critical national security asset, serving as the last remaining CONUS Government-owned facility capable of manufacturing nitrocellulose (NC), nitroglycerin (NG), single-base, multi-base, and solventless propellants. The industrial wastewater generated by these manufacturing processes contains complex chemical components—including solvents and propellant residues (solid, dissolved, or suspended energetic materials)—which must be rigorously treated prior to discharge into the New River.

The legacy RFAAP Bioplant, constructed in the 1980s, is significantly past its useful service life and acts as a single point of failure for plant operations. Crucially, the facility is located within the 100-year floodplain, exposing it to severe operational risks, as demonstrated by an emergency shutdown during Hurricane Helene in 2024. Due to these critical vulnerabilities, project funding has been accelerated to FY26.

Furthermore, the aging facility is increasingly incapable of consistently treating the plant's evolving wastewater streams. RFAAP discharge is strictly regulated by the Virginia Department of Environmental Quality (VDEQ) via a Virginia Pollutant Discharge Elimination System (VPDES) permit under the Clean Water Act. Recently, the legacy plant has suffered a high rate of compliance failure, registering 14 permit violations across three separate incidents within a 16-month period. These violations primarily resulted from an inability to adequately process Biochemical Oxygen Demand (BOD), Chemical

The overarching goal is for the offeror(s) to develop design and construction of a wastewater treatment process and deliver a completed solution to the Government. Follow-On Contracts or Transactions (Phase II): In accordance with the authority of 10 U.S.C. § 2808a, the potential award of a future Other Transaction may result in the award of a follow-on contract or transaction for site preparation and construction without the use of competitive procedures, provided that the initial transaction was competitively awarded, the participant(s) successfully completed the project, and the follow-on is for the same or similar scope of work. Therefore, upon determination that the participant(s) in the transaction successfully completed the design project provided for in the transaction, or in the event that a particularly favorable or unexpected result is accomplished that justifies transition to production, this design project may result in the award of a follow-on contract for advancement to Issue for Construction (IFC) status,
site preparation, construction, commissioning, and transition without the use of competitive procedures.

This RFS is for a contemplated OTA that, if awarded, will be awarded in accordance with 10 U.S.C. § 2028a, Facility construction or repair: transactions other than contracts and grants.

Interest & Question Submittal Deadline: 7 AUG 2026 / 1500CDT

18 August 2026: Update has been made to the .pdf attachment RFS to correct typographical errors wherein an incorrect citation was used (10 U.S.C. 2028a). Those errors have been corrected to 10 U.S.C. 2808a.

Proposal Due Date/Time: extended to 28 August 2026 / 1600CT