This Solicitation opportunity from Department Of Defense was posted on April 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

DETECTOR, MOISTURE C

Closed

SPE4A6-26-T-26C6Federal

Submission Closed04/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

International

University of Alberta - Request for Proposal - CFI High-Performance Liquid Chromatography-Mass Spectrometer (HPLC-MS) and Ultra High Performance Liquid Chromatography (UHPLC) System

Solicitation # AB-2026-06236

The University of Alberta is seeking proposals for the supply, installation, and ongoing support of a High-Performance Liquid Chromatography-Mass Spectrometer (HPLC-MS) and Ultra High-Performance Liquid Chromatography (UHPLC) system. This equipment will be utilized by the Faculty of Science, Department of Chemistry, specifically within the Mass Spectrometry Facility to support various projects involving ESI-HRMS, LC-MS, and LC-MS/MS analyses. This solicitation, identified by number AB-2026-06236, was posted on September 11, 2026, with a response deadline of October 6, 2026. Interested parties should direct inquiries to the primary point of contact, Satinder Atwal, the Senior Supply Consultant.

University of Alberta

POSTED

DEADLINE

Supply of DustTrak DRX Model 8533 External Pumps

POSTED

DEADLINE

Supply of Automated Cell Counter and Analyzer

National Institutes Of Health Olao

POSTED

DEADLINE

Handheld XRF Analyzer Supplier

POSTED

DEADLINE

SCMOS Widefield Camera and Adapter Supplier

National Institutes Of Health Olao

POSTED

DEADLINE

Supply of Flash Point Tester

POSTED

DEADLINE

QX700 E Droplet Digital PCR System Supply

National Institutes Of Health Olao

POSTED

DEADLINE

Temp Controlled 42 Plate Hotel

Solicitation # AB482902

Brookhaven Science Associates (BSA) is soliciting quotations for the procurement of a temperature-controlled plate storage incubator with two stackers and a built-in barcode reader, along with comprehensive on-site installation and training for integration with the Art Robbins CryCam UV imaging system at Brookhaven National Laboratory (BNL). The system must support SBS/ANSI-SLAS, low-profile SBS, and Linbro plates, maintaining temperatures between 4C and 25C. This is a small business set-aside solicitation for a firm fixed price purchase order, with the award based on the lowest total evaluated price from a responsive and responsible offeror. Quotations are due by October 2, 2026, and must remain valid for at least sixty days. The procurement includes strict shipping and pricing requirements. For items under 150lbs, shipping may occur via BSA's FedEx account; otherwise, pricing must be all-inclusive of freight, tariffs, and handling. For foreign products over 150lbs where all-inclusive pricing is unavailable, BNL will act as the Importer of Record under DAP Incoterms. Suppliers must provide the country of origin, Unique Entity Identifier (UEI), and applicable ECCN and HTS codes. All electrical equipment must be certified by a Nationally Recognized Testing Laboratory, and onsite personnel must adhere to stringent security badging and safety protocols, including specific documentation requirements for non-U.S. citizens. The contract incorporates BSA General and Supplemental Terms and Conditions for non-commercial items and onsite work, as well as various FAR clauses.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Solicitation # 140G0126Q0293

The USGS Florence Bascom Geoscience Center is seeking a vendor to provide a Vibracoring System to be delivered to Reston, Virginia, within 60 days of receiving the order. This procurement is categorized under NAICS code 334516 and is designated as a total small business set aside. Interested parties must be registered in the System for Award Management to be eligible for the award. The request for quote, solicitation number 140G0126Q0293, was issued around September 10, 2026, with a response deadline of September 16, 2026. The contract is expected to be awarded on September 17, 2026. All submissions must comply with the Buy American Act, requiring disclosure of any foreign end products and adherence to domestic sourcing requirements.

Ofc Of Acqusition Grants-National

POSTED

DEADLINE

Leica VT1200S Vibrating Blade - Brand name only

Solicitation # 36C25226Q0680

The Department of Veterans Affairs is soliciting quotes for the purchase of a Leica VT1200S Vibrating Blade Microtome for its Research Department. This is a brand name only requirement that includes delivery to a destination in Illinois. The solicitation is managed by the Network Contract Office 12 based in Milwaukee, Wisconsin, under solicitation number 36C25226Q0680. Interested vendors must submit their quotes via email to the contracting officer, Arneil Genus, no later than September 16, 2026, at 1:00 PM CST. This opportunity is open to all qualified providers as there is no specific set-aside designated for this procurement.

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

MADE IN AMERICA REQUEST FOR INFORMATION

Solicitation # 68HE0526Q0019

The Environmental Protection Agency Region 5 Contracting Office is soliciting a request for information under solicitation number 68HE0526Q0019 for the acquisition of a benchtop analytical balance. This equipment is required by the Organic Methods Group within the Laboratory Services and Applied Sciences Division to support the preparation of analytical standards, reagents, and samples for the analysis of per- and polyfluoroalkyl substances, alkylphenols, and low-level pesticides. The procurement is managed by the office located in Chicago, Illinois, with Daniel Olsson serving as the primary point of contact. The analytical balance must meet strict technical specifications, including a minimum readability of 0.01 milligrams and a maximum weighing capacity of 120 grams. Required features include an automated weighing chamber, anti-electrostatic components, and the ability to connect to a Microsoft Windows 11 Enterprise operating system via USB or USB-C. Additionally, the equipment must comply with ISO 17025 certification standards and be certified during the installation process. All packages and documentation associated with the order must be clearly marked with the contract or order number.

Region 5 Contracting Office

POSTED

DEADLINE

Flash Point Tester (FA465926QZ008)

Solicitation # FA465926QZ008

The 319 Contracting Squadron is soliciting quotes for the procurement of one automated Pensky-Martens closed-cup flash point tester for the 319 LRS/LGRF at Grand Forks Air Force Base, North Dakota. This requirement is a total small business set-aside under NAICS code 334516. The equipment must be a new production model from 2025 or newer, compatible with 100-120V and 220-240V power supplies, and compliant with ASTM D93, ISO 2719, and IP 34 standards. The purchase must include a complete test set consisting of a test cup, lid with integrated stirrer, multi-detector sensor, holder set with drip pans, and certified reference material for fuel. Additionally, the vendor must provide a minimum three-year manufacturer warranty and two on-site preventive maintenance visits by a certified service engineer. Quotes are due by September 16, 2026, with a required delivery date of November 30, 2026, shipped FOB Destination. The government will award the contract based on a best-value decision, evaluating technical offers on a pass/fail basis against salient characteristics and conducting a price analysis to ensure reasonableness. Eligible offerors must be actively registered in the System for Award Management and enrolled in Wide Area Workflow, which is the only acceptable means for invoicing. Submissions must be limited to 10 pages and include a completed quote schedule, CAGE code, and DUNS number.

FA4659 319 Cons Pk

POSTED

about 18 hours ago

DEADLINE

in 5 days

AI Contract Overview

This contract involves the procurement of one unit of a moisture detector, identified by NSN 6635-25-163-3362 and part number TA356-678P, with a delivery requirement of 20 days FOB origin to the USS Agusta LCS 34 located in Loxley, Alabama. The contract is issued under solicitation number SPE4A6-26-T-26C6 by the Department of Defense's ASC Commodities Division. The acquisition is governed by detailed technical and quality requirements outlined in the DLA Master List, referencing applicable military standards for packaging, marking, and sampling procedures such as MIL-STD-1916 for inspection and MIL-STD-129 for item marking. The contract explicitly prohibits the addition or contact with mercury or mercury-containing compounds except for specified functional uses. Packaging must comply with DLA packaging standards (MIL-STD-2073-1E and RP001), including specific preservation, wrapping, cushioning, and container codes, and is to be palletized as required. Inspection and acceptance take place at the origin point, with zero tolerance for non-conforming items unless otherwise specified. The contract emphasizes documentation requirements for source approval and removal of government identification from non-accepted supplies, ensuring strict compliance with contract specifications. Points of contact are provided for coordination, with a specified response deadline for vendor quotations and relevant procurement data.

General Info

Procurement of one moisture detector, delivery in 20 days, strict packaging and inspection standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

Contract Value

$2,046.1

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

30665 COUNTY RD 49N,BLD 5 SEC O, D2, LOXLEY, AL, 36551, USA

Set-Aside

NONE

Awardee

SEAHORSE DEFENSE SUPPLY, LLCView Profile

Award Issued Date

05/12/2026, 12:00:00 AM UTC

Documents

(1)

SPE4A6-26-T-26C6.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedApr 19

Solicitation

Response DeadlineApr 27

Deadline has passed

Submission Closed

04/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUSA

Contacts

Katisha Carter

contact@example.gov

+1 (555) 000-0000

Full Description

DETECTOR,MOISTURE C
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
DETECTOR,MOISTURE C
CRITICAL APPLICATION ITEM
AGM CONTAINER CONTROLS INC 08992 P/N TA356-678P
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-26-T-26C6
SECTION B
PR: 7016209393 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016209393 0001 EA 1.000
NSN/MATERIAL:6635251633362
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N20263
USS AGUSTA LCS 34
AUSTAL USA COSAL WAREHOUSE
30665 COUNTY RD 49N,BLD 5 SEC O, D2
LOXLEY AL 36551
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N20263
USS AGUSTA LCS 34
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2026353570293
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
SPE4A6-26-T-26C6
SECTION B
PR: 7016209393 PRLI: 0001 CONT’D
DIC: A41 DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:04/06/2026
SPE4A6-26-T-26C6 NSN/Part Number: 6635-25-163-3362 Quantity: 1 EA Purchase Request: 7016209393QTY: 1 Delivery: 20 days ADO