This Solicitation opportunity from Department Of Defense was posted on May 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
DEXTROSE ORAL GEL
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
Dextrose Oral Gel, 15 grams per unit, packaged in squeeze tubes with twist-off tips, is being procured in lots of three units per package, with a total quantity of one package required under contract SPE2DP-26-T-3281. The product must have a minimum shelf life of 18 months from the date of manufacture, with no less than 15 months remaining at the time of delivery to the government, and this shelf-life requirement is non-extendable. Packaging must comply with commercial standards as specified in the procurement document, with each unit sealed in a protective container to prevent damage or breakage, and all shipments must be placed in suitable exterior shipping containers capable of safe transport at the lowest possible carrier rate to the delivery point. All packaging and labeling must conform to Medical Marking Standard No. 1, superseding MIL-STD-129, and must be marked in accordance with FDA-regulated medical product guidelines. The product is regulated by the FDA and requires confirmation through the EBS referral process prior to award. Delivery is FOB destination within five days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The material is not hazardous under FED-STD-313 and must be commercially packaged per ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over this standard. Palletization must follow RP001 requirements, and shipments must not be sent via parcel post but must utilize the fastest traceable means. The designated delivery address is a U.S. Navy installation in FPO AE 09591, and all vendor markings must include the NSN 6505-01-425-3168, manufacturer part number NDC00574-0069-30 from Paddock Laboratories Inc., and the appropriate DLA vendor codes. The original required delivery date is April 20, 2026, and the product is classified as a TYPE I (CODE K) item under the DLA shelf-life management system.
General Info
Agency
NAICS
Place of Performance
UNIT 100404 BOX 1, FPO, AE, 09591, USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
DEXTROSE ORAL GEL 15 GRAMS PACKAGE OF 3'S
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
IN SQUEEZE TUBE WITH TWIST OFF TIP
1 PG = 3 EA
SHALL HAVE A SHELF LIFE OF 18 MONTHS.
NOT LESS THAN 15 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number,
SPE2DP-26-T-3281
SECTION B
and item description. RS013: Shelf-life requirement RS001 for a TYPE I (CODE K) item with a shelf life of 18 months (non-extendable) applies to this item.
PADDOCK LABORATORIES INC. 55763 P/N NDC00574-0069-30
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016655221 0001 PG 1.000
NSN/MATERIAL:6505014253168
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N21903
USNS WATERS T AGS 45
UNIT 100404 BOX 1
FPO AE 09591
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N21903
USNS WATERS T AGS 45
SPE2DP-26-T-3281
SECTION B
PR: 7016655221 PRLI: 0001 CONT’D
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N219036104S289
RDD: 777
PROJ: HJ5 TP 1
SUPP ADD: YSMEDI SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: 2A FC: E5
Need Ship Date:00/00/0000 Original Required Delivery Date:04/20/2026
SPE2DP-26-T-3281 NSN/Part Number: 6505-01-425-3168 Quantity: 1 PG Purchase Request: 7016655221QTY: 1 Delivery: 5 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS